Picture quality drop out after export

Ok so i just finished my first project in FCP. I need the project to be exported as a windows media player compatable format. That was no problem. the problem is that after i export the project, when i replay the project in quicktime to check it, the picture quality is utterly horrid. in FCP's preview window it looks fine, but in quicktime the picture is grainy, and pixelated, the video seems to leave a trail behind any motion, and also the video looks like it was smudged. Unfortunatly i only have a week to fix this because i am entering the video in a contest. if anyone can help i appreciate it greatly.

well, I'm making an AMV. Anyone who doesn't know what an AMV is it's a music video made from Anime shows. i know that's kinda below the programs capabilities, but it's a good starting project. Anyways. the video files i am using are AVI files. i generated the WMV files by using the export with quicktime converter function. as far as sequence settings i'm not sure how to check those. I don't have to use WMV format for the final video, but any format that it compatable with the windows media player program. As I said in my last post, I'm entering the video in a contest and one of the rules is that it has to be windows compatable.

Similar Messages

Help! Audio drops out after export

Hello
Whenever I export anything full quality from Final Cut, parts of the audio are lost. Could anyone help?
Thanks,
Max.

I had that problem frequently, mainly in FCE, and was told to try various renders and mixdowns on the audio until it finally works (haven't quite figured out why one works one time and not another).
I learned to look at the color bars (maybe not the right description) on the top of the tracks to make certain that my audio was mixed down completely, and now I don't get dropouts.
One more thing: when I played back without mixing down audio, I got a dropped frame message. This usually resulted in annoying pops in my soundtrack that I couldn't eradicate. I'm a lot more careful about rendering and mixdown, now.

Sound drop out when exporting to Quicktime movie.

One track of three sound tracks drops out after a few seconds then reappears a few seconds later when exporting to QT Movie. The project functions perfectly when printing to video. Am using QT 7.1.3 FCE HD 3

Hi(Bonjour)!
Try to make an "audio-mixdown" of your final sequence
in timeline.
Michel Boissonneault
Thanks for the info. I managed to overcome the problem initially by copying onto miniDV then re-capturing and exporting the result., but Mix Down is much nicer.
However, prior to upgrading to FCE-HD, I am fairly certain I have made more complex projects with no problems. Now quite frequently I get a message suggesting I reduce the number of RT tracks, or increase the speed of my computer. Is there something in FCE HD that requires these modifications, or have I a rogue project.
Does anyone know what is the actual difference between High Medium & Low qualities with Audio & Video?
Thanks
Roy

TS2972 Home Sharing on Apple TV (2) drops out after about 2 minutes

Home Sharing on Apple TV (2) drops out after playing iTunes music and photos for about 3 minutes. iTunes says Home Sharing is on, but the only way to get it going again is to turn off Home Sharing and sign in again to Home Sharing when it will work for another 3 or 4 minutes maximum. This happens with both computers on the network. Have turned the firewall off but it makes no difference. Any suggestions please

Going to try a signal booster this all started with the TV upgrade. The only reason for the network booster is because iPhone 4 freezes in facebook once and a while. I am trying to solve this problem for my brother my system works with my airport and imac with no issues yet. All brand new.

Just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min or when changing movies.

just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min of when changing movies. I have to turn off and turn on home share to stream again. Should i return all my apple products and go android instead....help, I want it to work. My firewall is off, ATV2 is running on ethernet and library is on wireless. My ps3 streams just fine over the network, I assume Itunes is at fault?

Please any one who comes across this and shares in my fustrations please click below and lodge a complaint. There is no solution to the dropouts until apple sorts it...Lets get the message across loud and clear
http://www.apple.com/feedback/appletv.html

WIFI DROPS OUT AFTER MOUNTAIN LION UPDATE

Since upgrade to mountain lion my wifi keeps dropping out after sleep i have ipad and that is ok.

Had the same problem and this worked for me:
Try deleting following two items:
~/Library/Preferences/com.apple.dock.plist
~/Library/Preferences/com.apple.dock.db
Make sure you take a screenshot of your current dock since deleting these files will reset your dock to default.
Now open terminal and do a sudo reboot w/ your password.
This solved the problem for me.

HT1695 I have an iPhone5, when at home I can connect to my bt WiFi but it drops out after a few seconds, I Amon iOS 6.0.1

I Have an iPhone5 so has my wife, when we connect to Wifi, any wifi, home work or anywhere, it drops out after about 10 seconds, any ideas welcome

I have three suggestions for you (try them in order):
Go to Settings on your iPhone 5, General, Reset (all the way at the bottom), and try "Reset Network Settings".
Turn off your router and modem, wait about 5-10 minutes, then turn on your modem and router respectively.
Call Apple Support. Chances are they'll be able to give you the best support since they know their phone and the problems they've been called about prior to yours. Make sure you have some of your router information ready for them when the time comes.

Apple TV Drops out after 5 minutes

Hi,
Just got a 3rd Gen ATV and connecting through BT Infinity with a Home Hub 3 in the UK - when playing music, appears to be ok. When watching downloaded programmes from the MAC - it plays for about 5 minutes and then drops the connection to Home Sharing back to the main menu. I then reselect the programme within ATV and it plays fine for the whole duration without drop out.
When trying to watch a recent iTunes festival concert - the same thing happens, it drops out after about 5 minutes streaming but t

I've had the same issue since upgrading to latest iOS 5.1 on appletv and latest patches on mountain lion mine usually drops out after a minute

Audio Drops Out After 30 Seconds

I have just installed Premiere Elements 12 on a new Toshiba with Intel i5 and windows 8. When I play a viedo through Elements the audio drops out after 30 seconds. When I play the same viedo through Windows audio does not drop out. I have an older HP with Intel i3 and Windows 7 running Premiere Elements 10 and I do not have any issues with the audio dropping out. This is the first time I have used this forum so I hopr I'm doing this properly. Thank you, Bob.

With a slower machine like that, it's possible you haven't given the program time to fully conform the audio and video in your file.
Clear the file from your Project Assets and re-add it to your project. Watch the progress along the bottom of the program and wait until it has completed its conforming before you start editing.

S20 Lan Network drops out after Windows 10 upgrade

Upgrade went ok and everything seems to work ok, but the network drops out after some downloads. Adapter gets disabled and cannot be enabled unless i perform a reboot. The network adapter is a Broadcom NetXtreme Gigabit Ethernet. Installed the latest Lenovo System Update but that did not find any new drivers.

The network speed went down from approx 50 Mbps to 1.8 Mbps after the upgrade! So it is surely a network driver problem.

Apple Airport Express dropping out after song finishes.

I need some help finding out why my Airport Express sometimes drops out after a song has finished? Itunes has moved onto playing the next song but the sound is no longer playing through airtunes. If I pause and play the song it will come though the speakers again. This does not happen every time I use air turns but everynow and again.. Can anyone help me with this? I do have my Airport express set to get updates every week so Im sure I should have the latest updates.

Welcome to the discussions!
Tesserax discussed the reasons for this and possible improvement for this problem in a recent post. See the link below:
http://discussions.apple.com/thread.jspa?messageID=11542774&#11542774

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Tracks dropping out after fades

Hi all!
Lately I've been experiencing strange behaviour in Logic when mixing orchestral recordings. For instance now I'm mixing 64 tracks of 24 bit 48kHz orchestral stuff. When editing I'mcutting and moving all tracks together to keep timing and making fades to mask the cuts. When playing parts of the music with frequent edits/fades, some/all tracks will drop out immediately after the fade and then play again together with the rest after a while. There's no peaking on any cpu or disk I/O meters, far from it. I can get contious playback over problematic regions by starting just before them in time, but then I will get dropouts later down the timeline.
Are anybody else seeing this?
I'm running a 2x2.66 6-core w/32GB ram and all project files are located on a 4 TB striped RAID.
Best regards,
Ginge

Well, I think I've solved the next step...
I went into the project, and removed alal the effects. I had compression and reverb on just about every track, and a couple of plugins on the master. I switched them all off, and all the parts played. So this now does become a RAM issue, right? And how do I get from where I am now to where I want to be? I guess these are my next steps:
1. Go through each track and be more judicious in the use of effects.
2. If that doesn't help, export each track with effects, and drop into the project.
Any other thoughts? Oh, and thanks once more for helping!
Mike

Video playback slow and audio drop out after render

Hi
I have downloaded a trial version of After Effects from the cc,
Problem is everytime I render ou,t the video playback is slow and the audio drops out
This happens with AVI or Quicktime files.
Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
Render/export in Premire pro is fine.
Can any one help.
Regards Phil Green
Blue Room Media.

It sounds like you might be hitting the space bar in hopes of getting real time playback. Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively". You can frustrate yourself in a hurry.
But this can really help;
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

Audio drop out after burning to iDVD

I am running FCE 2 and checked all of my audio (mixed it down and everything). Plays well when I run FCE. When I burn the clips to iDVD, I notice that the audio drops out in certain scenes, and it's the same scenes. Ruined 5 dvds so far after trying to a few things.
I am using all internal HDs (Extended Journaled). Any suggested would be appreciated. Thanks

Hi
a. Audio from iTunes - has to be used by a work around
I do - create a Playlist in iTunes with needed audio
Burn out as an Audio-CD (.aiff) Not .mp3
Use this audio in Your FinalCut project
b. I do from FCE/P to iDVD
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME Conversion (Important)
c. To get iDVD to run OK
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk ! (others of no importance)
• I use Verbatim DVDs
• DVD-R
• Burn speed set down to x4 or x1 (only relevant to newer iDVD)
(Instead download the Hack (Hurz and Pfurz) that makes it possibly to do a DiskImage with iDVD4
if earlier iDVD versions - forget this
then save as a DiskImage - test it with DVD-player tool and see that it runns OK
THEN do the actual DVD burn by using Disk Util tool from this DVD image You just did.
AND Here You can set down burn speed to x4 or x1.
• iDVD 4 disc image burning can be enabled through the patch Hurz and Pfurz - search the net.
Good luck Yours Bengt W

Picture quality drop out after export

Similar Messages

Maybe you are looking for