Pictures will only partually display on stage or not display at all.

Sometimes this happens.  At other times nothing will display at all.  I have also had a portion of the picture duplicated multiple times on the stage.  Does anyone know what is happening?

There is no service pack 3 for windows vista as far as i know. (only sp2)
There is a sevice pack 3 for windows xp.

Similar Messages

  • Photoshop CS6 content (pictures, etc) will not display (or only partually) on the stage.

    I just purchased and loaded Photoshop CS6.  Pictures (actually this is for all content in any layers) will not display at all or only partually display (see picture below). I uninstalled and reinstalled the program but there is no change.  The other Adobe products from the Master Suite Collection run fine (Flash, Encoder, etc).  I am thinking that my instalation disc may be corrupted.  Can you give me any advice?

    Most likely the video card driver.  Update it in GPU makers website.  Need make and model of video card.

  • My printer is Hp printer 932C it will only print in black and white not color

    my printer is Hp printer 932C it will only print in black and white not color I got a new color cartage nothing still only printing in back and whit what can i do

    There are a few things to check:
    Make sure the blue tape has been removed from the nozzle plate.
    Print a diagnostic page as shown in method 4 here.  Does this page print color?  If so the issue may be your driver settings.  Check for a "Print in grayscale" setting and uncheck this box.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Images on facebook randomly will either open, half open, or do not open at all. This only happens when I am in facebook. My computer is Windows 7 - 64bit

    When I try to look at my pictures or friends pictures, the pictures will do various things. They will either load, load half way, or not load at all leaving a black space where the picture should be.
    I am running a newer computer with Windows 7. This is a 64 bit computer. I used to be able to load pictures on facebook easily and with no problem, but for the past couple of months I have been having the above problem. I subscribe to photography websites and they load easily and they are much bigger files, so this has to be a problem with FF and FB.
    This happened ... when ever I visit FB and try to look at pictures. My answer isn't one of the options given below.

    If images are missing then check that you aren't blocking images from some domains.<br />
    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Check the permissions for the domain in the current tab in Tools > Page Info > Permissions<br />
    Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    There are also extensions (Tools > Add-ons > Extensions) that can block images.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

    I lost my iphone, got a new sim card and put it in my boyfriend's old iphone. When I synch it in itunes it will only synch with his stuff and not mine. Any ideas how I can get it to synch with my itunes??

    Are you using a Mac? It sounds like you are using his computer to sync to. If this is the case, then it will sync to all of his stuff unless a new user is created with your personal stuff on it.
    When you want to sync your iPhone to that computer, switch to your user first, and then everything will sync with your stuff. If he wants to hook up his iPhone to sync it, then he needs to switch back to his own username first.

  • HT3529 my iphone will only send iMessages. I can not send messages to other types of phones. Does anyone else have this problem?

    my iphone will only send imessages. I can not send messages to other phones.  Has anyone else had this problem?

    Check with your cell provider and make sure your texting plan is properly provisioned.

  • I have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    i have purchased adobe pdf pack so i can delete some text from my converted files, this will only let me add text but not delete any, please help

    I tyhink that you need ExportPDF, Adobe ExportPDF (read only). In any case, thius may help: Cancel your membership or subscription | Acrobat.com online services

  • Picture files only partially display after being published

    Recently .jpg and .png pictures I have created only partially display after being published.  I've tested it using Paint, Publisher and Gimp with mixed results. The pictures display correctly when I view them locally on my pc.
    Here are the test pictures I made in each program:
    http://www.bgchamber.net/images/GimpTest.jpg
    http://www.bgchamber.net/images/PublisherTest.jpg
    http://www.bgchamber.net/images/PaintTest.jpg
    The only pictures that fully display are those that were taken from a camera, but after I resized one in paint, it also didn't display properly. My question really is, is this an issue with Microsoft Expression Web or with the server hosting the files?

    Publisher is NOT a photo editing program. Neither is Word. Nor is Paint.
    You need a real, and simple, photo editing program. Paint.NET is a good, free one. I find GIMP cumbersome (but it's batch processing is handy). And your graphics aren't being created and saved properly. For example, the events.html page has graphics on it
    that total well over 3 MegaBytes! Pity the poor soul with a wireless connection. The graphics on the events.html page are largely illegible, and as such serve no real purpose (and make the site look bad).
    Let's take an example...on the home page gallery is a graphic for the 2015 Chamber Scholarship. It's displayed at 525 x 340 pixels, yet the image sitting on the server (and which must be downloaded by the visitor) is 1275 x 825 pixels. So you have an unnecessarily
    large graphic taking space on the server, having to download to the visitor's computer at full size, and then be shrunk by the browser to only 17% of the original area. That file should be created and saved in a proper graphics program at the final size you
    plan to use (and in this case, use PNG format). The larger file takes at least 5 times the storage space on the server as a properly sized file (and takes 5 times as long to download and upload).
    I've superimposed the display size on top of the full size and shrunk them down to display here in the forum. See below.
    All the graphics that I have checked on your site have the same problem, and if your site has been up a long time and you haven't cleaned out the old files on the server, you may have run out of server space, which would corrupt the new files.
    Smaller files will also upload faster and more reliably. Plus--browsers stink at resizing graphics. Do that in a proper graphics program to get the best quality.
    Use JPG for photos, GIF for hard-edge graphics with few colors and no gradations/shading, and PGN for hard-edge graphics with full color and gradations/shading. And make sure you are saving the images in the proper version of the format (RGB for web).
    A horse walks into a bar. The bartender asks "Why the long face?"
    "Because I was born into servitude and when I die my hooves will be used to make glue."
    It was at this point that the bartender realized he would not be getting a tip.

  • IDVD will only burn to 16X discs and not 8X

    I replaced my original superdrive with a pioneer DVR-100 because it can burn at 16X speed and dual layer. Now, iDVD will only burn to 16X discs. When I try to use 8X discs I get an error message. iDVD will begin to write, the disc will spin up twice, then the disc is ejected. The really annoying thing is that it makes those discs unusable.
    Any ideas how to fix this.

    What brand DVD-R?
    I burn Verbatim DVD-R 16X at 4X all the time using a disk image and Toast (or Disk Utility). Try Verbatim. I use other brands too. In both of my "SuperDrives."
    Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
    http://docs.info.apple.com/article.html?artnum=164927
    This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
    There are variations to this process based on which OS X you are using...
    Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
    -->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
    Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
    http://docs.info.apple.com/article.html?artnum=93006

  • TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

    Note: capitals are used only to highlight important words.
    PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
    I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
    I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
    I am forced to revert to Firefox 26!
    First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
    With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
    ---FIRST CRITICAL BUG:
    When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---SECOND CRITICAL BUG:
    When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
    Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
    Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
    Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
    ---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
    I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
    Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
    Please, make it a priority to solve these two critical bugs. Thanks.
    I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
    I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
    In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

    First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
    Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
    As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
    Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
    So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
    Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
    If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
    I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

  • Hello iv recently transferred my photos to my iphone from my laptop 3600 photos but when i go to upload a photo to facebook it will only access my camera roll photos not the 3600 ones.. can somebody please help.

    Hello iv just recently transferred 3600 photos to my phone from my laptop. But when i go to upload a picture to facebook it only seems to go to my camera roll to choose a picture not my 3600 pictures.
    can somebody please help :-(

    I am having same issue! After May 14 FB update, I can't choose ANY photos from my photo library to upload to FB mobile. It's ONLY allowing me to select from Camera Roll.  It works from ipad and ipod, just not iphone 5? I used to get choices from all of my photos in Photo Library. And it has nothing to do with the privacy settings, etc that users experienced with update to IOS6. Everything is enabled and WAS working prior to may14 FB app update.  Funny thing is, on the May 13 update that FB had it worked fine.  When they did May 14 update, that was it.  I've sent and posted notices on those discussion boards too. Hopefully they will fix soon.

  • All of a sudden my WiFI will only connect with my IMac and not my IPhone or laptop

    my WiFi will connect to my IMac But not my IPhone or Laptop and it did up until a couple days ago

    You might want to consider changing the name of your wireless network on the AirPort Extreme and then test to see if all devices can connect that way.
    If you decide to do this, leave any apostrophes, dollar signs, exclamation marks, etc out of the wireless network name. Use only letters and numbers in the wireless network name.

  • Ipad air will only work with email address and not phone number

    Nobody can FaceTime me or message me using my telephone number, they can only do it using my email address, how do I get my phone number to work on ipad air

    Do you have an iPhone?
    You can only associate a phone number to messages and facetime if you have an iPhone.
    The iPhone will associate the number it has to your Apple Id which in turn will make it available to Facetime and Messages on the iPad, assuming it uses the same Apple ID.
    If you do have an iPhone, make sure you've activated Facetime and Messages on it so your Apple ID links to your number.

  • 10.7.5 will only see network drives which do not exist

    Have two external drives plugged into a Time Capsule. Would previously be able to access either or both.
    Now, after logging in only one of the network drives shows up - the one that is turned off and unplugged (appears in finder, but can not access once clicked).
    The drive that is plugged in and turned on will not show up in finder windows.
    Restarting computer and force restarting finder have no effect.
    What would cause this?

    86 views and no replies? Come on people!
    I still can't figure this USB problem out.
    Please help!
    Jay

  • Cannot print in Adobe 9 it will only print to file which does not work

    I cannot print a PDF file that is in Adobe 9.  It is not the file, I opened several other files and they all do the same thing.  INstead of printing.  When I click OK after choosing the printer, it goes into a print to file mode.  The print to file always fails and then it will nto print.  This morning it was working fine.  Now it will not print. It may have installed an update to Adobe 9, I do not remember it being 9 before.   I am in trouble if I cannot print tonight.  Any ideas?

    WHat is a "print dialogue?n  How can I find it"  There is nothing that I can find called print dialogue.
    Where do nI find "print to file in order to disable it?

Maybe you are looking for

  • Two Libraries on one computer? Is this possible?

    Hi- I am helping my parents get their ipods up and running. Is it possible to have two ipods/separate libraries on one computer? If so, do I need to download itunes 7 twice? My dad already has his library up and running on the computer and I need to

  • Help with Adobe Bridge CS6

    Before my Mac was updated my Bridge was working fine.  Now it won't open all the pictures I select for editing.  What can I do to fix the problem?

  • Outlook 2013 Issues with Connecting to Gmail Exchange

    Outlook 2013 will not connect with Gmail account on cas_array.yourhostedexchange.com server.  Error message below appears each time I try to set up the account: The action cannot be completed. The connection to microsoft exchange is unavailable. Outl

  • Prioritisation of multi day events

    Maybe this is more of a feature request as I don't know of a way to do this yet? (didn't there used to be a feature request menu item? Where'd that go?) but anyhoo, I have a number of multi day events in my iCals - say a show that last plays from Thu

  • Implementing password policie using Role and CoS

    Hy all, I have created a directory with the following partial structure (Sun directory 5.2 patch 2): ou=people,o=accounts,c=an |----- cn=user1 |----- cn=user2 |----- cn=user3 ou=services,o=accounts,c=an |---------cn=user4 |---------cn=user5 |--------