Picture on the final product is shaking

Every time i burn a dvd in idvd with a transtition the picture looks like it is "shaking"

Some transitions have interlace-related flicker or distortion in iMovie HD 5.0.2
The Overlap transition doesn't deinterlace the freeze frame like it should. If the freeze frame remains interlaced, then there is flicker or jitter when it is viewed on an interlaced TV.
Also the Scale Down transition doesn't deinterlace the scaled clip so it has ugly interlacing artifacts (if it is interlaced and if it contains motion).
It can be debated whether the Twirl and Warp Out transitions should also deinterlace the transition clip so there would be no interlacing artifacts. It is a matter of taste whether distortion in interlacing is part of those transition effects or not.
http://www.sjoki.uta.fi/~shmhav/iMovieHDbugs.html#transitions

Similar Messages

Is there a way to develop the same raw file multiple times, each time keeping the final product?

I've been working with my NEF raw files. When I import one into LR I can start developing it right away, which I've done. I also know that the modifications aren't made to the raw file but kept in an XMP file. Since the I'm not actually changing the raw file do you know if there is a way to make a secondary edit of the file?
Here's an example. Let's say I have a raw file and I want to develop it in color. Then when I'm all done I want to start over and develop it again and black and white but keep the color one as well.
I know I can undo all the edits I've made but then I lose all that work too.
Is there a way to develop an image twice and keep both final products? I know copying the raw file and renaming it is one crude way but I have to believe there's a better, easier way.

Yes, you can make a virtual copy at any time.
If you want the virtual copy to be un-edited after you have done some editing to the "non-virtual copy", you could open the "non-virtual copy" in the Develop Module, click on Reset, create the virtual copy, then undo the Reset operation (click on the last real edit in the History Panel)

How do I eliminate the shake on the final product?

The original video and the edited one in the work space are fine, but the final burned product has a shake to it. How do I alleviate the issue?

Jason777
What you just wrote
The source was originally a MiniDV tape captured on 3CCD, converted to .dv, which is what I put into the timeline.
Does not appear to match up with what you just wrote in post numbered 4. So, let us recap....
Anywhere along the line did you ever have DVD-VIDEO on a DVD disc. According to what you wrote, you should have since you wrote
"I ripped it from the DVD and that is what I put into the timeline. It is all standard definition" Does your "DVD" = DVD-VIDEO on DVD disc?
If that is what you did, you did not put dv (dv video compression) on the Timeline. What went on the Timeline was MPEG2.vob video file from
the DVD-VIDEO structure. Your file's name was probably VTS_01_1.VOB.
Although some may push you in the direction of converting the video files VOBs to mpeg, there is no need to do that.
You insert your DVD disc into the burner tray, open Premiere Elements 12 with the appropriate project preset, and use Add Media/DVD Camera or Computer Drive/Video Importer. So, is that what you did in Premiere Elements 12 which produced the DVD-VIDEO on DVD that you have shake problems?
All these details have implications in the troubleshooting.
Premiere Elements DVD-VIDEO on DVD disc includes a specification for Field Order = Lower (Bottom) Field First. Some software puts out DVD-VIDEO on DVD disc to include Field Order = Top (Upper) Field First. So, depending on the details, reversing the Field Order might be one solution to what you are seeing.
Please review the above and then let us see if we can get together on the details. If there is anything that I have written that you do not understand, please do not hesitate to let me know. I will rewrite it in another way to get my thoughts across.
We look forward to your follow up.
Thank you.
ATR
Add On...Important...when you are in the Premiere Elements 12 Publish+Share/Disc/DVD disc burn dialog, what does it show for Space Required and Bitrate (with a check mark next to "Fit Contents to Available Space") just before you hit the Burn button?
If you do not have a check mark next to "Fit Contents to Available Space", where is the Quality Slider positioned just before you hit the Burn button?

Why do I get a loss of quality video when placing titels or grading in FCE. Even after rendering and saving to the final product? The video starts to get shaky

Whenever I place a title in my video in FCE, the part where I placed it losses its quality. Its getting shaky and blurred.
Even afther rendering and saving it to the final end product. The same problem occurs when I'm collor grading. I use the internal tools for titels and grading of FCE.

and some more specs;
My systsem >>
IMac 3.06 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
clips and master on Imac
Scratchdisk on external disk with firewire 0.8
On both disks I have more tehn 0,5 TB geheugen left
Videocamera HF 100
Imported clips >>
- FXP 17 Mbps
For RT I use >>
- RT Unlimited
- Playback Video Quality high
- Playback framerate high
Videoclip =
- videorate 25 fps
- framesize 1920 x 1080
- compressor apple intermediate codec
- pixel aspect square

FAQ: Will there be updates to the Photoshop CS6 beta before the final product ships?

We do not plan any additional beta releases for Photoshop CS6 before it is announced and ships.

Please see FAQ post regarding beta duration
Thanks,
Pattie
http://forums.adobe.com/message/4209419#4209419

BLURRY FINAL PRODUCT!!

Very VERY FRUSTRATED. Just spent hours and hours putting together a slide show using Premiere Elements 12 - and the final product (after rendering) turned out VERY BLURRY! I don't understand how this happened. All the pictures and slides added were crystal clear until rendering. And watching the final DVD was a total disappointment. I am not happy that we spent all this money on a program that is not simple to use. The free program I used to use worked better than this. Please help me fix this slideshow.

jenn
Thanks for the reply. I will post information in whatever format you feel that you best understand so that we can get you the Premiere Elements end product that you seek. From what you have written, you want your slideshow in DVD-VIDEO format on a DVD disc. That is the format that will play back on the TV DVD player. Whether that DVD-VIDEO is standard 4:3 or DVD-VIDEO standard widescreen 16:9 will depend on how you set up the Premiere Elements project that produced it.
This all leads us back to what project settings you used to produce the DVD-VIDEO on DVD disc and how you did or did not match up the properties of the source media with the project preset (also known as the project settings). This is not complicated, but it does require details consideration so that you get a decent end product.
Also, in your end product is it your source videos or photos that are showing as blurry or is it both? Does anything display non blurry?
You have said that your source video media are coming from
GoPro camera
iPhone
Nikon Digital Camera
Kodak (underwater)
Each may be giving you source video in different formats (sizing et al). A Premiere Elements project has only one project preset. So if you are importing different formats into that one Timeline, you need to set priorities. Pick you prime source, set the project preset for that, and then fit all the rest as best you can after you import them.
Is it possible for you to round up the brand/model/settings for each of the above sources for your video in this project? There are all sorts of pitfalls to avoid so that you are not left with burn to failures, blurry images, black borders, etc. iPhone video may present with a variable frame rate and not let you import it or give you out of sync audio. Photos grossly oversized for the project can cause failures and crashes. The above is my overview of the situation.
The answers will be in the details. And, there are many that cannot be overlooked especially when you come with "Blurray End Product" as your thread title.
Please think about the above. Please try to give us the details of the source media going into the project that will produce your DVD. Then we will help you put all that information together (step by step) for a Premiere Elements project to produced the DVD-VIDEO on DVD disc.
Thanks.
ATR

Control of serial numbers in productions (parts and final product serials)

Hi,
We are starting using our production module in SBO 9.0 PL11 and it is all quite messy.
We need to manufacture an item that has a serial number made of parts, some of which have serial numbers. Just imagine a car. The car will have its own serial number, but the engine, the radio and so on will have their own serial numbers. But the cables, tyres, etc do not have a serial of their own.
We set a BOM model, made of every part (with or without serial) and set every line to manual.
Then we place a PO for our parts, and then do a Goods Receipt and enter the individual items' serials.
Then, we issue a Production order for our final product made of all of our parts in the BOM. Then we release it for production.
Next, it all gets messi. If we create a receipt from production, we can issue the serial number of each of our final products.
If we create an Issue for Production, we can choose what serials to pick for production.
Big problem is that we loose all traceability. There is no way (or we can't find it) to know what are the serials of the parts that created the final product.
Not only this, issue for production looks (serial number transaction report-wise) looks like a goods issue, so just a way to decrease your parts stock. And receipt of production looks like a goods receipt. So you just now you received something for production or that you issued it to production, but there doesn't seem to be a link between them. No traceability at all.
Can anyone throw some light into this? I am sure we are doing something really wrong, but can't see what.

Hi,
1. But how do we control what serial numbers for each part we used to create the final product specific serial? (I use engine #003 and radio #376) to create product with serial #076. And we always produce in quantities greater than 1.
Please provide an sample process production with FG item and components with required serial format to check
2. This query is not returning any rows. I am inputing a final product code, with production orders, and nothing shows up.
As mentioned, the above query works for batch managed items. Once we conclude process, I can try modify above query to meet your purpose.
3. It sounds really complicated to have to open both receipt and issue to track a single manufacturing operation.
You can use relationship map option to view both issue and receipt for single production.
4. Besides that, what is the exact workflow? I don't quite understand issue and receipt, should I run both independently?
Standard work flow for production order:
1. Create bill of material
2. Create planned production order based on above BOM
3. Make sure required components are arrived.
4. Change planned to released status.
5. Issue components to production by issue production
6. Receive finished item from production through receipt from production.
Thanks & Regards,
Nagarajan

Premiere Workflow Final Product Quality Question - General

Clarification: This is just a general workflow question regardless of hardware/software/cpu/gpu. I'm also not asking about rendering times - just how the final product looks.
Do any one of the following 3 workflow methods have any bearing on the "quality" or "look/feel" of the final output of a project.
Specific effects are named in my examples just for the heck of it - the root of my question is if any given workflow with any given effects applied affects the quality of the final export/render.
#1) Raw Clip => Apply Sharpness => Apply Levels => Apply Three-Way CC => Export final product.
#2) Raw Clip => Apply Sharpness => Export Clip => Import Clip => Apply Levels => Export Clip => Import Clip => Apply Three-Way CC => Export final product.
#3) Raw Clip (sequence 1) => Apply Sharpness => Create sequence 2 and drag sequence 1 onto it => Apply Levels to sequence 2 => Create sequence 3 and drag sequence 2 onto it => apply Three-Way CC to sequence 3 => Export sequence 3 as final product.

Jim's answer is probably based on the fact that no matter what you do to a video, exporting it will degrade the quality almost every time. But that is not only acceptable, but absolutely necessary. What video would you have that did not require some adjustments, even if just a straight cut.
In any case, I think the answer you really want is:
#1 looks normal. So that's fine.
#2 will degrade the image every time you export unless you export to a completely lossless codec like Lagarith - which creates HUGE files and is totally unnecessary. It is just a bad workflow.
#3 is technically the same as #1. It's fine. No problem. In fact, it can be quite handy sometimes to work that way. Nesting does not cause the problems that exporting does.

Burning an HD final product

I am editing a project using footage taped in HD from a Canon HV10 digital video camera. I burned a DVD to look at the final product, and it is very distorted. I have never used HD stuff before and I am not sure what's going on. Any suggestions?

You need to set the track in DVD SP to be a 16:9 track so it will letterbox on 4:3 screens and allow for full screen on a 16:9 TV set...
Jerry

Unhappy with final product - bringing my questions/issues to one thread

I have been trying to get what I consider an acceptable DVD from my new Mac. I have started a couple of threads and posted in a couple of others, but I figured it was better to bring all my questions/problems to one thread. I'm going to try to give all the information that I can think of, in hopes that yall can help me.
I have iMovie11, iDVD7.1, Toast 8 Titanium, and Final Cut Express4.0.1.
At this time, the video I'm working with came from a Flip Ultra HD (the 30fps version, not the newer one that does HD at 60fps).
I have edited an 18 minute project, and created numerous versions of it, which I then burned to DVD with Toast. The final product on each disk all look pretty much the same to me, with the one problem that is making me go nuts --- the video playback does not appear "smooth". It looks like it is playing back at less than 30 frames per second.
I don't expect perfect video quality from the Flip camera - actually the video is acceptably clean and sharp (for me) - it's the frame rate thing that is killing me. In the past I have burned numerous DVDs from MiniDV through Sony Vegas that play back perfectly.
As of tonight, I have discovered that I apparently chose the wrong "easy setup" for FCE, it was on DV-NTSC, and I think I have found that it should have been on HDV-Apple Intermediate Codec 720p30 - although I might be wrong about that as well.
I did not do any kind of conversion to the Flip videos before working with them in FCE - don't know if this would be part of my problem.
In my trying various setting for the export, I have found "Key Frames Every xxx" with a default at 24 - don't know what this is or if it is related to my problem.
I don't mind re-editing the entire project if there is something I can do that will make this better, or if this is as good as it is going to get with this source video.
Also - I've noticed that anytime I add or make any changes to a transition, I have to re-render that section. Is this normal, or is it because I'm using video straight from the Flip (without MPEG Streamclip'ing) it first, or some other reason - maybe related to my wrong easy setup choice?
Please let me know if there is other information I can provide that might help you help me. I can see that I will love working with Final Cut Express and playing with all that it can do once I figure out how to set the export settings like they should be.

All the source video is converted, new project started with correct easy setup, corrected clips imported - the video looks awesome in FCE preview.
I notice that it still requires a re-render where titles are added from Live Type - is that normal or did I have something wrong with the items coming from Live Type?
I also exported a short video 2 different ways:
export - quick time movie - self contained.... This one has a very subtle jump just before and after each transition that I don't see in FCE while editing, it's only in the completed version
and....
export - using qt conversion
format - quicktime movie
options - compression h.264
quality - high
key frame rate - 24
frame reordering - yes
encoding mode - multi-pass
dimensions - compressor native 1280x720
This one does not have the jump before and after transitions, but from what I read earlier in this thread, I should be able to just use the "export - qt movie - self contained" - correct?
Message was edited by: bhamjeff

FCPX final product has been exported but it is choppy and seems like its missing frames

The Problem: FCP X .mov finished product is choppy in its play back (i checked through different programs, itunes, vlc, windows media player, QT, Also different computer platforms and operating systems. same choppy playback) so its a problem on FCPX's rendering etc.
What I know: The input file is a ripped DVD I own thats been handbraked to mp4. Its a clean rip and convert, I can play it through any media player on any platform/OS and its very smooth just like the DVD.
                       My project settings are for SD DVD video. They are NTSC SD, 720x480 DV Anamorphic and 23.98p fps settings. During the editing process
                       I have not touched the video so all those setting are default or should be anyways.
                       The only things i can think of now out of the ordinary are:
                       1. The settings of DV Anamorphic, should it just be 720x480 DV or 720x480 in the settings for resolution- I don't know what DV or anamorphic                            means.
                       2. The mp4 file input (the harry potter dvd rip) is resolution 720x360. Does that factor in?
                       3. This is FCP X the trial version. I dont know if that changes anything.
Background Info: I'm taking the harry potter DVD and matching it with the audio from Brad Neely's soundtracks. The timing is perfect, the sound is ok. Now I was hoping the finished product would be good to go, but its not.
Any idea of why the FCP X output file is choppy (like its missing a few frames here and there and skips from frame to frame so its not smooth) when watching the final product?
system specs:
                       Mac OS X (10.7.4)
                       2.5 GHz Intel Core i5
                       4GB 1333 MHz DDR3
Any help is greatly appreciated. Thanks.

i also forgot to add that in some places there is a green screen for a brief second.

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides

I am using Lightroom on my MAC where I import the finalized JPEG-pictures into iPhoto to create a slideshow (for instance in combination with films). When exporting the slideshow with a 1080p resolution to iTunes I experience difficulties (missing slides and black transitions). When using JPEG-pictures directly from the camera there are no problems, so the manipulation in Lightroom seem to cause corrupt files. Does anyone recognize tje problem and could it have anything to do with the introduction of the Yosemite software? Is Lightroom already Yosemite-proof?

In iPhoto 11 the Originals folder is renamed Masters.
IPhoto menu -> Provide iPhoto Feedback and report the bug.
Regards
TD

Well I am in my first year in college and am finally looking to get a macbook that I have always wanted. But I dont know what one to get. Ill be using it for school work, music and pictures, searching the web and traveling abroad.

I have a lot of pictures and i know I am going to be getting an external hardrive. But i am stuck between the 13 in new macbook air and the 15 in retina macbook. battery life is important but i want it to be really fast and just like a powerhorse. I could use all the input I could get. I will be studying abraod to and i want something that will be good to use over there and still be fast. Thanks guys all imput needed!

Goodness me, a month? That's crazy! I'd say wait it
out and get your free adapter or battery (though I'm
bitter I just barely missed the free nano promotion
too).
I am expressing interest in getting that free battery, but I really don't need an extra adapter because I still have the original one from my first MacBook.
Had you mailed your MacBook in for just the random
shutdown issue? It seems bizarre that it has taken so
long, because I sent mine in for the same issue and
it took two weeks total turn around. Also, did they
give you any reason as to why it will take so long to
ship out your replacement?
My MacBook was initially sent in just for the random shutdown issue, but then I called them while it was getting repaired to request the new plastic, since that was becoming a public issue. I think the logic board was replaced by two weeks into the repair, but then it had to wait longer for plastic. When all of that was replaced, it failed the final testing and was going to take longer, but they offered a replacement.
I think my replacement is taking so long because it is a custom build (so that took about 3 business days) and then estimated shipping is always one week, so since yesterday it has been waiting to be shipped.
ARGH.

I am still having issues with the TOC. I finally got several chapters and sections to show different pictures in the TOC, but have spent hours trying to figure out how to repeat it. This should be so simple. Is there an update? Please help us Apple.

I am still having issues with the TOC pictures. I got several chapter/section photos to show up, but can't seem to repeat this success. It is some mystery that happened during a time that I had practically given up. This should be such a simple thing. Drag and place a picture into the placeholder and it shows up in the TOC....right? Help, help help! want to get this thing done and it's taken two days of work just get some of the photos to show up. I am going to have to publish this ibook with no photos in several sections.....why can't this be simple? I have even had someone else spend hours trying to figure this out. This software is such a GREAT idea....come on...help with this little part of it.

I had the same problem myself. I got to the point where I couldn't replace the photo, of a new chapter, in the TOC. What I did was to duplicate an existing chapter that was working and was able to replace it's TOC's photo. I also found that if you try different areas of the photo you can sometimes get it to replace correctly. For example, instead of dragging the new photo to the middle of an existing photo, try dragging it to the right top corner.

Changing to power-saving results in losing picture on the screeen

Hi,
Product name: HP Pavilion dv6-6093ex Entertainment Notebook PC support.
Product number: LM610EA#A2N
When changing to power-saving GPU, then Radeon got disabled and no picture on the screeen is shown.
I really had been facing a problem with my Windows 7 Home premium 64Bit, then I have only done a repair install, which
didn't delete all the drivers and programs. However, before doing the repair install, I was recommended to uninstall AMD
Readon and Intel(R) Management Engine Interface.(AS shown below). Thus, I have uninstalled the AMD Readon, and Intel(R)Management Engine Interface.
Upgrading Windows will affect the following devices and/or programs:
These devices might not work properly after the upgrade. Before upgrading, we recommend updating the drivers for these
devices. Cancel the upgrade, open Control Panel and search for "update device drivers", or go to the device manufacturer's
website to search for updated drivers.
System devices: Intel(R) Management Engine Interface
These programs might not work properly after the upgrade. We recommend uninstalling these programs before upgrading. Cancel the upgrade, open Control Panel, and search for "uninstall a program". (Note: Programs marked as * can be safely reinstalled after the upgrade.)
ATI Catalyst Control Center *
When the repair install got completed, then I found that Grphics adapter is still functining well since there are no ! mark in front of the adapters: Intel(R) HD Graphics Family and Radeon(TM) HD 6770M in the device manager.
Once I changed the GUP from High-performance GPU to Power-saving GPU, then I lost the pircuter on the Screen.
When I lost the picuter on the screen while on Windows in normal mode, I booted to the safe mode, then opened the device manager, and I saw that Radeon(TM) HD 6770M was disabled
To get picture again, I enabled Radeon(TM) HD 6770M (screen shot below) while in Safe mode:
When restarting my PC and started Windows in the noraml mode, the picture returned on the screeen.
Whenever changing to power-saving GPU, then the same problem happens.
Will I need to reinstall the AMD High-Definition Graphics Driver, although there are no ! mark in front of the Intel(R) HD Graphics Family and Radeon(TM) HD 6770M in the device manager?

Thank you so much indeed,
Could you please take some of your precious time out to really answer these questions below of mine?
Firstly:: I really have run this Utility(amdcleanuputility) to remove all components of the prvious installation of AMD Radeon and Mobile Inte Graphics.
I was propmted that tool will do as it is shown below in the screen shot.
I agreed. Then, it completed. Is 'AMD cleanup utility' recommended by you?
Then, the graphics adapters in the device manager became as follows:
Secondly: I think that it is now the point to reinstall AMD High-Definition Graphics Driver_Software Packaging Numbr(SP55092)_Driver Version 8.882.2.3000.
Thirdly: Moreover, I would be saying that I lost the audio on my System once the (amdcleanuputility) has completed, although its icon is still intact(screen shot below)
Must I need to reinstall IDT High-Definition (HD) Audio Driver_Sp55094_Version6.10.6345.0????
Finally:: in your link about downloading the drivers for my product name. I found Driver-Graphics (5) . However, all what I need is the finall one which is an already-downloaded file with me. Could you please let me know what about the other four graphics drivers????????

Picture on the final product is shaking

Similar Messages

Maybe you are looking for