Picture viewer on my ipad cuts off tops of photo

How can I stop the tops of my pictures getting cut off

You're welcome. For future reference, you might want to spend a few minutes reading trhough the basics of the iPad. Here is a link to the IPad User's Guide. It could save you some time and frustration later. Certainly it doesn't answer all your questions, but it's a good start.

Similar Messages

Photosmart c4480 cutting off top of photos

hi, i bought this printer today and thought i would give it a test run on photos from a memory card on 6x4 paper but it keeps cutting the top of the photo off a little bit
am i doing something wrong? is there a way of stopping this happening?
thanks mandy

It has to do with how all the camera sensors are made.
You can't change the aspect ratio in the camera. You need to crop the photo using some sort of photo modification software. I think all the picture editors have a crop function. So, the picture is a 4x3 aspect ratio. You need to cut about 10-12% off the short dimension on the computer.
Of course, the dorky workaround is to always take pictures with about 5% of stuff you don't care about on the top and bottom of the picture. So, you zoom out a little, and, when you print the picture, it will crop stuff that's okay to crop. Of course, if the pictures are already taken, that doesn't work.
Sorry about the frustration!
Let me know how it goes!
CF
I work for HP and hope to make your day Sproutastic!

Hp envy 4502 cutting off tops of photos

When I try to print photos with my Envy 4502, the photos always are cut off at the top - anywhere from 3/4" to practically the entire photo. The results are never consistant as to how much of the photo is cut off, but it is ALWAYS cut off. I am using Corel Paint Shop Pro X6 (64-bit). I am using glossy photo paper (230gsm, 10 mil) and have tried custom setting the margins, which doesn't seem to have any affect. I set up the printer to photo paper, borderless off, and have tried using the best resolution and the normal resolution. Nothing seems to help. I am up to date with the driver and software for my printer and also for the Corel program. I sure hope you can help. I feel like I am wasting so much ink, which is so expensive that I can't afford to print out unacceptable prints.

Welcome , I would like to see if I can help you with printing your photos correctly. I was wondering, if you save the photo and open it with another program - does it print properly? When you explain the photo is cut-off, does it look like the photo is shifted, cropped or just missing? I found several documents that talk about the print settings, you could see if any have a setting you haven't tried yet;Print Photos Saved on Your Computer (Windows)Printing Documents (Windows)Printing and Changing Print Settings (Windows)Changing Print Settings in Windows 8Changing Default Print Settings Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Cutting off top of photo

I have created a movie and it is automatically cropping the photo when playing

Select the photo and then choose the Rotate, Crop, Ken Burns Tool. Choose Fit for no crop. (but will letterbox)

Pictures in e-mail are cut off on the right side.

some pictures in e-mail are cut off on the right side. When I zoom out the text gets smaller but the picture stays the same

Sounds like the webpage you are on isn't optimized for devices with touch screens. I would suggest attempting to use a different web browser such as atomic browser or any of the other ones in the App Store. Otherwise you may have to resort to using a Mac/PC to do your homework.

Playing slideshow on tv from ipad cutting off picture

I am connecting my ipad 2 to my TV with a RocketFish Composite adapter and trying to play a video slideshow on my TV. I am able to play the video/slideshow just fine, however both the top and bottom of the videos (and pictures) are being cut off by several inches. When played directly on my iPad the size is fine ( no cut offs). The videos were converted to Ipad compatable (.m4v) using Aimersoft Video Converter and the iPad presets. The resolutions of the videos are 720 x 480. The TV I am connecting to is 1080P LED TV. I have tried different aspect ratios in the TV's settings but there are not much to choose from and each setting changes the size of the video a little, but the amount being cut off from the top and bottom is consistent. What can i do to correct this problem. Also, I need this slideshow for a trade show I am in tomorrow afternoon, so a quick response would help a lot.
Another thing... In my research so far, I found that iPad 2 can mirror its display (meaning what you see on the iPad you see on the TV) onto the TV. But I cannot seem to get that to work either. I can only play videos and slideshows from the apps that allow you to. How do I go about mirroring my display to my TV? Does it only work with a HDMI connection?

Cmart1019-
What adapter are you using? I have the Digital AV Adapter that connects to the HDMI input of a small Vizio HDTV. It seems to work OK, and has stereo sound. My only problem has been the weight of the HDMI cable pulling the adapter out of the iPad.
Apple also sells VGA, Component and Composite adapters. I also have the VGA adapter which works on the HDTV and one LCD monitor. However it doesn't work on a couple of older monitors I tried. Also VGA is video only. You would need to run a separate cable for sound on the TV.
Fred

Printing cuts off top of heads

I use PSE4 on a WIN XP with all updates. I have a photo (originally 5x7) that I resized to 4x6. WHen I try printing it on my HP PHOTOSMART 7960 on 4x6 HP photo paper with tab the printer always cuts off the top of one head. I have tried sizing down the picture to 3.95 inches and then printing on 4x6 paper. I have tried everything else I can think of and it ALWAYS cuts off the top of their heads. WHen I print the photo with a different photo software the print comes out O.K.
What Am I not selecting, etc. to print the photo as what-you-see-is-is-what-you-get in PSE4?

I'm beginning to suspect the aspect ratio of this image isn't correct. Do this experiment and see what happens:
First, make a copy of the image file you're working on so you don't experiment on an original.
Have the copy open on your desktop (in Editor), then go to Image>Resize>Image Size. Make sure there is no checkmark next to Resample, and then start increasing (or decreasing) just the number in the resolution box until the dimensions of the image are just slightly over 4 X 6. Make sure it is 4.something by 6.something, though. Once you get to that point, click OK and accept the change.
With the resized image open on your desktop, select the Rectangular Marquee tool. Once you've selected it, choose "Fixed Size" in the tool's option bar and set the dimensions to 4 X 6. Use the tool and select a perfect 4 X 6 portion of the image, then do Image>Crop. Now try printing.
Most cameras do not produce an image file that can be reduced to a perfect sized print, so a little bit of cropping is usually required. I know that the images from my camera wind up coming closest to 6 X 4.5, so I always have to take off at least 1/2 inch on that dimension that has to be 4 inches.
I don't promise this will work, but I did notice that you said you did no cropping, and that could be the reason why you're not getting the print size you want.

Printing pdf files made from Filemaker docs on HP 7410 cuts off top margin

Just bought a MacBook Pro and jumped from Tiger to Snow Leopard.
Also bought FileMaker 10 replacing the FileMaker 8.5 I used up till the MacBook Pro purchase and system upgrade.
Still using the same HP 7410, but during installation, I think I remember upgrading the printer driver. At any rate, this HP Printer is now much more responsive. It was previously very slow.
When I now save documents printed as pdf's from filemaker (as I used to) and then try to print them on the HP 7410, they open fine in Preview showing the whole page with no text cut off. But when I press Print in preview and I get the HP driver preview of what will print as part of the print dialogue box, it shows the top margin of the page cut off (down to at least 1/2 ") and actually prints that way. Before the switch to Snow Leopard and the MacBook Pro, a top margin of 1/4 " worked fine and printed in pdf docs.
(top margins of 1/4" on Word & Excel documents I tested still seem to print fine)
I use the borderless printing work-around, but that seems inelegant. It also takes much, much............much longer to print when it's in that mode (even fast draft).
Why is this happening?
Is there a setting I am missing?
Can this be fixed?
Steve

What print driver are you using?
I set my printer to use the open source Gutenprint driver in place of the one supplied with my printer to resolve an issue I was having - see my post http://discussions.apple.com/thread.jspa?threadID=1626340&tstart=0
The Gutenprint home page is http://gutenprint.sourceforge.net/index.php3
Message was edited by: another_steve

IPhone Cuts off Full Screen Photos in Contact View

The iPhone can use a full screen photo of a contact (when a call is initiated), if the original is cropped in iPhoto as '2 x 3 (iPhone) / Portrait'. (To set up full screen view on the iPhone, the user must select a contact, tap the 'Edit' button, tap the contact photo, tap 'Edit Photo', tap 'Choose', then tap 'Done'.) However, the same photo is then cropped to a square shape when initially viewed in the Contact screen, often cutting off the person's forehead. A suggestion for improvement would be to have the iPhone use the square cropping settings of the original photo when it was added to Address Book (for initial Contact view), and then use the 2 x 3 settings when the call is initiated to have the photo fill the screen. Anyone have any workarounds?

Hello
I have updated my software recently and the full screen default for the web browser is very annoying and causing my phone to slow down badly.
Has anyone been able to turn the Full Screen web mode default off??
Or how do you delete a software update.
Thanks
Darren

Why does ipad cut off left side of page?

What do you do to see left side of page which is cut off?

If you have Zoom enabled, that could cut off the left side of the screen, but everything would appear very large on the screen as well.
Settings>General>Accessibility>Zoom>On. You want to turn it off. Double tap three fingers and drag to change Zoom. You can see the instructions below.
If that's not the problem - try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Clips cut off top?

When I drag my clips into the project area, it cut off some of the sides, particularly the top of people's heads.
Is there a way to make it so it won't do this?
Thanks,
Phil

Are the people horizontal in your clips? Only joking. Anyway, did you set the project properties correctly for your footage e.g. widescreen? File >project properties>aspect ratio.
If you think you did, go to preferences and under the browser tab do you have a tick next to "clips in events browser use project crop setting" ? Untick and try that.
Are you using stabilization?

Printing from LinuxMint-17 to HP7525 cuts-off top and bottom of pages, enforced 15mm margins

I am printing a page from my bank (Fidelity), but there is an enforced margin of 15mm at the top and the bottom of the printed page.
This cuts-off most of the form name at the top of the page and the most of the barcode at the bottom of the page.
I find I have to "take screenshot" and import into "gimp". Then crop the page and then print directly from "gimp" to print the entire form. I have tried to teach this to my wife, to no avail. I wish HP would fix the drivers to allow Linux to print inside the margins. There is no problem printing from Windoz XP, but that is using an old hard drive and the computer runs dog slow and is ready to die.
Again, HP please update the linux drivers so my brand new printer will work as it is supposed to.

Hi @Jimec ,
I have brought your issue to the appropriate team within HP. They will need to get information from you to look up your case details or serial number. Please look for a private message.
If you are unfamiliar with how the forum's private message capability works, you can learn about it here.
Thank you,
George
I work for HP

Printer cuts off top inch of page

When I print something off the internet, for instance my bill from my cable provider, the top one inch is cut off which may contain important infromation. Can I adjust something myself on the printer or do I need service?

Hi 454mom, Welcome to the HP Forums! Some questions for you: What Operating System are you using Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you print from another program? ie: NotePad (Windows) or TextEdit (Mac).Are you able to make copies with the printer? Copy Text or Mixed Documents. If you are using Windows please try our HP Print and Scan Doctor, and let me know what happens! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

HP4630 Cutting off top inch of page

Every time I print, the printer cuts off the top inch of the page. I tried running the HP Print and Scan Doctor with no luck. Any ideas how to fix this?

Hi 454mom, Welcome to the HP Forums! Some questions for you: What Operating System are you using Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.What happens when you print from another program? ie: NotePad (Windows) or TextEdit (Mac).Are you able to make copies with the printer? Copy Text or Mixed Documents. If you are using Windows please try our HP Print and Scan Doctor, and let me know what happens! Please see this post, Want Good Answers? Ask Good Questions, by , so you can get the most out of these forums. Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

In Design View horizontal pages are cut off to portrait dimensions. How to fix this?

I am trying to edit a form in livecycle designers "Design View" mode. Some pages are horizontal but they are displayed all in portrait mode, cutting off the right side of these horizontal pages so i can not see or edit them. Is there some way to fix it so I can see all of the page on these hoirzontal pages?

If you want fast and professional, spend the money for PVII's Pop-Menu Magic3. You won't regret the investment.
http://www.projectseven.com/products/menusystems/pmm3/index.htm
As it stands right now, your responsive-nav.css file is 404 not found on server. Personally, I wouldn't use Spry for anything. But that's your cross to bear.
Scroll down to the various media break points and add the code in bold red
/* Mobile Layout: 480px and below. */
.gridContainer {
width: 100%;
ul.MenuBarHorizontal {display:none}
/* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout. */
@media only screen and (min-width: 481px) {
.gridContainer {
ul.MenuBarHorizontal {display:block}
/* Desktop Layout: 769px to a max of 1232px. Inherits styles from: Mobile Layout and Tablet Layout. */
@media only screen and (min-width: 769px) {
.gridContainer {
ul.MenuBarHorizontal {display:block}
Nancy O.

Picture viewer on my ipad cuts off tops of photo

Similar Messages

Maybe you are looking for