Pictures black when return to a viewed page.
After choosing a link from a Web page and viewing that link, I return to the previous page and all the pictures that were displayed on the page are black. Only way to show pictures again is to refresh the whole page. This issue started after the last update. I use a Note 3. What can be done to remedy this issue on my phone?
That's interesting, I noticed this problem recently too. I'm running an HTC One M8 on Android 4.4.2.
Similar Messages
-
Picture black when attempting to name faces
The faces manual tagging works quite well greater than 99% of the time. However, I will occasionally get a black screen where the picture should be when assigning names in some photos. In some cases I will still get the squares and spot to put the name which indicates that the photo is still there but just not showing. Not sure why it picks some photos and not other to do this with. For instance I have 4 photos of the same people taken in almost exactly the same pose over a 10 second period. They all look fine and I have been able to edit them for exposure etc, except for one that is black when I go to name the faces.
Any suggestions?Hi Gord -
I too experienced the occasional black picture. All my black pics were much smaller in size that the other pictures displayed. Most were existing photos that I had copied and then cropped to see a face better. It's like they are 'too small' to show with the other pictures. I'm sure there is some technical reason too...
It helped me to rename these black pictures with the faces in them so when they appeared 'below the line' when I was trying to match faces, I would know who was in the picture. I haven't a clue why iphoto 09 doesn't display the whole image.
Hope this was helpful or even answered your question. -
Why is the Photos app "flashing" when returning to the Albums page after viewing an album?
I go into the Photos app and then go to my albums. I can see all of my albums there and can tap to view any of them. When done, I can tap "Albums" in the upper left corner and it returns me to the albums page, no problem. However, if I "pinch" to exit the album, it returns me to the album pages...then briefly "flashes". It didn't do that before the iOS 8 update and the 8.0.2 fix didn't fix the problem. What gives?
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
Return to previously viewed page
I can link a word on an iBook page with a bookmark elsewhere in the iBook.
When the reader touches the word, the link takes him to the bookmark on another page elsewhere in the iBook.
What do I need to do as an iBook author to let the reader touch something on the page he was taken to that will take him back to the original page he left?it seems you answered your own question. make a word link to return the same way you made the one to go forward
When the reader touches the word, the link takes him to the bookmark on another page elsewhere in the iBook. -
Firefox wont retain the search when returning to the search page.
After I create a search and go to any available search link, the start page does not retain my original search information.
If the problem is that your Google results go blank when you go Back to them, some other users have this problem as well. See this thread for a workaround: https://support.mozilla.org/en-US/questions/970863?page=2#answer-485663
If that is not the problem, could you describe the steps you're using? For example: enter search on Firefox's built-in home page, get Google results, click through to a site, use the Back button to return to Google, use the Back button to return to Firefox's built-in home page -- and the search form is empty on Firefox's home page. -
Error when run crystal report viewer page
Hi I created form using vb 2008 contains crystalreportviewer and in load sub I wrote the following code to show the report:
Dim r_select As String
Dim MyReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
r_select = "Select Innovative_Form.* from Innovative_Form"
Dim da As OleDbDataAdapter = New OleDbDataAdapter(r_select, System.Configuration.ConfigurationManager.ConnectionStrings("ConnectionString").ToString())
Dim da33 As New System.Data.DataSet
da.Fill(da33, "DataTable1")
MyReport.Load(Server.MapPath("CrystalReport.rpt"))
MyReport.SetDataSource(da33)
Me.CrystalReportViewer1.ReportSource = MyReport
Me.CrystalReportViewer1.DisplayGroupTree = False
Me.CrystalReportViewer1.DataBind()
Me.CrystalReportViewer1.ShowFirstPage()
End Sub
when run I got the following error
Server Error in '/Innovation Last Version-10-1-10' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
Line 34:
Line 35:
Line 36: Dim da As OleDbDataAdapter = New OleDbDataAdapter(r_select, System.Configuration.ConfigurationManager.ConnectionStrings("ConnectionString").ToString())
Line 37:
Line 38:
Source File: C:\Users\kisruser\Desktop\PROJECTS\Innovate Project\Innovation Last Version-10-1-10\Report.aspx.vb Line: 36
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
Report.Page_Load(Object sender, EventArgs e) in C:\Users\kisruser\Desktop\PROJECTS\Innovate Project\Innovation Last Version-10-1-10\Report.aspx.vb:36
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.4200; ASP.NET Version:2.0.50727.4016
SO WHAT IS THE PROBLEM?????What version of CR are you using?
What CR updates are you using?
See sample apps here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
in particular check out vbnet_win_pass_dataset_main_sub.zip
The [Crystal Reports for Visual Studio 2005 Walkthroughs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23] will also be good to look at.
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup -
I have been using app for local news. It has worked fine until 2 days ago. Now,when I choose the app it looks as if it is loading then it blacks out and takes me back to the ipad screen where I chose the selection. I have uninstalled and reistalled app same problem. Any ideals? This app works on my iphone and by daughters ipod.
ThanksI also have the same problem with my downloaded apps not opening any more, simply closing immediately after I try to open them.
It seems this only happens to downloaded apps, not the built-in ones.
I have been advised to remove all my apps and reload, but I fear loosing my data.
I tried the 2 diff kinds of shutdown/reboots, but did not help. -
I like to edit my web pages easily,
- click to see html, edit it, (file name already there), save it
- hit restore on browser - see what I did -
Just changed from IE
which gave me NotePad, which is just fine for me
Just changed to FireFox
and it displays text in a non-editor,
can't edit and save easily
What to do??
Even worst - after installing FireFox
IE no longer clicks to NotePad
but that fancy non-editor :-(((ViewSourceWith: https://addons.mozilla.org/firefox/addon/394
See also:
http://kb.mozillazine.org/view_source.editor.external
http://kb.mozillazine.org/view_source.editor.path -
Photos in iMovie cropping when returning to project view.
Hi,
I'm using an iPad Mini with the latest iOS and latest version of iMovie.
I an importing an image of my company's logo to iMovie to use as the start of a movie.
The initial preview is fine, and the image centres.
Exiting the project and then re-entering makes the image 'zoom' in to a section and it is impossible to zoom out to the full image. iMovie effectively automatically crops them.
Please see below screenshot.
What is the issue/fix?I had a similar issue also, seems to have just started (maybe the new iOS?). I actually had 2 versions of a photo I wanted to use, 1 original and 1 that I had edited in the iOS photos application (I cropped it a bit). The one I edited worked just fine, the original one did not! So I just barely cropped the original one that was messed up, added it again to my project and that seemed to work fine. Maybe that will work of you as well?
-
When I return to the main browsing page after checking a site it would be great if the last place I checked would highlight on the main browsing page or have an indicator of some sort to let me know.
When returning to the Browsing page it is difficult to remember which link I clicked on and have to guess or start over again so can someone let me know how to do this if it can be done?
Can't remember but I think that you can do this with Internet Explorer.
Thank you.I am not sure exactly what you are trying to do but firefox calls favorites bookmarks, and has a variety of methods of making, sorting and displaying these, it also stores your 'history' and lets you see that or use it in the location bar search.
Have a look at some of the following
* [[Bookmarks]] <-- coloured text is a clickable link --
* [[Location bar autocomplete]]
*[[Browsing basics#w_retracing-your-steps]] <-- this is a long article it will scroll up and down once opened -
Using Firefox to search a web page.
When I click on a picture to enlarge it on a web page ( any webpage),a new blank page opens with nothing.It only says" search bookmarks and history".
What do I have to do to view an enlarged view ? What settings do i have to enable in firefox.
Any help would be appreciated
Colincolin30See:
* [[Images or animations do not show]]
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?
There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there? -
When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..
Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
why do the "SHOW THE PREVIOUS PAGE arrows not work on some websites such when I try yto return to a previous page the arrows at the top right of the page do not work instead they are light grey instead black and do nothing---this is frustrating to not be able to return to the page before--HELP
If a page you go to opens in a new tab, there is no 'back' to go to. If that is the case, just close the tab and you'll be at the page you came from.
-
Web pages are black when using Safari 4.0.3 on Windows 7
Web pages are black when using Safari 4.0.3 on Windows 7. It does not matter what page I try to view, all page are black. Sometime I can see pictures and white text box.
Screen capture:
http://users.jyu.fi/~ksalone/virhe/Safari403_Problem_onWin7.PNGHi and welcome....
Try deleting the temporary internet files (cache)
How to Delete the Contents of the Temporary Internet Files Folder
Carolyn
Maybe you are looking for
-
I need a new recovery disc for my MacBook help ASAP!!!
I need a new recovery disc for my MacBook so I can format and re-install the default operating system. I have lost the original recovery disc that came with my MacBook years ago. Can anybody tell me how and where I can order one from? Also, I do have
-
Display report : plan line items for internal orders
When running the report with KOBP tcode, although i have some plan cost line items in the order, i have the message : No plan line items were selected Message no. KB421 Could anyone advise? However, the report with KOB1 tcode works well and i have th
-
SSAS 2008, Process Old partition
Hi Experts , I need an advice and suggestion. I am working on SSAS 2008, I have One Fact Table "Fact_sales". I have done yearly partion, I.e FAct_Sales_2010 FAct_Sales_2011 FAct_Sales_2012 FAct_Sales_2013 Every Year I create One Partition. Now in Yea
-
how to transfer Ipad music NOT purchased from Apple to MacBook Air. Answers found in the Community does not seem to deal with similar questions posted to the Community.
-
Help, Authentication failed
I am having a very difficult time making a simple login program work I am using Java SDK 1.4.2_02 on a Windows 2000 host, the DS is on the same host My Directory Server is Sun One Directory Server 5.2 I am using the JAAS package, with a JndiLoginModu