Pictures that i print from my I-Mac print too Big?
When I go to I-Photo and attempt to print to my HP-7210 printer it prints the photos bigger than the paper. In other words you some of the picture in the original picture on the monitor. Normally loosing a small amount of the print is not a problem but I am printing screen captures from my I phone and part of the print I would like to have is lost because the printed picture is probably 9x11-1/2 and the text outside of the border is important.
Can you tell me how to print i-phone prints so the picture is all on the paper.
Hello,
Different Printers will have different choices, some even on the printer itself where you put the paper, but in iPhoto look for settings like this when the Print Dialog opens...
Or under iPhoto's File>Page Setup menu item...
Similar Messages
-
How to print from linux to Mac printer using cups - password?
I think that I have done the correct things to share my printer from my OS X 10.4 Mac mini (my MacBook is happy to print on the Mac mini printer), and my Ubuntu Linux computer seems to be ready to print using cups. Linux can see the printer on Mac mini, but when I try to send a print job the Mac refuses access. I assume the problem is that the Linux computer needs to send the Mac a password, but I don't know how to do that -- where in the sequence of information coming from the Linux computer the password should be, what format, how to get the Linux computer to send the info through lpadmin or the GUI. All that.
Can anyone help? Preferably with step-by-step instructions for the complete idiot. I have seen FAQs on printing, but there is no information about passwords. And most are focussed on smb rather than cups.I use linux and print through the Mac - but I don't have the trouble you are describing.
There are 2 places to enable print sharing on Mac - have you done both of those?
What protocol are you using - the easiest for CUPS is IPP (port 631). I have an Ubuntu computer at home - describe exactly how you add the printer and I'll be able to follow through. -
I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?
Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins. -
Page margins can be adjusted from the page setup menu in the Windows version of Firefox, but there does not appear to be an equivalent menu in the Mac version.
Hi onlyhuman2-
I'm not familiar with the printing options using Windows. I've found this article on editing print options for a Mac: [[Printing a web page]]
That shows you how to shrink the page, and to edit page headers and footers. I'm hoping that covers the margins you were hoping to change.
Good luck! -
I am trying to print from iphoto to my printer. When I click print on under File tab it says that a theme cannot be found and that a theme needs to be intalled? Why is this window popping up and how I install a "theme" on iphoto?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List. -
I had backed-up my iPhone and when I try to restore it it says that the back-up is corrupt or the iPhone is not compatible. I had a bunch of pictures that I need from that restore. Is there any way to get them back? I did the back-up to my Macbook
If the backup is corrupt, there is nothing that can be done.
For what reason did you choose to not copy the pictures off the device to a computer prior to attemping an update or whatever caused the need to restore? iPhones are not intended as sole storage of any media. -
When i print from internet it only prints a blank document
when i print from internet it only prints a blank document.....whats up with that?
Neither of your posts answer the question What Browser are you using. Those are the OS version of the model of Mac you have.
-
When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?
Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem. -
Can't get ipad tp print from my cannon MG4250 printer need help please?
here is canons guide
http://www.canon-europe.com/Support/Consumer_Products/products/Fax__Multifunctio nals/InkJet/PIXMA_MG_series/PIXMA_MG4250.aspx?faqtcmuri=tcm:13-957992&page=1&typ e=faq -
Try print from Microsoft Word XP : printer (HP Oficejet 4500 G510n-z) lops off top of random lines
try print from Microsoft Word XP: printer (HP Officejet 4500 G510n-z) lops off top of random lines
CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
Now what? -
When I print from PE 13 it prints 1 partly 2-5 blanks
When I print from PE 13 it prints 1 partly 2-5 blanks and one good one. When I print from another program no problem. My printer is brand new Epson XP-860. Any help would be great, THANKS.
Has anyone had this problem?
-
If I copy from the internet and paste to libre office it prints fine
When I try to print from firefox my Hp printer green lights starts blinking quick. indicating ready. But status bar stays "pending..."
When I go into system check printer test page prints as it should.
This only happens with Firefox!See this answer. <br />
https://support.mozilla.com/en-US/questions/816333#answer-176136 -
I keep hearing that I can't email videos from iphoto because they are too big. What I don't understand is that I have emailed videos via email in the past. Why is that?
Look at your settings iPhoto>Preferences>Accounts
and make changes here or add your email account if not in the list
One thing to look at for sure is the SMTP sever name, I think by default it fills it in as smtp.me.com or some such, which may not be your email outgoing server. -
How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?
Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha -
Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but
Making a interactive PDF from indesign, but it's too big. Tried to reduce file size in Acrobat, but it does not reduce file size.
Use the Optimize PDF command in Acrobat, it gives you more control. I think it's under the Advanced menu in Acrobat 9 Pro and File > Save As > Optimized PDF in Acrobat X Pro.
You might try playing around with different settings. You can also click the Audit Space button at the upper right to see if its from images or other things causing the file size problem.
Unfortunately, InDesign doesn't write interactivity in a very optimized way. You get better results with buttons, for example, creating them in Acrobat Pro and using the Duplicate command to duplicate them across multiple pages.
Maybe you are looking for
-
Problem with correlation on QA systems
Hi all i need help!!! I have a problem with correlation on QA systems!!!! I have exported file (SCVW and CS) from DEV system and imported into QAL system! I ve changed the parameters of CCs!! But messages on sxi_moni doesn't meet correlation!!!! The
-
ABAP Runtime ERROR Error Code & Syntax Error in program SAPLSFES
Hi, I am installing SAP XI 3.0 and as part of that I have installed the ABAP and Java WAS. I am applying SPs for the ABAP stack and I successfully applied the BASIS SPs 10 and 11(applied seperately). I was applying the SPs 12 and 13(together) and aft
-
Dear All, We have created one import PO. There are materials which are excisable .We have maintained the condition types H edu cess on CVD ,Addnl duty,IN basic customs ,IN CVD ,Edu cess on CVD ,Sec Edu cess on BCD,Ed cess on BCD in cond
-
Able to set score in Contains?
Hi, I'm currently working on enhancing an existing search screen which uses the CONTAINS function. Besides doing a general text search the user can enter in document numbers or ranges of document numbers that trigger both a general text search and a
-
Open a file directly!!!!!!!!!!
Hi, i obtain the link to a file that i need to open. Now, i want to open the file directly. There is some method that can get the link and open it?? I will appreciate some ideas. Thanks Michel