Pictures come out with grey haze with flash, Pictures come out with grey haze with flash

When I use the flash on my iPhone 4s camera the picture comes out with grey haze and not clear

Is your iPhone white or black? The white ones are reported to have some issues like this with the flash because the colour white reflects light while black absorbs it - so I think the issue arises when you turn on the flash because it creates a ton of light that gets reflected back at the lens, which creates glare, which is probably what that haze is.
On a side note, I have a white iPhone 4S, and I had this problem with the camera flash but only when I had a case on the phone. When I took the case off, it was fine.

Similar Messages

When i take pictues with my 4s and the flash is on, the picture comes out with a blue tint.. can't figure out why.. no case or cover of any kind and it still happens

whenever I take pictures with my 4s and the flash is on the picture comes out with a blue tint.. I have a case but I took it off to test that theory and it still turns up blue.. I also don't have a protective film or anything over the camera..

I also have this problem with my recent 4s. Camera flash is bouncing back on its back pannel of the phone, apple did change my phone with a new one

When I take a picture with the flash on auto, I get a blue circle and no picture. When I turn the flash off the picture comes out fine. What do I do to take a pic in low light

When I take a picture with my iphone 4 and the flash is on I get a blue flash and a big blue screen with no pic. When I turn the flash off the pics come out
fine. I turn the flash on to take a pic in low light I just get a blue screen. How do I remedy this?

Try a reset or restart of the device.
If that doesn't work attempt a restore of the phone's iOS

Whenever I take pictures in a dark place with my iphone 4 the pictures come out with a purple haze. Why would this happen?

Whenever I take pictures in a dark place with my Iphone 4, the pictures come out with a purple haze. Why does this happen?

To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the camera. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support

Why do my pictures come out pink when I take a picture with the flash

Why do my pictures come out pink when I take a picture with the flash

If you got a cover for your iPhone then take it off. The flash reflect on the cover because the hole is too small

I have a white haze over photos when taking a picture with my flash

I have a white haze over photos when taking a picture with my flash. What can I do to fix it?

After the ios7 update, my wife's phone began having these same issues and we assumed it was a flaw with the update.
But after some trial and error, we concluded it was the illumination of the white plastic backing of the iPhone 4. We tried a different protective case, we blackened the apeture of the black case with a black sharpie, none of those things worked.
It was noted that the white and blurry photos only occurred with a case installed. Without a case, the photos were perfect. It is a *** issue.
Since we were using a case and appearance was not that big of an issue, I decided to apply a strip of black electrical tape with holes punched out for the camera and flash mechanisms and reapplied the protective case. This tacky fix solved 95% of the white blurry look to the flash photos.
So a work-around is to apply a non-transparent piece of tape, or sticker with appropiate sized holes for the camera lens and flash LED on the back of the white plastic phone case. It's tacky, it's a poor design from apple, but it works.

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

HT1600 turned my Apple TV on and get continuos flashing light, on my tv I get a picture of Apple TV unit with a cable coming out and a large iTunes icon

turned my Apple TV on and get continuos flashing light, on my tv I get a picture of Apple TV unit with a cable coming out and a large iTunes icon

http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

My macbook pro's sound is not working properly. It flashes from normal to grey in the menu bar up top, and when greyed out I cannot do anything with it, and it sits at max.

In system preferences > sound > output, it will switch from normal internal speakers > built-in, to headphones > built-in, to digital out > built-in, to headphones > headphone port, to digital out > headphone port- it's nuts! This is all without having anything actually plugged into the headphone jack. While it is greyed out (which happens randomly and on any of the settings), there is no sound whatsoever and it says, "The selected device has no output controls.". Also coinciding with this, my computer has begun to suddenly run extremely slow and lags a lot. Is there a way to fix this? I already tried updating my computer, and restarting it, and it didn't help. I'm wondering if maybe the headphone jack somehow was shorted while I had some speakers plugged in for gaming...? Or is this something I need to send my computer in to be repaired for?
It was custom-ordered a few years ago, and unfortunately the warranty has expired. :/ Perfect timing.

I have this same issue and have been struggling with it for a while. I really just need to get it into Apple Store to be fixed most likely - but avoiding the hassle and time needed to do so.
Things I've come across:
Something inside of the headphone jack is not right, such that it randomly thinks headphones or some other type of optical audio device are plugged in. you will see a red light inside the jack occasionally when it happens.
You might try doing PRAM and/or SMC reset ( http://support.apple.com/kb/HT3964 )

When I take a picture with my iPod touch 5G they do not come out as 4 inch pictures, how do I make it so the camera takes fitted pictures?

When I take a picture with my back camera the pictures have black bars on the top and bottom. They do not come out 4 inches. How do I fix this?

Because the screen aspect ratio is different that the camera aspect ratio. The only way it could fill the screen vertically would be either to stretch/distort the photos vertically or to cut off some of the photos on the sides.

I used a usb turntable to import old vinyl records into iTunes. Then with the cloud and iTunes match I put them on another Mac. The songs come up in the music list but they are greyed out. How do I get them recognized.

I used a usb turntable to import old vinyl records into iTunes. Then with the cloud and iTunes match I put them on another Mac. The songs come up in the music list but they are greyed out. How do I get them recognized. The symbol states the songs were downloaded from iCloud. I would like to get them to play so that I can make a playlist, and burn a CD.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

After creating a DVD with music, the pictures all come out fuzzy and not sharp. Why

After creating a DVD with music, the pictures all come out fuzzy and not sharp. I have tried all the options, and nothing works, they all come out fuzzy. I have wasted about a dozen DVD's

Have you tried enhancing and sharpening in Premiere Elements before burning to disk?
What steps are you doing exactly?

My ipad is frozen with a black screen with a picture of a cord leading to the itunes logo.i tried to shut it down and the app;e icon comes out but again the cord leading to the itunes icon keeps on coming out. what should i do ?

My ipad is frozen with a black screen with a picture of a cord leading to the itunes icon. i tried to shut down my ipad but the turn off icon wont show instead the itunes icon with the cord keeps coming out everytime i open my ipad. what should i do ? and i dont want to lose my pictures, videos and other documents in my ipad please help me ....

I hope you have a backup if you don't want to lose your iPad contents. You have to restore the iPad now using iTunes on your computer. That's what the message on the screen means.
Take a look at this.
http://support.apple.com/kb/ht1808

Why does a black and white picture come out with a tint? iPhoto, Canon

When I print a black and white picture from iPhoto, it comes out with a tint. How do I prevent that? iPhoto, Canon MX310

Hey neil293,
Thanks for the question. If I understand correctly, when you print a photo in iPhoto it has a tint. I would recommend that you read this article, this article explains how to adjust the tint in a photo.
iPhoto '11: Adjust exposure, contrast, colors, and other qualities
Thanks for using Apple Support Communities.
Have a good one,
Mario

Sometimes I take a photo on 4S and it comes out white with no picture.

Sometimes I take a photo from my 4S and even with removing the cover, the photo still appears blank - a white screen.
Anyone can advise why this is happening?

Hello rebeccay1,
Thanks for using Apple Support Communities.
It's hard to say exactly what is causing the issue without doing any troubleshooting. The article below has great troubleshooting steps to go through in order to resolve this issue.
Camera
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Take care,
Alex H.

Pictures come out with grey haze with flash, Pictures come out with grey haze with flash

Similar Messages

Maybe you are looking for