Picture not fully shown (partly transparancy)

Hello,
first, sorry my English is really bad.
So, my hobby is to make pictures into Render.
I donwloaded Photoshop CS 6 and wanted to try it. I opened a picture to render but, as you could read in the title, the pictur is partly transparancy. Actually it isn't (that fact you can also see under Layer).
What did I wrong? Are few options wrong?
When I duplicate the layer, thaen the layer above is completely transparent ...
I hope you can help me ._.
Greets, Zhirelia

Have you installed all the Photoshop updates?
What OS version are you running?
Have you updated your video card drivers from the GPU makers' website? (because what you're showing is a driver bug)

Similar Messages

Printernames not fully shown?

Hi,
I've got a bit of a tricky problem and hope that you can help me:
One of our customers has several shared printers, the names are identical except the addition of (black) and (color) at the end.
Now, when I open up Adobe Reader and want to choose the desired printer, the names are not fully shown (below):
As you can see, that's not very convenient - is there any solution other than renaming the printers? (a horizontal scrollbar, like there is one in other products maybe?) Thanks in Advance for any help!

Hi CowboyinAZ,
thanks for the reply! The popup/balloontipp would be a pleasant enough solution - unfortunately, I don't get said balloontipp when I hover my mousepointer over the printername :-( At least not in WinXP, that is.

Value not fully shown on report

I'm trying to show a field with key and name. the field is in free characteristics.
when I right click on it and select filter value, i see values like "P150/12/345" . but when I select the field in rows, i only see "12/345". The company code (P150) is not shown.
What could be the possible reasons
thanks in advance
Fran

See that is the way a compounded char works. The P150/12/345 value that you see is actually made up of 3 InfoObjects with values : P150, 12 and 345. Now if you are "fixing" the P150 value in the query, then the system has no need to unnecessarily display that value all along the data cells. If you remove the filter, you will see the complete display.
Hope this helps...

Personas not fully shown

i downloaded firefox 8 and persona on top isn't fully visible, i also want more options on my toolbar and when i try to add items on toolbar lay out and press done it disappears, if to hard to solve how do i go back and reset previous toolbar, pleez?

Hi CowboyinAZ,
thanks for the reply! The popup/balloontipp would be a pleasant enough solution - unfortunately, I don't get said balloontipp when I hover my mousepointer over the printername :-( At least not in WinXP, that is.

SSRS Report is not fully shown in browser

Hi All,
I have made a report using SSRS (Visual Studio 2013).
But when I deploy it on report server and then view it in browser using URL for e.g. http://myserver/reports then
the report is cut off from right side, that means it only shows half of the report. When I export that report to Word then it also displays fine.
Please let me know how to fix this one.
Thanks and Regards,
SK2811

Hi SK2811,
Based on your description, you are experiencing the issue when you viewing the report in Browser on Report Server, The report with some display issue that you can just see left half of the page, but when you export to Word it will display fine, right?
In your scenario, the issue could be related to the Browser settings or the compatibility between Report Manager and Browser. First, please check the version of the SQL Server Reporting Service and then check the type and version of your Browser. Not all
browsers support all report functionality.
Planning for Reporting Services and Power View Browser Support (SSRS 2012) (This article describes the support and requirements for Report Manager management features, viewing reports, the Report Viewer controls in Visual Studio)
If it is IE Browser you can have a quick test by changing the browser version before view the report to see if the same issue will reproduce:
Launch the IE , and press F12
Click Emulation icon on the left of the bottom and in the User agent string dropdown list select an supported version.
If the supported version works fine, try to reset IE to that version. Please also check the result in IE Compatibility View mode.
If still doesn’t help, you can reference to below similar thread and do the setting:
SSRS 2008 - Vista Security - Header Only
If you still have any question, please feel free to ask.
Thanks
Vicky Liu

Smartform column - data not fully shown

Hi experts,
In smartform table, i have data around 1000Characters to be displayed in one column, but it was displaying upto 250 something.
I checked on the variable in text, it is declared with String. I debugged also variable string contains 1000 characters but it displays only less charcters in column ( final output).
Pl help
Regards
Kishore.

hii kishore,
                1. i hope your entering it from header text.
                2.Create a text element
                 3.Keep the text element under loop.
                4.specify it_tab into wa_tab under table tab in Loop.
                5.specify &wa_itab-text& in the text element.
Regards,
Sridhar.V

Employee picture not shown in ESS

Can someone please help us? We use HR 46C. It is not possible anymore from a certain patch level to use a file store in archivelink, therefore we have configured an HTTP content Server. This works fine, we can upload pictures without any problem. When we test it in transaction PA30 on our SAP system it works fine. We see an photo for every employee for which we uploaded an picture.
However when we use the ITS server to run transaction PZ01 (or PA30) we won't see a picture. After some investigation I found the HTML part of the service file where picture should be shown. This is in the HTML template of PZ01 'SAPMPZ01_500_CORE'. In here the following code is shown:
`if (SHOW_PIC == "1")`
<td width="140" valign=top>
    ``
    <table width=140 border=0 bordercolor=black align=right>
    <tr>
      <td valitn=top align=right><IMG width="140" SRC="`wgateURL(~OKCode="DISPLAY")`" alt="`#Foto`"></td>
    </tr>
    </table>
</td>
`end`
This code will only be executed when teh variable 'SHOW_PIC' has the value '1'. I already took the ocde outside of the if command. Then it shows an border where the picture should be shown however the URL is incorrect so it only shows an red x.
Is there anyone who knows if we forget to configure something so that the picture will be shown? Where will the variable SHOW_PIC be filled for example???
We would be VERY thankful if someone could help us!
Kind Regards,
Nico van der Linden

Hi Sudhir,
thanks for you reaction (and I am sorry for the late response. The problem is solved. It appeared to be a stupid authorization problem.
Kind regards,
Nico van der Linden

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?

http://support.apple.com/kb/HT4236

User Profile Pictures not deleting / replacing

Hello,
I have been struggling with this issue for a couple of weeks and think I may need some help. I have a user profile sync application which works fine, it syncs several attributes from AD into SharePoint, it also exports user profile pictures back to
AD for Exchange and Lync to use, this all works fine.
I was asked to replace a picture for a user, which I did using the 'Manage User Profiles' page in Central Admin. I didn't realise there was an issue until I was asked again a week later, it seems the update had not worked. I tried again, and
lo and behold the picture managed to revert back to the old one again.
After a lot of messing around deleting the picture, syncing, adding the new picture, syncing again etc I could not get the new picture to stay, the old one kept coming back. I do not think the issue is related to the sync, but more with SharePoint itself,
here is a symptom I believe is related:-
I delete a user's picture from 'Manage User Profiles', the picture is gone and the user's mysite page shows the placeholder pic.
Looking in the mysites site collection in User%20Photos/Forms/AllItems.aspx the 3 pictures for the user have disappeared. However if I browse to the url of the picture - User%20Photos/Profile%20Pictures/*username*_SThumb.jpg (or mthumb or lthumb) the
picture appears in my browser.
Next if I add a new picture for the same user through central admin, I then see the new picture in their mysite, I can also see 3 thumbnails of the user's photo under the mysites site collection in User%20Photos/Forms/AllItems.aspx
So far so good, however, if I browse to the url of the picture (including the filename as above) then I am shown the old picture :S
So it appears that the pictures in User%20Photos/Profile%20Pictures/_w and User%20Photos/Profile%20Pictures/_t are updating with the new picture, but the pictures in User%20Photos/Profile%20Pictures/ do not get updated, or even deleted properly when they
are removed.
Hope somebody can shed some light on this as it's really annoying me now! Thanks :)

Hi,
According to your post, my understanding is that the replacing picture not work properly in MySite.
I tried to reproduce the issue in my environment(SharePoint server 2013+SP1), it works without any issue.
Did the issue occur for all the users?
To narrow down whether the issue is related to the User Profile service, you can use other accounts to check whether it works.
If that is the case, you can recreate the user profile service application to check whether it works.
If your environment does not install any updates, you can install SP1 or latest update to check whether it works.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error in LSMW for new matl-You have not fully maintained the descriptions

Hi Experts,
I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name RMDATIND.
Can you please help me.
Thanks and Regards,
Amol Kale

Amol,
as description is mandatory field while creating material, you need to assign description text.
also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
hope it will help you.
Thanks
Ritesh

Image in photoshop is not fully seen

image in photoshop is not fully seen, and is positioned towards the lower part of my screen making it impossible to work properly on the image and impossible to crop as i am not seeing the whole image. This only a recent problem that has developed

jujust to say its OS X version 10.8.5

Eliminate White Space in Picture Library Slideshow Web Part

On my site, I am using picture library slideshow web parts on two different pages, and one of them is giving me trouble with unwanted white space between the photos and the back, pause, forward control buttons (see photo below).
In an attempt to resolve this issue, I have tried numerous things. I have resized the width and height of the web part itself to many different sizes, but to not avail. I have cropped and resized all of the photos to be the exact same size of 300x200
pixels. I have used CSS to display the photos to their actual size rather than the standard preview size. With all of this in mind, my second photo library web part on another page works perfectly. This was white space problem was only an issue until
I resized/cropped the photos in that case. For this page, however, that solution is not working.
Does anyone have any clue as to how I can remove this unwanted white space?
Thank you!

Hi Stacey,
From your description, you would like to remove white space in picture library slideshow web parts. You used CSS to solve it however a web part still show white spaces.
Please press F12 and see if there is div tag in white space, if there is, try remove it.
http://365.webbrewers.com/Pages/webbrewerstest.aspx
In addition, try edit web part properties > Display with > choose No Title or Description.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/1e63661f-0183-44e7-843a-cca58a20cddc/remove-empty-space-in-picture-library-slideshow-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

Transferring pictures not on camera roll to Macbook Pro-HELP!

Hello everyone,
A year ago or so my harddrive on my Macbook Pro unmounted and I lost everything. Well before that happened I had uploaded thousands of pictures to my Ipad 2 and so those are pictures not on the camera roll but in I guess a different kind of 'gallery'. Also, I am not very computer savy so I apologize if this answer is simple. But my problem is that I want to be able to take all of the pictures off of my Ipad 2 and get them back onto the Macbook but when I hook the sync cable up and Iphoto opens it only gives me the option to sync the camera roll gallery. Any help would be greatly appreciated. Thank you everyone!
Donovan

You cannot import synced photos back to the Mac. Only camera roll photos will import. There are third part WiFi transfer apps that will allow you to transfer photos from any album on the iPad back to the Mac. There are a number of these apps in the App Store. I use this one.
Wireless Transfer App Easily send photos to iPhone/iPad/Android ...

HTML5 Courses still not fully compatible on iPad or iPhone

Hi,
I've created several courses in Captivate 7, and using the HTML5 tracker, I've made sure all the elements in the courses are HTML5 supported. After publishing the courses and putting them in the LMS, I've tried using them on my iPhone and iPad, and I keep getting a warning message (all the courses work fine on my Mac). The message says:
"This course is not fully compatible with your current device. You may encounter problems with some lessons."
I can open the courses fine, and can navigate through them, but I'm not sure what parts are not compatible. I found one video that's not working, and it seems that the quiz questions aren't working. Otherwise, they seem to be functioning fine.
Any ideas or insight would be appreciated!

Can you tell me what the "ini" file is? The warning seems legitimate because the quiz questions aren't working on the iPad or the iPhone. So it seems like more than an automatic error message.

Picture not fully shown (partly transparancy)

Similar Messages

Maybe you are looking for