Picture stops sound continues

I have never seen this before snow leopard. Anyone have any ideas?
Using FCP 7.0.2
Blackmagic multibridge 7.6
using safe RT w/ dynamic playback.
g-tech's g-speed es raid5
Timeline ProRes422

David Harbsmeier wrote:
If this is happening in the Canvas window, set the window to "Fit to Window" or smaller. Also look in the View menu under External Video and make sure All Frames is checked.
-DH
Thanks,
but it is in canvas and output monitor. All frames are checked and windows are fit.
Doug

Similar Messages

  • I started making a movie and all was well. I added a few more pictures and some sound and played it back. It plays so far and then the pictures break up into colors and then the screen turns green.  The sound continues.

    I am making a movie from still pictures. I used no theme and then started adding pictues. When I played it back, all was well. Then I added a few more pictures and some sound. When I play iot back it plays just so far and then the sound continues, but the screen turns green or the pictures break up into colors.

    Sorry, everyone.  I think I may have figured out what it was all down to...........
    I had left the IDE ribbon cable plugged into my third HDD, with the power cable unplugged.  I did this so as not to endanger my years of work on the third drive, until Windows had setup.  I have in the past, accidentally chosen the wrong partiton to format, so this seemed a good way to avoid it from then on.
    This was not a problem on my old system, but it seems this system doesn't like it.
    I must have left the drive completely unplugged, the times Windows did setup.  Amazing really.  I couldn't see the woods for the trees.
    Anyway, I'm sorry to have bothered everyone with my problem.
    Cheers
    Marcus
    edit :   Sorry Syar2003, I didn't see your reply until I had posted mine.  Many thanks for taking the time to try and help me, it seems as though I may have sorted it now.  I am using IDE drives until I can afford SATA.  But many thanks for the heads-up on the NF4-SATA compliance, I'll be sure to bare that in mind.
    I didn't actually check the NVRAID/IDE ROM version before updating the bios, so I have no idea if the revision was changed when Liveupdate flashed the Bios, I'm afraid.  I didn't know they would be updated at the same time.
    Again, cheers
    Marcus

  • Video keeps stopping, but sound continues

    Recording works fine, but when I try to play videos it keeps stopping but the sound continues. Tried som other programs from google play, and they work tiny bit better... they also stop (makes a loading sign), but also stops the sounds, before continuing after a second or two. But on a film lasting 1 minute it will stop more or less every 4 seconds for more "loading". I've had a Sony Xperia before where there never was a problem, but this on (got a new one last week) has had a problem right form the start. Any suggestions?

     Settings > apps > all > camera > clear data > restart the phone  record a new video BUT make sure to save the video on the internal storage and then try to play it  I've seen this before and it's a SD card issue. 

  • Videos start but stop although sound continues

    Videos will start along with sound but the video will stop although sound continues.If I move my pointer over the video it will jump to where the progress bar indicates where the video is at it's current playback time.How can I fix this problem?

    Let me revise this question.Same problem with YouTube vids on Facebook/YouTube ect as stated above with the problem being video hangups.If I wave my mouse pointer over the video in progress the video proceeds but will stop if I don't wave the pointer over the vid.The vid will load and I can hear audio playback but the image will just stop while the audio is still playing.

  • Video stopping on movies but sound continues !!

    Video keeps stopping but sound continues during movies

    I also had this happen last night around 8:30 or 9 CST.  Watching 2 different episodes of Dr Who resulted in multiple occasoins of the video just freezing and audio continuing.  Hitting menu and backing out of the show and back in solved it in most cases, but it seemed like it took a long time to resume.  I haven't tried it yet today, hopefully it was just a glich in apple's servers.  Everything else on my network seemed to be working fine.
    ATv 2 iOS v 7.02

  • TS3623 video is stopping but sound continues

    The video is stopping and the sound continues. 

    I had this happen last night also,  see my post here
    https://discussions.apple.com/thread/5390580?tstart=0

  • Skipping through youtube movies stops movie, sound continues[SOLVED]

    Dear Everyone,
    I've been having the following problem for a while:
    Whenever I try to watch a youtube-clip in flash format, and I try and skip forward, the image freezes, but the sound continues. This happens both in Chromium and Firefox. Is there someone who knows what's going on, and if there is some way to fix this?
    I currently have flashplugin-11.0.1.152-1 64-bit installed, and the nvidia-285.05.09-1 64-bit drivers for my video card.
    Thanks a lot!
    Linus
    Last edited by Apocalypse_666 (2011-10-29 12:48:38)

    Oh, well, I feel kinda silly now... I just remembered I had turned hardware acceleration on (by uncommenting the line in /etc/adobe/mms.config) and tried turning that off again, which seems to have solved the problem... Hope this might help someone else!
    Linus

  • How do I stop sound from playing when I leave frame?

    I have designed a website for an advertising agency using
    Flash and ActionScript 3. In the portfolio page, I have several TV
    commercials that are available to play. What I need is 1) when the
    user leaves the TV ad page, I want the tv commercial to quit
    playing (right now, it continues even though the user has moved on
    to other pages). and 2) If the user selects a different TV
    commercial without first stopping the original one, the sound for
    both of the them plays at the same time. I am using the flv
    playback component. The video appears to stop, but the sound
    doesn't. My TV commercials are external flv files.
    I have also made a page for radio ads and I just used play,
    pause and stop buttons to control the sound. This page does the
    same thing. The sound continues when you move on to another page in
    the site. My sound files are also all external sound files.
    All of my pages are just individual frames in a main
    timeline. Each page has a frame label.
    If this is not clear, here is the link to my site:
    http://www.hammockads.com
    I would appreciate any help anyone can give me with this. I
    have tried for weeks now, to solve this problem and I just don't
    know enough actionscript or flash to figure it out. I've only been
    working with this for a few months.

    I have my website set up so that the portfolio page occupies
    one frame of my timeline. Inside that frame, I have a movie clip
    which contains the additional pages of the portfolio section. The
    additional pages show examples of the print ads, radio ads, tv ads,
    web sites that my client has created. Each of these additional
    pages is also one frame of the timeline (this time inside the
    portfolio movie clip). When the user clicks a link in the website,
    it just takes them to another frame on my timeline.
    The entire website is one swf file and each of the pages is
    located on one frame of the timeline (either on the main timeline
    or inside a movie clip timeline.)
    In the tv ads page, I have a button for each of the tv
    commercials. When the user selects a specific commercial, then the
    actionscript calls that particular ad from an external flv file.
    The problem is that when the user clicks another button (to view
    another ad or chooses to go to another page in the website (which
    involves leaving the current frame in the timeline) the video or
    radio ad doesn't automatically stop playing.
    I can't really post code, because I'm not sure what code to
    post. The TV ads are currently set up using the FLV playback
    feature. The radio ads are set up with play, stop, pause and volume
    control buttons. When a user here selects a new radio ad, the one
    currently playing stops and the new one starts, but when the user
    chooses to go to another page without first stopping the ad from
    playing, it continues to play.
    On the TV ads page, nothing is really working except that the
    ad plays and stops when it comes to the end. I'm thinking that I
    may need to go back and re-code the TV ads to play without using
    the flv playback option.
    Any thoughts? I hope this is a little bit clearer.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • When I leave a feed from watching a video on Facebook the sound continues to play. Even if I leave Facebook and come later the sound returns

    VVideo sound continues to play on Facebook when I leave that feed.. Even if i leave Facebook and return

    Having this problem too.
    I Have to close the Facebook app to stop it.
    ANy ideas anyone?

  • AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

    I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
    Audio breaks/stops and continue playing randomly when 'Ram Previewing'
    It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
    Steps to reproduce BUG / issue:
    1. create a new composition with a length of for example 5 minutes.
    2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
    3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
    4. insert the wave file in the earlier created composition which contain the animated solid or video file.
    5. Set the work area bar (preview range) for the whole composition.
    'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
    AE has to stop rendering because there is no more space available in RAM.
    make sure 'from current time' checkbox is off.
    6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
    7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
    (less then the green cache indicator on the right side)
    8. "Purge image caches" or "Purge All"
    9. Ram preview the now smaller work area
    10. listen to the audio. The audio breaks are gone! (***Workaround***)
    Additional information:
    I have the latest After Effects CS5 update installed (10.0.1.19)
    This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver,  ASIO DirectX Full Duplex Driver)
    I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
    Reducing the amount of RAM which After Effects can access didn't solve the problem!
    System:
    Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
    There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
    I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
    I also turned off AVG Anitivirus and Windows firewall for testing without success.
    AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
    The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
    Any help would be nice!
    Felix

    Yep, I agree with craulmedia....
    It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
    The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
    CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
    I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
    I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
    I bumped up this post 2 times and thanks to craulmedia for the third time.
    And now here is my fourth time *BUMP*
    All I got so far is: "I saw your bug report it's in the queue"
    Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
    OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
    But it started out so good in the first time...
    Last 2 things I want to add here:
    1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
    2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

  • Is it possible to stop the continual redraw

    Hi I was wondering if it was possible to stop Lightroom continually redrawing images, especially when switching to Develop mode.
    I have tried rebuilding all the 1:1 Previews - this seems to help the redraw problem in Library mode - both for thumbs and when double clicked - but not in Develop mode.
    It doesn't seem to make sense that when I select a photo in the Library thumbs mode, then hit D (for Develop), I see the photo enlarged and clear for a split second, then Lightroom starts to redraw it, and eventually produces the image I saw for a split second. It's like it has the information but doesn't use it. This sometimes happens when in "Fit" view, especially with heavily cropped photos, and nearly always seems to happen in "1:1" view.
    I have also tried optimising catalogs - this seems to make little or no difference.
    Computer setup: early Intel iMac Lightroom 2.2, OS 10.5.6, photos on external drive, catalogue on iMac, Canon Raw files (.CR2) about 20 to 30 Mb each,
    LR Preferences:
    file extension:dng, jpeg preview:medium size, compressed (lossless) ticked, embed original raw file not ticked, Cache on imac, max size 12 Gb (should this be bigger maybe?).
    Catalogue settings: Standard Preview size: 1680 pixels, Preview Quality: High, Automatically Discard 1:1 Previews: after 30 days.
    Many thanks for any help with this

    Well thanks for the quick answers! At least I won't be wondering if there's some setting I can change.
    Of course I understand why the image should show changes made in Develop mode in "real-time" - and, in fact, that works fine with no delay, if I increase the contrast, for example.
    What I don't undestand is why without making any changes, on opening the picture in Develop, it shows the picture, then it goes all blocky ("big pixels") for a few seconds, then it goes back to normal

  • Can I stop the continuous saving of Pages document?

    Can I stop the continuous saving of Pages (iwork) document? I am currently working on a large Pages document - a school handbook that is topping 500mb due to the photographs. On a Macbook Pro I7 with SSD drive the continuous saving of the document when I do the slightest change is driving me to distraction - I have no idea what it would be like with non-SSD! It takes around 30 seconds each time I move a single photograph. Can I stop this versioning that Pages does?
    Thanks

    Your problem is not linked to versioning but to AutoSave.
    Autosave try to save every change when we leave the app "unoccupied" for a short time and, if we don't, it force save on a regular basis. It's this feature which is at work in what you describe.
    By default, Versions apply once an hour or when you force it pressing cmd + s so it's not it which is at work.
    My own tip when I want to edit a large file is to rename it from azerty.pages into azerty.template.
    This way, when I start a session upon this doc, I don't work on a document which was already saved once, I work on one which was never saved so, Autosave doesn't apply.
    CAUTION: this feature is killed after the first save process.
    Happily, there is an answer :
    Use my script Save_As (thanks to FastScripts I gave it the shortcut cmd+shift+s) or use it encapsulated in a Service by Peggy.
    This script trigger File > Duplicate
    then File > Save…
    This way it allow us to keep consecutive files storing the contents of our work in progress but the document upon which we work remains unsaved so free of AutoSave feature.
    We retrieve what we were doing under 10.6.8.
    To be able to work a more comfortable way, we will have to wait the delivery of the next upgrade which, I guess, will be iCloud aware which require deep changes in the app design so that it will be able to save the documents by small blocks as was explained during the late WWDC seminars.
    Now, I will give a less technical advice :
    I'm quite sure that on the long run, it would be better to replace your larges picture files by smaller ones fitting the true requirements. Inserting files with a rez greater than 300 dpis in the printed size is counterproductive. As you see, I add my vote to fruhulda's one. She was also perfectly right when she urged you to crop your pictures out of Pages. This one doesn't crop the pictures, it put a mask hiding what you wan't to drop.
    It's fine to build quickly a draft of a document but for the final work, it's better to prepare the pictures with a dedicated application.
    Yvan KOENIG (VALLAURIS, France) jeudi 17 novembre 2011 21:03:46
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?

    Are the songs playing whole in iTunes? if not download them again.
    else read this Apple Support Article on your problem
    Have a nice day!

  • Connecting a macbook to a tv:  correct cables, still no picture or sound

    I have the correct cables connected securely and I have no picture or sound displaying on the tv.  The mac screen "blinks" once when I unplug the adapter, so it is aware that it is connected to something.
    Current setup:  2010 13" Macbook--> Mini DisplayPort to VGA adapter --> VGA Display cable --> Toshiba TV. 
    Also:  Macbook--> Stereo Mini to RCA Y Cable --> TV.
    If I hit system pref--> displays --> detect displays, nothing happens.  The tv is showing its default "I have no dvd in me so I will do nothing" screen.  I have tried changing the channel and input on the tv, restarting my computer, turning the TV on/off, unpluging and repluging cables, all to no avail.  The tv plays dvds just fine and is otherwise in working order as far as I know.  What's wrong here?

    Input button already tried.  It doesn't do anything.
    New thing:  a display icon has now appeared on the top of the screen.  I selected "turn on mirroring" which my television has blatantly ignored.  No progress.
    Also:  guy at Best Buy seemed pretty sure that the RCA cable mentioned previously would do the job for sound, not that that is working either.

Maybe you are looking for