Picture Tasks / Export to slide show -All gone for a Toss..Bad Adobe

In the older versions, there was a picture tasks menu, which allowed be to export the pictures to a slide show with music.Thats option is gone now in Acrobat professional 8 / 8.1.
Why Adobe is degrading its products!!! I regret purchasing the new version...
is there any way to do this?
I covert all my jpegs to a single pdf & then export it to a slide show...
Now I'm struck after upgrading to the new version..
if this option is not there..I'm sure I'm going to return the product ( creative suite)

It sounds like you may have had a plug-in that did the extra things you are talking about. You can make a slide show with transitions and all, but it takes time is not a simply menu item. You can set the timing for each slide or the timing as a whole. Adding music is an additional step. All of this can be done in Acrobat, but the automated aspect you mention is not part of Acrobat. Again, you may have used a plug-in that did it all for you. You might check PlanetPDF or the PDFZone to see if there are such plug-ins available.

Similar Messages

Hello! pleas help me ;) Question: how to export Project (slide show) from Iphoto (iphone) to desktop (windows)? Second - I export Procejct to Icloud - where I find this?

Hello!
Pleas help me!
Problem: How to export Project (slide show) from IPhoto (Iphone) to other computer with windows?
Second: How to save this project in Iphone?
Next: I export this Project to ICloud. Where I will find this?
regards
Jerry

Hi jerryj69,
Welcome to the Support Communities!
The link below to the iPhoto for iOS manual covers many of these topics.
iPhoto Help: Ways to share photos
http://help.apple.com/iphoto/iphone/2.0/#blnk7d8f763e
Ways to share photos
Using iPhoto on your device, you can share your photos in many ways:
Send photos to other devices
Beam photos, albums, events, journals, and slideshows (send wirelessly) from your device to another iOS device with iPhoto installed. Beaming shares photos in full resolution.
If you have a device that supports AirDrop, you can send photos wirelessly to other iOS devices that use AirDrop. You can use AirDrop to share photos, albums, events, journals, and slideshows. AirDrop shares photos in full resolution.
If you have an iCloud account and you’ve set up My Photo Stream, photos you save to the Camera Roll are sent to all of your devices.
Use photos in other apps on your device
Send your photos to other apps installed on your device, including iMovie and other iPhoto-supported apps.
Use your photos in any app by saving them to the Camera Roll.
Send photos to your computer
Import photos directly into iPhoto or Aperture on your computer.
Save photos to your computer using iTunes.
Share photos on the web
Post photos to your Twitter, Flickr, or Facebook accounts directly from iPhoto. You can add comments when you post photos using iPhoto.
Create a web journal with your photos and publish your journal as a webpage using your iCloud account.
Create a slideshow with your photos and publish your sllideshow as a webpage using your iCloud account.
Email, display, and print photos
Send an email with your photos.
Share photos using the Messages app on your device.
Present your photos as a slideshow with music and transition effects.
View photos on an external display using an HDMI cable adapter or on a TV using AirPlay and Apple TV.
Print photos from your device to a printer that supports AirPrint. Tap > Print and select a printer.
Create books of your photos and order professionally printed and bound copies of them.
Order professional-quality prints, and have them delivered to an address you specify.
Cheers,
- Judy

Adding pictures to an existing slide show

How can I add new pictures to an existing slide show. The site was created in Muse and uses their slide show module.

You can't. Iphoto plays the music track. It's it's 3 minutes long then it plays for 3 minutes.
So if you want to play segements you'll need to copy the track, duplicate it and edit it to the requied length
Or
Use an app that supports multiple audio tracks.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Exporting a Slide Show for YouTube

I've exported a slide via QUICKTIME. It looks fine when I play it but after I upload it to YouTube, some of the still images are scrambled. The still photos are completely damaged. It's hard to describe but the images not recoginizable at all. They consist of scrambled glitches, if that makes sense.
What is best codec, format, etc for exporting a slide show, and for you youtube.
the YT site was not very helpful.
thanks
Scott

I'd first export a self-contained movie (File->Export->QuickTime Movie) and see if that plays OK in QuickTime Player. If it does, then convert it to H.264 for uploading to youtube.
If it doesn't play OK in QuickTime, post the Sequence settings you're using in FCE for that project.
-DH

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

I created a slide show in imovie for my daughters 21st with voice overs from friends and family which was all working fine but now the voice recordings are not playing at all. Obviously some setting has changed but I can't find which one.

How can I get a clearer Movie for my web page when trying to export a slide show in iPhoto.

In iPhoto I am exporting a slide show in the display (size) 1280x800, the original images in the slide show are 600 dpi @ 11" x 8.96". I am using iPhoto 11 Version 9.4.2 on my MacBook Pro OSX version 10.8.2. I am using a wipe transition with a total slide show length of about 17 minutes long with about 96 images. The Display.m4v is 543.8 MB. The slide show is crystal clear when played before downloading to a movie, but once it is in a movie format it is no longer clear. What else can I tell you?

600 dpi @ 11" x 8.96"
600 x 11 = 66,000 pixels and you're reducing them to 1280...
What happens if you export without the wipe?

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I use lion 10.7.2 and iPhoto latest version but when I export a slide show when I play it . It plays about half of the slide show and screen become white ? How can I solve it ? Is it bug or my computer problem

I would also like to know the answer to this. I am having the exact same problem.

An error occurred while exporting the slide show

This error has been talked about ever since iPhoto 5. It is usually rectified by having a Movies folder in the home directory.
I have iPhoto 6.06 and am trying to export into iMovie 6.03. The exporting process goes through its paces but produces the error at the end. I do have a Movies folder in my home directory; the exporting process does even create a file called .mov in the Movies folder, and if I try to export again with the same file name it claims that the file exists, and do I want to replace it? Yet, Quicktime Player 7.4.5 cannot open it and claims that it is not a movie file. What is going on here? ANy help very appreciated.

Hi Terence,
thanks for the fast turnaround. I had already trashed the com.apple.iPhoto.plist file several times before. I don't think the problem is with Quicktime, since the error message occurs in iPhoto. I checked Permissions; there were a few problems with Flash, which I corrected, but nothing with iPhoto or Quicktime. I tried exporting the slide show again and got this in the Console Log:
Permissions repair complete
The privileges have been verified or repaired on the selected volume
slideshow max texture size 1536
2008-05-26 19:40:32.746 iPhoto[275] Slideshow movie export failed with error code -47."
Unfortunately my MacBook is a work machine and I am not its administrator, so Icannot create a new account. This will have to wait until I get back into Uni this week.
By the way, iDVD imports the slide show correctly, but as far as I know I then cannot add commentary to it. That's why I want to go through iMovie, so that I can record my own voice commentary before it goes into iDVD.
If you have any more ideas let me know. Otherwise I'll see my administrator in the next days and hand the problem to her. I'll let you know th outcome then.
Matt

How do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

how do I create a slide show from iphoto and export/send slide show within an email/, how do I create a slide show from iphoto and export/send slide show within an email/

You don't.
Slideshows are exported as movies and these are very large files. Email is not an appropriate medium for very large files as they can cause immense issues for the receiver.
Better to share some other way.
Regards
TD

Export indesign slide show as swf/pdf

Hello,
I try to export a slide-show containing buttons and flv-movies as pdf and as swf.
SWF-export:
In the exported swf file when viewed with the Firefox browser (Flash Player 16 installed) the movies disappear when I try to play them. However everything else including the buttons do work fine. The same problem I have with other browsers (Internet Explorer, Opera) as well as the “Standalone Flash Player” and the freely available “SWF Player 2.6”. Only when I play the swf-file with “Adobe Flash Player 11.2 r202” (outside the browser) the movies are streamed when clicked on. However here the movie frame has not the correct size and is moved to the upper left corner.
PDF-export:
When exporting the same indesign file as PDF and viewed via Adobe Acrobat Pro (Version 10.1.13) the buttons to switch to previous or next page do work fine. Also the movies are streamed when clicked on. However now the buttons to switch to next or previous status of multistate objects do not work.
System specifications: Indesign CS6, 64bit, Windows 7
Thank you for any suggestion,
Finn

Bob, here are statistics from Adobe's Flash Product page
• More than 500 million devices are addressable today with Flash technology, and it is projected there will be over 1 billion addressable devices by the end of 2015.
• More than 20,000 apps in mobile markets, like the Apple App Store and Google Play, are built using Flash technology.
• 24 of the top 25 Facebook games are built using Flash technology. The top 9 Flash technology enabled games in China generate over US $70 million a month.
• More than 400 million connected desktops update to the new version of Flash Player within six weeks of release.
• More than three million developers use the Adobe Flash technology to create engaging interactive and animated web content.

Can't export a slide show

-iPhoto 11'-
Hello. I want export my slide show (+/- 140 photo and music). So I click "export" and I select "Screen". I read the slide show will mesure +/- 390 Mb.
But when I confim, a box say me that i need 5GB ?? What's the problem?

Okay, I have exported on my HD...
Size is 146Méga (good)
But I lost 5GB: I had 41 and now, just 36! I don't undersand ...

When i go into finder click on pictures why dose it not show all photos just lets me open iphoto

when i go into finder click on pictures why dose it not show all photos just lets me open iphoto

Ralph9430 offers a good suggestion. But you may need to do this before taking his advice:
Check in iPhoto's Preferences (which you can open from the iPhoto menu). Look in General, and make sure "Connecting Camera Opens" is set to "Image Capture").
If it is set to "iPhoto", you won't be able to get to Image Capture easily.

Exporting aperture slide show

Trying unsuccessfully to export a large slide show 435 scanned slides to an external drive at approx 50% I get error message Unable to export Slideshow " A volume could not be found"
Any suggestions

When you exported your slide show what option did you select, when you view it on your computer what app are you using to view the slide show. Try importing it into iTunes if you have not done that then try to watch it via Apple TV, Or you can make a DVD or the show in iDVD.

Screen or Report that shows all Responsibilities for Org Unit

How can we find out in Oracle application from the front end,,,, the screens... or may be report that shows all responsibilities for ORG Unit ‘Vision Operation’ (204).
SELECT FR.RESPONSIBILITY_NAME, FPOV.PROFILE_OPTION_VALUE ORGID, NAME ORG_NAME
FROM FND_PROFILE_OPTIONS FPO,
FND_PROFILE_OPTION_VALUES FPOV,
FND_RESPONSIBILITY_TL FR,
HR_ALL_ORGANIZATION_UNITS HOU
--HR_OPERATING_UNITS HOU
WHERE --UPPER (FPO.PROFILE_OPTION_NAME) LIKE UPPER ('MO%OPERATIN%')
PROFILE_OPTION_NAME = 'ORG_ID'
AND FPO.PROFILE_OPTION_ID = FPOV.PROFILE_OPTION_ID
AND FPOV.LEVEL_VALUE = FR.RESPONSIBILITY_ID
AND HOU.ORGANIZATION_ID = FPOV.PROFILE_OPTION_VALUE
the above query displays the data from the backend,,I want to see how to see that data from the front end,, does anyone know the navigation, thank you so much in advance.

Hello Kashif,
Thank you for the reply. So, there is no screen that shows all the responsibilities that are assigned to a operating unit.
The link that you provided really did not give any information that i was looking for.
And as you said .. "there is no specific screen to show all except responsibilities form".... what does the responsibilities form show,
I have also tried to look in the System Administrator -> Profile -> System
and in the Responsibility, I query for Payables manager, and look which Orgs are assigned to it, I am not able to find it. I know I am wrong, but can you please help me how to see which responsiblity is assigned to which Operating Unit.
Thank you

The fax confirmation report shows all zeros for officejet 6600 printer

the fax confirmation page shows all zeors for date and time. How do I set the printer so it prints the correct date and time?

Hi CJChristian,
Welcome to the HP Forums!
I understand that your confirmation date and time fields are all zeroes with your HP Officejet 6600, and I am happy to help you!
Please take a look through this guide. Setting Up the Printer Hardware for HP Officejet 6600 and 6700 Premium H711n e-All-in-One Printers. Select the Officejet 6600, and look for Step Seven Set the Date and time.
Also this guide may help too. Setting up the HP All-in-One to Send and Receive Faxes.
Hope these guides are useful for you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Picture Tasks / Export to slide show -All gone for a Toss..Bad Adobe

Similar Messages

Maybe you are looking for