Picture / Video capturing problem with Nokia 5233

Hi All,
I am facing a problem when I capture a picture/video with my new Nokia 5233 phone I bought yesterday.
1. When I try to capture a video, nothing is visible on the phone screen. I click on Record button and the shooting starts and then I click on it again and it stops. But I when it tries save the video it gives an error "Unexpected error occurred. Please restart your phone".
2. I reboot the phone. But I face the same problem. I face the same problem while capturing pictures.
I have tried following as a measure to solve the problem but no success till now:
1. Reboot the phone: tried it more than 20 times. Does not work
2. Soft Restart: Removed the battery for 1 minute and powered the phone back. Does not work
3. Restore Factory Settings: Restored the phone to factory settings. Does not work.
4. I checked my firmware version. Its 12.1.089, RM-625. I think no firmware upgrade is available at present
Please advise what steps should I follow to cure the problem.
Please also let me know in case you are facing a similar problem with your device.
Thanks a lot in advance.
Solved!
Go to Solution.

Went to Nokia care. They took 10 days... but could not correct the problem...
Then again left it there for 7-8 days... finally got my phone replaced...

Similar Messages

Problem with Nokia Video Manager - No video, only ...

Hi all,
I have a problem with nokia video manager. I have been converting movies to mp4 and watching with my cell phone for a while now. But all the videos I have converted were less than 30 min. long.
When I tried to watch a video longer than 36 minutes, the picture froze some time around 36th minute and only the sound continued to play. I have tried several other videos with similar lenghts and all seem to freeze at the same exact point. The player continues to play the sound after picture freezes.
Could someone please help ???
Regards
/Cenk

Hi davidf
Thanks for the information,I must confess that I always use:
http://www.slysoft.com/en/clonedvd-mobile.html
when transferring movies to the N95, but that is just a personal choice!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Problems with Nokia Photos (Lifeblog)

I have been using Lifeblog 2.5 on my PC running on Windows XP sp2 for more than 2 years and was very pleased with how this software worked. I regularly used it to transfer both photos and videos from my N80 and N95 to my pc. When Lifeblog was premium software I paid for the full version.
I had a problem with my PC and had to perform a destructive recovery on the C drive of my pc. I then tried to download the Lifeblog program again from Nokia only to be met with a SORRY greeting. So i was able to find the Nokia Photos software which I downloaded and installed. I then imported my Back up files from Lifeblog.
The problem with Nokia Photos is Videos do not play. Only SMS and Photos can be viewed even though I have ticked all the boxes.
I think that Nokia must have some problems with Lifeblog and Nokia Photos. Any help as to how I may be able to get it to work as well as it was before would be greatly appreciated.
Adrian
Adrian Smith

I have since reinstalled all the XP framework software and it seems to work fine now.
Thanks for your advice.
Adrian
Adrian Smith

Capturing Problem with Sony TRV330

Capturing problem with Sony digital8 trv330.
I recently purchased the above camcorder from eBay for capturing old 8mm/Hi8 tapes for editing purpose. The camcorder set to A/V -> DV OUT connected with Firewire to my Power G4 and the Easy Setup was DV-NTSC. The playback on the capture window looks OK except there were no timecode in the Timecode Duration Field and the Current Timecode Field (both shown 00:00:00:00) during playback but there was timedoce in the camcorder viewfinder. When I click the Capture Now button, the capturing window show up with message “waiting for timecode ….”. I have to click “esc” to stop the capturing operation. I trash the Preferences and Ran the Disk Utility without success. I also tried the Easy Setup with DV-NTSC DV Converter as well as DV-NTSC 32Khz, nothing work.
My set up is: Mac Power G4 version 10.5.5/ F.C.E. 4.0.1/ QT7.5.5/ Startup 160 GB-89 GB available/ Scratch 350GB-277GB available. Folks, I need help. Thanks everybody.

Hi, I have a similar problem. I am trying to digitize my 8mm tapes (via firewire) using final cut express (4.0.1). Using easy setup I use DV-NTSC DV Converter and do capture now. I transfer the entire tape but notice the audio is out of synch with the video. This problem gets worse throughout the transfer process. When I use the esc to complete the transfer I get the error " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape....." So after searching around it is recommended I change the audio sample rate to 32 kHz option. However, when I do this using easy setup and picking DV-NTSC 32kHz I cannot use capture now because I have no timecode and so the window comes up with the message "waiting for timecode". Since there is no timecode this option does not work. Any suggestions? Thanks, Dan

USB 2.0 Video Capture Adapter with Audio

Hi
Can any one help, I would like to watch my security cameras on my G5 but I think I need a way of getting the pictures in, will a USB 2.0 Video Capture Adapter with Audio - that states Capture and Edit High Quality Video and Audio without Sound Card. I also have two programs called securityspy and camspinner-101. that I am told will work on a Mac?
Thanks
George

George Hilton-
Just out of curiosity how did you solve your issue?
-DaddyPaycheck

This is my problem with nokia 5800:

this is my problem with nokia 5800:
my phone is updated.
sorry my english isn't good
1. music player have too much problem and player hang too much,too much ,too much.and earased playlist and all songs in playlist and from music player then i should earase songs from my phone then retransfer to phone
2.music player sometimes hang at the end of song and I should restart my phone!!!
3.Oh INTERNET!often when I work with internet and click above a link phone hanging and restart browser and I huffy!!!
4.messageing has not recently use numbers and I should alwayes add my numbers from contacts but nokia java mobiles in part of "To" has recently used numbers shortcut!!!
5.when dialling a number and failed,I should heare the error trump for 7 second and don,t disconnect with any key!!!!
6.after i update my GPS some of entertainments isn,t in new version, such as take photo from map nad altimeter and ...!!!
7.photo camera has not sound off or intercept the voice!!!
8sometimes remot of player dosn't work and I should pause music then replay to work the remote
9.the camera has not 16:9 aspect ratio.but 5800's lcd is 16:9
10.Note applicatin has any shortcut for sorting notes
11.bluetooth should saved in phone memory and if memory be full or the shared file is longer than memory phone we can't save that on phone!!!
12.delivery report dosen't shown at inbux and I should that from Delivery report part and if number of messages is more than 20, we can't know delivery report!!!
13.

1.
2. Their different teams. As I said, this is not a big issue unless more people send emails to Nokia asking for it, and no, as far as I can see, only a minority cares for this issue. Nokia will not spend to develop something in an OS that only a few people care about.
5. Its an OS design. Either live with it or buy a new phone.
7. It seems you do not understand what "country dependent" means. It depends upon your country's rules and regulations if this is available, and if the majority of the countries in the world are making laws for the prohibition of silent cameras, Nokia cannot do anything about it. If they break this law, then that country will not allow Nokia phones to be sold in that country, which is bad for Nokia. Personally I dont understand why people want to remove shutter sound.
9. The setting to get 16:9 ratio is yes, software, but you also have to consider the sensor hardware. The sensor hardware is able to receive light in the same ratio as the pictures, and not in 16:9 ratio. Hardware cannot be adjusted. You yourself said you work with an SLR camera, and if you look through the viewfinder, you see that the camera lens sees the view in a "square" ratio as well like the phone. Creating software to render a picture in 16:9 ratio is just simply creating software that cuts off the reception of light in the top and bottom part of the picture so as to create a 16:9 effect. Meaning the camera is not utilizing the full 3.2 megapixels of the phone, and the result is just the same as getting the picture you took and editing it on your PC to show a 16:9 ratio.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Problem with Nokia Messaging on my N97 (V22)

Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?

millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it.

Litlle problem with nokia maps for 5800 xm

hi evryone,
i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
please help thank you

Hi,
When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

A problem with Nokia 5530 wirmware updating! Help!

Hi all,
I have meat the problem with Nokia 5530 firmware updating: updating allways finish with the message "Downloading of the variant package failed.Most probably there is non-commercial software in your device."
Is there any solution for that problem?
Thanks and regards,
Alexander

first its ok
then
translation:
For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
Nokia Software Updater has tried downloading the software, but this is failed 4 times.
Its posible that it can be caused by a bad, slow or instable internet connection.
This failure can also occur because we have maybe a problem with our servers.
try later again
i tried it on 2 PCs one with vista and one with XP plz help me
Message Edited by progunnl on 13-Mar-2009 02:50 PM

Hi i have problem with nokia E52 SL3 I can t unl...

if some can help me i have problem with NOKIA E52 SL3 SOFTWER ITS LOCK I BUY IN POLAND FROM ORANGE

@aleksandars
Welcome to the forum!
This remains an issue between you and your network provider Orange, a procedure in which Nokia has no involvement unfortunately.
Happy to have helped forum with a Support Ratio = 42.5

I have a problem with nokia c700 (forget the secur...

I have a problem with nokia c700 (forget the security code). I can't open my phone and can't check my imei... bored. Please help me restore my security code. Thank you so much.
Life is fun!

There is no other way than to get it reset thru' Nokia Care . A proof of ownership (Bill / Invoice) may be asked ...

Premiere Pro CS3 Capture Problem with Audio

Setup:
Premiere Pro 3.2.0
Video Capture Device: Blackmagic Design Intensity Pro capture card
Audio Capture Device: HT Omega Claro Plus XP
OS: Windows 7 Ultimate 64-Bit
I am able to capture video with Premiere with no issues. However, the audio does not get captured even though it is set to capture both audio and video. I am configured for ASIO capture and playback. Strange thing is that I can load Adobe Soundbooth and it will capture the audio just fine (from the same input stream as I'm trying to do with Premiere). What gives? I'm almost out of options.
From what I can see, when I hit F5 and go into capture mode, Premiere seems to insist that it must capture audio from the blackmagic design audio ports, and even though I have the audio explicitly setup for the Claro in audio hardware, if I go into the capture settings, it still is set on "Blackmagic Capture" as the capture format, and when I go to settings, I can pick the audio channels to capture, however.... I don't want to capture with the blackmagic for audio. The capture format MUST be "Blackmagic Capture" or else I can't capture the video. It still doesn't make sense though, since I have the audio hardware set for input from the claro ASIO. It shouldn't force Blackmagic audio.
Any ideas? Please help

Some additional information:
Sound card is a Claro Plus XT not XP. Used to typing XP heh
Also, the video capture works with the included blackmagic capture software, as well as freeware solutions like VirtualDub and a Japanese freeware program I use. I'm able to capture video and audio without issue on those. Just don't know why Premiere doesn't do it...

Regarding Video Capture Utility with Monitoring

Hi everyone,
I downloaded the "Video Capture Utility with Monitoring" example. i want to make a few changes to it.
Along with recording the video i want to capture images as well(from the video stream itself) at regular intervals of say 6 seconds.
This is where i found the Recording Video Utility example.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/JVidCap.htmlThis example uses a Processor, i tried to create a player object from media locator and then grab frames but it didnt work out.
Can anyone help? I am new to JMF.
Edited by: ashish.kumar.shah on Mar 28, 2009 10:06 PM

ashish.kumar.shah wrote:
Can anyone help? I am new to JMF.TBM and I developed some code a while back that does this...
[http://forums.sun.com/thread.jspa?messageID=10596692#10596692]

Problems with NOKIA STORE on N8

i have problems with nokia store on my nokia n8...some applicaton i can instal, but some of then i can't...i start to download and then when it is downloaded, start to instal and sad: "UNABLE TO COMPLETE INSTALLATION. DOWNLOAD FILE AGAIN." then again,again and again..i tried to hard reset, update software, everything..and there is still the problem...plz, help

Is there any particular app you are trying to install?
I downloaded Fmobi last night after using a free copy for ages.
It wouldn't install due to me having the 'old' installer still there.
Kept giving me the same notification you stated.
I found it by using the 'App Manager', deleted and the install went in straight away.
Jurassic Park, Sam Neill to Dickie Attenborough " Mr. Hammond, the phones are working !"
N8-00 Tesco UK 059C951, Lumia 920

Picture / Video capturing problem with Nokia 5233

Similar Messages

Maybe you are looking for