Picture in text body

hi all
How to send a mail with pictures in text body ?

Its not the right place to discuss....any way....
Just open the function module
SO_NEW_DOCUMENT_ATT_SEND_API1  and see the Documentation,.....at the last you can see a sample code how to send amail in .bmp IMAGE file...Hope this helps...next time please post in the relevant forum...
regards
sas

Similar Messages

  • I want to insert a picture into a body of text in a blog entry page.

    This has me stumped. I did it once but cannot do it again.
    How can I place a picture into a body of text? I have a print-out from the HELP menu but it is not clear. It talks of inline and fixed objects. I think I want a fixed object -- one that does not move along with the text as the text grows/moves along the page incrementally.
    Because I am working with the photo on a blog entry page I cannot do the Choose Insert > Choose > Select the file, and click insert. I cannot because (1) The picture has to stay on the page in that Magic Frame, and (2) the choosing capability of the iWeb program does not enable someone to go inside the iWeb program and land on a certain page.
    I am working on the blog page. Instead of a tiny little picture of a doll at the top of the page, I want to raise all of the text and put the little doll's head inside the text body.
    I am so stumped. The instructions are not clear at all.
    Lorna in Southern California
    Fri, Sep 15, 2006 11:52 PM PST

    Well i did exactly what your trying to do...go to
    http://www.mac-switch.com
    and view the blog "power button shortcut"
    Go to the section you want to add the photo
    to...Click "insert" then "choose" and choose the file
    you want to put in there.
    Good luck
    Rob.
    Hi Rob......
    You know, I went to that Power Button Shortcut blog and for the life of me, your point went flying over my brains -- I just did not get what point you were making to me. The Power Button thing was not what I was trying to do. I was trying to put a PICTURE of a doll's head inside a body of text. That means I had to get text wrap to kick in, and..........
    But the bottomest line is, I finally did it. I don't know how I did it because I was in a state of just clicking around, trying to move text. It's a long story to duplicate, but I went through several steps and since it was just desperation moves I was doing, I don't have a set of notes to go by for the next time.
    The hard part, or one of them, was to get the Text Inspector to make he Text Wrap workable. For a long time , no matter what I did, the Text Wrap option remained greyed out. It was maddening. Then for reasons that I cannot recreate in an orderly fashion, I got the Text Wrap option to get bolded out, and thus an option.
    Thank you for trying. BTW, I think your pages look wonderful and very slick (which I think is the right look for what you want to do with your website).
    Lorna in Southern California

  • Pictures and text boxes in rtf template

    Hi there,
    are there any general rules for applying pictures and text boxes to rtf-templates?
    As far as I have experienced, the text boxes are not shown when generating a report. Is it generally not possible to display text boxes? Are there any work arounds?
    Thank you,
    BR
    Lena

    Hi,
    do you mean instead of text boxes?
    Yes, that is no pborlem.
    Are there any known issues regardings pictures and any other design elements?
    Thank you!
    BR
    Lena

  • My iPhone 5 won't allow me to open pictures from text messages.

    My iPhone 5 won't allow me to open pictures from text messages. I tap the picture, then it just goes to a "thinking" screen and says "Restoring..."
    I tried restarting, but it still won't allow me to open pictures.
    Please help!!

    My iPhone 5 is also having this problem. I just received it2 days ago and it would let me open mms messages, but ever since yesterday it will have a loading screen and never let me see it. I've just been having to save my picture into my camera roll and view it that way

  • Cannot send pictures via text message since software update...HELP!!!!

    Although I am a BIG FAN of BB Torch (have had several), BUT since it was discontinued, I had no choice but to "up grade" to BB Z10...IT was working just fine...NOT as good as the Torch though, but I was getting use to it...TILL the new software came along last week (Tuesday), so after doing just that, up dating my phone, I saw that I was NOT able to send or receive pictures via text message. I did called ATT, deleted everything, resintalled my data/information...and STILL nothing.
    I "google" the problem, and was sooooo SAD to find out that I was NOT the only one, and that THIS problem is AN OLD ONE (2013), but BB has done nothing to fix it.
    I did read on of the technical support answers and followed every single step, but STILL NOTHING, NADA...no able to send neither receive pictures...PLEASE, PLEASE HELP ME!!!!!!

    Well, interesting... glad it worked out.

  • Adobe Photoshop Touch: Disable snapping in when moving pictures and text

    Hallo,
    I really have to disable that snap in when I move imported pictures or text in a file in Adobe Photoshop Touch but. I didn't find a feature yet to disable it.
    Can you help me please?
    Thank you.
    schokomueller

    For either importing images or adding text, there's a magnet icon with a checkmark in the options box; tap it to disable snapping.

  • My iPhone 3GS is no longer able to send pictures via text??

    I've done a total phone reset, taken it to the ATT store (they checked all the MMS settings and they were correct), sync'd it to itunes and downloaded all updates...but still can't gte it to send pictures via text?
    This all started last Monday when I traveled out to las Vegas...every picture I tried to send would get the status bar about 95% across on the send before popping up a red exclamation point next to the picture that gives me a "message failed to send" error. Here's a screen cap:
    [IMG]http://i21.photobucket.com/albums/b270/firebird1999us/securedownload.jpg[/IMG]
    Any ideas?

    I had same problem. Check your Settings/General/Network/Cellular Data Network - make sure your MMSS has 2 // After http, ie, http//... If you have to change this, make sure you switch iPhone off and restart after 20 seconds, go back to your settings to make sure changes have stayed put. Then take a photo and MMS it to yourself, this will take a minute or 2 to go through.
    Hope this works for you

  • I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    I just bought a new iPhone and accidentally backed it up with my old iPhone backup, I do not want this. I lost everything on my new phone and I need it back. PLEASE HELP! This includes pictures and texts, etc.

    So just to be clear, when you say "just bought" how long ago was that? Is it on this new iPhone that you had pictures, texts, etc that you want? Were you backing up to iCloud or onto iTunes?
    This may not help for everything but if you go to iCloud.com and log in, are you able to find your pictures there?

  • How to send plain text body in HTTP Post method ?

    Hi Exeperts,
    I have a scenario http post - ptoxy. Sender sending the data in http post in plain text body (only field values will be in the body).
    how should i capture this plain text for receiver to map..
    is any udf or xsl code ?
    please guide me for achieving this requirement .
    find the attachment for http post body value.
    Regards
    Ravi

    Hi Mark,
    Thanks for your reply,
    Please share you have any udf  for this .
    can you explain me how should i map to target side.
    what are the configuration should i done in communication channel level
    Regards
    Ravinder.s

  • Hi - Need advice on placing pictures and text within DIV's

    I am new to CSS and am creating DIV's to structure my page.
    I am trying to do two things and i imagine the solution will be similar or the same for both issues.
    Firstly I have created a container DIV in the centre of my page, within that I would like to place pictures and text.
    My questions are
    How do i get one DIV to sit beside another one? it is defaulting to sitting underneath it, I have adjusted the box size etc.
    When adding text I would like it to sit next to the picture (located in the top left corner)  it is currently sitting below the picture.
    many thanks
    Mark

    Here is a tut on positioning divs's:
    http://www.brainjar.com/css/positioning/
    When adding text I would like it to sit next to the picture
    You can create a class to float the picture left, something like this:
    .pic_left {
        float: left;
        padding: 5px;
        margin-top: 0;
        margin-right: 0;
        margin-bottom: 5px;
        margin-left: 0;
    When it's floated left the text will be next to it.
    Your markup would be:
    <img src="images/picture.jpg" alt="xxx" width="175" height="165" class="pic_left" />
    Then add the text.

  • How do you verify the size of a large ( 32K) plain text body

    Hello All,
    I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
    When I attempt to process a message, that contains only a plain text body with a size (in bytes) of 64,382 - the following sizes are reported by objects extracted from GroupWise, via SOAP calls:
    Message Size: 71,425 (should be bigger than the plain text body).
    Message Part [0] length: 70,854 - no idea where this value comes from
    In the getAttachmentResponse object, the part has:
    length: 87,772 - Which matches the Base64 encoded length, plus padding, of the plain text.
    The actual size of the plain text (on disk): 64,382
    I am hoping to use the HTTP GET method for extracting the large plain text object, which means that I will not have access to the getAttachmentResponse object.
    So my question is, based on the MessageBody, MessagePart[0] length of 70,854 - is there a formula, or other way to determine the correct expected byte size of the plain text object to enable me to verify that the HTTP GET operation or the SOAP getAttachmentRequest completed correctly?
    Regards,
    Dave Stiller.

    Hey Preston,
    Thanks for the prompt response. Not the answer that I was seeking, but none the less an answer. Thanks.
    Can I suggest an enhancement for a future release, to add an additional structure to the message object that allows you to detail the available formats and byte sizes of the formats that relate to the message body object. This could even be an extension/completion of the MessagePart object array on the Message Body. (One array component for each available format.) There are no issues when dealing with large body texts as attachments, but an accurate byte count is important to me.
    This will enable us to verify that the message body content, downloaded from GroupWise, has not be corrupted during transfer - particularly important when using HTTP requests.
    Have a great day,
    Dave...
    Originally Posted by Preston Stephenson
    You will have to be careful in getting message bodies.
    The plain text message body can come from different
    sources and / or formats.
    The message body can be stored in RTF format.
    You can extract the plain text from the RTF text.
    If there is a text.htm message body attachment, the
    GW Client will extract the text plain text from the
    text.htm attachment and will ignore the text plain
    message body attachment.
    There can be corruptions in the message body
    attachment. The attachment can report a certain
    size, but the actual data may be different.
    You have to assume what is stored / returned is
    correct. If you are bound and determined to read
    the number of bytes recorded, you can cause
    problems. There was one case where the attachment
    was corrupt. The POA returned all the data that
    was available. The application tried to read past
    the end of the valid data and caused the POA to
    crash.
    You get all of the data in one HTTP GET call. In
    that case, the "Content-Length" header will have
    the number of bytes in the message body attachment.
    Preston
    >>> On Sunday, August 12, 2012 at 11:36 PM,
    stillerd<[email protected]> wrote:
    > Hello All,
    >
    > I am running GW 8.0.2 Hot Patch 3, using SOAP schema 1.04.
    >
    > When I attempt to process a message, that contains only a plain text
    > body with a size (in bytes) of 64,382 ‑ the following sizes are
    reported
    > by objects extracted from GroupWise, via SOAP calls:
    >
    > Message Size: 71,425 (should be bigger than the plain text body).
    > Message Part [0] length: 70,854 ‑ no idea where this value comes from
    >
    > In the getAttachmentResponse object, the part has:
    > length: 87,772 ‑ Which matches the Base64 encoded length, plus padding,
    > of the plain text.
    >
    > The actual size of the plain text (on disk): 64,382
    >
    > I am hoping to use the HTTP GET method for extracting the large plain
    > text object, which means that I will not have access to the
    > getAttachmentResponse object.
    >
    > So my question is, based on the MessageBody, MessagePart[0] length of
    > 70,854 ‑ is there a formula, or other way to determine the correct
    > expected byte size of the plain text object to enable me to verify that
    > the HTTP GET operation or the SOAP getAttachmentRequest completed
    > correctly?
    >
    > Regards,
    > Dave Stiller.

  • Anchored pictures in text box 'drift'

    http://www.houselavigne.us/Media/Photos.html
    I have a problem with anchored pictures 'drifting' down our 'Photos' page so that by the bottom they no longer line up with their description.
    I used the 'About Us' page in the Travel template and just copied and pasted the sample picture and text area from the Our Photos text box until I had enough for all of our albums. In iWeb the pictures each have an anchor point on the line above their description so that they appear with their bottom edge lined up with the bottom edge of the date line:
    (anchor)
    Description
    Date
    And in iWeb the pictures line up with their anchor point and date line all the way down the page. When I upload my site and view it in Safari the pictures start to drift slowly down the page, so that the last picture at the bottom of the page is several lines below it's date line.
    In the original template each picture is 45 x 45 pixels and they are still that size in my modified version... Unfortuniately troubleshooting takes a VERY long time with a site this large.
    Has anyone else had trouble with this?

    I noticed todya on a Windows PC that the anchored pictures stay put, it's only when viewed on a Mac that iWeb's formatting doesn't work.

  • Why am I having trouble sending pictures through text message?

    Why am I unable to send a picture through text message?  I have an iphone 4s. This never happened with my iphone4. I am about to switch and give my preteen my upgrade and take my old phone back. This was a waste of money. This is with both people who have Iphones and people who don't. (IM and regular text). I can randomly get one to go through, but it usually gets to about 90% and freezes. I can usually upload photos to Facebook. This is such an elementary function for a phone!!!!

    1. you should contact your phone carrier as they handle all messaging.
    2. Are you provisioned by your carrier for MMS?
    3. if you are have you gone into settings to make sure that MMS is turned on.

  • I have an iPhone 4s iOs 5.1.1, I want to update it to iOs 7, if I've backed up to iCloud will my contacts, pictures and text messages be saved and able to be restored if lost?

    I have an iPhone 4s iOs 5.1.1,( I know I need an update!) I want to update it to iOs 7, if I've backed up to iCloud will my contacts, pictures and text messages be saved and able to be restored if lost? I recently backed up to the iCloud as recently as this morning at 2AM.

    OCD with good reason
    With a second backup, as you now have, you are well protected.  The update makes a backup to use for restoring after the install but with another you should be in great shape.
    Just take you time and be patient, these can take a while to complete depending on server load, connection speed, etc.

  • I want to add a photo as an attachment and NOT have it pictured in the body of the email.

    I want to add a photo as an attachment and NOT have it pictured in the body of the email.
    When I click on the paper clip to attach, it always is pictured in the email.

    https://discussions.apple.com/message/16802006#16802006

Maybe you are looking for