Picture has noise after export to JPEG

Hey guys,
I am using Lightroom 5.2 64bit version on my windows. After I export my raw in to the jpeg it has noise. But in the develop module it hasn´t. Also it has got a little bit noise in the library, but it´s the same picture. Where is the sense?
Here are some pictures of that problem:
1. The finally edited raw picture which I want to export.
2. The view from the library, you can see a little bit difference on the quality compared to the view from the develop module.
3. The jpeg after the export.
4. My export settings.
I don´t know what to do! I´ve googled a lot but nothing found.
Please help me and post any ideas.
Lovely regards
iAmAzInG

I have the same problem (OS X). Exporting to jpeg results in poor quality. This is a problem I didn't had with previous versions.
I took a look at the other threads which are mentioned here and effectively, the 1:1 view looks exactly like the jpeg export.
But this would be like looking at a 5x6 meter poster from two inches distance, which makes no sense. If you look from a 1 meter distance,
it is logic that you will see a bit less noise, things will look smoother.
This really is an issue. I always had an export and a print that looked exactly like how I saw it in 'fit' view in develop screen in previous versions.
It is completely stupid to be obliged to work in 1:1 mode for developing photos as this is the only option from what I read.
The image ont the left is a screenshot (apple+shift+4) from a jpeg export, 72 dpi, 1288px large side.
The image on the right is a screenshot (apple+shift+4) from a screenshot (apple+shift+4) from de the dev screen in LR, 'fit' view mode, 72dpi 1288px large side.
Both have a different size here because I didn't draw the same sized rectangles when taking the screen shot.
As you can see, there is a lot of noise that I don't see in the dev screen. The screenshot on the right is almost exactly what I see, except that it is a bit less sharper
due to jpeg compression, but it still is a better result than the compression of Lr itself. Should I process like this now instead of using export????
I loose sharpness but it has an overall neater look. The jpeg export is really crappy!
I did used a tiny bit of noise reduction and sharpening (23 - 22 respectively) and this has been shot at ISO 800, 5D miii.
The crop applied in Lr is maybe 8-10% so really not much. I avoid cropping as much as possible.
I updated to 5.3 and issue is resolved for me

Similar Messages

Why is there extra white space after exporting to JPEG?

After exporting an *.ai file to jpeg using 150 ppi and 5 for compression, I have extra white space below the artwork. This has happened in two files after exporting.

Urthie,
What about the Artboard, is that aligned to the Pixel Grid (it is if the size is a whole number of points/pixels and one corner is at X=Y=0 or another set of integer values, otherwise not)?
Edit: Cross posting.
Congratulations, some things are difficult to spot (and guess for others); your finding the solution is the best happy ending.

Popping noise after export

So my song plays just fine in GarageBand, but when I export to iTunes, there are some popping noises that come in (very subtly) at the same parts in the song. Here are some troubleshooting things I've already checked:
1) It is not my speakers -- I've tried two different pairs of headphones, and another set of speakers.
2) I do not have the decibels amped in the GarageBand edit.
3) I've tried reducing the decibel levels to all negatives, and it still pops in the same spots.
4) I've tried exporting the song in all different formats, compressed and uncompressed.
Anyone know of something else that might work? Thanks!

Did you change your song's tempo after recording? If GB has to re-render a sound file, it often introduces artefacts.

Why do my pictures become blurry after exporting from lightroom 5?

My pictures become somewhat blurry or not as sharp after I export them from lightroom 5. PLEASE HELP!!!

If you are looking at your exported pictures in preview.app than that is the culprit. It uses an extremely poor downscaling algorithm for displaying large images and will make every large image, no matter how sharp originally, display blurry. In preview you can hit command-0 (that's a zero) to make the image display 1:1 to see the actual detail. Make sure you have it's preferences in the images panel set to "Define 100% scale as 1 image pixel equals 1 screen pixel". I think in older Mac OS X versions, it was called something like ignore image dpi for display or so but I don't remember. You can also make sure to downscale (with correct output sharpening in the export panel) upon export from Lightroom. If the exported image is smaller than the display, Preview should display 1:1 by default upon opening.

Video has noise after compression

Hi, does anyone know why my videos are showing up wavey after compression is complete?
The following is what's going on:
Video files originally imported to FCPX at 1920x1080p. I then realized I should have imported them at 720p per what has been suggested for exporting videos for web use. I figured I could merely change the settings in compression so I selected Export>Send to Compressor option. I have my video set for 640x360. Other information I have is for size 1450 bytes, 100 milliseconds duration. Video frame rate is currently at 29.97 fps and key frame interval is 30. I've been teaching myself FCPX and digital editing on the job so a lot of this is a foreign language for me.
My video's resolution looks fine before I send it to the Compressor but after the Compressor successfully completes the job, my video wiggles and waves.
Suggestions?
Thanks!

By Web use, do you mean uploading to a site like You Tube? If so, there are Web sharing presets in Compressor that work well for sites like Vimeo and You Tube. Export as a Quick Time movie and then bring that file into Compressor and use the presets.
If not, describe how you're going to use the video.
Russ

Editing RAW images after export to JPEG

Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

White becomes red on export to JPEG - why?

I'm working with photos in lightroom, adjust colors etc. And finally export files to JPEG-format to use them with websites. However: White in lightroom becomes super-soft-red after export to jpeg.
Can someone please help?
Some data that might help:
Macbook, Mac Os Tiger
Lightroom for Mac
Monitor calibrated using Spyder 2
Shooting RAW with SRGB
I've checked all settings in lightroom but don't find any answer.
Thanks in advance
Andreas

>The problem is the difference between my workspace (lightroom) and the resulting JPEG (lightroom export). All my JPEG-exports from lightroom have more red than the version in lightroom.
If you are really exporting to sRGB jpegs (again, shooting in sRGB mode on your camera has NO impact on the RAW files - check whether the export settings in Lightroom are set to sRGB!), there are usually several possible causes for the redshift.
1. Your screen calibration is bad. This is very common and the fix is usually trashing the monitor profile and creating a new one. A common issue is bad monitor profiles supplied by monitor vendors.
2. You are using a wide gamut monitor such as an Eizo, one of the Dell HC screens, etc., and are viewing the exports in unmanaged apps. If you have a monitor that has a gamut significantly different from sRGB, you cannot use unmanaged apps, such as Internet explorer or Firefox 2.0 (basically every windows app except for Vista picture viewer basically), to judge color of your images. You need to use color managed apps, such as Safari, Photoshop, etc. to judge the color. Viewing sRGB images in unmanaged apps on such a screen will make your image appear oversaturated.
3. You are using a dual monitor setup and the OS is confused which profile belongs to which screen. Especially on windows, it is often not possible to really correct for two different screens even if the software tells you it does. This can be hard to diagnose, but usually it just takes plugging out one monitor and recalibrating the one that is still connected.
In conclusion, If you have a typical normal-gamut monitor and you have calibrated correctly, you should see almost NO shift when exporting to sRGB jpegs and viewing in unmanaged apps. The images should look identical in apps that are managed.

After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

need some help here. don't know if i can describe this accurately.
i was using lightroom previously. edit my raw file and then export in jpeg. everything appear normal as what i wanted.
recently i got cs4 and started using bridge. now after i edit my photo in lightroom and export,the view of the jpeg file appears overexpose(exposure was increase) and when view on adobe bridge same problem. but if i open photoshop and use my workspace colour setting everything is ok. when i see my picture on iphoto it is normal as per i have edited. i just don't know what setting i have touch that cause my viewing of edited photo on lightroom and bridge goes overexpose. on bridge,thumbnail ok but preview bad...
for the record: i just install CS4 and snow leopard recently. before this i have no problems with LR. I'm also not sure if i have accidentally change any settings.
i shoot with a 5D mark 2 and use the raw file for edit.
will appreciate any advise. Thanks

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

After exporting - music and pictures out of sync

After using the workaround to attach my six songs as one (using Garage Band - thanks!) to my 434 slides, I tweaked the presentation so that the music and pictures were synced perfectly. However, once I exported them they slowly got out of sync, finally being more that 10 seconds off at the end of the 30 minute presentation (music moved along faster than the pictures). Is there anyway to ensure that what I see at creation stays the same after exporting?

Hi chuck,
I have never used iPhoto for making my slideshows for export, but I have seen enough problems with the syncing in this forum not to even try. I know you don't want to hear this, but I have no problems with perfect syncing using iMovie to make my slideshows.
is this slideshow going to be burned on a DVD?
What did you export the slideshow to? Quicktime?
If Old Toad comes along, he has a lot of good tips.
Lori

Some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

some of my apps wont open my phone has been freezing my mail wont open i took pictures and tent coe up on m phon , and it all has happened after i installed os 7.1.1. what do i do???

Cannot save as jpeg in CS2 after exporting from lightroom

I'm so frustrated. This began happening only a couple times here and there after starting to use lightroom (can't remember if it was the 1.4 version, or the beta version). I don't think it's my photoshop program, since I have completely re-installed it twice and reinstalled onto my computer.
Anyway, now it's happening all the time. I export images from lightroom into CS2 to make final edits, sharpen for print, crop, etc and then photoshop will not let me save it as a jpeg. I can save as a psd, or a tiff, but not a jpeg. I have tried exporting in jpeg format, or tiff format, and everything is fine until I try to save either type as a jpeg. It lets me choose the quality, 10-12 etc, then when I click OK, A red box with "could not complete your request because of a program error" pops up.
I have Vista, edit in sRGB, export in sRGB, etc..... just don't know what to do since I NEED to be able to edit and save to send to print. Please help.

Find the solution here:
http://www.flickr.com/groups/adobe_lightroom/discuss/72157607023379578/
basically you delete the camera raw info put into the file that trips up CS2 (but not CS3!)

Pictures in insert in form central not visible in pdf formular after export

Why it is not fisible to see the picture in the pdf formular after export from FormsCentral

Hi,
Please refer to the following FAQ document: http://forums.adobe.com/docs/DOC-4144
Post back to this thread if it doesn't help to resolve the issue.
Regards,
Brian

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

When I leave my iphone in my room and went out. After I came back, I find several apps which was not opened before had been opened. It here are also 8-10 photos of my ceiling being taken, includes video. Also my home page picture has been changed.

also my sister said she heard music being played fr my phone suddently. Is my iphone being hacked?

Picture has noise after export to JPEG

Similar Messages

Maybe you are looking for