Pictures not appearing - sometimes

I am using the x5 version with Word 2003 SP3 and I have been
having issues with some of my pictures not appearing when I
compile. In this project I make a .hlp file and I don't remember if
I have had this issue with the few .chm projects I have. If I use
the Active Test button, my picture appears, but when I make the
final hlp file I end up with the {bmc filename.bmp} link appearing
instead of the picture.
I have played around with inserting another graphic and
moving lines around and there is something really strange in there.
If I insert another graphic, the new one shows up as the {bmc} and
the old one actually shows the picture. If I remove the new
picture, I go back to showing the {bmc} for the old one again.
In other cases I had to move the picture to a particular line
and if there were any blank lines around it I would get the {bmc}
again. I only work on help projects a few times as year, so I do
not remember exactly what I did to get the picture to appear the
last time this happened. I just remember getting it to appear by
putting the picture right next to a certain paragraph and I left it
that way - even though it wasn't the best looking page that way.
Has anyone had anything similar to this happen before? It is
really hard to figure out what is going on and finding and fixing
the missing pictures is a big project. Any ideas would be greatly
appreciated!

I too had a similar problem with my winhelp 2000 project. The
images were not getting displayed in the output.
I was told by Mr. Peter Grainge that the images should be
only inserted through the robohelp's New Help Image tool button. It
solved the problem.
As I was adding another word document to the project, I ended
up creating two separate folders for the images from both
documents. Now, when I generated the output the images again went
missing. So, I took a chance by cutting and pasting all the images
in a single folder and presto !! It works. The images are getting
displayed.
Just check whether the folder where ur images are stored lays
in BMROOT. If not, then you have to insert them again.
Enjoy!!

Similar Messages

  • .gif Picture not appearing in design panel

    I have a .gif picture not appearing in design panel but it
    appears in the browser preview.
    <div id="footerPanvalid">
    <image src="images/valid-xhtml10-blue.gif" alt="Valid
    XHTML 1.0 Strict" height="31" width="88" />
    </div>
    #footerPanvalid {
    position: relative;
    right: 200px;
    padding-left: 300px;
    z-index: 23;
    valid-xhtml10-blue.gif also appears in the assets panel
    Any ideas whats going on?

    Put a border around #footerPanvalid to make sure that you can
    see it in
    Design view.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "nikos_golf" <[email protected]> wrote in
    message
    news:fclmk4$39d$[email protected]..
    >I have a .gif picture not appearing in design panel but
    it appears in the
    > browser preview.
    >
    > <div id="footerPanvalid">
    > <image src="images/valid-xhtml10-blue.gif" alt="Valid
    XHTML 1.0
    > Strict" height="31" width="88" />
    > </div>
    >
    > #footerPanvalid {
    > position: relative;
    > right: 200px;
    > padding-left: 300px;
    > z-index: 23;
    > }
    >
    > valid-xhtml10-blue.gif also appears in the assets panel
    >
    > Any ideas whats going on?
    >

  • Item pictures not appear does not appear when I sync

    Item pictures not appear does not appear when I sync

    after looking at a few other posts, i tried the uncheck the sync box, did a sync, rechecked the box, and synced again.  the music is now downloading into my phone.  if anyone else has this problem try this first.

  • Pictures not appearing in after upgrade to SRM-MDM Catalog 3.0 SP7 Patch4

    Hello,
    Due to some issues in Advanced search we performed the service pack upgrade from SRM-MDM Catalog 3.0 SP5 (with MDM 7.1.03.72) to SRM-MDM Catalog 3.0 SP7 Patch4 ( MDM 7.1.04.146).  With this new SP, the Pictures are not appearing anymore under the Hyperlink section anwhere in Catalog browser( Compare, Context view, Item details). With earlier SP pictures were appearing perfectly.
    We have done like this:( refer earlier thread - Re: SRM MDM Catalog 3.0 Image display) thanks Sudhanshu, Jitesh and Mandeep for suggesting that solution!
    Using the hyperlink field
    type : rendered
    MIME type : image type i.e. .jpg
    URL : web URL
    We had gone for this option because we dont want to store impages in MDM, and this worked perfoectly until new SP upgrade.
    Any clues?
    Thanks
    Pravin

    Hi Bala,
    Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink  as type-Rendered, MIME type as JPG and a valid URL.
    I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were  on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
    Here are the notes for reference of others who get into same issue.
    Note 1450593 - Implementation of BlobCache
    This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
    Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
    This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
    But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade,  I would like to know if there is a workaround.
    Thanks
    Pravin

  • Pictures not appearing in iphoto library

    I'm using version 2.0.1 of iphoto. Some of the pictures that are in my picture folder will not appear in the photo library. I have "rebuilt" iphoto, but some of the more recent pictures do not appear in the library. Any ideas on what else I could do to get all my photos to appear in the library.
    iMac   Mac OS X (10.4.8)  

    Some of the pictures that are in my picture folder will not appear
    in the photo library
    That's not surprising since iPhoto 2 wouldn't have any way to know anything about photos that haven't been imported into iPhoto. Your Pictures folder isn't the same as your iPhoto Library folder.

  • Pictures not appearing

    Hi, I've just purchased the ilife08 and some of the pictures does not appear on the event/library... there is just a white slashed surrounding!!!

    Lcavanne
    Welcome to the Apple Discussions.
    Try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild. Choose the top three options.
    Regards
    TD

  • Pictures not appearing in Personalized Mail Form

    Dear Friends,
    In CRM 5.0 under transaction CRMD_EMAIL when i am inserting Logo/pictures from local desktop by insert picture option appearing in the  screen i am unable to do and  a blank screen with crossed sign in the corner image appears always, how to insert please help.
    With regards,
    Sachin Sonkar

    Hi sachin,
    You can see your picture seperately under Main Window
    as picture.
    When you click on text under main window you can only see text but not pictures (all the pictures are shown in X mark)
    But in preview mode you can see all together in one screen.
    You can also test this by usint Channel test to your email ID and check the same once it comes to your mail ID.
    Hope it answers your question.
    Still if you have any queries give me your email ID so that I will send the screen shots of the same.
    Reward points if it helps.
    Regards,
    Madhu

  • Pictures not appearing on exported pdfs.

    Hi,I am exporting reports in pdf format. I have a picture on the report in the report group header. I used the graphics picture to put the picture on the report. When the script runs and exports the report to pdf files, the picture is not appearing on the pdf files. Do anyone have any ideas?Thanks

    HI Beat!
    There's an excellent post on Adobe's site that walks through the differences. It's at http://www.adobe.com/type/topics/info9.html
    However, I believe the caveat about Open Type fonts refers to their extended character set capabilities. You can still see issues with any font that is probably tied to the design and metrics of that particular font. The best course of action is to see if a font will perform under the watermark feature. If so then you're all set. If not—try a different font.
    All your fonts will appear in the dropdown menu. Adobe is most likely just calling on the OS to serve up its list of installed fonts. That shouldn't be relied upon as an endorsement that all of them will function properly in watermark. This is really more of a font issue than an Adobe issue. I have many fonts that just don't respond well in certain programs. And it varies by font and by program so its hard to blame the app more than the font.

  • TS3989 pictures not appearing in icloud on my laptop

    Why would a photo taken on mi iOS device not appear on my laptops photo's?
    previous pictures have appeard but not one taken 4 hours ago.

    Check the my photo stream album on the iOS device to see if the missing photo appears there.  If it doesn't, it was never added to photo stream.

  • Pictures not appearing in mac messages?

    When pictures are sent to my iphone the appear in the thread on my iphone but not the same thread on my mac messages app. ***?

    Hi Bala,
    Nothing appears under the Hyperlink section in Catalog browser, though a valid link exists in Data Manager under Hyperlink  as type-Rendered, MIME type as JPG and a valid URL.
    I have searched Service Market place for this fix of this issue and found that SAP has improved the technology ( from Object Cache to Blob Cache) to display pictures/hyperlinks from SRM-MDM Catalog 3.0 SP06 and MDM 7.1SP04 onwards. We were  on SRM-MDM Catalog 3.0 SP05 and MDM 7.1 SP03 before Dev upgrade.
    Here are the notes for reference of others who get into same issue.
    Note 1450593 - Implementation of BlobCache
    This note states "MDM7.1 SP04 offers new image caching functionality called Blob Cache. The old functionality of Object Cache is replaced with the Blocb Cache mechanism in Catalog 3.0 SP06 P1"
    Note 1505796 - Images not showing in SRM-MDM catalog (error in BlobCache)
    This note talks about the issue in MDM API with Blob Cache. The Fix has been provided in SRM-MDM Catalog SP08 Patch 01.
    But upgrade is not something that happens on the drop of a hat, we dont want to do another upgrade,  I would like to know if there is a workaround.
    Thanks
    Pravin

  • Pictures not appearing as thumbnails

    Hi.  Hopefully someone can assist me.  The problem I am finding is when I go to update my profile picture on BBM, the pictures are not showing up as a thumbnail which makes it difficult to see which picture is which.  I have to click on the picture to see what it is. When I go to look at them through the 'Pictures' icon, they are ok. Anyone know how to change it so that the pictures appear as thumbnails instead of a file name?
    Thanks

    I have solved the problem if this happens to any one else.  I hooked up the phone to the computer and resynced with Blackberry Link and it refreshed the synchonization, I am thinking.  It works now.  I'm not sure why it did what it did, but I am thinking maybe I disconnected before it was finished the syncing and resyncing helped finish the job.

  • TS3989 Pictures not appearing in Photo Stream

    Hi, since 2 weeks ago all the pictures I take with my Iphone 4s won't appear anymore in the Photo Stream.
    I didn't change my settings nor updated anything. Also, the phone is not connected to wi-fi currently but I have 3G and it always worked this way.
    I tried turning iCloud off and on, taking pictures and closing the Camera app. I also checked, just in case, my usage of iCloud and I have the 5 gigas available.
    How can I solve this?

    Check the Photo Stream FAQ. It only syncs when connected to Wifi! Were you jailbroken before? I was at one point, and my phone always thought it was on Wifi through a jailbroken app. Now that I'm not jailbroken, I really really miss syncing over 3G!!

  • Pictures not appearing in Open dialogue

    When I try to attach a picture to an email or document, Aperture appears in the Media-Photo section of the Open dialogue, but no pictures show up. It looks as though there are no pictures in the Aperture library (there are thousands). I am running Aperture 3, sharing is set to Always in the Aperture settings and all the masters are in the Aperture library. Can someone help? Thanks!

    Thanks - I was generating previews, so not sure why they would not show up - perhaps because I have just upgraded to this current machine from an older MacBook Pro. However, I created a new Library, imported photos from outside and inside the original library and now everything appears. I still wonder what was going on, but at least everything now seems to be working properly.
    Thanks again.

  • Pictures not appearing in mail form

    Dear Experts,
    i have the following problem: i am not able to attach pictures to my mailform, either the result is only a red cross or i will get a time out. When i look further in detail, i see that in html-view no path is added, when i upload the picture from my desktop.
    Additionally in SLG1 i get an error with a green icon(!): Problem class important "Error while determining properties for physical document () - -" Object Text SAP Knowledge Provider, Author scenario.
    It seems that there is a problem with the content server. The picture does not get uploaded properly. Thats why the path is missing. I found similar threads, but there was no solution provided.
    Please, do you have any hints on that? Is there a special service missing? I could not find any oss notes on that.
    Thanks a ton for your help!!!
    Best wishes
    Hannes
    Edited by: Hannes Wegehenkel on Nov 25, 2010 5:32 PM

    Hi,
    we had the same problem here.
    We raised an OSS message for this.
    The solution is related to the content server external alias:
    Goto transaction : SICF
    Hierarchy type: SERVICE
    Press F8 and click on "External aliases" button and expand default_host
    and create a new External aliases with "/sap/bc/contentserver" using
    "default_host" and maintain a user and save its password.
    Also set the Procedure as "Standard" or "Required with logon data".
    Hope it helps.
    Regards
    dimian

  • Newly imported pictures not appearing in iPhoto '08 Library

    So, while I was importing a whole slew of photos today, iPhoto became unresponsive (I think because of two RAW images I inadvertantly left on the camera).  I had to force quit iPhoto and when I relaunched it, none of the photos imported show up in my library.  They are available if I browse "All Images," but if I try to drag and drop any of them into the iPhoto Library it says they're already there. 
    Advice?

    Never access photos that are managed by iPhoto in your All Images search. It's a good way to damage your Library.
    Surefire fix: restore from back up.
    Other than that:
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

Maybe you are looking for