Picture Text Error Message
So with recieving some of my picture texts now i am getting an error message that states the following "One or more of the message components have been deleted by MMS Adaptation. Either the message was too large or the components were unsuitable for your handset" is this a carrier issue or a software issue? I am using an iPhone 5 with the 7.1 OS, thanks!
diesel vdub wrote:
SMS and MMS are carrier features, contact the carrier to troubleshoot.
Ok thanks will do...someone told me to try adjusting "mms max messaging size" do you know anything about that?
Similar Messages
-
Cannot download pictures get error message
when trying to download pictures I get an error message. The Ipod "bill's ipod" cannot be updated. The disk could not be read from or written to. Am i doing something wrong or is there somethig wrong with my ipod?
It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT -
Picture & Slideshow error message...
www.wrdinc.net or web.mac.com/wrdinc
i have several pages of pictures on my iWeb site. on most of the pages ("captured" "europe circa 2002" "the empire state") the pictures and slideshows display normally. On one page ("the happiest place on earth")however the slideshow features gives an error message. The pictures display fine on the page itself but an error occurs when i click on the thumbnails for a bigger view. i get the same error message when i try to launch the slideshow in the galleries within the "happiest place on earth" gallery.
ive tried to "publish all" to solve the problem but that didnt work.
***?I'm thinking that it might have something to do with your naming scheme for your photo pages. I notice that you have named all of your photo pages with smart quotes around them, and I'm wondering if this might be part of the problem. I know that apostrophes in the page names can cause the slideshows to not function.
Of course, the rest of your photo pages are named similarly as well, with the smart quotes. At least give this a try...either take the quotes off the non-functioning pages or disable the smart-quote function in the iWeb preferences panel (this will disable the smart quotes for your entire site and leave regular quotation marks).
But your slideshows are uploaded just fine. I think the javascript that launches the slideshow function is confused by all the punctuation...
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-Everyday%20Disneyland_files/slideshow. html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-50%20Years%20of%20Magic_files/slidesho w.html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-World%20Premiere_files/slideshow.html
http://web.mac.com/wrdinc/iWeb/WRDinc/%20-CHOC%20Walk%20%2706_files/slideshow.ht ml
If you wanted to, you could just replace the "Start Slideshow" hyperlink with the ones above...(you'd have to copy and paste the icon graphic and attach the hyperlink yourself). But if I were you, I'd figure out what is causing this and try to fix it so that iWeb can keep doing the work for you. -
Hi, just got a iphone 4 last week and starting to discover all the different features. I have a text problem starting today I can't seem to resolve. My text messaging has been working fine I have to say. Then this morning I sent a text to an international phone number that turn out to be wrong number. First nothing happened. Then 5 hours later I received a reply telling me the phone number is incorrect. Ok, fine. But wait, after that I keep receiving the same exact error message, about every five minute. I went I deleted the original text message by going into edit and removing the whole post. Not so lucky, I still keep receiving the error sms. I am afraid this is going to go on and on, all night and day. Does anyone knows what I can do to make it stop?
Well there is no table available in the oracle to see such. However, for UNIX flavour in the rdbms directory (I guess) you have a flat file called oraus whch contains all ora errors messages. For NT(WINDOWS) system, you need to write a procesure using error code I believe. I had seen this in the asktom site. Search, you may get it.
Jaffar -
Error message titled "Internal Server Error". Unable to download screen shot, which is a small file, but .tiff.
Any recommendations on the basis of this very minimal info?
RPBHello,
Yes a screenshot will be helpful. The format needs to be either JPG or PNG to upload to the forums. You can use the Preview app (How to post a screenshot in the forum) to take the screenshot and save it in JPG or PNG.
Maria -
Getting this message or a couple of my contacts, which have been texting OK , Have deleted them reentered with 10 digits nothing,
they can text me but I cannot respond to them - now in the middle of receiving info on a death in the family - started getting the same message, and
the day before all text's were going through fine. Have contacted carrier no one seems to know how to solve the problem. NOT A HAPPY CAMPER RIGHT NOW!First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Here is another strange error I just got:
What does this mean? It happened when I hit command-A when editing text. I can type, but just not select all.Did you happen to copy text from Illustrator to the clipboard and still have Illustrator open?Try quitting Illustrator.
Or try Edit > Purge > Clipboard and see if that helps. -
Creating TextFiled with Error Message inside catch block .
Hi ,
I have seen this example from the Adobe :
Here in this case Assume that an Exception is thrown inside the validate Method and it is caught in the catch Block .
public function SimpleError()
try
validate();
catch (error:Error)
var errorMessage:TextField = new TextField();
errorMessage.autoSize = TextFieldAutoSize.LEFT;
errorMessage.textColor = 0xFF0000;
errorMessage.text = error.message;
addChild(errorMessage);
Now can anybody please let me know to what container this TextFiled is added , and how this catch block can access that Container ??
Please help me in understanding this .Hi,
That code looks like it was written in a Component or the main Application. The addChild() method will add the TextField to the main app.
The code also looks like it is from an ActionScript only project, but will work the same in a Flex App (use a Label component instead).
The catch block is not special, the scope has access to it's containing class, which in this case is a DisplayObjectContainer at the least.
Mike -
I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share". Just purchased the iPhone 6 plus. Never had this issue with the 5. Is there something that I need to change in my settings?
I am unable to send pictures either by text or email. I will get an error message that states "Unable to Share". Just purchased the iPhone 6 plus. Never had this issue with the 5. Is there something that I need to change in my settings?
-
Error message when texting pictures
Just recently, whenever I try to text a picture, I receive an error message that it was not sent. Can you just a certain setting that I should look at?
Yes, check settings < messages< and make sure MMS is on.
-
When starting up Aperature 3 I get the following Error Message :
"There was an error opening the database for the library “~/Pictures/Aperture Trial Library.aplibrary”.
I can't di a thing except Quit. I have restored from Time Machine and reloaded the Software from Disk. Still get the same message. Any suggestions Are appreciated.
JimHello Jim,
I assume you trial Aperture Library is in your "Pictures" folder? Try to rename it to something like "OldApertureTrialLibrary.aplibrary", to force Aperture to create a new Application Library.
To rename the old Trial Library, select it in the Finder and enter Command(⌘)-I (short for File-> Get Info). Click on the file name text field and enter a new name.
Possibly you get this error message message, because there is some permissions problem. If you are not allowed to rename the file, click on the padlock in the lower right corner, authentificate as admin and give yourself read/write access to the trial library (in the "Sharing & Permissions" brick of the "Get Info" panel).
Post back, if your "ApertureTrialLibrary.aplibrary" contains valuable images that you would like to save or if this does not work and you need further advice.
Regards
Léonie -
How to send a picture text message
New to the iphone but was always able to send a picture text message to anyone including my verizon friends with a LG phone worked great. However with the new iphone I try to send a text message with a picture and nobody receives it. Then I get a reply back that the attachment has been removed??? I don't want it as an attachment but a simple picture msg.
So the question is how do I send a picture text message to another person's phone
ThanksThe easiest way is opening up a message to the desired person and hitting the camera icon to the left of the message bar, where you will be prompted to pick one from your camera roll or take a new one.
You can also choose a current picture from your roll and select "MMS" when pressing the new message icon (arrow and a rectangle) in the corner of the screen.
If neither of these ways are working, check settings > messages > and make sure "MMS Messaging" is enabled.
If you still receive this error double check your AT&T account to ensure that your plan allows for MMS messaging.
Message was edited by: Pracht -
I have an original Ipad, I tired to update it, but during the update it gave me an error message (1602) an now it just has a picture of itunes and a ubs cord? Please help!!
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
TestnTag wrote:
When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage. The destination device must be registered with the Apple servers by turning on iMessage. Therefore, the user with the iPhone must enable it for iMessage. -
Error message if invalid characters entered in PM order oper.short text fld
Hi ALL,
I need to display a error message, when user enters the invalid characters in work order operation short text field. The error message should be displayed during work order u201CSaveu201D (during creation and change mode).
Kindly let me know is there is any user exit / BADI can be used for this.
Note: I have checked some user exit, such as IWO10009 but I am not getting the value of Operation short text (AFVGD-LTXA1) to compare and throw the error message
Regards
Ramuhi
the exit is correct but don't use structure field,
follow this to get text
get AUFPL(Routing number of operations in the order)from CAUFV and paa it in AFVC -AUFPLyou get the short text
it can be usefull
-ashok
Maybe you are looking for
-
Uncaught Javascript Exception during create file phase of Merge to HDR Pro.
Provide a descriptive title that includes your OS information: I am trying to create an HDR file from several large merged panoramas, and everything seems to go very well whichever options I select until the point comes when photoshop tries to create
-
Connect Non-SAP Oracle db (32bit) in sql 2005 (64 bit) using linked server
Hi, I am connecting Oracle 10g database from SQL 2005 using linked server, in which i get the error "Cannot initialize the data source object of OLE DB provider "MSDAORA" for linked server "L2ORACLE". OLE DB provider "MSDAORA" for linked server "L2OR
-
Ix2-400d: ??? how to determine drive serial numbers (online)
Any chance to identify drive serial numbers ( drive 4 to 1 ) online from an ix4-300D cabinet ( 4x 1TB ) via GUI ??? Yes I can find out drive model and (sometimes) firmware level hovering over drive position on storage status. But I have found no way
-
OT...forum program has a glitch re: Last message link?
Everytime I click on the Last (message) link at the bottom of a page I get kicked out to a page with all the various Adobe product forums listed. Is it just me or is this happening to others? (Admins can delete this Subject if wanted)
-
Sorting Ability in web ui report
Hi, I need to add the sorting ability for every column in the result view of my web ui report. Please help me in achieving this? Regards, Kamesh