Picture in table appears cut with thin lines

I'm working on my CV and now I'm hampered by the following misbehavior of Pages:
I made up a table with 7 rows and 3 columns. The 2 leftmost columns contain my personal data, the rightmost colum stretches over all rows and contains a picture of me. Now when I export the document, the picture appears cut with horizontal lines. As if the table rows cut the picture into pieces. Unusable.
Anyone confirm this misbehavior?
Is there a workaround?
And: how do I file this as a bug?

kbostroem2 wrote:
I'm working on my CV and now I'm hampered by the following misbehavior of Pages:
I made up a table with 7 rows and 3 columns. The 2 leftmost columns contain my personal data, the rightmost colum stretches over all rows and contains a picture of me. Now when I export the document, the picture appears cut with horizontal lines.
I apologize but I'm not a sooth sayer.
To which format are you exporting?
Word or PDF ?
Yvan KOENIG (VALLAURIS, France) samedi 26 septembre 2009 16:11:05

Similar Messages

Marked objects connect with thin line

I work in CS6. When I mark two or more objects they automatically connect with a thin line (and a white square) between them. They are still two separate objects, but the connection between them is shown (and they can be dragged together). Is it possible to change this setting?

That's the selection bounding box, and no, you can't change it.
The bounding box is going to change to be the smallest rectangle that completely encloses all of the selected objects and may look quite different from what you describe if the objects are not the same size and aligned vertically or horizontally.

Enhancement request : Table - Data -- Filter with multiple lines

It would be nice when the Filter option in the tables Data tab could contain multiple lines, because :
In case of a complex where clause on a table (used in a query) it's hard to get an impression of the filter because everything is typed on one single line.
In case of multiple lines it's also more easy to disable a single clause temporary with a double dash (--) at the start of the line instead of searching in a complex filter where to put /* ...*/
Eric.

What I mean is the Filter option when displaying the data (Data tab) of a table. You have the possibility to enter a Sort and a Filter (to reduce the data that is displayed). That Filter option has no possibility to enter multiple lines. So there is no way to 'format' the filter which would be nice in case of complex or large 'where clauses'.
What would you prefer, this (multiple lines) ?
AND ( p_peildatum IS NULL
OR
TRUNC(p_peildatum) BETWEEN TRUNC(dnm.datum_ingang)
AND TRUNC(NVL(dnm.datum_einde,p_peildatum))
AND ( p_ondergrens IS NULL
OR
TRUNC(p_ondergrens) <= TRUNC(NVL(dnm.datum_einde,p_ondergrens))
or this, like it is now (everything on one single line) :
( p_peildatum IS NULL OR TRUNC(p_peildatum) BETWEEN TRUNC(dnm.datum_ingang) AND TRUNC(NVL(dnm.datum_einde,p_peildatum)) ) AND ( p_ondergrens IS NULL OR TRUNC(p_ondergrens) <= TRUNC(NVL(dnm.datum_einde,p_ondergrens)) )
Eric.

Screen going light gray with thin lines...

throughout the entire screen...vertical lines...first time this has happened...
I've got a late 2008 mbp...last one before the move to unibody i think...mbp 4.1 it says for model identifier...
this didn't affect the large screen i have attached to the computer, only the laptop screen...
after a few minutes the screen turned back to normal...
did a hardware test and got this result:
4vdc/1/40000003:video controller
it then said detach all attached items and do extended hardware test...which I did and got the same result...
Can someone tell me if i need to send my computer to Apple please?...my apple protection plan is good until April 4, 2011...
right now the screen looks normal, but the hardware test shows i have a problem...
thanks for any help and advice...
M

Just an update...spoke with apple here this morning and I have an appointment for Monday morning to bring the computer to an apple store, guess it's the genius bar, and they'll check it out...I'm happy to be able to discuss what's going on with someone...happy they opened this really big store here in Montpellier last year...
The woman I spoke with suggested doing an archive and reinstall of my system before the meet...I'm not sure why...this seems to be a hardware problem, at least that's what the Apple Hardware Test shows...but I may try that tomorrow...any harm in that?...
also, my screen is now normal, not showing signs of there being a problem, so I'm wondering how this will be handled...but I do know if he/she pops in the disc and does another hardware test the problem about an error will be there...I tried the test again this morning and got same result...
anyway, I'm just worried about the logic board/nvidia card blowing up 'after' my apple care expires next month...I'll voice my concerns at the Apple store on Monday...

I have iPod touch 4. It has a white screen with thin lines& an image like it's broken but it's not. It has the battery icon & is unresponsive to touch. Already tried restore but no change. Any ideas??

try holding the home button and the on/off button for about 10 seconds(until the apple logo pops up)

Passing an internal table WITH HEADER LINE to abap object

Hi. In another thread, it was explained how to pass an internal table to an abap object method. Is it possible to pass an internal table that has a header line, and RETAIN the header line once the table has been passed?
My problem is, that I can pass the table, update it, but the read buffer is not populated when returning from the object's method. This is the result of being able to pass a STANDARD TABLE type, but not a STANDARD TABLE WITH HEADER LINE.
This means that I have to read the table into a work area instead of doing a READ TABLE LKNA1 within the method, which is what I need to do.
Thanks.

Please check this sample program, notice that it is modifing the internal table and passing it back modified as well as passing the "work area" or "header line" back thru the exporting parameter.
report zrich_0001.
*       CLASS lcl_app DEFINITION
class lcl_app definition.
public section.
    types: t_t001 type table of t001.
    class-data: it001 type table of t001.
    class-data: xt001 like line of it001.
    class-methods: change_table
                                exporting ex_wt001 type t001
                                changing im_t001 type t_t001.
endclass.
data: w_t001 type t001.
data: a_t001 type table of t001 with header line.
start-of-selection.
select * into table a_t001 from t001.
call method lcl_app=>change_table
             importing
                 ex_wt001 = w_t001
             changing
                 im_t001 = a_t001[] .
check sy-subrc = 0.
*       CLASS lcl_app IMPLEMENTATION
class lcl_app implementation.
method change_table.
    loop at im_t001 into xt001.
      concatenate xt001-butxt 'Changed'
           into xt001-butxt separated by space.
      modify im_t001 from xt001.
    endloop.
    ex_wt001 = xt001.
endmethod.
endclass.
Regards,
Rich Heilman

With header line & with out header line ?

what is difference between with header line & without header line ?

When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
1 1
2 100
3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Internal table with header line
you can use anywhere except obkect oriented concept.
Internal table without header line :
You should use in Object oriented concept..
Always try to use without header line,performance point of view it is best..
Example :
Without header line.
Structure
types : begin of ty_itab ,
matnr type mara-matnr,
end of ty_itab.
Internal table
data i_itab type standard table of ty_itab .
Work area
data wa_itab like line of i_itab
With header line
data : begin of i_itab occurs 0,
matnr like mara-matnr,
end of i_itab
itab with header lines are obsolete, anyway it will work but not recommended. instead use work area or more effiecient is field symbols. so donot use itab with header line.
i will explain use of itab w/o header line.
Data: itab1 type standard table of mara with header line occurs 0,
itab2 type standard table of mara,
wa_itab2 type mara.
loop at itab1.
"This will work fine.
endloop.
loop at itab2.
"This will give erro that itabd does not hav workarea
endloop.
"so write
loop at itab2 into wa_itab2.
"This will work
endloop.
<b>The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line</b>
regards,
srinivas
<b>*reward for useful answers*</b>

Aipar Air has a thin Line in the screen.

I bought a Ipad air one month ago it was working fine, but the last week appeared a dotted thin line across the screen (vertical), but in this moment there are others thin purple lines. How can i Fix the problem?.

Hello there, NelsonMejia.
The following Knowledge Base article gives us a few recommendations for troubleshooting issues with your display:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Display image issues
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
If the issue persists, there are recommendations at the end of the article as well:
My issue is still not resolved. What do I do next?
Contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Trouble with fonts/lines weight

Hello everyone,
I am coming to you because I have a problem for which i cannot see any solution... I am not specialized in indesign, but yet I used it for a long time and this problem looks really strange for me. I will directly show you a picture :
Here are also diret links to bigger pictures :
http://i83.servimg.com/u/f83/10/05/57/17/bold10.jpg
http://www.servimg.com/u/f83/10/05/57/17/light10.jpg
(right click > open in new tab, then switch between tabs to see the problem)
As you can see, the weight of text and lines change between the documents. The problem is, there are supposed to be exactly the same, as they come from the same master. (these pictures are just an example, i have the same problem for about half of my pages). When I unlink both from the master with ctrl+shift+click, then i delete the light one and try to copy the bold one, the problem remains, showing it is not an object issue but more a page issue. Problem is, I created those pages by dupplicating them when needed... so they really should be the same.
Of course, i thought at the beginning it was an indesign problem, but when I export it to pdf, the problem remains. And the worst is, it is still there after print, making the light one almost unreadable.
When i export to eps and put it in adobe distiller, the problem is fixed for texts! But it remains on any non-text object, like the scissors and scissors-lines.
I don't really know what I can do, and my timeline is getting really close. Thanks in advance for reading, and thanks alot to anyone who can give me an idea of what to look for.
Please note that i use indesign cs6.
Regards,
Antoine

Yeah this is something i've done, because the text above we don't see here is bigger. But it sure isn't because of this, as I have said I have the same probleme on lots of pages, and it does it for the whole content of the page, including master's elements or unique elements. Only objetcs where there isn't problem is on imported photos... Also, please note that i see the problem on high quality offset industrial printers, the one which will be used to print the thousand of pages in a few days.
Ok i just tried a lot of things to upload the pages here. I went through modifications and all, to send you two fake pages. At the end of modifications the problem was gone... So by watching every step of the modifications i made i identified the problem :
The lines and fonts get thin when i put pictures on the spread (it gets thin if i put pictures on the facing page also) and it's getting back in bold when i delete them. Now that i know this, i can see that indeed every pages with pictures are the pages with thin lines... the thing is, i will have to put pictures on every pages.
Pictures are psd in CMYK japan coated if this can help.
I'll let you know if i find the solution, in the meantime thank you if you have any tip
If i don't find anything i may just make the font a bit bolder, but I don't really like this solution because text placement is really precise in some pages.
Thanks a lot for your answers!

Alternative for 'WITH HEADER LINE' ?

Hello All,
In BSP's I gues we can't use table with header lines and occurs 0.
SO whts the alternative for this ?
I want to use the FM 'GET_COMPONENT_LIST' .
To this FM I need to pass the table which is declared with occurs 0 or with header line .
Eg:
DATA: lt_cols TYPE STANDARD TABLE OF it_cols with header line.
DATA: v_count TYPE i.
CALL FUNCTION 'GET_COMPONENT_LIST'
EXPORTING
    program    = sy-repid
    fieldname = 'LT_COLS'
TABLES
    components = itab[].
DESCRIBE TABLE itab LINES v_count.
WRITE v_count.
" I've used the following code :
      DATA: ls_final_t    TYPE STANDARD TABLE OF mara initial size 10 ,
            lt_rstrucinfo TYPE TABLE OF rstrucinfo .
      CALL FUNCTION 'GET_COMPONENT_LIST'
        EXPORTING
          program    = 'CL_O243NHIEBSRAZZG8RPTVGL3YAH9CP'
          fieldname = 'LS_FINAL_T'
        TABLES
          components = lt_rstrucinfo[].
But it's not working .
I guess the problem is wid passage of parameter for program.
Bcoz i tried the same in the ABAP Program and it's working !
SO can any one tell me what to pass for the program ?
I tried with sy-repid , hardcoded my BSP application name , but none of them worked !!!
Can anyone help me out ?
Regards,
Deepu.K

Hi Depp,
The problem with your code example is that you should not have used the [] addition to the table name.
Try this...
      CALL FUNCTION 'GET_COMPONENT_LIST'
        EXPORTING
          program    = 'CL_O243NHIEBSRAZZG8RPTVGL3YAH9CP'
          fieldname = 'LS_FINAL_T'
        TABLES
          components = lt_rstrucinfo. "Note change here!
It is a good idea to get used to working with tables without header lines. I like to use data references where possible.
For example...
DATA: i_tab TYPE TABLE OF sflight,
        w_ref TYPE REF TO sflight.
* Append line to table
APPEND INITIAL LINE TO i_tab REFERENCE INTO w_ref.
w_ref->carrid = 'AA'.
w_ref->connid = '123'.
* Loop through table
LOOP AT i_tab REFERENCE INTO w_ref.
    WRITE: / `ConnID is `, w_ref->connid.
ENDLOOP.
* Read line
READ TABLE i_tab REFERENCE INTO w_ref WITH KEY connid = '123'.
Cheers
Graham Robbo

Send Internal table to mail with Colman name

Hi,
how can i send the content of internal table to mail ,
i try to convert to HTML and send it but the problem is that i don't get the column name ,
there is another way to send the IT with the column name ?
any e.g will help i am stuck ....
Regards

you can use upto here..and then you can send html table as attachement in the mail
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
" Html Table
*- Declare Internal table and Fieldcatalog
it_fcat TYPE lvc_t_fcat WITH HEADER LINE." Fieldcatalog
DATA: i_table TYPE REF TO data,
wa_line TYPE REF TO data.
FIELD-SYMBOLS: <fs_tab> TYPE STANDARD TABLE,
<fs_wa> TYPE ANY.
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
PARAMETERS: p_table(30) TYPE c.
* S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
*-Populate the Fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_table
CHANGING
ct_fieldcat = it_fcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat[]
IMPORTING
ep_table = i_table.
ASSIGN i_table->* TO <fs_tab>.
* Create dynamic work area and assign to FS
CREATE DATA wa_line LIKE LINE OF <fs_tab>.
ASSIGN wa_line->* TO <fs_wa>.
SELECT *
FROM (p_table)
INTO TABLE <fs_tab>
UP TO 20 ROWS.
* E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and cell properties
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>DB Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
it_fcat-scrtext_l
'</th>' INTO t_html-line.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT <fs_tab> ASSIGNING <fs_wa>.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate entire row of HTML table
DO v_lines TIMES.
READ TABLE it_fcat INDEX sy-index.
CONCATENATE '<FS_WA>-' it_fcat-fieldname INTO v_field.
ASSIGN (v_field) TO <fs>.
t_html-line = '<td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = <fs>.
APPEND t_html.
CLEAR t_html.
t_html-line = '</td>'.
APPEND t_html.
CLEAR t_html.
CLEAR v_field.
UNASSIGN <fs>.
ENDDO.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.

Thin lines on PDFx1a have printed on final job!!!

We recently produced a final print PDF for the front cover of magazine and all was well. No Lines as normal.
However, when this same PDF of cover was placed back into Indesign as part of a promotional poster, the final PDF appeared have some thin lines in 3 places. They were visible when PDF was viewed at 800% and above, and we initially thought that they were part of the 'Atomic Regions' set out by the flattening process. Anyway, these lines have printed and now we are wondering how to avoid this in future
As I say it only appears to happen when placing the Cover version of PDF back into Indesign file and a new PDF is created.
Does anyone know how to get round this without rasterizing PDF and changing to a bitmapped image. After all we want to keep all vector items as original cover, as poster is quite large.
I look forward to a reply
Many thanks,
Scratchy Head Man

Take it to an Apple Store or other service provider for testing.

IPhoto: No pictures only broken-line/square boxes where pictures should be. Scanning with the bar slide the pics appear for one or two seconds then are gone.

Grandson Son sabataged my IPhotos! Can't get pics to appear. Only broken-line/square boxes where the pictures should be. Scrolling with side bar brings up pics for 1 or 2 seconds then they are gone again. HELP! Please....
Raefisch

Restore from your back up is the most obvious way forward.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Problem with Thin White Line in PDF

I am encountering an appearance issue in a pdf created from a FrameMaker 11 file, using Adobe Acrobat X Pro and Adobe Acrobat Distiller X. The pdf displays a table that has black lines running vertically between every other column. In the column in between these lines, there appears to be a thin white line displaying. If I enlarge the pdf to 200%, the white line disappers. I right-clicked on the pdf and in the menu under "Page Display Preferences ...", I chose "Page Display" under the "Categories" column and then "Rendering". I then iuncheck the "Enhance thin lines" feature and this removes the thin line from the pdf. However, if I process another pdf for a different FrameMaker 11 file, the "Enhance thin lines" feature is unchecked and this affects the appearance of these other pdfs. Consequently, I need to reselect the "Enhance thin lines" feature in order to process these pdfs. However, if I reselect this, I'm noticing that when I open the pdf that has the thin line issue, the thin line is visible and the "Enhance thin lines" feature is selected. Is there a way to adjust this, so that the "Enhance thin lines" feature is removed for only this one pdf, but is selected for the other pdfs?

I think you are seeing Stitching Lines. If you can zoom in and the width does not change, they likely stitching lines. (Any actual content should scale proportionate)
Do a search for the term .
Stitching Lines are an on screen artifact which do not print (on high resolution ouput) caused by transparency flattening. You use of Distiller joboption probably invokes flattening.
Enhance Thin Lines is a local preference of Acrobat. I doubt it could be retained in a file.

Picture in table appears cut with thin lines

Similar Messages

Maybe you are looking for