Picture Linking problems on Mac OSX 10.5.8

I am having troubles placing images on my site. When i place it, it acts like the link is messed up and won't show the picture, though the link is fine. It works when I place a photo on my site using Windows 7, but not on my Mac. what could be wrong

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

Similar Messages

Unsatisfied link error in mac osx 10.2.3

Hi,
unsatisfied link error in mac osx 10.2.3
can you solve the problem why the error is occuring when i am trying to set port for printer .after seting port in the application then the swiping takes place. as the application is running but unable to communicate to wireless printer through bluetooth. as everything is fine (files like cu.dev and tty.dev are created in mac and i selected that file and saved it.swiping is not done through wireless ). the error i got is
ERROR LOADING linuxSerialParallel:java.lang.unsatisfiedLinkError: no linux serialparallel in java library.path
java.lang.unsatisfiedlinkerror:is session active
please respond immediately regarding this issue
thanking you,
babu

Your problem is definitely not related to 'Community Feedback and Suggestions'. And I cannot see any relationship to Oracle (at least according to the given informations).
Werner

I can't download linked files on mac osx lion what do i do?

i can't download linked files on mac osx lion what do i do?

There have been some reported problems with Apple's servers.
Try this.
Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
I assume you are trying to update via wifi. You can also connect the iPad to your computer and update using iTunes.
 Cheers, Tom

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Linksys Connect CD/Downloadable Software compatibility problem with Mac OSX 10.4.11

I purchased a Linksys E1200 and I am running Mac OSX 10.4.11. As I have a G4 eMac, I cannot run a higher operating software. The CD that came with the E1200 will not launch the Linksys Connect software, as it is not compatible with Mac OSX 10.4.11. When I download Linksys Connect software from the support section of the Linksys site (version 1 or 2), same problem. I have read that I can use the E1200 with Mac OSX 10.4.11, but how? Getting very frustrated and would appreciate any practical advice/help. Thanks!
Solved!
Go to Solution.

Hi bassist71,
You may actually do the setup manually. It's done by accessing the setup page of the route through 192.168.1.1 and configuring the settings according to your Internet connection type. If you have a Cable connection, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r... If you have a DSL connection, check this out, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9017a6f6bece444dbb4a0746eb87682a_2210.xml&pid=80&r...

HP1536dnf Scan problem with Mac OSX 10.7.5

I have just installed the HP online download driver for my Mac computer (running Mac OSX 10.7) and the subject HP 1536dnf MFP; when attempting to operate the HP1536dnf Scan function from my MacBookPro; I get the following message:
192.168.0.6 is currently unavailable. Ensure your device is powered on, check the connection, and ensure your network is functioning properly. If these conditions are correct, restart the device and try scanning again. I have check the router and Mac configurations without resolving the problem.
My MacBook Pro is connected to a Motorola Wireless Cable Modem & Gigabit Router (model SGB6680) via wireless link and the HP1536dnf is connect via the Motorola Router Lan connection (192.168.0.6) .
NOTE: I am able to print to the HP1536dnf from the Mac, however I am not able to operate the Scan function wirhout getting the above stated message. This leads me to understand the Mac link to the router and the Lan to the HP1536dnf is operating correctly.
Please suggest items to check or a Fix for my problem. Thanks!
This question was solved.
View Solution.

Hello Ray1536dnf,
Thanks for the post. WIth this one, scanning being a more complex process than printing we may have some other issue here. I might suggest taking a look at the below document specifically solution three, assigning a static IP. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02790693&lc=en&product=3974279&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Wifi have a problem on Mac OSX 10.9

Hi!
My Mac is a 2012 model and I am having a problem to ask is due to hardware or software errors. I'm using Mac OSX 10.9.1 and sometimes the wifi connection is lost completely. Turn Off I have wifi on my computer and turn it on its new wifi working again. Can you tell me what that error is due to hardware or OSX 10.9 or not and how to overcome? But when i run my computer on windows by bootcamp driver newest it not problem!
Thanks

Hi Imad
This may not be a Mavericks issue. We've had a small number of Mac users (including me) hit a lock up with 12.1.2 similar to what you've described on Mountain Lion and we've not been able to reproduce it consistently yet.
Can I get you to do me 4 things please?:
Launch JDeveloper from <jdev_home>/jdeveloper/jdev/jdev (this will open a terminal window to run JDev from)
a) Repeat the cause of the issue. Once JDev has locked up, without closing it down, in the terminal window that is running JDev type "Ctrl \". This will produce a full thread dump. Copy the complete contents to a file.
b) Via your Apple menu -> About this Mac -> More Info -> System Report option, select Print, then print/save the output to a PDF file. This will give us a complete dump of your machine's configuration.
*Please note that this will likely reveal information about you as an individual. It's my intention to place that output in the internal bug tracking this issue so the developers can check your Mac's configuration. If you're not comfortable with that, we can instead get you to lodge an SR with Oracle Support who have the requisite privacy policies in place. Your call*
c) Email both files to me at chris DOT muir AT oracle DOT com, or alternatively place them on DropBox or similar and just send me links.
d) Update this thread to say you've posted the content, which if it gets blocked by a firewall I'll know to chase this up.
Finally there is a work around which isn't ideal, simply don't open the pages in Design/Preview mode. Via Preferences -> File Types you can change the default behaviour when opening a file so it shows source code instead.
Thanks & regards,
Chris Muir
ADF Product Management

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

Problem reinstalling Mac OSX 10.5

I am having a problem with reinstalling Mac OSX 10.5 after putting in the disc to do it everything was fine it asks what language I want and then it tells me that it can not be installed on this computer. I am trying to install it on a MacBook bought last year it is an intel machine and I have always kept up on the system updates. I don't want to take it in to a store more because I am stationed in Japan and getting it to a store requires more work than it is worth. If there is any advice on what to do I would greatly appreciate it.

You need the original grey system discs for each Mac model you own, not just to be able to reinstall the OS but also to reinstall the model's bundled retail application software (like iLife, if included) & to run the very model-specific Apple Hardware Test it contains if that is ever required.
The retail Leopard discs do not include either of these capabilities, so unless you are desperate to get Leopard reinstalled on the MacBook, you should try hard to find the original MacBook system discs. Failing that, you can contact AppleCare & request a replacement disc set. Generally speaking, Apple will ship one to you for a nominal replacement cost if you can show that you own that model by providing its serial number or other proof of purchase information.
Regarding installing Vista or Windows XP, both the retail Leopard & system discs include Boot Camp, which includes a convenient utility to format the hard disk for dual booting. While complicated, this can be done without that utility but you still need the hardware drivers the disc contains to get the full use of the Mac's hardware when running Windows. I have no idea if say an iMac's system discs have the Windows hardware drivers that also support a MacBook or if this too is model-specific, so on that you are on your own.

New Smart Album problems PSE9 Mac OSX

I am running PSE9 on a Macbook Pro and an Imac, both using Mac OSX. Creating a new Smart Album on the Macbook works perfectly but on the Imac it is unworkable. When I try to create a new Smart Album I just get a spinning ball and everything stops. I have uninstalled PSE9 and the Organizer and also removed all traces of them in the Library. Installing them again and making sure that I import only a dozen images into Organizer makes things slightly better. This time the spinning ball only lasted for a minute and then I could create a Smart Album. I then tried to create another Smart Album and had the spinning ball for a couple of minutes. Creating the third Smart Album was worse still. There is no problem with normal albums.
Has anybody got a way round this. I have about 9000 images, going back to 2001, and I want to put them into yearly albums so Smart Albums are a very useful tool.
A similar query by another member some time ago received no feedback.
Thanks for any help.

Thanks for your suggestions. I have uninstalled pse9 and Organizer once again and removed all traces in "hard drive>library>application support>adobe". I have also removed the elements and organizer preferences and anything else I could see in my username/library. After doing all this I reinstalled PSE9 and Organizer and then searched for and installed the updates needed. I imported 12 images (jpg) into Organizer and then tried to create three smart albums. In each case I got the spinning ball for about 40 seconds before I could enter the smart album name.
I have just tried to add a fourth smart album and the spinning ball has remained for ten minutes - presumably it has crashed.
Help!

Install problem on Mac osx 10.6.8

Hello ... I would like to install the update at Mavericks, I own a Mac Pro 2008già upgraded to Snow Leopard, I made regular access to the Apple store and downloaded the free upgrade to 'Mavericks', when I click on the installer execute the instructions, but so far as to choose which disk to install it I do not enable the main disk 'Macintosh HD:
how can I solve this problem? ... how can I enable the primary disk to install Mac osx Mavericks? ... thanks for the reply

I apologize but I have found that the properties mentioned by you are correct, I attach images of the characteristics...
LIST OF HD INSTALLED
HARD DISK INFORMATION
same thing for the GUID partition map
the only thing I do not understand is the presence of this disk off:
thanks for the reply

Illustrator CS5 Instalation Problem on Mac OSX 10.5.8

I have tried instaling this software multiple times and am getting errors in the program that reinstalling doesn't seem to fix.
Here are the errors I'm getting:
When opening a new document, I get the error: "Can't locate the Startup Profiles. Please try after installing Illustrator again. Illustrator will now attempt to create a default document"
When quitting Illustrator, I get the error: "The Application Adobe Illustrator CS5 quit unexpectedly after it was relaunched. Mac OSX and other applications are not affected. Click relaunch to launch the application again. Click Report to see more details or to send a report to Apple"
I saved the report in case this is needed.
After browsing user forums, I attempted to reinstall using the following steps:
1) Before attempting any reinstallation, I deleted the folder drive/users/username/library/Preferences/Adobe Illustrator CS5 Settings/
2) Unstalled Illustrator using the uninstaller package that comes with Illustrator.
3) Removed shortcut from menu
4) Reinstalled Software.
Please advise.
Thanks,
Mike Bryant
Laboratory for Atmospheric and Space Physics

After downloading CS5 I ran into multiple permissions errors, this is no exception.
The following folder needs Read & Write access:
Macintosh HD:Users:(Your User Name):Library:Application Support:Adobe:Adobe Illustrator CS5
You can change this access by selecting "Get Info" on this folder, then adjust the Sharing & Permissions options so everyone can Read & Write.
NOTE: This addresses the startup profiles only; crashing on quit is a separate issue.
When you open up Illustrator this time and try to create a new document, Adobe magically creates a "en_US" folder within the Adobe Illustrator CS5 folder that couldn't be added before.
Mac OSX 10.5.8

Problem with Mac OSX version of Microsoft RDP Client 8.0.10 (Build 25189) connecting to Linux host running XRDP

Hi,
I have an issue when using the Microsoft RDP client on Mac OSX 10.X when connecting to a Linux host running the XRDP service(XRDP host is authenticating to an AD DC).
Exactly the same connection parameters work when connecting to the XRDP host from a Windows server using the local Microsoft RDP Client and the same authentication credentials, so I am confused as to what might be creating the issue.
I have also checked that I am able to connect from my Mac to the remote linux box that is running the XRDP service, by using another App on OSX called CoRD. This also connects without issue.
Are there any differences in the way the Mac version of Microsoft RDP authenticates compared to its Windows counterpart?
Any advise appreciated. Happy to provide any logs.

Hi,
As this case has been quiet for a while.I need to close the case and will mark it as Answer. If you still have any issue,I suggest you ask in a new thread.
Thanks for your Support & understanding!
Regards.
Dharmesh Solanki
TechNet Community Support

I install mac lion but not complite if i want install again i have message there was a problem installing mac osx

i install mac lion but not complite if i want install again i have message there was a problem installing mac osx

i install mac lion but not complite if i want install again i have message there was a problem installing mac osx

Problem installing Mac OSX 10.5 on new HDDc

Hello, I needed to replace my HDD and I'm trying to install Leopard on my new blank HDD. I have the install disk that came with my macbook, but it's not working. I insert the install disc and restart the macbook holding down the C key. It starts from the CD. So I choose the language and it gives me message "Mac OS X cannot be installed on this computer. This software annot be installed on this computer" with two options OK, that does nothing, and Restart. My old HDD was the original one, that came with the mac and is broken. The new one is a Samsung SATA 320gb model HM320II/SRA. Reading about the problem in the Apple Support website I found something about updating the firmware, but I'm not sure if it applies to me.
Thanks so much for the help!
Message was edited by: Lucivaldo

Welcome to Apple Discussions!
Your 10.5 must look like * unless it was prebundled with your Mac, when you bought it from an Authorized Apple Dealer. You can't use a 10.5 disc that came with another Mac.
Also your machine must be older than the 10.5 disc if it has the image pictured above.
Once you make sure you have the correct disc, be sure to format your new hard disk GUID with the Utilities menu -> Disk Utility -> Partition -> Options button in the installer program. The default format won't allow installation of Mac operating systems.
- * Links to my pages may give me compensation.

Picture Linking problems on Mac OSX 10.5.8

Similar Messages

Maybe you are looking for