Pictures shown less than 0,1 second?

Hi,
I'm about to make a cartoon and would like to use iMovie. Is it possible to show a picture for 0,05 second?

In NTSC, you can go to .0334seconds
In PAL, you can go to .04 seconds
The above are the length of one frame of video.
The default settings let you edit to .1 seconds.
You can change this in iMovie Preferences by putting a check next to the box that says "Display Time as HH:MM:SS:Frames.
You can do 1 frame, and multiples of one frame, but you cannot do half a frame, so I don't know if you can do exactly .05 seconds.
Message was edited by: AppleMan1958

Similar Messages

IMovie Won't Let Me Trim Clip Length To Less Than 1.0 Seconds

Anyone have any luck trimming clips down to less than 1.0 seconds?
I'm doing some video editing on iMovie for which I want to trim clips down to about 0.4 to 0.6 seconds depending on the audio track I'm trying to match. I can't seem to get iMovie to let me trim a track down past 1.0 seconds. When I try to trim it, the length just stays at 1.0 seconds. I HAVE been able to take a clip that's 1.0 seconds, split it, and then end up with two clips of 0.5 seconds each. However, when I try to make any length adjustment on these shorter clips they automatically jump back out to 1.0 second lengths and I'm back to square one.
Thanks in advance and happy iMovie-ing!

I find that splitting a clip is much easier then trimming.
http://help.apple.com/imovie/iphone/1.2/index.html#kna257fc915
So I tend to scroll through to where I want to make and edit, and then split the clip, and delete the bit to cut out.
And then you can go as close as about .4 seconds.
Sadly iMovie iOS isn't really made for fast cuts.
So the only advise I can give is to split clips to get them shorter.

How do I reduce a picture to less than 50kb and less than 500 by 500 ratio?

I'm trying to upload pictures to a Web site that requires the size of the picture to be no larger than 50kb, as well as less than 500 by
500.
I've tried cropping and exporting. I can get the aspect to less than
500 by 500, but then the kb size gets larger.
Thanks,
Paul

Paul,
iPhoto won't downsize your photos, since your original would lose much quality if you could do that. Just crop to best suit the aesthetics of the photo. Then to resize for the website, do File > Export > File Export to a Desktop folder. Instead of "full size" select "scale photos no larger than" and type 500 pixels in one of the dimension boxes. (Choose the larger dimension - width for landscape photos, or height for portrait.) iPhoto will automatically constrain the proportions and enter the second amount. Only the exported copies will be resized. Upload those from the Desktop to the website, then trash when finished.
Regards.

How do I change the duration of a still image in iMovie to less than 0.1 second?

I am creating a movie using iMovie where I need the still images to be 0.05 seconds each or maybe even less., but whenever I select the still images and go to "Clip Adjustments" and under duration change 0.1s to 0.05s and select "Done", iMovie changes the duration back to 0.1s. I'm fairly new to iMovie and I've been messing around with it for quite a while now and still can't figure it out. Could someone help me?

AppleMan1958 wrote:
… I have found there is a practical limit of about 3 to 5 frames where iMovie does not want to go shorter when using the Duration popup box.
for stop-motion there are perhaps better tools avail
istopmotion is a commercial app (starting at 40€ in the AppStore) offering additional tools for the animation master, such as onioning or tilt-shift.
http://www.dayofthenewdan.com/projects/time-lapse-assembler-1
is some very basic stills-assembler, stitches stills together only, therefor free ..........

My Aperture 3 library menu shows me that some photos, which are high resolution professional pictures, are less than One Mb file size. Are the full size masters held elsewhere, and if so how do I get to them ? You've guessed I,m a newbie - please help.

In Aperture 3 and using File>Get Info, I'm told that many photos, which are 7+ Mb's are only One Mb or less. Are the full-sized masters held elsewhere, and if so how can I get to them. You've guessed I'm a newbie - just 2 months with Apple and I'm very confused - any advice would be gratefully received.

You should probably have this thread moved to the Aperture Discussion group and you’ll find lots of useful tips in the threads there:
https://discussions.apple.com/community/professional_applications/aperture
Are you looking at these sizes within Aperture using the metadata view or inspecting them outside using the Finder and Show Package Contents?
I am wondering how you are importing the pictures from your camera? When you import from your camera, the right side of your display window will have a lot of options that you can select to grab your images from the camera.
Does your camera shoot RAW+JPEG? If so, you may not be importing them correctly and only picking up the JPEGS. You can import them so they stay together or separate them. The master images are all at the Project Level whereas the views you see in Albums for example are aliases that point back to your Project.
Here’s a good Aperture web site (I have no financial or other interest in this site) to help you using Aperture:
http://aperture.maccreate.com/
This article talks about RAW and JPEG images:
http://aperture.maccreate.com/2011/05/24/matching-raw-files-to-jpeg-pairs-in-ape rture-3/

SNP PPM Generation from PPDS PPM - Time less than 1 sec. in snp bucket con

Dear All,
Request immediate help .
(a) My PPDS PPM have time elements less than 1 seconds towards processing time and there are operations without a set up time .
(b) While converting such a PPM PPM into an SNP PPM I get an error of bucket consumption as SNP cannot convert less than 1 second into a daily bucket .
(c) I have to maintain the base qty in BOM and Routing as 1 unit hence cannot increase the same .
(d) Is there a way in which SNP PPM can be generated from a PPDS PPM wherein the PPDS PPM has only a processing time of 1 second and no set up time .
(e) Infact I have tried to convert the PPDS PPM with a time of 1.5 seconds but now I have lot of products where the routing suggests a processing of less than 1second and no set up . This is leading to a PPDS PPM of time less than 1 second and SNP PPM is not getting generated as guess it cannot convert a PPDS PPM with less than 1.5 seconds in a day .
Would appreciate a quick response .
Thanks and Best Regards ,
Prashant Kumar

Hi
Firstly, can I ask why the base unit has to be 1, this seems a strange restriction?
If it has to be, then two possible solutions:
1) In the CIF enhancement CIFPPM01 you could multiply all values by, for example, 100 to give you larger values in the PP/DS PPM in APO and hence of a size that SNP conversion can cope with.
2) In one of the BADI's /sapapo/ppm_calc or /sapapo/ppm_gen you can do the same conversion factor if the PP/DS PPM has to also be 1 unit.
Hope this helps
Ian

When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

My iPhone just goes dead. It's not low on battery and this is the second one I have had do it. I have a 4s less than 4 months old. Anyone else?

This is the second iphonev4s I have had to just turn off and can't get it to cone back on. I charge them to make sure it's not battery but they still won't come on. The first one did it within 30 days so they replaced it. My current one I have had less than 4 months. Anyone else?

Unless you have another USB cable, and if that fails another computer to test the connection with, then I'd suggest you take the phone into an Apple store.

I do not have a custom ringtone folder in my iphone 5. I have gone to settings ringtones and there is no folder. In iTunes I have created the file and changed to M4r. The song is less than 20 seconds. I have synced my iPhone with iTunes but no folder.

How do I make a folder in my Iphone 5 for custom ringtones?
I have made it a m4r file that is less than 30 sec. Synced phone with the latest version of iTunes. They show up in itunes as custom ringtones but there is no folder on my iPhone 5. Thanks!!!

ping209 wrote:
Yes it is> Does that make a difference?
Yes, it has to be smaller than 35 seconds.
Enjoy your ringtone.

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

Photoshop CC 2014 stops working after less than 30 second and shuts down

I have installed and uninstalled Photoshop CC 2014 three or four times via Creative Cloud and each time it stops working after less than thirty seconds and shuts down the program. I then installed a an older version of Photoshop CS5.1 from a CD and it works perfect. I also have Illustrator CC 2014 and Lightroom 5 installed from Creative Cloud and both work flawlessly. What can I do to get Photoshop CC 2014 working?

You have not provided any system information or crash logs, so we can't really know.
http://myleniumerrors.com/working-with-your-operating-systems-tools/
Mylenium

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened.

I just downloaded the trial of Photoshop. Every time I try to open it, it comes up with an error message and closes less than 5 seconds into being opened. Does anyone know how I can fix this? I tried rebooting my computer and reinstalling photoshop. Thank you!

i7 is quite fast. that's what i am on too. You may need to
It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool". (see Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 )
The order varies depending on your individual needs:
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Did you already try "uninstalling and re-installing"? Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html or
Det finns också ett svenskt språkiga chatt. http://helpx.adobe.com/se/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.

Skipping track after less than 1 second

I have downloaded iOS7, and I tried to delete some track from iTunes that I never listen to. Somehow, several of the songs on my iPhone have now started to skip onto the next track after less than a second of playing. I can still play the songs from iTunes on my PC, so I seem to have done something with the phone and I don't know what! I changed the settings from 'Phone' to 'Library' in the 'shared' music menu - I think that's what caused the problem, as now it seems fine having just changed it back. It's so frustrating that you can't get rid of music you don't want on your phone! There must be a way of doing it without shelling out for Match.

Do you have a circle with a red square next to some of your songs in your music app on your phone?

Warning screen pops up for less than a second then disappears

After I upgraded to Mountain Lion, occasionally a warning screen with the yellow '!' pops up for less than a second then goes away. What does trhis mean, does anyone else have this problem?

Never seen it - never heard of it. Does it popup while you're using any particular application? Is it like a dialog box? It could be some third-party application trying to warn you... about something.
Clinton

Pictures shown less than 0,1 second?

Similar Messages

Maybe you are looking for