Picture not comging in

Ok i just got leopard
and i installed it and everything was fine - but i tried to do a video chat with the backgrounds and all of that and also on photo booth * this was with my built in isight camera on my MacBook*
and when i do it comes up and if i "move into the picture " the background like startes to disslove and fizzle like and it erases the background and i can see the " real life backround where i am "
and why is that ?

Hi,
If you watched the MacWorld Demo you will have seen that the guy was standing and the background was pale and of uniform colour. In Contrast he wore a relatively bright top.
There was also no hint of direct overhead lighting.
You will need to match this.
An Apple store is likely to have movement behind you that will change what the "Background" actually is and it will have store type spot lights which will alter the lighting as you move due to the overhead nature of it.
You need to match their set up as closely as possible.
Moving out of shot to reveal a black chair and wearing black or dark clothes is going to cause the sort of problem you describe.
Multiply that but other things in the pic.
Close overhead lighting also changes when you move back into the pic and can alter the effect.
7:58 PM Monday; November 5, 2007

Similar Messages

.gif Picture not appearing in design panel

I have a .gif picture not appearing in design panel but it
appears in the browser preview.
<div id="footerPanvalid">
<image src="images/valid-xhtml10-blue.gif" alt="Valid
XHTML 1.0 Strict" height="31" width="88" />
</div>
#footerPanvalid {
position: relative;
right: 200px;
padding-left: 300px;
z-index: 23;
valid-xhtml10-blue.gif also appears in the assets panel
Any ideas whats going on?

Put a border around #footerPanvalid to make sure that you can
see it in
Design view.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"nikos_golf" <[email protected]> wrote in
message
news:fclmk4$39d$[email protected]..
>I have a .gif picture not appearing in design panel but
it appears in the
> browser preview.
>
> <div id="footerPanvalid">
> <image src="images/valid-xhtml10-blue.gif" alt="Valid
XHTML 1.0
> Strict" height="31" width="88" />
> </div>
>
> #footerPanvalid {
> position: relative;
> right: 200px;
> padding-left: 300px;
> z-index: 23;
> }
>
> valid-xhtml10-blue.gif also appears in the assets panel
>
> Any ideas whats going on?
>

Pictures not showing up, when uploaded?

Hey I have a website www.anchorstudios.ca. Anyways I have been using it for quite awhile for our business. Lately we have had problems with certain pages in our websites. For whatever reason instead of a picture there would be a question mark there. Anyways when I go back into Iweb it looks normal. I try uploading again, and it is still not there. I have tried switching pictures, which either made that picture not show up, or it made different pictures not work. Sometimes there are also problems with the buttons. I also tried deleting the whole page and making a different one? Anybody who has had problems and any success getting rid of this please let me know. Here is the page we have the most problems with:
http://web.mac.com/parksyboy/Anchor_Studios/Danielle2.html
Darryl

Darryl ~ If you haven't already done so recently, in iWeb choose +File > Publish All to .Mac+ and then, in a browser, view those pages which previously had photos missing.
If that didn't help, it may be a system problem...
Quit iWeb and in +Applications > Utilities >+ double-click on +Disk Utility+. In the column on the left, click on +Macintosh HD+. Click on the +First Aid+ tab then on +Repair Disk Permissions+. When that has finished just note whether or not many permissions were reported & repaired. Now restart iWeb and choose +File > Publish All to .Mac+. Then, in a browser, view those pages which previously had photos missing.
If that didn't help, quit iWeb and in +Library > Preferences+ look for a file called either:
com.apple.iWeb.preferences.plist
or:
com.apple.iWeb.plist
Drag that file to the Trash. Restart iWeb (it will automatically create a "clean" plist file) and choose +File > Publish All to .Mac+. Then, in a browser, view those pages which previously had photos missing.

Pictures not showing in photo app after syncing.

I synced my N8 with windows media player after the anna update but couldn't see any pictures in the photo app. Pictures are already on the device inside "pictures" (not "images") folder in E: drive. After playing a bit, i figured out that photos app only read the pictures inside "images" folder of E: drive. Is there any possible way to make photo app read files in the "pictures" folder or make Windows Media Player sync with the "images" folder instead of "pictures" folder. Any help would be great. Thanks.

I guess you just have to move them every time from Pictures folder to Images you sync with windows media and I prefer to start using Ovi Suite to sync
to move a file you should mark it first then click Options - Organize - Move to - choose whatever folder you want
If I've helped in any way, a click upon the star over on the left would always be appreciated.
If however my answer also solves your problem clicking below it will benefit other users!

Pictures not appearing - sometimes

I am using the x5 version with Word 2003 SP3 and I have been
having issues with some of my pictures not appearing when I
compile. In this project I make a .hlp file and I don't remember if
I have had this issue with the few .chm projects I have. If I use
the Active Test button, my picture appears, but when I make the
final hlp file I end up with the {bmc filename.bmp} link appearing
instead of the picture.
I have played around with inserting another graphic and
moving lines around and there is something really strange in there.
If I insert another graphic, the new one shows up as the {bmc} and
the old one actually shows the picture. If I remove the new
picture, I go back to showing the {bmc} for the old one again.
In other cases I had to move the picture to a particular line
and if there were any blank lines around it I would get the {bmc}
again. I only work on help projects a few times as year, so I do
not remember exactly what I did to get the picture to appear the
last time this happened. I just remember getting it to appear by
putting the picture right next to a certain paragraph and I left it
that way - even though it wasn't the best looking page that way.
Has anyone had anything similar to this happen before? It is
really hard to figure out what is going on and finding and fixing
the missing pictures is a big project. Any ideas would be greatly
appreciated!

I too had a similar problem with my winhelp 2000 project. The
images were not getting displayed in the output.
I was told by Mr. Peter Grainge that the images should be
only inserted through the robohelp's New Help Image tool button. It
solved the problem.
As I was adding another word document to the project, I ended
up creating two separate folders for the images from both
documents. Now, when I generated the output the images again went
missing. So, I took a chance by cutting and pasting all the images
in a single folder and presto !! It works. The images are getting
displayed.
Just check whether the folder where ur images are stored lays
in BMROOT. If not, then you have to insert them again.
Enjoy!!

I have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

User Profile Pictures not deleting / replacing

Hello,
I have been struggling with this issue for a couple of weeks and think I may need some help. I have a user profile sync application which works fine, it syncs several attributes from AD into SharePoint, it also exports user profile pictures back to
AD for Exchange and Lync to use, this all works fine.
I was asked to replace a picture for a user, which I did using the 'Manage User Profiles' page in Central Admin. I didn't realise there was an issue until I was asked again a week later, it seems the update had not worked. I tried again, and
lo and behold the picture managed to revert back to the old one again.
After a lot of messing around deleting the picture, syncing, adding the new picture, syncing again etc I could not get the new picture to stay, the old one kept coming back. I do not think the issue is related to the sync, but more with SharePoint itself,
here is a symptom I believe is related:-
I delete a user's picture from 'Manage User Profiles', the picture is gone and the user's mysite page shows the placeholder pic.
Looking in the mysites site collection in User%20Photos/Forms/AllItems.aspx the 3 pictures for the user have disappeared. However if I browse to the url of the picture - User%20Photos/Profile%20Pictures/*username*_SThumb.jpg (or mthumb or lthumb) the
picture appears in my browser.
Next if I add a new picture for the same user through central admin, I then see the new picture in their mysite, I can also see 3 thumbnails of the user's photo under the mysites site collection in User%20Photos/Forms/AllItems.aspx
So far so good, however, if I browse to the url of the picture (including the filename as above) then I am shown the old picture :S
So it appears that the pictures in User%20Photos/Profile%20Pictures/_w and User%20Photos/Profile%20Pictures/_t are updating with the new picture, but the pictures in User%20Photos/Profile%20Pictures/ do not get updated, or even deleted properly when they
are removed.
Hope somebody can shed some light on this as it's really annoying me now! Thanks :)

Hi,
According to your post, my understanding is that the replacing picture not work properly in MySite.
I tried to reproduce the issue in my environment(SharePoint server 2013+SP1), it works without any issue.
Did the issue occur for all the users?
To narrow down whether the issue is related to the User Profile service, you can use other accounts to check whether it works.
If that is the case, you can recreate the user profile service application to check whether it works.
If your environment does not install any updates, you can install SP1 or latest update to check whether it works.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Transferring pictures not on camera roll to Macbook Pro-HELP!

Hello everyone,
A year ago or so my harddrive on my Macbook Pro unmounted and I lost everything. Well before that happened I had uploaded thousands of pictures to my Ipad 2 and so those are pictures not on the camera roll but in I guess a different kind of 'gallery'. Also, I am not very computer savy so I apologize if this answer is simple. But my problem is that I want to be able to take all of the pictures off of my Ipad 2 and get them back onto the Macbook but when I hook the sync cable up and Iphoto opens it only gives me the option to sync the camera roll gallery. Any help would be greatly appreciated. Thank you everyone!
Donovan

You cannot import synced photos back to the Mac. Only camera roll photos will import. There are third part WiFi transfer apps that will allow you to transfer photos from any album on the iPad back to the Mac. There are a number of these apps in the App Store. I use this one.
Wireless Transfer App Easily send photos to iPhone/iPad/Android ...

Pictures not printing?

I downloaded a knitting package with 50 pages. It has several pics on each page. The document prints but the pics won't come in. Any ideas. I have tried to reach the publisher to no avail.

Don’t know for sure, but they finally printed. Whatever you did I thank you for it. I printed them several days ago and I didn’t know how theh showed up in my documents. When I pulled the document up and the pictures were there, I just printed them and was thrilled. Merry Christmas and a Happy New Year to you and again, thank you - let me know what I can do to pay for this repair. I haven’t seen a invoice, this is the first notice I received and just saw it today. Today is 12/9.
Re: Pictures not printing?
created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
Hi,
I am moving your posting at PDF Pack forum to Acrobat forum.
Hisami
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5915556#5915556
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5915556#5915556
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5915556#5915556. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Why are my pictures not sending in imessage?

Why are my pictures not sending in iMessage?

Check out this support document http://support.apple.com/kb/ht4221

Face time show contact picture not video

Face time is showing contact picture not video can someone help me

Your phone is up to date, you have a Verizon iPhone. Read through this support document:
http://support.apple.com/kb/HT4319

Pictures not displaying right

I recently downloaded the program, as I wanted to try it out since I have an older version. When opening up pictures it comes up with multiple lines all over the picture, not allowing me to see it clearly. Anyone know how to fix this?

Alaskangirl81 wrote:
haha....I got it figured out actually before anyone responded. Thanks though! Now if I could just figure out why the text I am typing is not showing up on the pictures!
Don't forget the video drivers too!
Regarding the text, make sure it is not the same colour as the background. If that's not the cause, reset the Type tool from the drop-down menu in the top-right of the Character Panel.
The non-appearance of the text may be due to one or more of a number of reasons and this should fix most of them. Does a text layer appear correctly in the Layers panel?

IOS 8 - pictures not uploading in safari for facebook and other websites?

IOS 8 - pictures not uploading in safari for facebook and other websites? I just upgraded to IOS 8 on my iPad 3 retina display and when I try to upload pictures in safari for facebook, the picture upload just stalls and never completes. This happens in other sites as well. How can I fix this? Is anyone also experiencing this issue???

Hi Hindhaughlee, <br />Thanks for the post.
This may not be the best place to post such a solution but maybe some users will find it. If it turns out to be a major problem with a simple solution maybe we will manage to document it somewhere.
Are you able to provide more details please:
* exactly what software and software versions is the problem with ? <br /> You appear to be a Windows 8 user, but presumably the Kaspersky software may be applicable to other Windows versions, which Kaspersky software is this tested with ?
* What is he exact error message or warning that Kaspersky generates in this situation ?
* is the problem documented elsewhere, preferably in a public open site, if so maybe you could provide a link
* can you detail simple but exact detailed Steps To Reproduce that will enable others to test out this problem and solution.
Cheers
John <br /> <sub>One of the forum moderators J99<sub>
P.S. <br />
Anyone with this problem finding that the solution works may wish to vote for this thread and solution. Or if someone else can produce links to examples of this or you are able to give precise Steps To Reproduce please add a post of your own.

HT1551 Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

Do you have to have a certain Hdmi cable for sky go to stream picture not just sound?

hdmi is a std which always stream both picture and audio
but when you say sky then connecting the atv to a middle box hdmi switch is a hit or miss if it can be don
really comes down to the switch in this case the sky one

Item pictures not appear does not appear when I sync

Item pictures not appear does not appear when I sync

after looking at a few other posts, i tried the uncheck the sync box, did a sync, rechecked the box, and synced again. the music is now downloading into my phone. if anyone else has this problem try this first.

Picture not comging in

Similar Messages

Maybe you are looking for