Pictures are not visable after publishing

Pictures are visable in preview but not after publishing on 2 slides.  These slides are set up the same in the timeline as others that are visable. What am I doing wrong?

Yes thanks for your help.  In Properties box by visible was checked and the image was stacked correctly and sync was for the duration of the slide but the Fade in and out option was selected and the time settings were identical.  So basically the fade in at 0.5 sec was cancelled out by the fade out o.5 sec or set at the same time.  Thanks again for your help.
Maureen S. Wilson
Director, Training & Development
Frank D. Lanterman Regional Center
3303 Wilshire Blvd., Ste 700
Los Angeles, CA 90010
WK:   213.383.1300 X 4972
FAX: 213.639.1157
Direct Line: 213.252.4972

Similar Messages

  • Hyperlinks are not functioning after publishing

    I am running iWeb 3.0.4 and am publishing to my host site through GoDaddy.com. The hyperlinks work fine in iWeb itself, but after I publish the site and then go to the site to check it, some hyperlinks work, but most don't. It appears to be very random which hyperlinks are working and which are not. After Enabling hyperlinks in iWeb and checking the box Make hyperlinks active, I am choosing to Link to > One of my pages. All seems to be in order but again, after publishing the site, only some hyperlinks work but most do not. I have tried modifying little things in iWeb to see if it will help upon publishing - over and over and over again - but to no avail. I cannot stress how irritating this problem is, not getting the site to work after publishing!!! UGH!
    I've seen other posts regarding this issue and still have not found an applicable solution or at least one that is fixing my problem. Any other suggestions? Thank you.

    Thank you guys so much - specifically Old Toad, Cyclosaurus and Roddy - for helping me figure out what's wrong with my iWeb site! Just these little things you guys are suggesting are helping me slowly fix these subtle problems. I don't understand why these things that you guys are suggesting aren't explained somewhere in iWeb.
    Because of your help I have been able to most of the hyperlinks to work now, but still not all of them. Still seems like I have to do some tweeking and moving around some of the text. I can't believe how inaccurate and inefficient iWeb is!
    Anyway, Cyclosaurus - is there any way to shrink the size of the Canvas element so that I don't have to keep adjusting the text just to get the hyperlinks to work?
    Thanks again!!

  • Changes in Crystal reports are not reflecting after publishing

    Dear SDN Mates,
    We are facing problem with Crystal reports. After making the changes in the crystal reports, it is not reflecting in the portal after publishing. Still it is showing the older version of the report.
    Can anyone please help me on this.
    Thanks and Regards
    Arun S

    Hello Prathamesh,
    After publishing the report, we require some changes in the report and doing some modifications in crystal report and again we are publishing this report. After publishing the report for second time, those changes are not reflecting in the BOE portal.
    This is happening for all reports. Can you please suggest me on this.
    Thanks and regards
    Arun S

  • Pictures are not being delivered after saying delivered on iMessage.

    Pictures are not being delivered after saying delivered on iMessage.
    Txting through iMessage works fine. Pic's won't send.
    I turned on and off everything and did all the necessary trouble shooting.
    I'm on a Verizon 4S. and I'm sure Verizon has nothing to do with iMessage system, since it's on its on server.

    bump

  • User pictures are not shown when users are added to person field in custom list

    Hi,
    Recently we have migrated our intranet from SP2010 to SP2013. We upgraded User profile service application, My sites and Intranet site to new environment. We haven't upgraded sites to use SP 2013 templates due to some business decisions. Everything
    is working fine and as expected.
    There are few lists in our environment where we have added users in a persons fields and allowed to show their pictures with details along with name. these user pictures are not being shown on to the page. After looking in picture property I found that "white
    Space" in a picture library name is replace by %2520 instead of %20 (/user%2520photos/profile%2520pictures).
    I tried reproducing problem on a new team site with SP 2010 template and it is reproduced however it is not occurring for a team site with SP 2013 template.
    Any suggestions would be very helpful for resolving this issue. Thanks in advance.
    -Amol Meshe

    We are experiencing the same issue. We get a /User%2520Photos/Profile%2520Pictures/ path anytime we use the people picker field with the option to display picture or the picture and details option.
    EDIT: This is only a problem on the list view. If you open the display form the image shows just fine. I can't see any setting view Edit Page and updating the web part that contains the list data to correct this.
    Michael Allen (.NET and SharePoint 2010 Developer)

  • Top Nav buttons not working after publish, but works in app. WHY?

    I have tried to find out why these buttons will not work after publishing. They work fine while in the iWeb app, but not when publishing. I do not have any objects near the top nav buttons. The first site went off without a hitch
    <www.serenitycustompools.net> the second site began the problem with the last page, the nav buttons would not work. Now this 3rd site, none of the nav buttons at top will work after publish, but will work in app. Anyone else having the same probs? None of my pages have the same names or any punctuation marks, and they are simple one word named pages.
    mini intel   Mac OS X (10.4.9)  

    They all work for me, try clearing your browser cache or using another browser.

  • TS3274 When I take pictures with my ipad 4, the pictures are not saved to the ipad, or not anywhere I can find them?

    When I take a picture or video with my ipad, the pictures are not shown in the camera roll or anywhere else I can find them.  Can anyone help me?

    When you take a photo there will be a small icon of the photo in the lower right corner. If you touch that it should take you to the photo in the camera roll.
    If that isn't happening have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • I have loaded a catalog in a pdf form but some pictures are not visueble

    When I open the pdf than i see the catalog that i asked ,but some of the pictures are not see !The text is perfect but not all the pic's are there only the model you can see?

    Bring up the Activity window (Command+Option+A) for you site and check to see what files are missing and where they belong.  The URL for the missing files will tell  you what folder they should be in.
    Then publish you website to a folder on your hard drive and open it locally with your browser.  Check to verify all images and present and the site works as you want.  Then you can upload the missing files or folder containing the missing files or the eintire site folder to your GoDaddy account with Cyberduck.
    OT

  • After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    After updating my ipad through i tunes all my games are not opening, After updating my ipad through i tunes all my games are not opening

    This seems to be most common with lower resolution pictures.  You can go into settings > general > accessibility and turn reduce motion motion off and then try to rescale.  Or user a higher resolution picture, which works better with the new OS.

  • The MSS ECM FPM Steps are not working after the upgrade

    Hi all,
    The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
    On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
    But this functionality was working before the upgrade.
    Please let me know what should I do.
    Thanks,
    Sarayoodharan.K

    clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 -  Cleint should be 000

  • I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get into Word?

    I just purchased Export PDF, and when I use it, it opens them in WordPad (which I never use) instead of Word. Thus, the pictures are not there, and the fonts are changed. How do I get them imported into Word?

    Hi,
    I checked your account,your Export PDF subscription is in 'Pending' status.
    Once it gets confirmed you will be able to use it.
    Please let us know if you require further assistance.
    Regards,
    Florence

  • Can someone tell me how to find my photos?I backed up my iPhone but Photostream was not on.pictures are not on my laptop so where did they go?

    Can someone tell me how to find my photos?I backed up my iPhone but Photostream was not on.pictures are not on my laptop so where did they go?

    Welcome to the Apple Community.
    Backing up does not transfer your photos to your computer, if you don't want to enable photo stream, you will need to transfer your photos when your device is connected to your computer using iTunes.

  • My pictures are not showing up on my iphone 4s and i do not have icloud set up is there any way ro fix this?

    my pictures are not showing up on my iphone 4s and i do not have icloud set up is there any way ro fix this?

    Pictures from where?

  • My pictures are not showing up as icons in the library.

    My pictures are not showing up in the library as icons. They are still there, but I have to guess which one is which and when I click on one, I can see it.  This is only for the pics I have taken for the last few weeks.  My older pictures I can see as icons.  How can I fix this?

    Hi dlaporte73,
    Does removing and reinserting your battery help? Is this happening when your BlackBerry Torch smartphone is in portrait view or does it happen in landscape view also? This KB article may provide more information.  "Thumbnails appear blank in the picture viewer of the BlackBerry Torch smartphone" http://blackberry.com/btsc/KB23935
    Let me know if that helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.

    Why does iTunes freeze up for minutes at a time when modifying INFO (CMD-i) ?  My files are not corrupted after it is done like many other threads i have readed.  Sometimes it's changing the title of a movie or editing the season and episode number of a TV show ect.....

    Yup same here
    I am running the latest iTunes, the latest updates to the OS and on an iMac 3.4GHz Quad core i7 with 8GB of RAM and the music stored on local HDD.
    Still locks up iTunes for between 2 minutes up to 20 minutes.
    Really annoying.
    If you find a fix please, please let me know, I have just been throwing hardware at it with no joy at all

Maybe you are looking for

  • Writing validation rule

    Hi; I want to write a validation rule about Cost center and accounts. scenerio is; for dont post 730XXXXXXX account for cost center 1000.. go to GGB0 prerequisite => cost center ='1000' control =>  NOT account LİKE '730*' and GGB4 I active the this r

  • Configuration of a port in 6534

    If i congifure a port for write,will it remove the previous pattern from the port lines? 1.) I am using for writing in port configure, i am using port=0, port width=8, line direction map = 00001111, So it will configure lower four lines as output & u

  • Anyone having trouble with their icons after the 10.7.4 Lion update?

    I updated the software yesterday and now the icons for my apps are blank pages. What's going on?

  • Why can't I post on Facebook in notification center

    Hi all, The function to post on Facebook in Notification Center works when I just updated to 10.8.2. Right now I can still see Facebook notifications, but I'm not able to post status update by clicking on the "Click to Post" at the top of Notificatio

  • How to add application in Background app refresh list

    Hello, how can I add another application (for example Skype) in the list of Background app refresh? I have just 5 applications there. Is it even possible to add some more in this list? Thank You in advance for Your reply.