Pictures with GPS-data will not be shown in list-view (PSE 11, Win7)

A lot of pictures of my collection do have GPS-data in EXIF-header. Sometimes they are shown on the world-map, sometimes not. In list-view they are never shown. The list-view knows only locations, which are matched with PSE.
The EXIF-input was made by two different tools (Holux GPS Software and Geosetter 3.4.16).
How can I get the list-view for the saved files without using PSE adding location?

Many modern cameras add GPS co-ordinates and these will usually show in the info panel of the Media module under Camera Data >> GPS
I guess your exif tools work differently to a camera. Are you able to embed the metadata into the image files before importing into PSE Organizer?

Similar Messages

New i tunes up date will not load says have to remove old bonjour but i tried that and my internet stopped working

new itunes up date will not down load says i have older version bonjour can not be removed tried removing bonjour with revo uninstaller takes bonjour off but then my internet will not work

iOS: Unable to update or restore

Statistic report with figures that will not change when rerun months later

Hi,
Is there any good practices that we can follow to create statistic reports with figures that will not change even when rerun after few months later?
My scenario is my statistic report is generated based on data that is "alive" which means the record will get change after a period of time. So, if you generate the statistic report in for January 2006 in the month of January and regenerate in May for the January 2006 statistic, the figure is different. But what I want is to be able to get the same figures.
I know in this case looks like we need some sort of summary tables, so posting this to get advice on the best way to design such summary tables. Please comment if there is other ways of doing it.
Summary tables may work for statistic report, but how to support detail report listing where the records are required to be the same when it was generated few months ago.
Please advise.
Thank you.

What happens, when you execute a report today is the following: a select statement is fired at the data base and the result set is displayed in the report. The data can change after the moment you launched your report. What you could do to keep the result set the same, is implementing a user parameter that fills your date discriminator.

My contacts will not be shown i icloud

My contacts from my iphone will not be shown in icloud. I understand that it´s an installation problem, but I can´t understand how I will do. My contacts are in hotmail account, outlook. How do I get them to be shown in icloud?? Please help med someone. I have made a backup to the cloud, but it will not be shown.

iCloud will not sync your Hotmail contacts. If you want to sync your Hotmail contacts with iCloud, you will have to copy them to your iCloud account. To do this, do the following:
Go to Settings>iCloud, turn Contacts to Off, choose Delete from My iDevice when prompted (any iCloud contacts will still be in iCloud).
Download the app My Contacts Backup. (If you have more than 500 contacts to transfer you will need the “Pro” version.) Use the app to back up the remaining contacts on your phone (from Hotmail) as a vCard attachment to an email that you send to yourself. Confirm that you have received the email.
Go to Settings>iCloud and turn Contacts back to On.
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section) and set this to iCloud.
Go to Settings>Mail,Contacts,Calendars…tap your Hotmail account and turn off contacts syncing with Hotmail (otherwise you will see duplicate contacts on your device).
Open the My Contacts Backup email and tap the attachment to import the contacts from Hotmail back to your device, and to iCloud.

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I am running Yosemite and have just bought Pro Tools Express with the intent to Upgrade to Pro Tools 11. Pro Tools Express is not compatible with Yosemite and will not install. How can I get this done?

I have had this problem for close to a year. I have an Extreme base station, two Airport Express's and multiple G4 Mac's with up to date software. I have spent a huge amount of time trouble shooting, resetting, reapplying software and finally calling Applecare without any help. It would be great to get this problem solved.
Powerbook G4 Mac OS X (10.4.7)

My ipad screens apple picture keeps blinking and will not open

my ipad screens apple picture keeps blinking and will not open. I have tried pressing both top and bottom button together, pressing just the top, etc. and nothing...it just keeps blinking the apple?

Hello llp03,
Thanks for the question, that definitely sounds frustrating. The following troubleshooting assistant provides steps that may lead to a resolution:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
- Connect the device to your computer and open iTunes.
- If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
- If the device doesn't appear in iTunes, try to force the device into recovery mode.
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks,
Matt M.

My iphone 4 with IOS 5 will not mount in iTunes. Please help.

my iphone 4 with IOS 5 will not mount in iTunes. I think it's due to icloud but i turned icloud off on my phone. Now music in my itunes that i have ripped from CDs cannot be put onto my phone. My iPhone will charge when lugged into my mac book pro but will not mount in iTunes. Also I have Snow leopard on my laptop. Can anyone help.

I have precisely the same problem. The Mac mini will not see the iPhone in iTunes, Disk Utility or Image Capture. My MacBook Air, with a different iTunes library cannot see it either but they can both see my iPad & iPods.
I have tried restarting the computer with only the iPhone connected via USB. No help. I do not see the point in re-loading iTunes if my other machine cannot see it but can see other iOS devices.
All software is up to date on machines & iOS devices.

A&T users migrating to Verizon: 4.3.1 data will not restore to 4.2.6

For users who are migrating from AT&T beyond the March 11 4.3.1 firmware release and have updated their GSM iPhones to this new firmware: If you jump ship to Verizon and purchase an iPhone 4 with firmware 4.2.6 there is no way to restore your backup files from iTunes to your new phone. Apple has a clear fragmentation occurring with their firmware releases and any user who wants to transfer information from 4.3.1 to 4.2.6 will be unable to do so.
Apple support has indicated a release will be made for the Verizon iPhone firmware but there is no estimate date when this will happen (could be months from now). It seems as if you might just be stuck starting fresh and re-synchronizing data manually. 3rd party application data will not be able to be transferred unless the app has built in iTunes File Sharing for in-app backup of your data.

Well hopefully the next major iOS release (iOS 5?) will end this fragmentation and put all iPhone users on the same page. I want to see us poor Verizon users get the same love from Apple that AT&T does. And that doesn't mean getting new (well old, I guess) software and hardware 8 months after them. <sniff> Have hope... AT&T only had to wait a whole 30 days (and 2 weeks) to get iOS 4.3(1) and get that hot spot feature (and well... a whole slew of other enhancements, bug fixes and security updates). So maybe, just maybe us Verizon users will see maybe one more update that will at least get us on par with the GSM users. I don't want anything extra... just equality. So I'm hoping that this isn't going to become a tug of war between CDMA and GSM iPhone users!

2nd Gen Ipod will sync with itunes but will not download new song

My Ipod will sync with itunes but will not download newly purchased songs. It is Ipod nano 2nd gen.

If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes. If the new songs are not included in what gets synced to the iPod, they will not sync.
If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select it there, to show its Summary screen to the right. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
NOTE: If Sync Music is not already checked, that means the iPod is currently set to Manually manage music. Setting up automatic syncing will replace the iPod existing content. If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
If your iTunes library fits on the iPod, you can choose the option to sync Entire music library. Otherwise, choose the option to sync Selected playlists, artists, albums, and genres. Below that, select (checkmark) what you want to sync to the iPod from the lists.
One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod. Or you can use existing playlists. Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content). Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs). If you have new songs, add them to a playlist that is synced to the iPod. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

CDs I burn from my itunes 10 on my macbook with snow lepard will not play in the regular cd player. How do I burn Cds that will pay in a reg old cd player?

When the computer was new, I had the same issue I have now. It was new and I could not burn to play on a reg cd player. Today, I can not burn to play on a reg cd player. Inbetween, I could not burn to play on a reg cd player. I keep giving up and then trying months later.
I have recently made the cds that play on the computer. I have also tried in the last month to make a dvd copy, it played. I have gone to people's homes and tried the cd's burned in my computer. They are not recognized. This last round I have only used the cd-r but have tried many others in the past. I am running out of money to keep buying different brands, kinds, etc. I figured it must be my lac of knowledge and am trying to get some new here.
Sincerely,
Paul

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

I just downloaded and installed the new iTunes on a Toshiba Satelite of some age. It was just completely reformated and updated with XP. iTunes will not open. The terms page comes up and when I agree it disappears. I have uninstalled and reinstalled.

Perhaps something here will help:
http://support.apple.com/kb/TS1421
Regards.

Using Lion, recent Movies with .mov extension will not play in Quicktime, but earlier ones taken with same camera (Kodak M530) will play fine.

Using Lion, recent Movies with .mov extension will not play in Quicktime, but earlier ones taken with same camera (Kodak M530) will play fine. I have got VLC which runs them fine but cannot get movies saved in iPhoto to play in VLC...and of course its a real bugger to copy moves from iPhoto to another folder; in fact if anyone can tell me how to do that I will accept defeat!

Hello Shad:
Have you downloaded and installed Flip4Mac?
http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=windowsmedia
Barry

Mainstage 2 : The poeples who buy complete version of Logic with Mainstage 2 will not have free update of Mainstage ??? This is outragous !!!

Mainstage 2 : The poeples who buy complete version of Logic with Mainstage 2 will not have free update of Mainstage ??? This is outragous !!!

I also agree that the paid update is a sham to those who bought the full boxed set of Logic. The ONLY reason I bought the boxed version of Logic was to get MainStage....I don't use anything else in that package. So ultimately, I've paid hundreds of dollars for a product that's now selling for $30 and I don't even get a free update.....sheesh!
As far as this logic goes: " MS 2.2 is a feature release" and that I "never bought that version of MainStage with the Logic Studio box": bollocks! Many consider a feature release to be more than a .1 incremental update...OSX versions excluded. With the exception of major OSX updates, I've never experienced being charged money for a .1 incremental update, and the vast majority of software developers have a policy that incremental updates are free until a new version is released i.e. v.2.5.6 to v3.0. I'm sure that's not always the case, but it's definitely the case in an overwhelming majority of cases.
Shame on Apple for this price gouge.

PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times..

Started in Preview to save...but PDF, with electronic signature, will not save. In Finder it's nowhere, tried multiple times.

I am having the same problem with signatures. I am including a form in a pdf portfolio to collect signatures from different users who have Reader. I make sure that features have been extended for reader. Most of the time they are okay. But every once in a while (at least one every two weeks) I get a user telling me they can't sign. No message or error of any kind, just a quick blink but no signature. As a work-around I've had to save a copy and re-extend features. This can be time consuming when there are a few documents I need to circulate. Please advise.

Pictures with GPS-data will not be shown in list-view (PSE 11, Win7)

Similar Messages

Maybe you are looking for