Pictures to big for mms

I've been an iPhone user since they came out and switched to the S4 last week. So far I'm doing ok with it but I have one problem that is making me regret my decision. I was trying to send to pics and I kept getting a message saying the picture file I was sending was too big. It was one picture!! It doesn't happen and I'm taking all my pics the same. Not adding any filters or nothings, they are straight from the camera. How can this phone not autosize to allow mms.
What should my settings be so that this doesn't happen?

Hello and happy Sunday odogmtz,
First, I would like to thank you for bringing this to our attention via the forum. I must admit, this topic has came up quite a few times. The reason for the message is because the s4 has an amazing 13MP camera, of which can't be found on most wireless devices. May I ask what type of picture did you take? For example, panoramic photos may get this issue when sending. Also, if you are using graphics or a 3rd party app then you can run into this error. As you share the details of how and where you are sending the mms to then we can look into this deeper for you.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

How to make a picture realy big, for using on a truck, without losing quality

picture size is:
939 x 1000 px
300 dpi
when i want to make it bigger so i can put this picutre on the side of a truck, but now it wil lose quality.
how to fix this ?

This took me ten minutes almost entirely done with Eye Candy 7 plus some layer styles and Free Transform. I didn't put any cracks in the wood, but that's easy to do (4000 pixels wide)

Help! pictures too big for layer

When I add a photo to a new layer in elements 9, only a tiny bit of a corner shows up, and it fills the entire space! What do I need to do to have the whole photo appear in the layer?

Unfortunately, I do have a very good idea of my awesomeness!
Glad to help.
Ken

I have a big problem. Every time i lock on for example Facebook, the picture is big in 2 secundes and the it's gets small. Please help me.

I have a big problem. Every time i lock on for example Facebook, the picture is big in 2 secundes and the it's gets small. Please help me.
<Email Edited by Host>

Hi Frank,
Which Browser, & do you have a screenshot of the problem?

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible. Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

What is the best way to record a video(not big) for free on a mac w/isight?

What is the best way to record a video(not big) for free on a mac w/isight? I need to just make a short (less than 5 minute, no special effects) video, but I can't figure out any programs that will make this possible for me.
Thanks.

Hi Carolyn,
you can use iMovie to record a video for free on a Mac with iSight.
1. Open iMovie HD
2. Choose “Create a new project”
3. Name the project for example “iSight Movie” (first field). In the second field, let the default location “Sequences”, in the third one, video format, choose “iSight”. Push “Create”
4. iMovie window opens, next to the scissors, choose the camera (Camera mode), then iSight. Now you appear on the screen, right?
5. Press “Record with iSight” in the main picture window.
6. Press the same button to stop. Your new clip appears now in the clip panel at the right.
7. You are done!
iMac G5 PPC 2,1 Ghz Mac OS X (10.4.8)

720p display resolution is too big for tv

I recently got the kanex hdmi adapter to hook my mbp to my tv. The quality is superb and sound is good as well. However, the picture is slightly too big for my size of television. I had to select the 720p option so that my tv could recognize my computer and therefore, I cannot select any other option if I want my tv to recognize my computer via hdmi. Is there any possible way to still be able to hook my computer with my kanex adapter and still be able to fit the full picture on my tv screen?

Not sure if you fixed this problem but my Sanyo has a Pixel shape button that I accidentally pressed somehow. Somewhere in your T.V. remote or menu should have the same type of button or menu option to change the way your pixels are layed out.
This option will give you a 4x3 option, a 16:9 option and a few 16:9 zoomed variants.
It's probably not in your OS X settings. You have accidentally switched your pixel shapes.

Scanned doc now too big for print

Hi,
I have scanned this sheet and modified it, now i need to print it back but photoshop says its too big for print.
Indeed it just printed a portion of it.
Can someone with experience of this kind of issue explain me the technicalities and what should i do?
I know photoshop only when it comes to chop pictures, put loads of filters and make them jolly, i am not into stuffs like scan/sizing/printing, etc., so please don't explain to go down to the basic basics in your explanation.
Thanks

Well, when you say "Manufacturer's software" I assume you mean the scanner's software and NOT Photoshop. It is best to scan directly into Photoshop by using the menu File>Acquire Image>[select your scanner source--either the scanner name or TWAIN driver]. When this is chosen your scanner's driver will launch a "plug-in" software interface that will allow you to scan the document and set a marquee around what you want to scan and also choose the resolution. After that you will be able to save the document -- give it a unique name like "file.psd" -- and then make changes -- again give it a unique name like "file_edited.psd". The document measurements you gave us seem to fit within the bounds of a United States (US) Letter size document which is 8.5 inches x 11 inches. If your printer has the ability to print borderless documents you should be able to print this document without a problem with a resolution of 300dpi. It is possible that it would not be able to if there is not enough memory on your printer and that is why you get the error message. (But as a JPG image the file size will be compressed, so I'm not really sure why your document would be too large.)

Adding photos to Pages document becomes to big for email

Hi all,
I want to use the Ipad with pages to make survey reports. But after adding pictures the document becomes to big for email.
Anyone know a way to solve this?
Thanks!
Jake

1 - are you able to view full size in iPhoto the photos that give you that message when trying to add to Pages?
2 - are you using the Media Browser as Larry suggested?
OT

Picture too large for 20" Flat Panel display

Mac Pro, CTO 2 x 2.66 Ghz dual-core Intel Xenon with 20" flat panel display.
Running OSX 10.6.3
All of a sudden, yesterday, the picture became too big for the screen. Bottom, top, and sides of display are all off screen. Moving cursor to edge moves the picture so that you can get to edge of picture. Display enlarges after login. I have had windows hide the top menu bar so that the menu bar can not be accessed. I have had windows get so large that the red, yellow, and green buttons could not be accessed as well as the resize location at bottom right. Had to shutdown by holding down the on button on the computer. The resolution of the monitor is now lower. I am using 1680 x 1050 resolution, but changing to lower resolutions does not solve problem.
Is it a software problem, or is the monitor going bad? What can I do?

That fixed it! I had forgotten all about that feature. I must have done it accidentally with the mouse. Thank you very much!

PC - TV [Video too big for TV Screen.]

Hi,
I'm running Windows XP with an FX 5200 128 Video Card. I have an S-Video plug that turns in to a Yellow RCA wire and plugs in to my TV. I have my display properties set to "Clone".
When I play a video using Windows Media Player, I can see it on my Computer Screen as well as my TV.
However, the picture on my TV seems to be slightly cropped. It looks like I am missing the TOP and SIDE portions of the Video. The video fills the entire TV screen, but it looks like the picture is too big for the TV and I'm not seeing the edges.....
Any suggestions,
Thanks,
Andrew.....

make sure you're using the correct display drivers from nVidia Drivers
then in the driver control panel for your TV settings, use the zoom controls to adjust how the picture looks on your TV

How to add pictures in CCM for items in SRM_EXTRAXTED_CATLG

Hi guys (and girls of course),
Best wishes for 2007 for all of you.
I've got following issue I've been struggling with: I'm trying to add a picture to items in CCM, but for items coming from R3 (replicated to SRM). I want to use the standard PICTURE/URL field for this ('complex' data type)
(procedure for uploading R/3-materials is currently already working)
I've been checking out following BADI's:
<u>/CCM/IF_EX_CTLG_ENRICHMENT~ENRICH_ITEM</u>
I have found an example for implementing this in another thread and this seems to work for 'simple' characteristics, eg /CCM/CONTRACT_ID as mentioned in the example)
<u>IF_EX_BBP_CCM_CHAR_MAINT~VALUATE_PRODUCT</u>
for additional customer-characteristics this works fine, also for simple standard characteristics (eg /CCM/MPN) this works fine.
But in both cases i seem to be unable to fill the complex characteristic /CCM/PICTURE (subfield /CCM/URL). I tried to use the same syntax as in the CSV-load file (ie /CCM/PICTURE#/CCM/URL) but it's not working as i expect.
When i add this info manually to the field, the picture shows as expected. (But adding this info manually is not an option of course.)
Any thoughts or hints would be greatly appreciated.
Some additional information
SAP_ABA     700     0009     SAPKA70009
SAP_BASIS     700     0009     SAPKB70009
PI_BASIS     2005_1_700     0009     SAPKIPYJ79
ST-PI     2005_1_700     0001     SAPKITLQI1
SAP_BW     700     0009     SAPKW70009
SAP_AP     700     0006     SAPKNA7006
CCM     200_700     0005     SAPK-27005INCCM
SRM_PLUS     550     0006     SAPKIBK006
SRM_SERVER     550     0006     SAPKIBKT06

Hi ,
I was not active on SDN for some time hence did not see yr thread.
We had used SRM_EXTRACTED_CATALOG in our earlier project and managed to get pictures for all the items in shopping.
The path we took:
with the report BBP_CCM_TRANSFER_CATALOG get the SRM_EXTRACTED_CATALOG in CAT
map the relevant categories in SRM_EXTARCTED_CATALOG to /CCM/MASTER_CATALOG.
import all the picture JPEG files for all the items in the MIME of server
SE80->MIME repository -> drill down to BSP/SAP/BC/CCM (sorry i don't remember the exact path and I don' t have the system now) -> create yr own folder-> import all the JPEG files to this folder.
now derive a URL for each item in a format: http:
server name.domain name\services (sap\bc\bsp\cat\yr folder name\file name)
validate this URL in IE
it should derive the picture from the MIME of yr server and show you on screen
now go to mastrer catalog ->open the chara "image" for each item -> paste this url and type (JPEG) -> and save the item
this should give picture of each item when you are shopping in EBP as preview and in detail also
it's somewhat cubersome to paster those URLs but it's one time activity.
Helpful?
BR
Dinesh
reward if helps

When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

I have the exact same problem, I think. I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE. So big I could only see one or two icons. I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar. I finally just had to wait for the battery to die, then recharge it, and it looked normal again. I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them. I checked my accessibility settings, and Zoom was already off. So what is causing this problem for so many people, and what can we do to prevent it? Please help.

I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. I want to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere? Also is it worth just buying another external HD to back up

I have my iTunes library on an external HD because it is too big for my iMAC 500GB HD. However, it is not backed up, so I need a solution to backup my external HD. Can I do this with any Apple cloud product or should I look elsewhere for cloud products? Will it be cheaper/easier just to buy another external HD to back up my existing external HD? Thanks

I don't know if this is me adding files to iTunes when the external wasn't connected
it is.
is it OK to just keep deleting that library on the Air?
i wouldn't - at least not until i
mount the external
point iTunes media folder location back to the external via preferences > advanced
consolidate my library via file > library > organize library
The ntfs hasn't seem to be causing any problems, but I've always wanted to know.
in order for your Mac to write to NTFS drives, it needs some help by installing e.g. the NTFS 3G driver. apparently that or something similar is installed on your Mac already. preferably, it would be formatted for Mac but then windows machines would need to have e.g. MacDrive installed to recognize the drive.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menues, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.

After navigating (sometimes downloading pictures, sometimes not) for approximately 10 minutes, I can no longer see contents of drop down menus, then Firefox freezes up and I have to use Ctrl/Alt/Delete to end my internet experience.
== This happened ==
Every time Firefox opened
== After upgrading to 3.6

Step by step, how did you arrive at seeing this agreement?

Pictures to big for mms

Similar Messages

Maybe you are looking for