Pictures leave blank space at bottom of 4x6 paper

When I print pictures with photosmart C4680 on hp advanced 4x6 photo paper some of the pictures leave a blank space on the paper. It seems like it starts to print before the paper is loaded the whole way into the printer. The picture seems to be slid off to the left leaving a blank space on the right (or at the bottom). It does not do it on every picture and the amount of space differs from picture to picture.

I have the same problem with a Photosmart D7360. Looks like the image is displaced 1/2 to 3/4 of an inch. Does this for some pictures in a folder during a single print session but not others, and persists in doing this to those specific picture files when I repeat the print effort. Seems entirely random and is entirely frustrating.

Similar Messages

Printing to pdf from Safari 5.1.4, last 16 lines compressed leaving blank space at bottom of pg. No prob. wD/ IE or Word. Running Win 7, Dell Laptop.

When I print to “Adobe PDF” from Safari, the last several lines are compressed leaving blank space at the bottom of the page where the normal size lines would normally be. This does not occur when printing from Internet Explorer or MS Word. I am running Windows 7 on a Dell Laptop. Anyone know of a solution?

When I print to “Adobe PDF” from Safari, the last several lines are compressed leaving blank space at the bottom of the page where the normal size lines would normally be. This does not occur when printing from Internet Explorer or MS Word. I am running Windows 7 on a Dell Laptop. Anyone know of a solution?

How do you add additional fields in infotypes?i want to leave blank space

how do you add additional fields in infotypes?i want to leave blank space in front of the field?

Hi,
To add new fields go to PM01 and select Enhance Infotype option and then follow the steps in sequence.
I am not getting blank space in front of the field. please elaborate it.
Regards,
Raja.D

Deleted audio segment leaves blank space that I can't remove

I had a 5 min song and after adding pictures for a slide show, I found I only needed 2:30 of the audio clip so I split it at the end and deleted the unwanted end segment of the song. However, there is now a blank space for 2:30 left!
I went to clip mode like some suggested in previous similar questions, but there is "no black clip" to select and delete.
How can I "shrink" or reduce the original movie length now that I've shortened it by removing the end part of the audio?
Thanks!

I have experienced the same thing. It used to be thought that a stray audio clip had relocated to further out on the audio track, but I never found one. Usually, the movie reverted back to end where the 'good' audio or video clip ended.
However, I highly endorse what Bengt recommended re: exporting your movie to Full Quality QuickTime.
I do that and then put the quicktime movie into a new iMovie project and check the end of it. Sometimes there will be several seconds of 'snow' as seen on tv in the old days when stations went off the air at 1am. You can cut out this excess and have your movie end where it is supposed to. Just use this qt version to upload or import into iDVD.

Blank space at bottom of page in FF

I was sent some code to put a CMS system behind.
But on testing the content on the div elements I have found I have blank space on the bottom of the page.
I know this is caused by position:relative;
but I thought using this was the correct way to display two divs side by side left and right column.
If I take it off the video on the right column goes off too far right.
I am testing on IE 8 and FF 3.5
Resolution:
1024 in IE
1600 in FF
* {    margin-top: 0px;
    margin-left:0px;
    margin-right:0px;
    margin-bottom:0px;
    padding-top:0px;
    padding-bottom:0px;
    padding-left:0px;
    padding-right:0px;
p {
    font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
    font-size: 12px;
    color: #9c9c9e;
    line-height: 20px;
    font-weight: lighter;
h1 {
    font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
    font-size: 21px;
    color: #4d485c;
    text-decoration: none;
    font-weight: bold;
    padding-bottom: 5px;
body {
    font-family: "Trebuchet MS", Arial, Helvetica, sans-serif;
    height:0px;
.logos {
    padding-right: 30px;
.logo {
    margin-top: 62px;
    margin-left: 50px;
#button {
    float: right;
    width: 238px;
    margin-right: 50px;
    margin-top: 62px;
#wrapper {
    width: 999px;
    margin-right: auto;
    margin-left: auto;
    border-right-width: 1px;
    border-left-width: 1px;
    border-right-style: solid;
    border-left-style: solid;
    border-right-color: #DDD;
    border-left-color: #DDD;
#header {
    height: 178px;
    background-image: url(images/headerbk.jpg);
    background-repeat: no-repeat;
#sidebar {
    width: 347px;
    float: right;
    padding-left: 15px;
    padding-top: 17px;
    position:relative;
    top:-299px;
    clear:right;
#sidebar2 {
    width: 347px;
    float: right;
    padding-left: 15px;
    padding-top: 17px;
    left:30px;
    position:relative;
    top:-1450px;
    display:block;
    z-index:2;
    clear:right;
#rotator {
    width: 586px;
    padding-top: 18px;
    margin-bottom: 18px;
    float:left;
    position:relative;
    clear:left;
#rotator2 {
    width: 586px;
    padding-top: 30px;
    margin-bottom: 18px;
    float:left;
    /*position:relative;*/
    clear:left;
#bodyText {
    width: 586px;
    top:-550px;
    position:relative;
    clear:both;
#bodyText2 {
    width: 586px;
    /*top:-550px;*/
    position:relative;
    display:block;
    top:20px;
#slider {
#footer {
    background-color: #A2A2A3;
    border-top-width: 1px;
    border-top-style: solid;
    border-top-color: #FFF;
    border-right-width: 1px;
    border-left-width: 1px;
    border-right-style: solid;
    border-left-style: solid;
    border-right-color: #B1B1B2;
    border-left-color: #B1B1B2;
    padding-top: 30px;
    padding-right: 50px;
    padding-bottom: 30px;
    padding-left: 50px;
    height:120px;
#footerImages {
    position:absolute;
#maincontent {
    background-image: url(images/mainbg.jpg);
    background-repeat: repeat-x;
    background-color: #e5e5e5;
    padding-left: 50px;
    height:655px;
    /*overflow:hidden;added this and it shows*/
#maincontent2 {
    background-image: url(images/mainbg2.jpg);
    background-repeat: repeat-x;
    /*background-color: #e5e5e5;*/
    padding-left: 50px;
    height:100%;
    /*overflow:hidden;added this and it shows*/

The_FedEx_Guy wrote:
do you need the page code?
Yes please.
No page code no possible answer.

Embedding a pdf in website leaves blank space at top

I am wanting to embed a pdf into my website using dreamweaver, and applying a template, but it is leaving a blank space at the top. You can see this on www.maulroad.com/newsletter.pdf. Here is the embed code used.
<embed><object type="application/pdf" data="http://www.maulroad.com/Newsletter.pdf" " width="100%" height="90%" < >/object ></embed>
Any thoughts on how I can get this without the blank spot?

I agree with Hans. Embedding PDF never works well because PDF is a print document and HTML is a web document. In order to view PDFs, your end users must have an appropriate plug-in for their browser and a viewer like Acrobat Reader installed on their system. That's a lot of ifs...
This is how Adobe does it (images and links to PDF files)
http://www.adobe.com/manufacturing/3dpdfsamples/3dsolutions/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Blank Space at Bottom of Inserted Code

It appears to me as a bug.
See example here:
http://social.msdn.microsoft.com/Forums/en-US/a6eacddb-68ae-4576-af77-69c057102d5a/decision-factor-benefits-of-computed-columns?forum=transactsql
Image:
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Try padding it on top with a single shift+Enter after clicking the codeblock editor's [insert] button. That way you won't need to use the html editor. It's how I just got the result above.
Or if you like html editing, then pad it with a <br> or two ordinary Enters (the first gets stripped upon clicking [update] ).
Thanks, I think I'm going to start using this. One liners have looked pretty odd since the codeblock height was enforced.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Removing Blank Spaces caused by Supressed data

Hi All,
How we can remove the balank spaces caused by supressed data in crystal reports.for eg
Item Code:I0002
               Timer
               For Time Info
               100
ItemCode:I00003
               Pen
               20
if there is txt added against pen as for Timer(For Time Info)
it will leave blank space.How to remove blank space.
Thanks,
Neetu

Hi Neetu
I have tried replicating your requirement at my end using Xtreme Sample database below are the steps which I have followed.
1)I have customer Id field,Customer name field field placed in details section.
2)Click on Section Expert
3)Click on Details.
4)Check the second option as "Suppress(No Drill Down)".In front of that there is one icon as "X-2".Double click on that icon.
5) Type the below formula
     if {Customer.Customer ID}=157 and {Customer.Customer Name} ="Aruba
     Sport" then true
    else if {Customer.Customer ID}=148 and {Customer.Customer Name}
     ="Koala Road Bikes" then true
     else false
6)Save and close.
With this formula where condition matches the specific criteria it will suppress the section and there will be no blank spaces.The rest of the data will be shown.
Hope it will help you.
Regards
Asha

Changing text within frames without adding space at bottom

Anyone know if there's a method for changing text within frames so that the successive text automatically flows into position without creating blank space at bottom of that current or a subsequent frame?

Peter,
You can combine the discussions if you want. I actually deleted a sentence beginning the second discussion explaining that it was related to the first. I thought it might impede the discussion.
Let me describe my problem more completely. I'm adjusting a book that was carefully crafted using frames for each page so that the text extended to the bottom of each page (frame). This often splits text within a paragraph between two pages. This was done so that the customer doesn't feel they are purchasing any blank space and for the aesthetic purpose of filling each page with text. The only exception is the beginning of new chapters or sections.
The problem is that I want to change a word here and there in preexisting paragraphs. When I do, space often one-third the page length is generated at the bottom of a page (frame). To fill that space and extend text to the bottom of the page again requires -given my current understanding of options- selecting the paragraph (beginning on one page and completed on the second) that has become interrupted by the blank space and performing a "keep lines together" option. Unfortunately, this usually generates new blank space on a subsequent page, requiring a new "keep lines together"; in a seemingly unending regress of this procedure.
What I require is a method enabling me to add text within a paragraph that will avoid the generation of the blank space by flowing the subsequent text (composing one or more paragraphs and splitting a paragraph between pages if required) to the end of the page; completely filling the page without requiring any use of "keep options" or whatever.
Richard

Iphoto 9.6.1 how do I leave pix space blank, filled in with background color

I'm making a photo book using iPhoto 9.6.1 How do I leave pix space blank, filled in with background color? I want half the page taken up with a picture and the other half colored in.

There's actually an option to iPhoto Library Manager that makes this all almost work flawlessly (and work well enough for me). With the exception of Photo Albums that the pictures are part of, if you select "Library > Rebuild Library..." and then select "Scavange Orphaned Photos" check box, then it will put all the Photos and Movies into the "Scavanged Photos" album. It matches the modified pictures to their originals. It preserves all the event names and photo groupings. All the meta-data I could spot check it got right (although with 44k pictures, I only checked a few). If you fail to select this option, however, it will find no pictures at all when it goes to rebuild the library (this was true of the small test libraries I tried as well as the big, monster 280GB library I just finished converting). The conversion process took 5 hours to run, but in the end produced a library my new iPhoto can read and that I can interact with. I'll be suggesting to the iPhoto Library Manager folks a notation that would estimate the number of Orphaned Photos and display that number as a hint to the user that the option would be useful.
Edited: Thanks to Old Toad and LarryHN for their help in finding which of the many options to transition this library to 9.5.1 I needed to use. Sorry if I took my frustration of the past several months out on you guys for generously trying to help me.

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. How can I go back to attached images?

Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.

Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom

How do I get rid of the blank space at the bottom of the new Firefox menu?

The new firefox 4 has a different menu system. IT has blank space at the bottom wiht just a plus sign that opens new tabs. I can get that from the + sign by the tabs and don't want it or the rest of the blank space on the bar. I need all the space in the main window I can get. How do I get rid of this?
Found my own answer, disable Conduit Engine toolbar, whatever the heck that is. Why it's enabled to start with is beyond me.

Hi stephanie,
These are unrelated questions/statements.
Space before and space after a paragraph are controled in the Text Inspector, as you've found out.
Pages will create a page break whenever there is no room for another line on the page. That break can come anywhere in a paragraph.
You may be thinking of Widow and Orphan prevention, and the other Pagination controls, found under the More button in the Text Inspector. (If that's what you found, then thanks for the refresher! I hadn't been to that pane for awhile, and had forgotten the variety of pagination controls available.
Regards,
Barry

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

I imported a 1-hour long Soundcloud remix to Garageband and then cut it to the 2-minute part I wanted. But my garageband project is still 58 minutes of blank space (the toggle on the bottom) .. how do I get rid of this?

I imported a 1-hour long Soundcloud remix to Garageband and then cut it to the 2-minute part I wanted. But my garageband project is still 58 minutes of blank space (the toggle on the bottom) .. how do I get rid of this?
.. I didn't know how to shorten it to a question for the header

stephgeske wrote:
cut it to the 2-minute part I wanted. But my garageband project is still 58 minutes of blank space
either drag the End of Song marker to the end of the clip:
http://www.bulletsandbones.com/GB/GBFAQ.html#eos
(Let the page FULLY load. The link to your answer is at the top of your screen)
or export the exact length:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

I want to buy a book I created in iPhoto. I want to leave blank some spaces in the photo layout, but the app won't let me "buy the book" unless all the layout spaces are filled.

I want to buy a book I created in iPhoto. I want to leave blank some spaces in the photo layout, but the app won't let me "buy the book" unless all the layout spaces are filled.

That is correct - you must have a photo in every photo frame to order
LN

Pictures leave blank space at bottom of 4x6 paper

Similar Messages

Maybe you are looking for