Picture is shakimg when I burn a DVD using iDVD 8

Can someone help me? Every movie I create looks good when played using iDVD preview but... when it is burnt it shakes!!
Help
Is there a special setting?
PT

Pawel Tauter
Did you use iMovie or FCP to edit the video? if it's the latter, there is no field dominance tab in FCP however you change it thru your sequence, ctrl+ click your sequence in the browser and then choose settings.
Change your field dominance there.... like this:
if on the other hand you used FCExpress and not FCP, then add the following video effect filter:
Effects -> Video Filter -> Video -> Shift fields

Similar Messages

I am currently experiencing problems burning a DVD using iDVD. I have created a project in iMovie. I have shared it to media successfully however when I try to burn it I receive a messaging advising there is insufficient disk space on assets.

I have created a iMovie and wish to burn it to a DVD.
I successfully shared media to browser in preparation to burn to DVD using iDVD magic.
I am able to successfully preview however when I try to burn I receive a error indicating "Not enough disk space on assets"
I am currently using a Macbook Air
Version 10.6.8
Model Name:          MacBook Air
Model Identifier:          MacBookAir3,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.4 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA31.0061.B01
SMC Version (system):          1.67f10
Serial Number (system):          C02DRL8JDDQX
Hardware UUID:          53310599-83EA-5F58-99A9-AE505506BBFE
Capacity 60.32 GB
Available - 2.49 GB
The iMovie I am trying to burn is 45 mins long
Any suggestions would be greatly appreciated...

Reduce your burn speed to 1/2 the Rating of the Media.
Disc Burner
If more than one supported disc burner is connected to your computer, choose one from the menu.
Preferred Speed
When you burn a CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Disc Format
Choose the type of disc you want to burn: Audio CD; MP3 CD; or Data CD or DVD.
Gap Between Songs
Choose the amount of silence, if any, between songs.
Use Sound Check
To have all songs on the disc play at the same volume, select this option.
Include CD Text
To include information that CD players in some vehicles can display, select this option.

My MOV videos do not play when I burn a DVD using iPhoto.

My MOV movies do not play when I burn a DVD using iPhoto. I can use the other method with my Mac to burn DVDs but the videos are not good quality like they are in my iPhoto albums. How can I get better quality in the DVD videos if I am unable to burn a DVD using iPhoto? I upgraded to the free Mavericks.

Hi
Most common origin to this are:
Brand of DVD used - NoName, Memorex etc cheap brands might work as Data-DVDs - BUT NOT as Video-DVDs
Type of DVD used - I only use SL-DVD-R as they also playback on older DVD-players. DVD+R for newer DVD-players. Never ever DVD+/-RW. Dual-Layers usually creates more problems than Single-Layers
BURN SPEED - Very IMPORTANT factor - I never go faster than x4 - Normally I use x2
Material used - Video Codec, Photo and Audio file formats
Video-Codec: StreamingDV, AIC and HDV (I use)
Photo: .jpg - NO .bmp or other - all converted to .jpg first
Audio: .aiff 16-bit 48kHz or 44.1kHz (as on Audio-CDs) - NO .mp3, wma etc ailient formats - all converted to ..aiff 16-bit 48kHz or 44.1kHz first
Free Space: on Start-Up (Macintosh HD) Hard Disk - I never go less than 25Gb when doing Video-DVDs (for SD-Quality Video - if HD material is used 4-5 times more are a safe low level) (Other external Hard Disks - DO NOT COUNT as space here can not be addressed by Mac OS or iDVD for it’s massive use of .temp files)
Dusty DVD-burner Laser: I use a Cleaning DVD (no liquid but the one with brushes) from time to time.
Harmed DVD-burner Laser: Easy to do by burning more than three DVDs at a time - I let it rest for 30 minutes till next batch of three DVDs. If this happened - then only a costly repair will help. It will not heal by it self.
OBS: There are more than one Laser in the DVD-Burner so other functions might work OK as Playback CD/DVDs and even burn CDs. Still being broken.
Yours Bengt W

Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
You may get a better responce in the iDVD forum.
https://discussions.apple.com/community/ilife/idvd
regards

I made a imovie out of a group of photos and added music. When I burned to DVD on iDVD and played back the disc all of the photos were larger than the frame could accommodate and the sides were cut off. I also tried resizing from 16 9 to 4 3 and no better

I made and iMovie out of a group of photos and added music. When I burned to I DVD the pictures came out to wide to fit into the frame. I tried again by changing the size from 16 9 to 4 3 and it didn't make any difference. Would going to share to browser rather than directly to share to IDVD make a difference?

What do the photos look like if you play the movie within iMovie? Sounds like adjusting Ken Burns would help.

2Can't burn a DVD using IDVD nor Disk Utility first time user-what is wrong

T he recording device reported the media error: Power calibration area error. (0x73, 0x03.)
IDVD Version 6.0.3
Emac- OS 10.3.9--- in the owner's manual it DOES state my emac can burn DVDs. Is this correct?
I am using FujiFilm DVD-R . Never used the DVD apps or burner before. I PRAM'ed 3 times. Also did 6 CD audio burns to check the drive. Is it the media-- Fuji does not work? I used Office Depot generic for audio CD-Rs.
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
I made a WONDERFUl slideshow-- of only 17 slides-- confirmed I have plenty of room on hard drive and et al on the "disk information". I have attempted since May 7th to get this DVD to burn my slideshow. PLEASE HELP ME!!! I have deadlines-- now it is for Tuesday May 15th. Please alert me to an alternative until I can get my Emac working properly on what I can do to make copies of my slideshow ASAP. Thank you.
Now I looked thru your ERROR message archives and found NONE to match mine. What do these error messages mean-- is my Emac not working? This is first time ever I tried to use IDVD and IMovie and Disk Utility--- so the first impression is VERY VERY VERY bad for Apple's "easy to use for first time customers"....
Oh to add information-- I DO have an external DVD recorder-- have yet to even see how to hook it up to my Emac-- if this is an alternative to meet my Tuesday deadline-- PLEASE let me know-- how do I burn a copy of my slideshow into an external DVD recorder?
My emac model: 1.25 GHz Power PC G4
Memory 256 MB DDR SDRAM
Machine Model: eMac
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.25 GHz
L2 Cache (per CPU): 512 KB
Memory: 256 MB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.2f1
Serial Number: G84181KDQQJ

Also did 6 CD audio burns to check the drive. Is it the media-- Fuji does not work?
Your drive is actually TWO devices - one set of optics and laser burns/reads CDs, another set of optics/laser reads/wtites DVDs. The fact that your drive can burn CDs doesn't mean it is working for DVDs.
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
You might want to get back to Applecare and expalin again the error messages you are seeing. They really don't involve iDVD.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
You either have a media problem or you have a DVD burner problem.
F Shippey

Can't burn a DVD using IDVD nor Disk Utility- first time user-what is wrong

The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
May 13, 2007 8:05pm PDT
IDVD Version 6.0.3
Emac- OS 10.3.9--- in the owner's manual it DOES state my emac can burn DVDs. Is this correct?
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
I made a WONDERFUl slideshow-- of only 17 slides-- confirmed I have plenty of room on hard drive and et al on the "disk information". I have attempted since May 7th to get this DVD to burn my slideshow. PLEASE HELP ME!!! I have deadlines-- now it is for Tuesday May 15th. Please alert me to an alternative until I can get my Emac working properly on what I can do to make copies of my slideshow ASAP. Thank you.
Now I looked thru your ERROR message archives and found NONE to match mine. What do these error messages mean-- is my Emac not working? This is first time ever I tried to use IDVD and IMovie and Disk Utility--- so the first impression is VERY VERY VERY bad for Apple's "easy to use for first time customers"....

Well I had to make the copies for my presentation-- so the cheapest I could find in my area was Walgreens-- 39.99 for ONE COPY of a DVD! So I paid $70.00 and the clerk made 4 copies for me;-) So thanks Walgreens!
Now-- my Mac-- I could not find anything on shelves at Walgreens or Office Depot but the FujiFilm I already have... So I now have time to look elsewhere.
I did PRAM my Emac 3 times-- I tried these things also:
1)Saved the IDVD- .dmg format to QuickTime .mov
I uploaded to google video.com or whatever-- they use their own software-- .gvp file and player. All was successful (even now on YouTube-
2) I then made another version in PowerPoint and saved it as an MPEG
Also for below-- I lowered the burn rate upon the 2nd try to 1x-- took one hour or more (I went to get a root canal... then exfoliate... then I came back;-)
Also tried different .mov from the web-- a great whale shark video that was only 49mb. My presentation is 120 mb. So I was just thinking-- make it smaller; burn slower.
3)I did try to burn from IDVD, Disk Utility and then the drag and burn/click method on the desktop-- put a blank DVD in-- drag the .mov icon to the blank DVD -- write a title for the blank DVD- formats it / Drag to trash-- Burn icon comes up/ Clicked it-- waited 20 minutes and received:
"Error: Error occurred while burning the disc. This disc can not be used."
So I put in another blank Fuji DVD-- just in case. Same error message-- so I am hoping it is the DVD itself and not the SuperDrive.
4)Also-- I tried to do audio CD burn-- just to make sure about the drive-- all was successful and I did a back up of my Itunes files-- 6 CDs they burned (they meaning "the Gods of Mac OS" ;-0 My audio CDs are Office Depot CD-R 52X700mb/ So the generic is better for CDs on my Emac that I know;-)
So I will use my weekend to try other DVDs-- and I have the safety net of Apple Care-- but then just realized-- my Extended Care plan is OVER at May 30, 2007!!! I called to ask to EXTEND it further-- I'll pay whatever-- NOPE-- 3 years was max on this contract. So any repairs I have to pay for after May 30th-- ISN'T THAT JUST THE WAY THE WORLD GOES? The DAY after your warranty on AnYTHING-- the thing goes kablooey?
But I still have days left--- and I know of a good Mac Repair person in area-- but it is just so darn difficult to move my desktop Emac (I got the GLASS monitor to save $300 or something) Weight Lifting is what it is-- weighs about 45lbs or more.
But it seems it may be the media I am using if the CD burner is working, right?
I can update-- if you want me to email direct-- just give me a note (my email is listed). Thanks all!!! I just want to impress everyone of how tenacious I am to find that my Emac is FINE-- it is just ME that is warped;-)

After burning to dvd, using idvd, movie stops on frame but audio continues

After creating imovie which works perfectly, and also after trasferring to idvd works perfectly, i have problems when playing back dvd after burning to disc. The movie stops but the audio continues. I altered the clip but same thing happened in next clip after next burn. I don't think its a corrupt clip, but maybe something to do with WHEN it occurs in the movie. Any suggestions? After 4 goes and many hours burning I am stumped!

Hi Tomma1
And welcome to apple discussions. It's good you chose to use 16 bit audio for all of your source material. And assuming this is accurate info .... From what I can tell, you are doing nearly everything correctly. However let me ask you a few questions.
1. Are you using the boot volume (the hard drive where iDvd and Leopard are actually located) to encode your dvd (yes/no)?
2. More importantly, does the disc image also go out of sync when played thru apple's dvd player app? or does it only happen on the burned dvd-r?
3. Are you using Verbatim Dvd-R or an alternate brand? if it's the latter, then for troubleshooting purposes while on this forum; please use Verbatim Dvd-R. (it helps us eliminate additional / possible variables). Thereafter feel free to use the media that works best for you and your mac.
4. Have you tried an alternate encoding setting other than pro quality setting? and do you get the same results?

SonyAVCHD video looks great in iMovie11 or iDVD7.1.2. When I burn a DVD it's terrible. If I freeze frame I see squares. The picture has poor contrast. I've viewed DVD on my 6-year-old, 24 in. intel 2.16 GHz iMac, and on TV. Help!

I just bought a very good quality Sony AVCHD camcorder. I also just upgraded my computer from Tiger to Snow Leapord. My iMac is a 6-year-old, 2.16GHz Intel 2 Duo, with a 24 inch screen and 3GB Ram.
My Sony camcorder HD video looks great in iMovie11 and in iDVD7.1.2., but when I burn a DVD "professional" it looks terrible. If I look at a freeze frame on the DVD I see image made-up of squares. The picture has poor contrast. It looks as bad as poor quality VHS. Do I need to get a new iMac to make this work? Is it possible to make a sharp, clear DVD from AVCHD footage with a 6-year-old iMac like mine?

That thread helped for a time. But now it seems as though my computer is back to slow again. But, some of the jargon is over my head as well. Not sure I knew quoite everything they were talking about. But thanks a lot for that, it helped I probably just need to reread it and follow the instructions again. Thanks so much.

When I burn a dvd I get wave on items that have lines in the pictures

When I burn a dvd in imovie any stills I have that have lines on things like a shirt start to wave.

that's because the Ken Burns effect (zoom in/out) will play havoc on some colors, stripes, or other designs. You can minimize it by minimizing the effect, but unless you were to invest in professional software, I don't believe you can get rid of it altogether. It can even happen on TV - a reporter wears something that will not show well especially if he moves around and you will get some strange effects.

Sound problems with film made in iMovie when burned to DVD in iDVD

PLEASE HELP!!!
I have upgraded to iLife 09 and for all the bad that people have to say, I actually like it a lot. Anyway, it gave me the encouragement I needed to play with some old home movies I had stored with the aim of producing DVDs to give to my friends, and hopefully showing off the slick production values I have come up with.
So after spending a week getting to grips with iMovie and editing an old holiday film with all the cuts, transitions, chapter markers and music etc that I wanted, I ended up with an hour long movie that I was happy with.
Then to iDVD. After trying out all sorts of ways to go from iMovie to iDVD to ensure the best quality, I have finally given up trying to replicate the on screen quality of the movie in iMovie with the finished DVD, and just opted for the easy to use 'share to iDVD' option. The quality is not great, but then the footage is old anyway so not too much of an issue.
Then I spend another few days playing with and learning iDVD and again end up with a finished product that I am happy with, with nice looking menu's and a slideshow etc.
So I come to burn the final DVD, for which I pick the 'Professional burn' option which takes 4 hours but I am happy to wait if it means the best quality possible, and my DVD is done.
I then play the DVD to discover my problem - the sound in the movie is not right. To explain further, in my movie I have reduced the sound of some of the film clips to nothing and placed music over the top. When played and previewed in iMovie it works fine - the music plays and the sound that is attached the the video does not. When previewed in iDVD it works fine - just as I had edited it in iMovie. But then when I burn the DVD, some of these sounds are present again which completely wastes all my hard work at the editing stage.
I have searched and searched for help on this but am unable to find any.
Sorry for the very long description and story behind my issue, but it is massively frustrating. Basically, at some point during the 'burn to DVD' stage in iDVD it decides to completely ignore most of the sound edits I have made on the movie in iMovie.
If anyone can help it would be much appreciated.
Many thanks in advance.

Many thanks. Looking at that thread it looks like there are a few others having the same issue as me. Might be to do with not using the predetermined rates for clip slowdown and inputting my own.
The frustrating thing is that I have only done this once right at the start of my hour long movie and if I change it now it with though the timing of my whole film out.
Not much else I can do though I suppose.

Hello, I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD. This coruption does not always appear when you preview the project. I have slowed down the burn rate to 1X and kept the quality to professional.

I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD. I have changed burn rate from best to 1X with no difference in the coruption. I have the quality set to professional with no improvement. The size of the project is near 3.95, so it should fit on a single layer burn. Should I use either iMovie to create the slide show or "Photo to Movie"? Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show? If I do use iMovie or Photo to Movie, the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB? What DVD's are recommended? Any preferred brand? Are there problems with burning with double layer? I read on this blog of numerous problems.

DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition". See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use. Using larger images won't give you better quality, andf in some cases, will lower you image quality because the Quicktime resizing that occurs isn't the best.

Getting extra scenes when burning from imovie to dvd using idvd.

I edited a movie using imovie and got it n the sequence I want. Then I burned it to dvd using idvd. However, when I view the dvd, it starts midway through the video, goes to the end, then starts over and shows me the whole video.
The problem is, I don't see the extra part that shows in the beginnning on the dvd on imovie. How do I get rid of that extra stuff if I can't see it on imovie?

I have had the same problem. I spent an hour on the phone with Apple Support and they were absolutely no help at all. They told me to buy Final Cut Pro. The only thing I found that helped was to export the movie using Quick Time as HD as possible (which takes a long time) and then use that in iDVD, so that the version I have for viewing on a TV or whatever doesn't look cheap and lo-res. My old iMac and iMovie 4 was slow, but the quality was much better on finished DVD products of movies or slideshows. It *****.

I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down command+optoion+p+r and still nothing???
Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

Unless your iMac is still covered by AppleCare, get an external DVD burner.
You can get perfectly good ones from Amazon for less than $40.

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

Picture is shakimg when I burn a DVD using iDVD 8

Similar Messages

Maybe you are looking for