Picture Optimizati​on Doesn't Work !!??

Hi
I have the latest version of desktop manager installed.
I was trying to put photos from an SLR camera on my bb curve 8520.
However the photos are resolution 3872 x 2592 (about 4.5 Mb on average).
This makes viewing them (loading time) really long and annoying not to mention that bb messenger will not allow me to zoom out to view the entire photo for my profile pic.
I select the photos under sync and click optimize, then click sync but the photos remain at this high resolution.
Why ???
Please Help.
Thanks

I don't know
You can try looking in:
%localappdata%\Research In Motion\BlackBerry Desktop\Logs\Desktop.log
Try  your picture sync, then look in that file near the end  you can see some logging messages that look like:
'13:45:14.425|INFO |30|Rim.Desktop.Media|39002|Copied: .... '
Maybe see if any obvious errors are being printed there?

Similar Messages

  • Cropping pictures with Viewer doesn't work.

    Cropping pictures with Viewer doesn't work.
    Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
    Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

    I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
    Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
    I would try:
    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    if that doesn't help, then I'd reinstall Mavericks over your current installation.

  • I can't save pic. from net. "set your download location place as "Pictures"" That button doesn't work, or button for "browse" to send a file.

    With my new browser i can't save pictures from net. I saw a question about changing file location. I can't, coz that button doesn't work. Also if i want to send a file, using mail or something, browser button for searching file doesn't work. Thanks.

    I am using Firefox for several years and never had any problem. Since i update it to the new Firefox, problems start:
    If i am trying to save a picture from ALL internet, it is not working. I am doing in the same way, like always: view image/save image as.... When i click it is not working, and all my screen doing like i make a refresh. I saw something strange files in temp after i am trying to save a picture, files with name like "etilqs" and some other letters after, the files are hidden. When i close firefox, files disappear.
    If i am trying to send an e-mail with some files, button for search files in my pc, is not working, and when i click him, same thing with my screen. It is not about what kind of mail i am using, same problem if i want to attache a file on a site, even if i try to change files location in browser setup, like : options/general/save files to/... and i hit "browse..." button, same problem like i want to attache a file. Even here, if i want to use "ADD IMAGES" option, under is browse button, it is not working, same problem with my screen. Like is angry or something.

  • IPhone 5 - Insert picture from email doesn't work, but sending in Photos via email does?

    I have an issue with a user here at my office.  When composing an email and they insert a picture from their phone, it sends the email, but the picture is not attached.
    However, if we go to Photos and send the photo via email, it works fine.
    He had been able to send fine up until yesterday afternoon and then it stopped working, so I believe he's done something, but I have no idea what.  Took a look at his settings and everything seems normal.  Also, rebooted his phone, but the same issue occurs.  And as far as I know, he's the only one having this issue.
    We are running email via Lotus Traveler/Domino, but I've tested my iPhone and everything sends fine, so I don't believe this is a server issue.
    Does anyone have any idea of what to try here?
    PS - user is using ios7.1 (same as mine)

    I have an issue with a user here at my office.  When composing an email and they insert a picture from their phone, it sends the email, but the picture is not attached.
    However, if we go to Photos and send the photo via email, it works fine.
    He had been able to send fine up until yesterday afternoon and then it stopped working, so I believe he's done something, but I have no idea what.  Took a look at his settings and everything seems normal.  Also, rebooted his phone, but the same issue occurs.  And as far as I know, he's the only one having this issue.
    We are running email via Lotus Traveler/Domino, but I've tested my iPhone and everything sends fine, so I don't believe this is a server issue.
    Does anyone have any idea of what to try here?
    PS - user is using ios7.1 (same as mine)

  • Sending picture on bbm doesn't work

    Hey guys
    Since I upgraded bbm to the latest version and I can't send pictures to my bbm contact
    When I send a picture it show me this message ”Picture has been sent to... "
    But when ask my friend if the picture had arrived or not he reply with no
    I have 20 contacts in bbm and they say the same thing
    Is there any solution ?

    I have the same iusse .. I think BlackBerry team work to resolve this problem
    If U like my post click on LIKE

  • Editing blog posts: inserting pictures / attaching files doesn't work

    I like the blog-editor in Leopard server. But since a few weeks, it has become impossible to add pictures or to attach files to my posts. Everytime I try to do this I'll get the message:
    "The file you selected is too large (maximum file size is %i Bytes)".
    No matter how small the file size is, it won't work. Very frustrating.
    Any ideas?

    Mars,
    I had this problem also when I was initially setting up my wiki. There is at least one post on this sub-forum regarding the problem.
    Ultimately, I had to edit the server file, /etc/wikid/wikid.conf, every time I restarted the server (though I haven't had the problem lately).
    <key>maxAttachmentSize</key>
    <integer>52428800</integer>
    Those are bytes, so I'm limiting an attachment to 50MB. This should be the default, but for some reason it can get set to zero when you restart the server.
    Good luck,
    RyanR>

  • Adding pictures in imovie doesn't work

    Hi there,
    I am trying to add some pictures in iMovie '11. Up to now everything went great, but all of a sudden, I can't add any pictures anymore. All it does now, is add the last pictures in stead of the picture I swiped into my project. Can someone please help me with this project? It's pretty urgent.
    Thanks a lot peepz.

    EuropaIS wrote:
    Please help!!! It's a brand new iMac for work and we basically bought it to use the iMovie...can't believe it!
    Please read the warranty paperwork that came w/your computer.
    You have 14 days to return the computer w/no questions asked.
    You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
    Strongly suggest that you take FULL advantage of the above before it runs out.  Let Apple deal w/the problems & your concerns. It's what you paid them to do.

  • Sharing pictures doesn't work anymore

    I used to be able to snap a picture, see the picture, and then on that screen, hit the picture and hit the sharing button to message it to someone (or do other things with it).
    Since the last two ios upgrades (6 and above), this feature doesn't work correctly.
    Before:
    1) Click home button
    2) Launch camera using an upswipe on the camera
    3) Take picture
    4) Click on thumbnail in lower left corner
    5) Click on picture that comes up
    6) Select outgoing arrow on bottom
    7) Select message and send pic
    After:
    1) Click home button
    2) Launch camera using an upswipe on the camera
    3) Take picture (btw, my iphone5 pics are *fuzzier* than iphone4!!)
    4) Click on thumbnail in lower left corner
    5) Click on picture that comes up
    6) Try to select outgoing arrow on bottom, but doesn't show up
    7) Click home button
           -- Either --
    8) Launch camera again from home page camera icon
    9) Click on thumbnail on lower left corner of last picture taken
    10) Select outgoing arrow on bottom that *now shows up the second time, but didn't show up the first time* [BUG]
    11) Select message and send pic
          -- OR --
    8) Launch the photos gallery from the photos icon
    9) Choose Camera roll from albums
    10) Try to figure out which picture it was from the thumbnails
    11) Select the picture thumbnail by clicking on it
    12) On the image that comes up, click on it to bring up context menu
    13) Select the outgoing arrow on bottom (the one that doesn't show up in the camera app view) [BUG]
    14) Select message and send pic
    The bottom line is, something I do several times a day, used to work great on pre-ios6 and iphone4, now really *****.  I keep waiting for this to get fixed, but apparently it's not, so I wanted to document the process. 

    Hi,
    It should work.
    Sending any pic file format that Preview can open should be viable.
    Check that you are using port 443 in iChat Menu > Preferences > Accounts > Server Settings rather than the default port of 5190
    iChat by default logs in to the AIm servers on port 5190 ON TCP protocol
    Pics in Chat are sent on port 5190 but on UDP Protocol
    Some routers and modems do not like this dual use of the port and changing the Login port is a works around and the only port you an change.
    Ralph

  • Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)

    Hey lozza567,
    Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Issues with sending and receiving MMS
    You will need these to send and receive MMS:
    - An iPhone 3G or later.
    - iOS 3.1 or later.
    - A cellular data connection. MMS isn't available if you are using only Wi-Fi.
    - A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
    - A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
    To resolve issues with sending and receiving MMS, follow these steps first
    1. Go to Settings and turn airplane mode off.
    2. Go to Settings > Messages and turn MMS Messaging on.
    3. Go to Settings > Cellular and turn Cellular Data on.
    4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
    5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
    6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
    7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
    8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
    9. Restart your iPhone.
    10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    11. Reseat your SIM card.
    If you are still unable to send or receive MMS, follow these steps
    1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
    3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
    4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
    5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
    7. Back up and restore your iPhone as new.
    8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
    9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
    10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
    11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
    Thanks,
    Matt M.

  • My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.

    My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
    The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I have an iPhone 4S.  When I try to print pictures, from my Windows computer, it doesn't work.  Open Office also gives me an "unknown graphic" message.  These are JPEGs, aren't they?  Why can't I print and what is the unknown graphic?

    I have an iPhone 4S.  When I try to print pictures, from my Windows computer, it doesn't work.  Open Office also gives me an "unknown graphic" message.  These are JPEGs, aren't they?  Why can't I print and what is the unknown graphic?

    Hi,
    "A day after the name change became official my built in skydrive app stopped working"
    Did you point that SkyDrive changed to OneDrive?
    Did you move your OneDrive to another location or change its name?
    Please login OneDrive with web-based to check if you could access it successfully.
    Please refer to the following article to try the troubleshooter and check the service status:
    SkyDrive: FAQ
    http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
    Karen Hu
    TechNet Community Support

  • My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    My ipad front camera doesn't working,cannot take a picture this moment,how to fix this problem?

    Try closing the Camera app via the taskbar and see if it works when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • I wish to change my avatar, but after choosing the picture, the upload button doesn't work

    I choose the picture I want to be the avatar, but the Upload button doesn't work. The cursor doesn't change to an action cursor.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutique,

    I can't upload pictures to Facebook Pages albums with my IPad Mini 3. I've tried safari too and the basic uploader doesn't work. I can add photos to the wall but I need to put them in albums for my Boutiqu

    It is peculiar, that Chrome, Safari, and Skype can access FB, but not the iPhoto uploader.
    Do you see any error messages/ diagnostics in the Console Window, when you try to connect to Facebook?
    Launch a Console window from Applications > Utilities and clear the Console Window. Then try to upload. Are there any new messages?
    And also launch a Terminal and have a look, if "facebook.com" is properly resolved:
    Type 
    ping facebook.com
    into the window. Do you see any transmissions? What is the IP address used?
    I see:
    PING facebook.com (173.252.110.27): 56 data bytes
    64 bytes from 173.252.110.27: icmp_seq=0 ttl=243 time=110.486 ms
    64 bytes from 173.252.110.27: icmp_seq=1 ttl=243 time=109.365 ms
    64 bytes from 173.252.110.27: icmp_seq=2 ttl=243 time=110.101 ms
    64 bytes from 173.252.110.27: icmp_seq=3 ttl=242 time=109.829 ms
    64 bytes from 173.252.110.27: icmp_seq=4 ttl=242 time=111.323 ms
    64 bytes from 173.252.110.27: icmp_seq=5 ttl=242 time=110.346 ms
    64 bytes from 173.252.110.27: icmp_seq=6 ttl=242 time=110.708 ms
    64 bytes from 173.252.110.27: icmp_seq=7 ttl=242 time=112.685 ms
    64 bytes from 173.252.110.27: icmp_seq=8 ttl=243 time=124.256 ms
    64 bytes from 173.252.110.27: icmp_seq=9 ttl=243 time=112.106 ms
    ^C
    --- facebook.com ping statistics ---
    10 packets transmitted, 10 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 109.365/112.120/124.256/4.159 ms
    Try the same with "dig":
    dig facebook.com
    ; <<>> DiG 9.8.3-P1 <<>> facebook.com
    ;; global options: +cmd
    ;; Got answer:
    ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 25051
    ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0
    ;; QUESTION SECTION:
    ;facebook.com.                              IN          A
    ;; ANSWER SECTION:
    facebook.com.                    775          IN          A 173.252.110.27
    ;; Query time: 11 msec
    can you "ping" facebook?

Maybe you are looking for

  • One or more post-processing actions failed. Consult the OPP service log for details.

    hi expert plz help me i can't understand here what can i do to resove this error. here is the logfile details of output post processor ebs- 11i (11.5.10.2) os - rhel 4 [9/2/13 4:54:48 PM] [main] Starting GSF service with concurrent process id = 29841

  • Reservation not getting generated

    Dear all, In Repetetive manufacturing.After running  the MRP , system is creating the planned order for fert and the raw materials. How to see the reservation created against these planned order  so that stores person can issue the material to the pr

  • Can you share large files on iCloud drive like dropbox?

    I am exploring how to use iCloud drive now...and had a basic question.  Can you share large files from it in a similar way as you can with dropbox?  This is a great feature of dropbox...or google drive when mailing large files just doesn't work.  I h

  • Problem while opening an application to connect to...

    Hello All, I have nokia 5800. I am able to connect to my office wi-fi with this. And after connecting when I do Start Browsing, I am also able to browse sites successfully. But when I go to home screen -> menu -> internet -> facebook, and try to open

  • So Exactly What's Different, Other Than More Memory?

    The "just released" and long awaited new iPod touch seems to be pretty much of a dissapointment for most folks it seems.. where's all the anticipated features like the camera, or at least a microphone? Is the only real changes then just that it has 6