Pictures of the Black N'Red Vaja case

This thing is pretty cool. Leaves marks on the while iPhone though. I wish I didn't get the belt clip...
http://www.flickr.com/photos/89794422@N00/sets/72157606819901807/

That's a bit harsh... It actually is a really nice case. I suppose if the Zagg Invisible Shield were easier to apply to the back of the phone I would stick with just that.
Gone through two of them...
I kept my last iPhone in my pocket with no case, until one horrible day... I got out of my car and the case slipped out of my pocket onto the garage floor. I put a nice crack in the glass screen. So, there was my lesson on not using a case. Apple Store replaced it because they could not see an impact mark on the phone.
So, if you are gonna have a case, should be a good one.
I had the Elan Form hard leather shell case. Was okay but I did not like the two piece connection thing. I ordered the Case Mate Carbon Fiber Case, which was horrible because it impacted your ability to text, because the lip of the case extended onto the screen. I tried the In-Case leather sleeve, but it didn't fit at all, I mean at all. I returned one sold the rest and got this, and am pretty happy with it.
I have Clear Armor on the screen.

Similar Messages

Whenever i go to open a picture message in full view the black loading screen just comes up with no picture? (verizon iphone 5)

I have a 32gig iphone 5 on verizon and whenever i go to open a picture message the black screen that says loading just comes up and i can't view the picture... any help? PLEASE!

Try using the wall charger to charge your iPhone. Some USB ports do not enough power to charge your phone, or at the very least, it will take a much longer time than a wall charger.
You will find that after having it plugged into the wall for 10min, it will have enough power to indicate that the battery is now charging.
Save your money from buying a battery for your next iPhone :-)

I accepted iOS 8.3 upgrade last night on our iPad and now cannot turn it on - get as far as a black screen with the picture of the charger and itunes logo - help please!

I accepted the latest 8.3 iOS upgrade last night which resulted in my not being able to turn on the iPad.
Following the troubleshooting guidelines I can get as far as the black screen by forcing a restart (holding both buttons) all I can see is the diagrammatic picture of the charger and the iTunes red logo. I cannot move on from here and the instructions indicated that a message should show offering the iOS upgrade - but this is not happening for me!
If anyone can help it would be hugely appreciated - many thanks.
I think we have an iPad 2 (approx. 2 years old)
Tracey

Thank you for using the Apple Support Communities
It sounds like your iPad is in recovery mode after an error in the update process that may have occurred. The solution to this would be to plug it into a computer running the latest version of iTunes and press the restore button. This will ease the iPad and reinstall iOS. Hopefully you setup an iCloud or iTunes backup for the device.

TS3274 I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?

I just updated my Ipad to I0S 7.02 like it asked me too. Now i have a black screen Itunes logo and a picture of the plug in cord. I can't get to my home screen. What happened?

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

I have a model 1,1 Mac Book in the black case. How can I transfer about 30 GB of stuff to a MacBook Pro running Yosemite? Can't do a Thunderbolt transfer. The Seagate backup drive I bought doesn't support 10.5.8. Thank you.

How do I transfer 30 GB of stuff, mostly text documents, bookmarks and a few hundred photos from a MacBook model 1,1 in the black case, purchased in (2007?) running Leopard 10.5.8 with a 667 bus, 2 GB, 256 GB to a MBP 13" Retina running Yosemite 10.10.1? Using Migrate is out. Discovered after I bought it that the Seagate Plus Backup for Mac does not work with 10.5.8. OnetoOne recommends backing up my data before I do that, which seems like a good idea. Have a 801.11 n Time Capsule that also isn't working so that is not presently an option. Thank you.

The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

Using footage from my iPhone 4, how can I remove the black bars on the sides of my picture? Or change the color to white...

My footage is vertical and there are two black bars on the side filling in the rest of the picture. I want to imbed this into PowerPoint without the black bars on the side. Any suggestions on how I can remove them or at least change the color to white? I changed the background color in View > Background > White, but it was only for editing purposes and didn't keep the color after rendering.

To change the background to white, in FCE, place the video on track V2 and place a color matte generator on track V1. The default color for the color matte is grey so you'll need to change it to white using the color picker.
-DH

Selecting and copying only the black and gray of picture

Hi everyone,
Looking for some help. I am a Paramedic Instructor and want to clean up some heart rhythms to make them more neat and presentable for use during class. Below is the sort of image I would be working with.
What I would like to do is remove only the black and gray lines (when they print out of the EKG machine some lines have some gray in them) and place them on a neater cleaner background as below
(The image above I found on a website where the creator has 100's of EKGs that this has been done with, but have been unable to get him to tell me how it was done)
Im hoping someone will be able to figure out how this can be done and lend me some help. Also let me know if another Adobe product would be more useful in this situation.
**I have CS6 Master Collection so you know what programs I have available to use**
Warm regards,
Bryan
Flight Paramedic/Instructor, Maryland

Hi Bryan,
You can probably remove most of the red lines using some method in Photoshop, like Channel Mixer Adjustment Layer (set to Monochrome) or Black & White Adjustment Layer adjusting the Red slider. Then you may have to use Levels (or Dodge Tool) to make the remaining red lines (now light gray) turn white.
Once you have a BW EKG trace with no red, you can put it on a layer above a clean graph and set its Blend Mode to Multiply.

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

When I got a new iPhone5, I experienced short battery life, and system sofware issues were not the cause. The camera also takes a blury picture regardless of lighting and I have the black one. Has anyone else experienced similar problems?

What makes you so sure it isn't software?
The camera can be focused by take the point of focus on the touch screen.
If it is new as you said, it should be under warranty. Make a Genius Bar appointment or contact Apple with a repair request.

Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

When forwarding email with Firefox (default browser)the pictures in the email (not attachments) will not open , only shows boxes with a red x on top at the receiver, but when sending with IE, the pictures open, this happens only recently since a week ago.

I forward a message with pictures in it with Firefox, the receiver can not see any pictures, only boxes with a red x, but can read the message.
But when I forward the same message with pictures with IE,
the receiver can see the pictures and read the message too.

When going to a website the picture was small - tried changing the Zoom size , tried Zoom Reset - the text did change size but the layout distorts - found under View - Zoom - Zoom Text Only was checked --- Removed this check mark and the website returned to normal size and Zoom worked normally again. I am 99.9999% sure I did NOT check this myself and there is no one else on the computer to cause it. Maybe this will help.

So i was merging pictures together in events and all of the sudden I had several come up with no pictures just the image number when I click on the picture which is bland a black exclmation point shows up. Have I lost my pictures for good?

So I was merging pictures in the events and all of the sudden several went black and when i clicked on the photos they were gone and when I click on the blank picture with an image number under it an exclamation point show up. Have i lot these pictures for forever?

I'm sorry, but your sister, unless she had already turned on the "Find my iPhone" feature and the person who took the phone has not disabled it, is out of luck. She should report the theft to local police authorities, including the serial number of her iPhone. While her experience is unfortunate, there are good reasons why Apple cannot do anything else about it.
I hope she gets her phone back.
Best of luck.

HT1454 HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

HELP! ITook loads of photos on my ipod touch, and when i went to look at them they were just black images , and then out of 50 bout 7 of them came out?anyone know how to get the black pictures turn out ?

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup

Replacing a picture turns the background black

I am working on a project and when i replace a picture in the project the preview screen turns black but the time line has the changed picture. When exported the background is black and not the picture.

please take a look at the discussion thread http://forums.adobe.com/message/4907967#4907967
if you still have any doubts, feel free to reply back

How can I buy apple watch for the space black stainless steel case and the black sport band for one order?

How can I buy apple watch for the space black stainless steel case and the black sport band for one order?

Unfortunately no. I asked the same question when I went to the local Apple Store for my "try on" and as of now you would have to order the watch with the metal link band and the black sports band separately.

Pictures of the Black N'Red Vaja case

Similar Messages

Maybe you are looking for