Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Pictures will load to the photostream just fine, i can see them on both my ipad and iphone, but they stoped uploading to my PC 10 days ago? I can not get any new pictures from my iphone to my PC, what can i do to fix this?

Sign out of the iCloud control panel and then back in.

Similar Messages

  • Is the iPhone alarm supposed to sync with iwatch?  I can't get any alarm notifications from my iPhone to my watch. Do I have to just set up whole new alarms specifically in my watch?

    Is the iPhone alarm supposed to sync with iwatch?  I can't get any alarm notifications from my iPhone to my watch. Do I have to just set up whole new alarms specifically in my watch?

    Yes, they should sync. Check the Watch app on the iPhone and look at Calendar - make sure it's set to Mirror my phone
    If it still doesn't work, reset the Watch, restart the phone and re-pair the Watch - fixes a few glitches

  • My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info iPa

    My husband and I both have iPads and somehow when they were setup the both we're setup using the same email I'd address. When I go to delete and rename one iPad it says all info and pictures will be erased from my iPad. Is there a way to keep the info IPad when doing this?

    You can go to Settings/iCloud and delete the account, then create a new iCloud account.  You can still use the same account for the app store though.

  • No Mail. I can not get or send mail from my iPhone,iCloud, or mail  on the desktop. Password is correct i can get into iCloud but not able to get mail.

    I can not get or send mail from my iPhone, iCloud, and desktop mail.  All are the same account, password is right and working. When the problem first happened I updated to a new  password.
    The Mail and the phone are telling me ( "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “k****n******2”}
    From the iCloud account i get a message saying  mail could not be loaded and the details. Which i have copyed below.
    Any thoughts or anyone I can ring ? This was a paid for mobile me account.
    Thanks
    Running 10.72
    ORIGIN
    server
    TYPE
    error
    BUILDNUMBER
    1FCS29.34215
    TIME
    Sun Dec 11 2011 10:49:50 GMT+0000 (GMT)        (1323600590380)
    HOST
    www.icloud.com
    USERAGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7
    PRSID
    217870346
    RECENTLOGMESSAGES
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: MAIL in main()
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -->  Request 1:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Object:sc1074:dispatch('load content')
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Attempting to load 'addresses'
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Object:sc3099:initStatechart()
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -> entering "9 Address List Not Visible"
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: -->  Request 2:   GET to https://p03-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' finished loading.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
    Sun, 11 Dec 2011 10:49:22 GMT:  DEBUG: APPLICATION: Received applicationWillBecomeActive
    Sun, 11 Dec 2011 10:49:23 GMT:  WARN:  APPLICATION: Received applicationDidBecomeActive
    Sun, 11 Dec 2011 10:49:23 GMT:  DEBUG: <--  Response 2:  200  (1257ms),  headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8  body: (omitted)
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: -->  Request 3:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:25 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:2
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: -->  Request 4:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:29 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:3
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: -->  Request 5:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:33 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:4
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: -->  Request 6:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:37 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:5
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: -->  Request 7:   POST to https://p99-mailws.icloud.com:443/wm/preference,  headers: Content-Type=text/plain,  body: (omitted)
    Sun, 11 Dec 2011 10:49:40 GMT:  DEBUG: Request out: /wm/preference-list-->1323600562085/1
              params: {"locale":"en-us","timeZone":"Europe/Dublin"}
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: willReceive: Status:500, Request:/wm/preference
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: <--  Response 7:  500  (4248ms),  headers: Content-Type=text/html  body: (empty)
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: Request in: /wm/preference-list-->1323600562085/1,500,4249ms
    Sun, 11 Dec 2011 10:49:44 GMT:  DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/500/guid=serverPrefsGuid
    Sun, 11 Dec 2011 10:49:44 GMT:  ERROR: CoreMail handled error 13002 before exiting Mail

    Spent at least 40 min talking to apple support, to sort it out. luckly not at my cost. After trying lots of things and speaking to a higher grade support person I was given a temp password which did the trick. I then was able to reset that with my own password. 
    The impression i got was no one knowns  what the problem is and resetting the password at the apple end works. Not sure if you would be able to self fix.

  • TS1424 I redeemed a $50 iTunes card two days ago, I have not made any purchases and now the credit has disappeared from my account? How do I get it back?

    I redeemed a $50 iTunes card two days ago, I have not made any purchases and now the credit has disappeared from my account? How do I get it back?

    CHANGE THEME'S, WORKED FOR ME

  • HT3819 Bought new iMac & moved (or thought so) music from old PC to new Mac. Now several hundred songs are orphaned on old PC; , I can "see" them with both machines turned on & iTunes open. "Missing" songs show in iMac Shared folder. How do I move & retir

    Bought new iMac & moved (or thought I had) all of my music from the old PC to the new iMac. Have discovered several hundred songs are orphaned on old PC; I can "see" them with both machines turned on & iTunes open. "Missing" songs show in iMac itunes Shared folder. How do I move them all so I can then & retire the old PC?

    From things you are saying, such as "shared folder" and having both machines on, it doesn't sound to me like you truly moved the whole iTunes collection. 
    iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    do not confuse moving your whole folder and library with moving just media files as in
    iTunes for Mac: Moving your iTunes Media folder - http://support.apple.com/kb/HT1449
    Quick answer if you let iTunes manage your music:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Start iTunes with the option key held down and guide it to the new location of the library.
    Macworld - How to transfer iTunes libraries between PC and Mac - http://www.macworld.com/article/46248/2005/08/shiftitunes.html

  • Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?

    Hello!, I´m new using apple products. I added som pics to My Photo Stream/Uploads on Windows and only appear on Apple TV. I want to see them also in my iPad and iPhone. What I need to do?

    Set up the same iCloud account in Settings>iCloud, then turn photo stream to On.

  • TS1424 I keep getting unable to gift from ITunes Store try again later what can I do to fix this?

    I keep getting unable to gift from ITunes Store try again later what can I do to fix this?

    Hi Nanas12,
    Thanks for visiting Apple Support Communities.
    If you continue to see an "unable to purchase" message on the iTunes Store, I recommend the troubleshooting steps in this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Cheers,
    Jeremy

  • HT201317 My photos are not on my computer but i can see them on both Iphones

    My Photos are not on my computerm, but i can see them on both iphones

    Welcome to the Apple community.
    If you are referring to photo stream, do you have photo stream enabled on your computer.

  • Some of my apps on both my iPad and iPod Touch no longer have sound.  Others still do.  Checked general settings.  Any other ideas?

    Some of my apps on both my iPad and iPod Touch no longer have sound.  Others still do.  I checked general settings.  Any other ideas of how to fix this?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • When i download music from internet it is not shown in my phone's music library....what should be done to fix this?

    When i download music from internet it is not shown in my phone's music library....whenever i want to listen that music i have to open that application through which i have downloaded it. What should be done to fix this?

    you can only get music to work if
    1. it was downloaded on the itunes app in the iphone
    2. it was synced from itunes on a computer
    downloading files does not work

  • Not getting any signal out from the NI9472 cRIO

    I want to generate PWM signal from the NI9472 in cRIO.
    I made a vi which (I think) should generate the pulse in the DO0 port.
    but when I measure DO0 with oscilloscope, I get nothing out from it.  (The LED comes up in NI9472 that channel 0 is active)
    Is there anything I am doing wrong here? (I attached the project and block diagram in jpg)
    Thank you so much.
    Attachments:
    PWM.zip ‏100 KB
    121.jpg ‏54 KB

    Hi hinewwiner,
    Overall, your implementation looks good. I think it might be worth your while
    to look at two other examples of PWM I found on our website which may be more
    efficient and more accurate. Another important thing to not about the 9472 is
    that it must have an external power supply connected to it for any output to occur.
    If you do not have any supply, the channel may be switching (and thus the
    channel LED will show activity,) but you will not see any change in output
    voltage. Also note that the LED should be off when the channel is not switched,
    and on when it is switched. So if you run your PWM at a slow enough speed, you
    will see the light turn on when the pulse is high and off when the pulse is low
    (at the rates shown in your attached project, your eye will probably not be
    able to discern a change.) It may also be helpful for you to describe exactly
    what the LED is doing to get a better idea of whether the code has stopped in a
    channel closed position, or if it is simply changing very fast.
    Another slight possibility is that the unit has experienced an over current
    condition. Because the module has automatic over current protection, if it is
    exposed to a current greater then 13A, the unit will open the channel switch
    and wait for a reset. This may have occurred, and the activity light will still
    show normal operation. To ensure that this condition is removed, simply reset
    the channel, or disconnect and reconnect the external power supply.
    For testing purposes, it may also make sense to simplify your VI by removing
    the case structure, start button, stop button and outside while loop. You can
    then simply start the VI in your real time controller, and stop the VI using
    the abort command given in your real time code.
    Here are two great resources for creating PWM functions in FPGA.
    Developing a PWM Interface using LabVIEW FPGA
    Pulse Width Modulation Example DAQ Personality
    Sincerely,
    Asa Kirby
    Applications Engineer
    National Instruments
    Message Edited by Asa_K on 05-20-2008 12:22 PM
    Asa Kirby
    CompactRIO Product Marketing Manager
    Sail Fast!

  • My hard drive crashed, tons of songs on my iphone 5 and can't add new ones from PC without completely erasing it, what can I do?

    My hard drive recently crashed and I cannot recover it. I have a new hard drive and have re-installed iTunes, I have authorised this PC already and I used to have my iphone with "manually manage music", now I can't add nor set "manually manage music" to my iphone without having to erase it, I don't want to have to erase my iphone and have to re-download everything. What can I do? I have very slow internet and it will take weeks if not months to re-download all of my stuff/apps/songs again.
    Will backing it up, erasing it, then restoring it again fix this? Will I still have to download my songs/apps again? Will it even let me back it up since I have to erase before syncing with this new pc?

    rodolfovaldez17 wrote:
    My hard drive recently crashed and I cannot recover it. I
    See these 2 Links...
    Recovering your iTunes library from your iPod or iOS device
    https://discussions.apple.com/docs/DOC-3991
    Syncing to a New Computer...
    https://discussions.apple.com/docs/DOC-3141

  • HT1473 i am not able to add mp4 file to itune.What may be the issue.While adding mp4 file i am not getting any error message from itune.Please help.

    I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

    I am not able to add mp4 or mov files to my itune.itune is also not throwing any error message,I am bit confused.Which formats of video file can be added to itunes??I have itunes of 11.0.2.26 version and iphone 4s-6.1.3 version.

  • Embedded pictures in g-mail do not get thru when forwarded. Google claims it's a browser problem. how do I fix this?

    I'm running Windows 7 Ultimate, Firefox 3.6.16
    This problem started up about 4 months ago. I thought it was a Google problem, but Google claims it's a browser problem. The same problem happens with Internet Explorer. I checked the Google website and many people are having this same problem. And Google is totally unresponsive.
    Attached pictures go thru fine, but if I get an e-mail from someone with embedded pictures in the message, when I forward that message, the receiver does not get the pictures...only a red X in a blank box.
    How can this be fixed?

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

Maybe you are looking for

  • Cannot install Acrobat  9.0 Pro

    I am trying to install Acrobat 9 pro trial version. When it's on the 99.96% the copy utilty pops up, saying something about my printer (epson) and the installation will stop. What should i do???

  • Where is the IdeaPad "G" series in this forum?

    Hi, I'm looking for a sub forum for my new laptop, but I don't find it here, are you sure that the G series (I have an IdeaPad G510) is really a Lenovo laptop? or some fake?! It sure looks like it by the quality. Or this is the quality of your laptop

  • How can I get rid of Global Temp Table

    Hello, I've been writing PL/SQL stored proc for creating reports on VB.NET front end. Until now, I've been using session specific global temp table to store intermediate results and at the end I pass the result set to .NET via reference cursor. The r

  • Emailed PDFs automatically opening

    I've got a problem where, if I email PDFs to my gmail account and open them in mail on my iPad, it's automatically opening some of them (not all) in the message body. This is fantastically annoying, as I then don't get the option to open them in a se

  • WARNING! Your Flash Player may be out of date. Please update to continue

    Can someone please help me. I have contacted Mac support 3 times and no one can help me and was recommended I go onto this forum. I keep getting a pop up on my Mac, Macbook Pro, iPhone 5 and another MacBook we have in the house. It says "WARNING! You