Pictures in iBook are partial/missing not displaying correctly

I downloaded new iBook called "Foundation" and the pictures are incomplete/partial/missing.  Tried deleting the book and re-downloading and still same problem.   Some pictures are complete, some partial and some just have a question mark inside a blue box (where the picture is supposed to be i am guessing).  There are also pages that have a large pink box that says ... "This page contains the following errors:  error on line 1 at column 1: Ending error.  Below is a rendering of the page up to the first error."    I could live without the pictures but this is an exercise book and the pictures are very important!            Any help is appreciated.

Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
This was not an isolated incident.
If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of  a fix that will allow the CC app to self-correct when the wifi signal is restored?
Any assistance will be appreciated! 
Thanks!
P.S. TypeKit troubleshooting doesn’t address this particular issue.

Similar Messages

  • Why are TypeKit fonts not displaying correctly in Pages (iWork)?

    I have just subscribed to TypeKit and am experiencing highly peculiar behavior from the two fonts I’m using in Pages (iWork): Basically, fonts in my document don’t respond appropriately to requested changes in style. For example, if I increase the point size by one point using the the formatting commands built into Pages, the font drops a point size. I’ve had the same experience using the kerning command, where the kerning decreases when I have set it to increase. (So far, the only fonts I’ve been using have been Futura PT and Proxima Nova.)
    Look at the example in the screenshot: “FEATURED EXPERT” on the top line shows in Pages as being 24pt Futura PT Book. However, “SOLO,” a few lines down, which is definitely displaying as smaller, shows as 25pt Futura PT
    In a potentially related issue, when I reopened this same document today, text boxes were suddenly too small for the text (again in Futura PT and Proxima Nova). It was as though Pages was suddenly reading those two fonts differently.
    I have had no issues with other (non-TypeKit) fonts in the same document.
    Anyone else experiencing anything similar? Any suggested fixes? I'm reluctant to unsync/resync the two affected fonts (the only ones I have sync'd to date) because I don't want to wreck the document!

    Thanks, Christopher. After I posted my original question, I did come to realize that it was Helvetica not Future PT showing. Here’s what happened, and here’s why I still need some guidance…
    The document dropped Future PT because when my wifi signal dropped, the Creative Cloud app displayed this error symbol (see graphic) in my menu bar.
    At that point, my computer could no longer access my TypeKit fonts and the document reverted to the system's Helvetica default.
    This was not an isolated incident.
    If I turn wifi off manually, there is no issue and CC continues to operate in the background as it should, with TypeKit fonts still available.
    However, if the wifi drops out on its own, I get the above error symbol and I then lose access to my TypeKit fonts. Very rarely, the CC app will self-correct when the signal is restored. More often than not, I must quit the CC app and relaunch it in order to get things back to normal.
    This doesn’t strike me as normal behavior Have you ever encountered anything like it? Do you know of  a fix that will allow the CC app to self-correct when the wifi signal is restored?
    Any assistance will be appreciated! 
    Thanks!
    P.S. TypeKit troubleshooting doesn’t address this particular issue.

  • ITunesU pages do not display correctly, theme colors are missing ?

    Our iTunesU pages do not display correctly, theme colors are missing ?

    Having the same problem with our iTunes U page.

  • Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

    Firefox display problems regarding this customers site:
    http://gardenia.dk/collections/collection/
    Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
    Can I do anything to make it work in Firefox, too?
    Kind regards,
    Annette

    This article might help you-
    https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Scientific fluorescence figures are not displayed correctly on iPad

    I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
    I am really disappointed. So, is there any solution?
    Many thanks.
    On MacBook Pro
    On iPad 1

    I am woundering if anyone can suggest any solution? Thank you.

  • Ibook g4 that does not  display the battery meter, sound volume, tim

    I have an ibook g4 that does not display the battery meter, sound volume, time & day.When i move cursor over the area where they should be I see a spinning beach ball beach ball

    Choose Go to Folder from the Finder's Go menu and enter ~/Library/Preferences/ as the folder's path. Locate the item named com.apple.systemuiserver with or without a plist at the end, and drag it to the desktop.
    (10471)

  • Umlauts are not displayed correctly in different programs

    Hello!
    I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
    I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
    Look at this example
    The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
    This is my locale
    locale
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
    Do you understand my problem? What can I do?
    Thanks!
    Last edited by cyberius (2011-02-19 10:12:19)

    Did you check the locale settings on your Windows machine?

  • Why are animated gifs not displaying animations in the preview?

    Why are animated gifs not displaying animations in the preview?
    My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
    I'm using Windows 7 32 bit
    My coworkers are using a mac.
    One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
    Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

    I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

  • Search for member activities - points are not displayed correctly

    Hi experts,
    I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
    Can anyone tell me why the points in the result list are not displayed correctly?
    Thanks and best regards
    Anne

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • Entity Descriptions are not displayed correctly in Combo box dropdown list

    In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
    Example:
    'Entity A. LTD' becomes 'LTD'
    'Entity B Inc.' becomes blank
    It seems that everything before the dot is not displayed when opening the combobox.
    It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
    Does anybody knows the sollution or have seen this issue before?

    Hi,
    This is a known issue with combo box list of values.
    Please follow this workaround:
    - Remove ComboboxLOV on Deptno
    - Create an updateable transient attribute(Say Dname) of type String
    - Define combobox lov with following values:
    List Data Source: DeptView1
    List Attribute: Dname
    List Return Values:
    Dname - Dname
    Deptno - Deptno
    UI Hints: Display Attribute - Dname
    - Edit Dname(transient attribute) and provide following groovy expression
    oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
    return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
    Sireesha

  • Permissions are not displaying correctly on Yosemite server

    My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
    I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share.  When checked from the server's finder, everything looks correct.  The server is setup for both AFP and SMB on file sharing.  I have also tried setting permissions from the server's finder and seemed to make no difference.
    When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group.  Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
    The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
    Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • With IE UIX buttons are not displayed correctly

    Hello there,
    We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
    Thanks,

    Hi Andy,
    sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
    it happens with random buttons...
    i haven't seen this problem in mozilla. its quite frequent in IE.
    our customer is very annoyed by this problem :(

  • Web certificates are unrecognized.  Web pages do not display correctly.

    Web certificates are unrecognized.  Web pages do not display correctly.
    Web pages post as mostly text but links do not work.    for example youtube.com
    Upload
    Change
    Creator Studio
    Add account Sign out
    Search
    What to Watch
    My Subscriptions
    Music
    What to Watch
    My Channel
    My Subscriptions 5
    History
    Watch Later 27
    Playlists
    More 
    Cars
    Favorites
    Bob 2
    Robin
    Liked videos
    Subscriptions
    Benz lu
    This Connection is Untrusted
    You have asked Firefox to connect securely to smf.crm.red.com, but we can't confirm that your connection is secure.
    Same problem in Firefox.
    Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
    What Should I Do?
    If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I restored my iPad 2 from the iTunes backup but my music, audio books and iBooks are all missing.

    I restored my iPad 2 from the iTunes backup but my music, audio books and iBooks are all missing. It seems only the Apps were restored and settings. Anyone else had this problem?

    Oh and the bizarre thing was that when I opened iBooks for the first time after the restore it showed all the books in the open collection and then they vanished in front of my eyes!

Maybe you are looking for

  • Group Titles not working in Marker lists

    Framemaker 7.2 I've created a special alphabetical list of markers, using a custom name for the marker.  The list generates just fine and I have the page formated as I want, except for the need to add group titles. I created, on the resource page, a

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

  • Color correction applied to multiple clips

    When using FCPX, is there a way to apply a color adjustments to all the fragments of the same clip? Or is there a way to batch edit clips without actually having to do all your color correction before editing?

  • Receiving a inbound xml file in Business Connector

    Hi All, The requirement is we are receiving an inbound xml file at the BC end from a third party application. We have configured the url in the third party end as follows - http://ip address of BC:port address/invoke/Folder/Service When the file is p

  • Computer login password

    I am trying to download adobe flash player it is asking for my password to continue. I tried typing in my computer login password but this does not work. Any suggestions?