Picture or section available on PDF format but not HTML format of report?

I'm trying to include a watermark on my report, but it won't show up correctly in the HTML version. It works great in the PDF version so I'm wondering if there is a way to suppress the watermark on the HTML version of the report? Is there any way to do this?

Water marks do not work across WEB pages. Have 2 reports, one for each export type. Or try adding supression to the water mark, you'll ahve to prompt to hide it depending on the export type though.

Similar Messages

After I upgraded to Mountain Lion my ICal will show event times in day, month and list format but not week format. I can click get info to find out the event time but that is cumbersome. I checked the box to show event times in preferences but no go

cannot get times to show on my events in week format since I upgraded to Mountain Lion. I move the event up or down to change times and nothing shows on the event frame like it did with Lion.
I checked preferences and cannot seem to remedy this. Does anyone else have any ideas? Is there sometihing I need to set or is this anot
her bug?

cannot get times to show on my events in week format since I upgraded to Mountain Lion. I move the event up or down to change times and nothing shows on the event frame like it did with Lion.
I checked preferences and cannot seem to remedy this. Does anyone else have any ideas? Is there sometihing I need to set or is this anot
her bug?

Downloaded certain files from my old computer on a memory stick.Have inputted stick into my new mac and can open PDF files but not xlr,aww or eps files.Is there a solution to this please?

Transferred certain files to my new Mac from my old computer via memory stick.Can open PDF files but not xlr,aww or wps ones.The important ones are in xlr format.Is there a solution please?

My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion.

Chararacteristic 0CALQUARTER is available in version M but not in version D

Dear Sirs
I hope you're doing fine. While activating InfoCube 0PUR_C01 I get the following error:
RSAU709 : Chararacteristic 0CALQUARTER is available in version M but not in version D.
(Yes, the word characteristic is misspelled in the message text)
There is no more detailed information so I'm stuck..Please help.
With best regards
Manuel

Try executing the function module RSDG_IOBC_REORG function module in transaction SE37 (F8 -> single test) with the following parameters:
Function module RSDG_IOBC_REORG
Import parameter Value
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
F8 -> Execute

¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

¿Dear Sirs,
I can create with "Photoshop Elements 12", a PDF file of several pages?.
I can create a "pdf" file, but not of several pages.
Thank you
Valentín Uriarte

This is the Photoshop Elements forum.
If you are using Acrobat, ask Here:
Acrobat

Photo collage backgrounds and themes available in Elements 8 but not in PE 11?

How can I use the photo collage backgrounds and themes available in Elements 8 but not in Elements 11?

Hi gcannice,
In PSE11 Adobe moved most of the backgrounds, frames, graphics and themes online. That's why you are not able to see those themes, as those are still not downloaded in your machine.
You will have to keep your Editor launched (with internet connection on) for sometime, in order to see the thumbnails.The online content is differentiated by a blue ribbon on them. Double click on the blue ribboned thumbnail to download the actual content.
Adobe did this to save lot of amout of space on your machine, and make installtion process faster.
-Rahul.

Characteristic 0DOC_NUMBER is available in M version but not in D

Hi,
While installing cube Sales overview - 0SD_C03 in simulate mode, the system is throwing following error :
'Characteristic 0DOC_NUMBER is available in M version but not in D'. This error is shown for other objects also like .
so pls let me know . how to resolve

Txs for ur reply.
i did the same before
and i tried doing it again and again. but the same problem..
its already active.
still the same problem when i do the installation for cube

Aperture photos available in 'screen saver' but not 'desktop'

In 'System Preferences' the Aperture photos are available in 'screen saver' but not 'desktop'.
Any ideas?

Brian,
As far as I know, those two lists come from the same place. I've always seen them both contain the same items. However, they do not look the same for some reason. Under Desktop, I have to open several disclosure triangles before I get to my Aperture photos, but with Screen Saver, they are already open at the top level.
That being said, first things first: have you tried the [Troubleshooting Basics|http://support.apple.com/kb/HT3805]?
nathan

Garage Band is recognizing ".aif" format loops but not ".aiff" format loops

All of the ".aif"-formatted loops (from Jam Packs, etc.) are showing up fine in the Loop Browser, but other loops I bought from third-party vendors that are in the ".aiff" format are not showing up at all in the loop browser. They are all in the same correct folder for loops on my system along with the working Jam Pack loops. I tried dragging and dropping a bunch of these loops onto the blank space on an open session based on some advice I read on the internet, and Garage Band processed them (and created new instrument tracks on the screen for each loop) but they did not subsequently show up in the loop browser as I had hoped. Do I need to reformat these to ".aif" somehow? Any help with this would be greatly appreciated.
Thanks.

Just to follow up, draggging the loop folders into the loop browser didn't work exactly on its own, but I got it to work in the following manner. First I went to the finder and deleted the apple loop indexes in each of the two locations where apple loops are stored in my computer (note to Apple: why multiple different folders for Apple Loops?). Then I dragged all of the Apple Loops that were stored in the second loops folder (in the Library under "Audio") to the first Apple Loops folder. Then I dragged both entire Apple Loops folders (required even though the second one was now empty) into the loop browser. Upon dragging the second one in, Garage Band automatically began reindexing my loops and then everything showed up in the loop browser correctly, finally. Apparently both (or all) locations where Garage Band stores loops must be individually dragged into the loop browser to trigger the reindexing process. This process was harder than it should be and I feel like it represents an annoying bug in Garage Band, in addition to the help from this post I also had to google research the problem for quite some time to figure out this process.

ICloud available for Windows Vista, but not Snow Leopard???

I have Multipal Macs with the Core Duo chipset that can not run LION and no $$$$ to upgrade hardware right now.
WHY does Windows VISTA get iCloud suport but I who can't upgrade to LION do not?
I understand leaving out Leaopard, but SNOW too?

With the removal of Rosetta in Lion and the requirement for Lion in order to use iCloud Macs are no longer an option for poeple that need to be able to run older applications.
Many places bought Macs because they could run just about anything, Windows, Linux, PPC software, even Classic applications via Sheepshaver.
The big issue is the loss of being able to run PPC applications. Freehand, Pagemaker, Framemaker, Quicken to name just a few applications that will never be ported. People and businesses have huge amounts of documents in these formats. It's not stuff that is used regularly but it is files that need to be accessed and sometimes modified.
All these applications can run on a modern Windows machine as can iCloud but not on a Mac running Lion.
While I'm complaining... I setup a bunch of Macs, iOS devices and some PCs all on iCloud today. The loss of email account syncing meant I had to spend hours setting up email on each machine ( each device had just under a dozen accounts on it) instead of just one machine and having it propagate to all the other devices. Going to be real fun trying to keep email rules in sync on all the Macs.

How do I access a downloaded ringtone? It's available on my iTunes, but not on my phone.

The tone was ONCE available on my phone, but I've no idea where it went. It remains on my iTunes page, however.
Any ideas?? Thanks!

Just curious, what did you do to fix this? Hide it in iTunes? Delete all the music from your phone?

PDF Software causing problems in sending some PDF files but not all?

I have been having problems sending some emails with PDF attatchments, they are being returned more and more frequently. I've spoken to our server host and his answer is as follows saying that the problem is we are using "cheap PDF software" which is why I can send PDF's via Gmail or Yahoo but not through our server. He suggest we buy a more expensive software or using Gmail for our important bids and invoices that are sent daily.
My question is: Is this even close to what could be causing the problem. We are using Adobe to create our PDF's using our HP CM1410 or the Neat Scanner. The Neat is a new device but the problem was ongoing before the Neat Scanner was added.
Our IT person who set our network, hardware and software says it's the server and he's never heard of this being an Adobe problem. So we're stuck not knowing who to believe

There are several potential problems. It could be that your e-mail client is not encoding the PDF properly, but looking at it as an ASCII file (7-bit characters). The encoding is not as much of a problem anymore, but still a potential issue. The structure of the PDF that you are getting from the scanner may be corrupt. You can use some of the preflight scripts to check the integrity of the PDF. You might even try saving as a new PDF to see if the 2 versions work differently.
It might be better to print the proposals you mentioned to the Adobe PDF printer and get better quality proposals than you would get with a scan. That would also probably avoid the problem you are having.

Infinity available on my Exchange but not on my st...

Just wondering if someone can explain what's going on here. I'm on the Haslington exchange, which has now been enabled. There are 3 cabinets all within 800m of my house that have been upgraded, and have whirring equipment in them so they would all appear to be active. I know which cabinet I am on as a recently retired Openreach engineer lives on the next street along, and has told me which one my line is connected to which is one that is ~650m from my house. It's also the same one he is on and the tracker will allow him to order at 37 meg, he is a little closer to the cabinet than me.
I've been checking the BT Infinity checker for a while and it's always said 'Infinity is not due to be rolled out in your area' under my phone number. A while back I was able to search by post code, and it said something like 'Good news, Infinity is coming to your area' but I can't seem to find that link anymore?
Now as I know the cabinet I was on was upgraded a few months ago I called BT last month who checked, and told me there was an error in the tracker and that I would definitely be able to order Infinity at my house and that the current enablement date was 31 March though this was subject to change.
I've just learned that some of my neighbours in surrounding streets have been able to order Infinity, and have estimated download speeds of 30-40 meg, so today I called BT and asked if I could order.
I was first of all told that Infinity is not available in my area and my exchange probably has not been enabled. I questioned this as I know I am on the Haslington exchange, I was then told that I can't be on the Haslington exchange. I then politely asked to speak to a supervisor. I was then fogged off again with various excuses from me being directly connected to the exchange (which I am most definitely not) to I was on a different exchange.
I then recapped to this supervisor on what I already knew about my line, he then went away for a few minutes and came back and said that he could get me on a trial, which is part fibre but not at the full speed. He couldn't really explain any more but said his info was showing that I would get download speeds of around 10-12 meg, and up of 4-5 meg.
I've actually gone for this option as I can upgrade to Infinity if and when and I am fed up of ADSL2....my line from the exchange is about 2.5k I believe. But how come people the same distance from the cab as me can order Infinity at 30-40 meg, yet I can only get this 'trial' of 10-12 meg? And exactly what is this trial called? I have tried searching the net but unable to come up with any results???

I live 50m from the nearest cabnet, within a 600m circle there is 6 cabnets. Sad thing is i am not being enabled for infinity, everything around us is being upgraded except our road for some odd reason. I had a chat with an openreach eingineer working on one of the cabnets, he said they finished upgrading the designated cabnets. I asked about my road he had a quick look at my address and said there was no plan for that cabnet. Soo upset...
Just to show you guys how close, the cabnet will be staring me in the face
-Red arrow is me
-Green box with black line is infinity cabnets
-Green line infinity enabled roads
-Black box is the cabnet we are on
-Red no infinity
Looks like my only hope is if for some reason BT decide to deploy FTTP which is highly unlikely. Dont blame BT's choice, upgrade the cabnets with most people. Our cabnet has fraction of the people compared to the other cabnet which has 3 estates connected to it.

Infinity Available in surrounding streets, but not...

Hi,
I've done a lot of postcode searching this morning and it looks like most of the streets surrounding mine can get BT Infinity, but I can't.
I've done an online chat and rung customer services, but apparently BT Wholesale aren't able to get any more information out of BT Openreach than the online checker.
I've seen older posts on here about a mod contacting them, but the link in the thread - https://community.bt.com/t5/BT-Infinity-Speed-Connection/Surrounded-By-BT-Infinity-But-not-in-my-str... - isn't valid anymore.
Is there anything that can be done nowadays? I'm really hoping it's either a database error or, at worst, I can get hold of a likely date my cabinet will be enabled.
Any help would be greatly appreciated. Thanks
https://community.bt.com/t5/BT-Infinity-Speed-Connection/Surrounded-By-BT-Infinity-But-not-in-my-str...

Hi dufeu8881,
You may now come under the Connecting Devon and Somerset BDUK programme.
For more info on the Connecting Devon and Somerset BDUK programme go to: http://www.connectingdevonandsomerset.co.uk/
You can try contacting Connecting Devon and Somerset via http://www.connectingdevonandsomerset.co.uk/contact-us/ with your landline number, address and exchange to see if they have any more information regarding whether you are/will be in a NGA area or to see if your property will be in scope of the SConnecting Devon and Somerset BDUK programme.
It may take a week+ or so to get a reply.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Display word/pdf document in the HTML region or report

Hi,
How to display blob content stored in a table in HTML region or report region.
I already have a process to display the image content.
But my question here is how to display word/pdf document within the html region so that the user can read the document without downloading it.
Any suggestions/solutions would be of great help.
Thanks in advance...
Thanks,
Ramesh P.

I was dead wrong.
The display of images from BLOB is a special case because APEX provides a Display Image item type.
Moreover, HTP/HTF packages also do not provide for handling of BLOB content. So AJAX cannot be used.
Which implies that the only way to get binary content, other than images, is with the use of a WPG_DOCLOAD.DOWNLOAD_FILE call.
This in turn implies that it may not be feasible to "inject" the BLOB into an exist HTML DOM in the Browser.
Regards,

Picture or section available on PDF format but not HTML format of report?

Similar Messages

Maybe you are looking for