Picture post failure on Edge

i am running into this problem on MsEdge the browser for windows 10 and i am unable to provide the picture to upload from my pc and i had to exit and then go to internet explorer to do this and here is the Screen Shot to show you what it is doing from the Screen Shot it will show you the faded after clicking " insert image "

Rixander wrote:
screen cap blank ? not sure what you refering to but i did the exact same on ie no problem just the edge would not process and this is on windows 10 i have always used the browse function to locate and i selected the picture which is shown on the screen shot at the lower section and it is the intended picture i wanted to post The picture you posted is known as a "screen capture" or "screen cap" for short... In it, the text box next to the "Browse" button has nothing inside it - ergo it's "blank". Just trying to help fix this issue. I've already run into some strange issues with Win 10 and this Forum software. Cut and Paste via the right-click button fails often. The solution may lie with the lithium company having to update this Forum software! WyreNut

Similar Messages

How Can I Do a Motion Picture Poster Credit Block?

Is there an "automated" way using styles (or something) to create a motion picture poster credit block? Typical of the formatting is for an artistic task to be stacked on two lines flush right to the name that follows which is the height of the two stacked lines. So you might have execuive producer 10/9 flush right Univers 39 with the producer's name 22 pt. But immediatelly following that on the same visual line you might have directed by on two lines followed by the director's name. The way I am doing it now, each name is it's own little "production" requiring extra spaces to line things up visually and the constant use of baseline shift. There's gotta be a better way.

The way I am doing it now, each name is it's own little "production" requiring extra spaces to line things up visually and the constant use of baseline shift. There's gotta be a better way.
Sorry for not carefully reading your post. I suspect Peter's right that you'll need some kind of table or repeated text boxes. But you can get a list item stacked using a variation of the right left tab example I posted and avoid lining things up with spaces and baseline shifts or creating a complex table. This could be done with two nested styles and then just step and repeat the text box:

GR Posting failure

Dear all,
I got a problem with GR. The scenario is procurement from PR, then created PO reference to PR, then do GR with PO, but posting is failure. The error message : <inadmissible movement type - acceptance at vendor set for PO item--Message No. M7429> came out at GR. The PR,PO is without material master data (with material group), so that is non-stock material, and we have to enter the cost center and G/L account when we create PR. I guess something happened in FI side to make posting unsuccessful. Thanks in advance.
William
Edited by: william w on Apr 6, 2008 2:24 AM

The problem is fixed by someone, but the problem is the same mentioned by Dhinakaraj J. Thanks all. Dhinaharaj J, he should get reward from me.
William
In the PO in Delivery tab, the origin accept is checked, it means that the material as been accepted at the source. thats why if u use 103 Mov. type for GR, which is movement to Blocked stock, the system throws this error "Inadmissible movement type - Acceptance at vendor set for PO item".
Here once the material accepted at source (Origin accept indicator checked), the migo is done by using 107 mov. type (GR to valuated blocked stock). after receving the material at plant, the migo is done by using 109 mov. type (GR from valuated blocked stock)
reward if helpful.
Edited by: on Apr 7, 2008 1:54 PM
In the PO in Delivery tab, the origin accept is checked, it means that the material as been accepted at the source. thats why if u use 103 Mov. type for GR, which is movement to Blocked stock, the system throws this error "Inadmissible movement type - Acceptance at vendor set for PO item".
Here once the material accepted at source (Origin accept indicator checked), the migo is done by using 107 mov. type (GR to valuated blocked stock). after receving the material at plant, the migo is done by using 109 mov. type (GR from valuated blocked stock)
reward if helpful.
Edited by: In the PO in Delivery tab, the origin accept is checked, it means that the material as been accepted at the source. thats why if u use 103 Mov. type for GR, which is movement to Blocked stock, the system throws this error "Inadmissible movement type - Acceptance at vendor set for PO item".
Here once the material accepted at source (Origin accept indicator checked), the migo is done by using 107 mov. type (GR to valuated blocked stock). after receving the material at plant, the migo is done by using 109 mov. type (GR from valuated blocked stock)
reward if helpful.
Edited by: Dhinakaraj J on Apr 7, 2008 1:54 PM
Dhinakaraj J on Apr 7, 2008 1:54 PM

I have lost all my pictures post August due to uodate

can anyone explain where all my pictures have went? I have updated to iOS8 and lost everything post August

You are in the Mavericks forum and not the iPhone forum. However, you should have not lost any photos updating to IOS8. Did you have an iPhone backup on your Mac or iCloud? If so you can restore from there.

K8N Neo2 Platinum POST failure

System has run great for more than a year. Now, system hangs in POST. No beeps. No display. D-Bracket lights 1 red, 2 green, 3 green 4 red (Processor init). Disconnected extraneous devices - no effect. Swapped video cards - no effect. Reseated CPU and memory - no effect.
System did boot once after failures started and ran fine for 3 days - had to restart Windows and boot problem started again and won't go away. The fact that everything ran fine after it managed to boot that one time makes me think the CPU & memory are OK. Now, system hangs in POST every time.
I don't know what to make of the D-Bracket lights which seem to indicate a CPU problem when CPU seemed to be working fine the one time it managed to boot in the midst of all the hangs.
Any ideas about what to try next. My thoughts point to a motherboard failure, but I hate to start randomly replacing parts.
I'd sure appreciate any help anyone might be able to offer.

Quote from: tomkk on 24-February-06, 00:39:38
OK, seems I did everything but clear CMOS settings and that corrected the problem. Many thanks!!
Now, for my own education, I've been dealing with these things for 25 years and I've never seen a CMOS setting change so it screwed up the system this way this way. Somehow, one or more of the settings apparently changed and had to be reset via the CMOS clear. What would cause that to happen? Do I have some other problem waiting to happen?
Thanks for the help.
It can happen sometimes.
Could be caused by a crash, powerdip, or a peak in the ground current... Theoreticly a source of radiation (table fan, cell phone, DECT phone, etc..) could also cause bios settings to change spontiously.
In my case it's usually my 7 yr old nephew , but has happened twice in 3 years without him around, and the board worked fine afterwards. So nothing to be worried about

IPhone Picture Transfer Failure

Hello,
I hope someone can shine a light on what is going on. I tried transferring pictures from my iPhone 4 to to the "My Pictures" folder on my PC. To do this, I simply performed a file transfer by "selecting all" and copying the pictures to the "My Pictures" folder. Upon completion, the picture files were created with no image (0 bites). Strangely, prior to moving them all, I experimented with a few picture files using this very same method and the pictures transferred fine. Any ideas as to why this is happening? Thank You all for your time!

i would try to copy those photos by batches to if there's a corrupted file that's affecting the transfer. or try importing it using windows scanner and camera wizard or other application that can import photos.

Walking-One / POST Failure

Hi All,
Apologies if this is the wrong area for this, and please feel free to relocate.
I have a faulty 3750 at work that was given to me. It's RMA is expired. When booting, I get the following:
TCAM (asic:0) walking-one test failed
Write: 80_00400000_00000000-00_00000000_00000000
Read: 80_00000000_00000000-00_00000000_00000000
HTD POST: Walking Ones Test Failed
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed
POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP
driver class subsystem initialization failed
!!! WARNING: The switch is not usable !!!
It appears that the main problem is that it doesn't think it has any interfaces installed.
Switch#show run
Building configuration...
Current configuration : 563 bytes
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
no service dhcp
hostname Switch
boot-start-marker
boot-end-marker
no aaa new-model
port-channel load-balance src-dst-ip
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip classless
ip http server
ip http secure-server
no cdp run
control-plane
line con 0
line vty 5 15
end
I would love to have a working 3750 for my home lab, so is there anything I can do to fix it, other than trashing it considering it's no longer under warranty?

Nope, it's dead.

Any suggestions on fixing picture messaging failure

I have trouble sending picture messages and group messages on my 4s. I have tried AT&T and Apple support - nothing works. Is it my phone?

If there is Warranty or AppleCare take to Apple. Repair steps are replace home button flex cable. If still problem, replace charging dock with flex cable. If still problem, most likely logic board and there is no reasonable fix. You can also use Virtual Home button, Settings App > General > Accessibiltiy > Assistive Touch > ON > tap new white screen button > Home.

845GLM/cele 2.4 - POST failure No Beeps

Hello Guys,
here is the run down
This is a completely new computer for my sister. All parts were purchased new.
845GLM Motherboard
2.4 Cele
Generic 2700 DDR 512 mb
Generic case w/ 400 watt ps
Everything went together well, no issues.
The box will not post, It will not give me a single beep w/ just the ram and CPU in. it has onboard nic and video as you know, so I cant remove those.
If I pull the ram I can get it to give me a continuous "long beep, pause, long beep, pause, long beep" and so on until I power it off.
Any ideas? Everything looks ok but I just wanted to get a second opinion. I have never liked the "no beeps" so I just thought i'd post here for some info.
Thanks,
Scott

Thanks for the reply Assaf,
I did have a spare chip that I tested with as well, I forgot the mention that. I did test with a 512 of Mushkin enhanced 2100 DDR as well. I get the same results with this memory.
I have also pulled off the heat sync and reseated the cpu and that did not inprove the situation.
Any ideas anyone?
-Scott

Vertical letterbox problem..please help!! pictures posted..

I am working on making a surf video... most of the footage i shot and edited was anamorphic 16:9....recently i decided to only shoot 4:3...so now, i have a few random 4:3 clips w/ vertical black bars on anamorphic timeline?!?!? does anyone know how to get rid of the vert. letterboxing?! or is there a way to convert those few 4:3 clips to widescreen in post-production to save time?
normal anamorphic 16:9 frame grab
[IMG]http://i20.photobucket.com/albums/b215/SHAKINGHANDSVB/example.png[/IMG]
4:3 frame grab w/ the vertical letterboxing.
[IMG]http://i20.photobucket.com/albums/b215/SHAKINGHANDSVB/wsexample.png[/IMG]

hopefully these work.
16:9
<">
[IMG]http://i20.photobucket.com/albums/b215/SHAKINGHANDSVB/wsexample.png[/IMG]
4:3 w/ vertical bars
<">
[IMG]http://i20.photobucket.com/albums/b215/SHAKINGHANDSVB/example.png[/IMG]

K9N6PGM-F Post failure no vidio out on post no evidence of post

Components are as follows:
MSI K9N6PGM-F Socket AM2 NVIDIA GeForce 6100 Micro ATX AMD Motherboard
AMD Athlon 64 X2 3600+ Brisbane 1.9GHz Socket AM2 Processor Model ADO3600DDBOX
Kingston 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5300) ECC Registered Dual Channel Kit Server Memory Model KVR667D2S4P5K2/2G
400 Watt pawer supply
I'm just starting to put the system together, I connected the power supply, the power sw, reset switch and speaker switch and VGA out on MB to monitor, both memory modules are installed, no HD attached, CPU and CPU Fan installed.
My problem is as follows:
When I power on the cpu fan comes on , but the Monitor/vga out detects no signal from the mother board. The board will shut off if I give it the 8 second power switch depress. The monitor is good and the cable to the MB because I tested both on my laptop's VGA out port.
Also of note: I hear no "beep" from the speaker during power up.
I tried the following:
1) I bought 2 old PCI vidio cards, alternated between them and the MB, no output on the 6yo PCI cards for post.
2) I bought an identical MB (same part number), and the identical problem cropped up.
Did not matter if I resent BIOS options, did not matter if board was bare (with out any PCI pluggeg in) with VGA out on MB or PCIVID plugged in with VGA ccable plugged to PCI card.
Both respond to power switch on/off commands.
I read as related posts, seemed the only similar problem had to do with the memory that might cause this, I guess my next step is to buy a cheap memory module that is compatable and try that.
Any help is greatly appreciated.
I'm running a basic power-up test that I run before I connect more components, but right now it's not passing this basic test, and since I have the same problem with an identical MB, the problem is following the motherboard as a bios or compatability issue, not a defective board problem.
-Lee

Use standard Non-ECC Unbuffered memory DDR2 sticks

P35 Neo2 POST failure

Hi
Have just built a brand new system consisting of MSI P35 Neo2, Intel Core 2 Quad Q9550, XFX 9800GT, Corsair XMS2 DDR2 800, Seagate HD, Samsung optical drive. All items obtained from one (internet) supplier.
Problem is: PC powers up but won't pass POSTs.
According to LEDs on mobo it gets to POST step 10 (testing base & extended memory) but stops there. i.e. it wont get to step 11 (assign resources to all ISA).
Monitor displays initial MSI graphics.
Can't enter BIOS setup.
Pressing TAB or DEL during initial MSI screen does allow display of BIOS version (1.8) & 2048MB OK, but nothing more.
Mobo was returned to supplier who apparently cleared CMOS, tested, found no fault and returned.
After re-building, exactly same problem was observed. I've cleared CMOS again by removing battery but no improvement.
Mobo advertised to be compatible with my processor, but is it?
Certain forum threads hint that maybe I need to upgrade BIOS for use with 45nm processor, but as a beginner I'm not sure how one upgrades the BIOS with a PC that won't even boot to BIOS setup.
Been sitting for weeks with an exciting looking system which won't even boot!
Any help will be very gratefully received.

there is nothing wrong with mobo or bios, you have bought an overclocked memory default voltage 2volt.
power pc press delete and hold it till you get into bios then go into cell menu section. in there you have to set the cpu and memory setting from auto to manual and change the memory voltage from 1.8 to 1.9 or 2 volt save and exit .
post a reply then we can guide for the rest (first step is to boot the pc for the window to load)
use only one memory stick in slot 1 (closest to cpu) first. then we add other memories.
it is compatible but overclocked.

POST failure D-Link DWL-520+ Wireless

Problem after adding D-link DWL-520+ wireless card. MSI 6195 Slot A BIOS A6195KMS V1.3, AThlon, WIN98SE with latest updates.
Fails in post 0101 VGA. But is not entirely consistent.
Removed all cards except ATI RAGE II problem persists but can boot 10% of time.
Removed DWL-520+ and booted to alter memory range of ATI card. Can now boot reliably and have wireless card working. However system remains a little unstable with random lookouts.
Second DWL-520+ gives same symptoms.
Any suggestions please?

In fact D-link came up with the later driver (which incidently is freely available at http://www.dlink.com.tw). So I made just one more attempt.
In between times I also tried this card in an ABit machine and it liked it even less!
So on about the 17th boot of the MSI6195 Win98 loaded and then after a while it locked up. This process corrupted the Windows registry so badly that SCANREG was unable to recover the situation.
I am therefore returning my D-link 22Mbps PCI card and have instead deployed a Linksys USB adapter. This interworks quite well with the remaining D-link PCMIA card and router. Obviously this will be at 11Mbps instead of the planned 22Mpbs. But that seems to be the price of reliability!
I can recommend the Linksys USB unit. It's compact, USB powered and has one little wrinkle if anyone is interested.
Thanks for your help.

Apple TV 2 Wobbly Picture (Post TV Model & Input)

TV: Sony Grand WEGA KDF-60XBR950
Input: Dynex™ 6' DVI-to-HDMI Digital Video Cable

http://discussions.apple.com/thread.jspa?messageID=12520225
Search near the end of the thread. . .a solution is provided.

How to fix data post failure of IBY_FD_RECORD_PRINT_STATUS

Multiple (17) instances of IBY_FD_RECORD_PRINT_STATUS concurrent program were waiting on "latch: cache buffers chains" for the same Sql Hash Value of 1286279379. We expected the 17 instances to finish within an hour. This concurrent program was terminated through the GUI after 12 hours .
This is the last program that is run before our process extracts data for OFS db for use in other processes. I believe that the program updates ap.ap_invoices_all (payment_status_flag = "Y") and ap.ap_paymens_schedule_all (payment_status_flag="Y") and removes rows from ap.ap_selected_invoices_all table.
Now we want to manually "fix" the data.
We believe that updating the two tables listed above and removing the invoices from the ap.ap_selecte_invoices_all table will put the data into the status that will allow new data to be loaded.
We need to know if this process is correct. Please advise.

So can I just buy a new hard drive to fix it? If so that isn't a problem

Picture post failure on Edge

Similar Messages

Maybe you are looking for