Pictures not shown in albums (as per my folders) in Revel after 'access all media' ticked - sort it out Adobe!

Hello,
This is really frustrating after subscribing to upload all my photos to revel.
After ticking 'access all catalog media' I have the following two problems:
1. Pictures are shown individually in Revel, and not in their respective albums as per 'my folders' in organizer. Unless I create another new folder in mobile albums (another 50-plus!) - but why would I do that and create a lot of work?
2. Not all pictures have imported, especially the most recent pictures haven't uploaded.
I have updated to 12.1 Elements - I am using PC Windows 7, and Adobe Revel app on Android.
This is annoying please help Adobe!
Rich

Hi Rich,
Answers to both of your queries are available in step #2 under section "How to get started with Mobile albums?" of my blog: Photoshop Elements (PSE) knowledge base.: Mobile albums and Elements Organizer
Please let me know if you still have queries.
Kind Regards,
Surendra

Similar Messages

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this?

My laptops QWERTY row of keys does not work for long periods at random intervals and only after pushing all the buttons on the row does it eventually turn back on and then will still cut out every now and again, anyone know how to solve this? If not is there any way to actually get a genuis appointment lol to get one of them to have a look at the hardware on the keyboard?

Apple Support (formerly ExpressLane):
https://getsupport.apple.com/GetproductgroupList.do
https://getsupport.apple.com/GetSASO?SG=SG001&locale=en_US

Message app - owner avatar picture not shown

doesnt work in safe mode either. it´s clear intallation, but to be sure i cleared data in contacts and mesasge app too. but with no result.

I got the same issue bro and i just found the solution for it,apps, all apps, clear all at the 2 contact apps that are shown, re sync ur contact list, set up ur avatar photo ONLY dont set the phone number,and ther u go it will be shown again. hope that helps, worked for memrnino wrote:
Can you fix this issue? It happened with 5.0.2, it happens now with 5.1.1. Owner avatar is not shown even if it's set. Tested after repaor with PC companion.

Regarding Firefox 4 does not ask to save tabs and windows on exit even after trying all suggestions

After installing Firefox 4, Firefox would no longer ask to save tabs and windows on exit. Even after trying all suggestions to resolve the problem, the problem continued. Under the corrupted files suggestion to rename two files, that also did not help. The original file names would be recreated automatically, so both file name versions would exist in that folder. NOTHING resolves the problem.
Unfortunately, since that is a very desirable feature I, like other people who do not like Firefox 4, have gone back to an earlier version of Firefox.

You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
* browser.startup.page , seehttp://kb.mozillazine.org/browser.startup.page (1 or 2)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use "Firefox > History > Restore Previous Session" to get back the previous session. 
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Why my tracks are not shown in Album view and Artist view, only Album Artworks are shown???

Dear,
I have not have this problem in the previous version of iTune. As soon as i upgraded it to iTunes 11, it happens.
The problem in here is all my songs, tracks are still here, i can see all of them in "songs view". However, when i change the view to Album View, and click into the Album artwork, there is no track there. When i double click into the Album Artwork, the first song of the album will be played normally.
Same story to the Artist View. Only the Album Artworks are shown and the rest is completely blank.
I have absolutely no idea what is going on here and obviously i am not satisfy with this new version.
Is there any way for me to fix this problem? Please help!
Otherwise i will need to use other software for music playing.
Regard,

Refer this article
The Microsoft.SharePoint.SPFieldCollection.AddFieldAsXml method
http://blogs.msdn.com/b/sharepointdev/archive/2011/01/20/why-do-my-new-list-fields-not-appear-on-the-new-edit-or-display-forms.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Employee picture not shown in ESS

Can someone please help us? We use HR 46C. It is not possible anymore from a certain patch level to use a file store in archivelink, therefore we have configured an HTTP content Server. This works fine, we can upload pictures without any problem. When we test it in transaction PA30 on our SAP system it works fine. We see an photo for every employee for which we uploaded an picture.
However when we use the ITS server to run transaction PZ01 (or PA30) we won't see a picture. After some investigation I found the HTML part of the service file where picture should be shown. This is in the HTML template of PZ01 'SAPMPZ01_500_CORE'. In here the following code is shown:
`if (SHOW_PIC == "1")`
<td width="140" valign=top>
 ``
 <table width=140 border=0 bordercolor=black align=right>
 <tr>
 <td valitn=top align=right><IMG width="140" SRC="`wgateURL(~OKCode="DISPLAY")`" alt="`#Foto`"></td>
 </tr>
 </table>
</td>
`end`
This code will only be executed when teh variable 'SHOW_PIC' has the value '1'. I already took the ocde outside of the if command. Then it shows an border where the picture should be shown however the URL is incorrect so it only shows an red x.
Is there anyone who knows if we forget to configure something so that the picture will be shown? Where will the variable SHOW_PIC be filled for example???
We would be VERY thankful if someone could help us!
Kind Regards,
Nico van der Linden

Hi Sudhir,
thanks for you reaction (and I am sorry for the late response. The problem is solved. It appeared to be a stupid authorization problem.
Kind regards,
Nico van der Linden

Picture not shown in report when user not logged on.

Scenario (also described in thread: http://technet.oracle.com:89/ubb/Forum81/HTML/000726.html)
I create a table mypics:
title varchar2(100), mypic varchar2(100). I create a Portal form that uses file upload on mypic. The form will put the picture into some table...
I then create a report with the following sql:
select title,
'[IMG SRC="'| | decode(MYPIC, '', PORTAL30.wwctx_api.get_image_path | | 'noimg.jpg',
owa_util.get_cgi_env('DOC_ACCESS_PATH') | | '/' | | MYPIC) | |'"]' MYPIC
from SCOTT.mypics
(replace [] with <>)
The report do not show the picture if the report is added as a component in a content area, and the user is not logged on.
(Workarounds are to use portal pages instead i think).
But still, the problem probably has to do with some granting ?
Terje.
null

Hi,
If this is the case, then first of all you have to make your objects language dependant. Then load the data for English (If you have), German etc with 0LANGU as the key of the object.
Then only you can view the descriptions/names/texts etc. in the various languages.
Hope this helps.
Regards,
Yogesh.

Bmp pictures not shown in ichat

My friend keeps sending me bmp pictures over ichat, but they only show up as that page icon. I can drag it to the desktop, get info, and add the bmp extension to it, and it opens in preview fine, but it just doesn't show up in ichat. Is this a bug, or does ichat just not support bmp?

does anybody else ever get bmp files over ichat? I'd like to know if there's a way to get them displayed inside the window without having to do all the renaming and opening in an external program

Pictures not shown in adobe digital editions

well, i basically borrowed a book and it doesnt show the images. it is completely blank where the picture should be.
any suggestions cause its my first time using editions. thank you

Hi Rich,
Answers to both of your queries are available in step #2 under section "How to get started with Mobile albums?" of my blog: Photoshop Elements (PSE) knowledge base.: Mobile albums and Elements Organizer
Please let me know if you still have queries.
Kind Regards,
Surendra

I can only access the camera roll pictures, not my other albums

At first it was working fine, but now when I press the camera key, it automatically goes to the camera roll. I can take pictures, but I can't access the other rolls of pictures in different albums... Anyone else run into this?

Nevermind... I figured it out... just press Photos (duh...)

Cc cleaner has altered page layout, missing buttons, pictures not shown with txt but below, certain pages also not now intertactive..cannot scroll and over buttons and click to enable choice. help to

Hi, Please help.
I'm currently using Firefox v4.0.1, which I like and am happy with, as it allows me to use my Kaspersky link filter and virtual keyboard.
Anyway, I recently decided to clean my registry and history using cc cleaner.. I did not back up as I had never experienced problems before. Once cc cleaner had finished and I opened Firefox I noticed that my two home page layouts had altered. The Supanet home page is now all disjointed, buttons are scattered to the left and right of the page, where once they where side by side, all of the images and text seem to be beneath each other and instead of one page i now have to scroll down and down to the full page, all text and image seem to be left margin.
On the google home page certain buttons are there but the text within has disappeared, although the buttons work, a search for Mail online through google..(or Supanet home page) is not a problem, however, once we arrive at the site it pretty much displays the info in the same layout/manner as the Supanet hompage. Further more certain buttons on other sites are no longer interactive..eg, Asda voucher print out. i do not wish to update to other version of firefox as i would lose Kaspersky buttons..so please help..I've tried everything..even re installing version 4.0.1..Help, I now it must be simple..but I'm not a techie!! Many thanks!

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Please update Firefox to the latest version via "Help > About Firefox" or "Help > Check for Updates" 
The Firefox Firefox 4.0.1 version that you currently run is no longer supported with security updates.
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

I have locked myself out of my iPad and can not restore unless I go onto the iPad and turn off FindMyiPhone, how do I sort this out?

After installing iOS7 I was prompted to make a passcode, I did so and stupidly forgot and now continually am disabling my iPad, ways in which I have read you can sort this is restoring your iPad, however I can not restore without iTunes telling me I need to go onto the iPad and turn off FindMyiPhone! How else can I sort this? It is logged into my apple account and everything! This is an iPad 2 also ASAP help!!

Hello shanefox,
This can be done by logging in at iCloud.com and removing your device via the Find My iPhone web interface.
iCloud: Remove your device from Find My iPhone
http://support.apple.com/kb/PH2702
Cheers,
Allen

Pictures not appearing in Personalized Mail Form

Dear Friends,
In CRM 5.0 under transaction CRMD_EMAIL when i am inserting Logo/pictures from local desktop by insert picture option appearing in the screen i am unable to do and a blank screen with crossed sign in the corner image appears always, how to insert please help.
With regards,
Sachin Sonkar

Hi sachin,
You can see your picture seperately under Main Window
as picture.
When you click on text under main window you can only see text but not pictures (all the pictures are shown in X mark)
But in preview mode you can see all together in one screen.
You can also test this by usint Channel test to your email ID and check the same once it comes to your mail ID.
Hope it answers your question.
Still if you have any queries give me your email ID so that I will send the screen shots of the same.
Reward points if it helps.
Regards,
Madhu

All media players randomly stop outputting a picture

I use mainly Xine-UI. Sometimes after actually playing fine for quite some time, it will suddenly terminate. After that, all media players including xine will no longer display video, only audio. The video won't be black but "bugged" in the way that it does not refresh what was displayed there previously (so for example a thunar window will still be partially shown).
The behaviour actually slightly differs:
SMPlayer will behave as just described, but will continue to run like that and at least play the audio.
Gnome-MPlayer will behave just as SMPlayer except it will display a black picture, not a 'non-redrawn' one.
Xine however will start, a super short moment of audio will be played and then xine will immediately terminate.
Also noteable: If I start Xine when the bug occured and quickly switch workspace before Xine finished loading up, then Xine will play on the "hidden" workspace and output the audio. But the moment I actually switch back to that workspace it will terminate.
These problems seem to occur randomly and I have to log out of X and log back in to "fix" it each time. That will reset everything to normal until it happens again.
Last edited by mir91 (2014-09-25 20:50:45)

That "or something similar" is hardware acceleration and probably vaapi (or vdpau? both exist, find out which, although if you don't know it's likely to be vaapi) which leads to https://bbs.archlinux.org/viewtopic.php?id=188064 and https://bugs.archlinux.org/task/42221 - so try to disable it in the players or update/wait for linux 3.17
Also somewhere in some logfile, starting the player in question on console and pasting the output here would probably suffice for initial debugging
Last edited by V1del (2014-10-17 07:02:56)

Album art not shown in finder

Embedded album art in audio files is not shown in finder since I upgraded to ML (worked fine in SL).
Other peaple report a solution of the problem with elimination of Voice Memos. But in my case this is not evident because I do not have Voice Memos.
Does somebody know the solution of the problem?

After hours struggling with this issue I finally found a solution (my setup is iTunes 10.7, OSX 10.8.3):
(But my workaround is only for people who know how to handle iTunes libraries!!! And backup first!!)
Open a new user account on your mac.
Generate a new iTunes library called 'itunes', no other name!
Import some files with embedded album art.
Drag such a file back to desktop and you should see the icon of album art.
Everything is like it should be.
Now copy this new itunes library to your user account of origin.
But first rename your old iTunes library different from 'itunes' e.g. 'itunesorigin'
Open the new iTunes and drag one file to desktop, now miraculosly all audiofiles in all of your itunes libraries should show up album art IN FINDER including preview and quicklook.
But this state is not stable. As soon as you open the old 'itunesorigin' the problem starts up again.
So, the next steps are:
Open the new iTunes and in preferences select the media folder of 'itunesorigin'. OK, say no to 'collate data'. Close iTunes.
Now copy and replace from 'itunesorigin' to the new iTunes the following files:
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.itl
iTunes Library.xml
Open the new iTunes and it should look like the old 'iTunesorigin' with all your playlists etc..
Close again.
Move the media folder from 'iTunesorigin to the new iTunes folder (replace).
Open new iTunes and select in preferences the new location of the media folder.
Now you should have the file iTunes Music Library.xml instead of iTunes Library.xml.
(iTunes Music Library.xml is the default if you have multiple libraries)
Done! For me its stable and I am happy. Your iTunes folder should look like this picture:

Pictures not shown in albums (as per my folders) in Revel after 'access all media' ticked - sort it out Adobe!

Similar Messages

Maybe you are looking for