Picturesize problem after Rendering a timeline in Premiere Pro CS4

Hello,
I currently work with 4.1.0 and have the following problem. When I import Tif sequenze 1280x720 as film, first the film looks correct. The red line above in the timeline says that the sequence is not rendered. When I render now this timeline by pressing the Enter-key, after rendering the content looks zoomed in the preview and on an output monitor the picturesize shrink to approx. 70 %. But there is no effect on this track. This happens simply with original tif files. When I use JPEG files the problem does not exists. So I presume a problem when processing tif files. Do you know problem like this?
Thanks for an answer
André

André,
What are your Project/Sequence Presets?
Is Scale to Frame off, or on?
Good luck,
Hunt

Similar Messages

How To Sync Multiple Timelines in Premiere Pro CS4?

In After Effects, if you create one Comp by dragging another one onto the "New Composition" icon, the timelines of those two comps will be synced (IE: If I jog to 00;00;16;06 in Comp01 and I switch over to Comp02, it will automatically jump to 00;00;16;06 as well).
How do I do this in Premiere Pro CS4? By default, it does not seem to sync up when I drag Sequence One into the timeline of Sequence Two. I have cuts done in the first Sequence that are important to elements I'll add in Sequence Two and I need to easily jump to those cuts.
Thanks!

Mmm, none of these are really emulating what I can get in AE. No matter what I do in Sequence One, it will not jump to the cuts I need in Sequence Two. However, I think the easiest way to do this is...
Create markers at the cut points of Sequence One
Open Sequence One in the Source Clip Window right next to the Monitor Window, which will have Sequence Two open
Jump to the first marker in the Source Clip window, copy the time code of that marker and paste it into the timecode of the Monitor Window
Cut at this point, wash, rinse, repeat...
Having said this...this is a pain in the ***. I really wish Premiere was set up more like AE as this would have been more helpful I feel in Premiere as you'll be doing more editing here than in AE.
Unless...I'm missing something? Just to give this one last shot (and to make sure I'm being as clear as possible). Is there a way to be navigating EXCLUSIVE in Sequence Two, via either keyboard shortcut or some type of button in a monitor window, to jump around to cut points that you made in Sequence One, WITHOUT having to jump back to that sequence?
Here is the scenario I'm looking for: Sequence One has a cut at 00:00:02:00. I jump to that point in Sequence One. I click over to Sequence Two (which has Sequence One nested) and I click or hotkey to the same point in the timeline that 00:00:02:00 that Sequence One is currently setting at.
The reason this is vitally important is that I'm going to remove the space between 00:00:02:00 and 00:00:03:00 and replace just that part with something else. Thus, these cut points are vitally important.
Any thoughts?

Playback stops after a few seconds in Premiere Pro CS4

I have Adobe Production Premium CS4 for mac and I am having trouble with premiere. Every time, no matter what I do in the preview window or the timeline, if i hit play, the video plays for about 20 frames and the curser jumps back to where it started i think i've tried every setting possible. I do also have Final Cut installed if that makes a difference but it shouldn't. I previously used CS4 as well as older versions of premiere pro on PC and I did not have any problems. I incase you need my specs, im running a 2.8 GHz Macbook Pro with 4 gb of ram & OS10.6.3 Any help as to how i can fix this would be greatly appreciated!

Wow, thanks for the quick response.I thought that this post (being over a year old) might not get one. I'll try to be a specific as I can. I'm a teacher at an international school Thailand, and we just opened a new Mac lab for video editing. Last year I was using PCs. We have about 27 user license for premier cs4 and 5 license for cs5. The machines are all new imacs, and they are running OSX 10.6.8. The graphics are 32bit. The processor is intel core i5. Memory is 8 gigs of ram. We've been doing basic editing projects using imovie, but now I need them to learn higher end software with layers and more specific controls. The source files come from all different types of cameras. Most of them are imported .mov files. I had so many problems with premiere cs4 on our PCs that I almost quit using it all together. It was usually codec issues because of all the different file types I need it to handle. Every student has different cameras so we get a lot of different file types. On the Mac the specific thing I was was working with was a clip created from one of my students imovie projects. The frame rate is 29.7 it was rendered with quicktime so it is a .mov file. It is only 2 minutes long. I changed the sequence settings to about 10 times and got the same result. It plays when scrubbing, but just like in the original post, when you try to use the playback feature it will only play about 20 frames and then jump back to where it started. I was using premiere cs5.0.0 but my student who showed me the problem was using cs4.0.0. I don't have this problem in imovie or final cut pro. I really need to be able to use premiere because we don't have enough user license of final cut pro, and imovie isn't powerful enough for our next set of projects. I don't have administrative rights on our machines, but our tech staff can help me if there is something that needs to be changed. Any help or suggestions is greatly apprecieated.
Paul

Problem with video playback in adobe premiere pro CS4

Whevener i am to put something into my video. Via it be either A fraps recorded video or a video shot by my camera... i put it in the library and drag it to the stage. then when i play it in Premiere the video just stays as a still picture but the audio plays. It does this with 2 methods i tried (Fraps and my Photosmart M537 Camera). I asked My uncle (who had the same problems with CS3) and he said that hes pretty sure theres something wrong with the Codec. I think thats it because when i put in my video that i had recorded with Hypercam 2. it worked fine. Could anybody please help me?

1 - search the forum for fraps - many problems, few successes
2 - what CODEC is used for your Photosmart M537 Camera?
If that is a STILL camera which has a video mode, you most likely need to convert to DV AVI type 2 with 16bit 48khz sound
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link

Problem bei Importieren von Clips mit Premiere Pro CS4

Hallo Leute,
also ich hab ein versucht ein Videoclip zu importieren, aber dann kommt immer eine Fehlermeldung, dass der Codec fehlt oder nicht verfügbar sei. Also hab ich mir gedacht, ich brauch QuickTimePlayer um das Ganze abspielen zu können. Also Quicktime heruntergeladen und wollte ein Videoclip abspielen. Das Komische daran ist, dass ich nur den Ton höre, und das Bild ist komplett schwarz. Und mit Premiere kann ich den Clip immer noch nicht importieren... Was brauch ich denn für nen Codec, dass ich die Clips importieren kann?
Also die Clips sind von ner Videokamera mit imovie heruntergeladen worden (so hat mir jemand erzählt), und hat die Endung .mov.
Ich hab auch schon DivX heruntergeladen und kann die Clips auch nicht damit abspielen.
Das wär super, wenn ihr mir weiterhelfen könnt. Danke.
Viele Grüße

Hallo arc52207,
Ich habe dein Problem mal am Mac getestet:
Zuerst über den Media-Browser dann .mov Datei auswählen und in das Schnittfenster ziehen,
bei mir ist jetzt eine funktionierende Sequenz mit Film und Ton vorhanden siehe Screenshot:
Es kann aber auch sein, dass du Video und Audio Signal einzeln in das Schnittfenster einfügen musst.
Ist es möglich, dass deine Videodatei beschädigt ist?
Da zumindest Quicktime deine Datei immer abspielen sollte.
Leider kann ich dir ansonsten nicht mit deinem Problem weiterhelfen.
mfg Markus

Exporting from Premiere Pro CS4 using Media Encoder gets stop error

I am trying to export my timeline from Premiere Pro CS4, using the Adobe Media Encoder CS4 to export my timeline as an MPEG2 HDTV 1080 24, and it goes for about fifteen minutes then I get the blue screen and my computer restarts, telling me the program had a stop error. Is there a way to go around this step? Another method to get the mpeg2 without losing quality? Anything I can do?
Please offer any knowledge you have before I scream at my computer again.
Thank you

as I know Adobe products are buggy no matter what hardware you have.
I am sorry, but my experience has been the absolute opposite of what you have heard, or experienced. I have used many, many Adobe programs for almost 2 decades (maybe even more than 2 decades?), and have never observed such. I do have to admit that over those many years, I have always had a "state of the art" computer, but have made plenty of $ using Adobe software. Even with my now aging workstation, things work great. Time to upgrade though.
When troubleshooting issues, they shake out like this:
1.) system
2.) Assets
3.) Project
4.) OE
5.) Bugs
This is after troubleshooting Adobe issues from almost the time that PS hit the PC, when they were only NNTP, in what, 1985?
Now, I am not saying that your issue IS hardware, but only that that is the most likely issue, given a BSOD. Also, system is the #1 cause of issues, so that is where I start.
Good luck,
Hunt

Adobe Premiere Pro cs4 Timeline Problem

Im new in using adobe premiere pro cs4 and im just using this to complete our project in english...so...im completely a noob pls help me with this problem:
when i put my videos in the timeline i try to play it..but when i play it sometimes or usually the video hangs...but i can hear the audio...
also before that problem I also had the problem that when I tried to import the video when I play it in the source monitor it hangs...then a friend of mine asked me to convert those .avi files to mpeg to see if it solves my problem...then happily it did.....maybe this problem is related to my problem now...just saying...
THNK YOU TO THOSE WHO WOULD REPLY I REALY APPRECIATE YOUR HELP

Some suggestions... and answer at least the 16 questions at the end of the Wiki article.

Premiere Pro CS4 - Problem with the monitor program.

Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks!

Premiere Pro CS4 4.2.1 Halts rendering whatever I ask!

Hi there.
Finally I decided to post this.
I have been tracking in internet this situation for months... since PPro CS4 got out, I have been testing and working with it. However, I cannot say I prefer CS4 to other opponents (even one or two Linux apps oddly). The thing is when an app makes us spectate, we should have results! I cannot go back to previous releases of PPro because I need that queue in AME. So, let me beggin to explain the error:
The application (Premiere Pro CS4 or Adobe Media Encoder [AME]) halts forever when rendering video (a code loop? while "something"="some thing" then do "render frame again"?). So, happening the error in two aplications that use a bunch of files, I must say it is something used by booth like, my guess, PProHeadless. Moreover, the video it might have a filter or not, an opacity key, might be in a diferent format and created within adobe realm, or even outside like Fusion or Combustion, it can stop. And I say can because I am making tests these holy days to reach a conclusion: it's random. It might ocour in frame 150, or in 20 000, with some kind of format video or a filter or everything "as nature as" a PPro captured avi.
Graphics? Updated as today means. Windows? Up to date also! Adobe Premiere Pro? same thing as you already noticed.
This halt is documented by a png file atached to this post. With taskmanager also. That halt is typical. I am in windows 7 64bits, but also have winxp 64bits that produces the same error. The program can only be terminated by process kill and that sort of things.
As I have searched thoughout the internet, I have only seen a post in creative cows that appears similar to this. No luke for a solution yet. When update 4.2.0 came and I had an enormouse reliefe, thiinking it would "heal" the program... no good. I have not been able to respect some deadlines with clients. I will shift if necessary! At least the minimum would be an error ex spit by the program... nothing never came out. I'm blind and adobe might be also. All programs I've try to develop had error mannagement. CS4 release was something apparatuouse but could had wait for a 4.1.0 update in Premiere for instance... I am really tempted for a mac! At least I know what should I buy to make a program run in there... just a mac!
As I see, no software seems to be the problem. It's a fresh install of windows 7 and PPro CS4. Nothing else installed in the system but flash, vlc, acrobat reader MSN live, calim av, proDVD mercalli
Hardware bug or incopatability?
So... my specs if this helps:
Processor:     AMD Athlon(tm) 64 Processor 3500+ 2.21 GHz
Ram:             5,00 GB 667Mhz
OS:               Windows 7 Ultimate 64-bit Operating System
Graphic board: NVIDIA GeForce 7300 LE
MB:               Asus M2N-E with Serial 3Gb/s RAID
Disks:            1 SATA for OS.     SATA Disks for footage and project storage 7000 rotations all I think
I believe everything is Adobe PPro supported... so... where the hell is the problem?
Thanks in advance!

OK
I have been these days arround this issue. Done many troubleshooting... trying to understand problems. Here is what I got:
Getting the hauppauge board off the PC seems to have stopped the "halt" of the encoders and renderings in Premiere and AME. Hope it won't happen again, but, It's kind an exclusion game... What was diferent from the setups I have seen in many forums and posts was this ancient board. Adobe shoulde analyse this one against Premiere CS4 and AME: Hauppauge WinTV-Go bt848 conexant board (or it's a lost of time... as it's not supported anymore in Windows, but is in Linux :] ).
As for the playback... a fine tune for performance options of my graphic board was able to reduce the jerkiness of video... so I had the idea to also overclock both processor and graphics. The result is this:
Before: Processing of video with the timeline in view (default workspace) was allways 100%, skipping so many frames that even entire clips coundln't send a sigle frame. Where only the output frame (ç shortcut) playback was almost aceptable, with processing at 100% and some times going leaving a tiny space for other things to process.... The fine tune of graphics board, was able to get in default workspace the insertion of may more frames in there, and with ç shortcut - output full mode, it was 95-100 spiking frequently between them.
Now: Default workspace: 80% processing... Output frame: 60-70% My pc is now in test to seach for the optimal (aceptable) overclock parameters. And it seems I can overclock even more (not in graphics but the processor).
This is good and aceptable for the computer setup...
However, to everyone reading this, please be very carfull at how you overclock. Be shure you read everything you can find (from reliable sources - your hardware suppliers, as for the processor, the mother board, the graphic board... etc..). If you mess something, better you have the money to replace :].
Thanks for everyting

Premiere Pro CS4 and Canon 600d problems

Hello,
Recently I've been having a few recourring problems when trying to edit footage I captured on my Canon 600D on Adobe Premiere Pro CS4.
The footage shot on the Canon is 1920x1080 at 24fps, when I create a setup preset for these settings in Premiere the clips appear to import absolutely fine. The setup Ive created is shown in the screenshot below.
The problems start when I place the clip on the sequence and render it, once the clip renders the playback in the program/timeline preview window goes all weird and doesn't play the clip properly. Shown in the screenshot below.
First of all I thought this might just be a playback error but when I try to export it as a video file it says error and closes down. This is extremely irratating so i wondered if anyone would be able to offer me a soloution. I have a feeling it may be my setup preset but if so would someone be able to tell me the correct way to set it up for a canon 600d camera because whenever I try a preset found within premiere it exports the video at 720 resolution and very low quality.
Thanks very much for whoever replies, I appreciate it very much
Mike

Ahhh okay that sucks, is there anyway to convert the footage that I already have without drastically reducing the quality as I want my film to be the best quality that is possible?

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?

Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
Regards and again many thanks
Stanley

Premiere Pro CS4 graphic problem?

When adding a video clip or audio and image to the timeline I get this ghost effect on the timeline and its hard to see whats going on.what could be the problem and how do i fix this?

Other than knowing you have Premiere Pro CS4 from the forum name, you provide ZERO information for anyone to help
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
More information needed for someone to help http://forums.adobe.com/thread/416679
Some is general about your computer and OS, some is specific to video editing
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

Cannot get my tape based media to the timeline in Premiere Pro CC

Cannot get my tape based media to the timeline in Premiere Pro CC, I have eqrlier in my edit, but now I get the hand dragging it with the circle and slash on it . THis will not let the media download to the timeline anymore. What happened.... DId I hit a button and/or cause it to be locked out from loading media intot he timeline. My digital basde media loads fine.

Here is more information: I use Premiere PRo CC 7 and the taped based media in the bins are from a Canon HV30 taped based catured to PP directly in a MPEG format. I have already used some edits from this media as well as my captures from digital, which isnt causing any problems. When I mark the taped based media in the source window and attempt to drag it into the timeline the hand gets a circle and slash line on it and will not let me place it into the timeline. Yet I can still load my digital stuff into the timeline and edit normally. I need some footaghe from the tapes but cannot get it into the timeline from the source monitor even after updating, shutting down and reopening. No avail still when trying to drag the hand with the circle slash still exist not allowing it into the timeline. Previous footage on the timeline works no problem. This started yesterday.

Premiere pro CS4+media encoder CS4 problem encoding to WMV and MOV

Hello,
I am new to CS4. I lurked around the meanders of CS4 help and FAQ. In spite of the large help database I could not find a solution to my issue.
I edited a little movie from shots I took during holidays. I edited in premiere pro cs4 and it is a bit faster than CS3 <yoohoo>
However I want to export the movie as NTSC source to high quality download. In the Expot settings, I wrote a file output of course so it can encode and compile the movie somewhere on my HDD and I did not touch anything in standad NTSC source to high quality download values and tabs. In the end the movie should be around 848 mega.
I press OK, then Media Encoder pops up on screen. my project comes automatically in Media Encoder which is neat so I just had to click on start Queue but here is my problem...
I can wait for 4 hours or more, Media Encoder status states Encoding but nothing moves forward. Elapsed time remains at 00:00:00, Estimated Remaining remains blank.
Although something triggered my attention when I widen Media Encoder Source Name tab. It sounds like my project from Premiere Pro is placed in a temporary folder instead of using the regular save project file folder in ...>adobe>premiere pro>4>sebsofie2010b which strange.
I try to place a picture of my issue and perhaps it will help everyone.
This picture was taken about 1 hour and half after I tried to encode the movie for the fifth time.
The status quotes "Encoding"...
Thanks in advance for any help

Hello,
This is Song to an Illiad. I had to change Email address and password as I am switching provider soon.
So Ok to bypass the issue at that time, I simply transfered all files to a jumpdrive and re-did the composition at a friend house. Although my problem persist and Thank you for the Wiki link it was helpful. Sherlock free ware discovered several erronous Codec. Do not ask me why, how, when please. I do not toy around with codecs and all I do is update software but I have several software going from Adobe to Autodesk series as well as Nero Light version that came with my Dvd burner. Should I also mention I play video games when down time permits, as such I updated several time the DirectX software. Beside this, what is it called... Dvix or Xvid, well something like that... prompted me about 2 months ago to update to a newer version which I did. Finally I installed a freeware to export an avi type to another found on Cnet.com a few months ago as the file could be seen in Premiere pro but there were no Audio track seen in premiere while the client gave me his camcorder and I knew there should be an audio track, it was a sort of camcorder that records on a memory sticks which is why the camera was small. It was a canon but nothing more detailed than that. Anyway, I had the camera with no drivers whatsoever and I had a hard time to find the driver for free online which is why I found a freeware or perhaps was it a shareware or a trial (I am not sure), anyway it decoded and re-encoded the movie which it did successfully with lots of image loss quality but it was succesful. I know I deliberatly threw the shareware or trial straight in the garbage once I was done because I do not want this kind of junk on my PC. Perhaps could it be the issue with Media Encoder not able to start?!?!
Here comes a couple of texts Copy/Past & image to describe what Sherlock found
Codec Reporting Utility Output Text
Date and Time: 26-Aug-2010 23:43:54
System Information
Operating System = Unknown Professional (6.00.6002)
CPU Descriptor    = Intel(R) Core(TM)2 CPU          6600 @ 2.40GHz
CPU Clock Speed   = 2400 Mhz.
Total Memory      = 4095 Mb.
DirectX Version   = 10.0
WMI Version       = 6002.18005
ACM Version       = 5.00.0
Video Codecs
Adobe DVCPRO 100 Codec
     FileVersion       = 3.0.1095.1
     CompanyName       = Adobe Systems Incorporated
     FileDescription   = Adobe DVCPRO 100 Codec
     InternalName      =
     LegalCopyright    = Copyright (C) 2007
     OriginalFileName =
     ProductName       = Adobe DVCPRO 100 Codec
     ProductVersion    = 3,0,1095,0
Adobe DVCPRO 100 Codec
     FileVersion       = 3.0.1095.1
     CompanyName       = Adobe Systems Incorporated
     FileDescription   = Adobe DVCPRO 100 Codec
     InternalName      =
     LegalCopyright    = Copyright (C) 2007
     OriginalFileName =
     ProductName       = Adobe DVCPRO 100 Codec
     ProductVersion    = 3,0,1095,0
Adobe DVCPRO 100 Codec
     FileVersion       = 3.0.1095.1
     CompanyName       = Adobe Systems Incorporated
     FileDescription   = Adobe DVCPRO 100 Codec
     InternalName      =
     LegalCopyright    = Copyright (C) 2007
     OriginalFileName =
     ProductName       = Adobe DVCPRO 100 Codec
     ProductVersion    = 3,0,1095,0
AVI Decompressor
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Quartz.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Quartz.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
AVI Draw
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Quartz.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Quartz.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
Cinepak Codec by Radius
     FileVersion       = 1.10.0.11
     CompanyName       = Radius Inc.
     FileDescription   = Cinepak® Codec
     InternalName      = iccvid
     LegalCopyright    = Copyright © 1992-1995 Radius Inc., All Rights Reserved
     OriginalFileName = iccvid.drv.mui
     ProductName       = Cinepak for Windows 32
     ProductVersion    = 1.10.0.0
DivX 6.9.2 Codec (2 Logical CPUs)
     FileVersion       = 6.9.2.26
     CompanyName       = DivX, Inc.
     FileDescription   = DivX
     InternalName      = DivX
     LegalCopyright    = Copyright © 2000-2009 DivX, Inc. All rights reserved.
     OriginalFileName = DivX.dll
     ProductName       = DivX®
     ProductVersion    = 6.9.2.26
DivX 6.9.2 YV12 Decoder
     FileVersion       = 6.9.2.26
     CompanyName       = DivX, Inc.
     FileDescription   = DivX
     InternalName      = DivX
     LegalCopyright    = Copyright © 2000-2009 DivX, Inc. All rights reserved.
     OriginalFileName = DivX.dll
     ProductName       = DivX®
     ProductVersion    = 6.9.2.26
DV Splitter
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Qdv.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Qdv.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
DV Video Decoder
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Qdv.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Qdv.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
DV Video Encoder
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Qdv.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Qdv.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
Intel IYUV codec
     FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = Intel Indeo(R) Video YUV Codec
     InternalName      = iyuv_32.dll
     LegalCopyright    = Copyright Intel Corporation 1992-1997
     OriginalFileName = iyuv_32.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.0.6000.16386
Intel IYUV codec
     FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = Intel Indeo(R) Video YUV Codec
     InternalName      = iyuv_32.dll
     LegalCopyright    = Copyright Intel Corporation 1992-1997
     OriginalFileName = iyuv_32.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.0.6000.16386
MainConcept MPEG Video Decoder
     FileVersion       = 1, 0, 0, 65
     CompanyName       = MainConcept AG
     FileDescription   = MPEG Video and Audio Decoder
     InternalName      = MCDSMPEG.AX
     LegalCopyright    = Copyright (C) 2001-2004 MainConcept AG
     OriginalFileName = MCDSMPEG.AX
     ProductName       = MPEG Decoder
     ProductVersion    = 1, 0, 0, 65
Microsoft RLE
     FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = Microsoft RLE Compressor
     InternalName      = msrle32.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = msrle32.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.0.6000.16386
Microsoft Video 1
     FileVersion       = 6.0.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = Microsoft Video 1 Compressor
     InternalName      = msvidc32.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = msvidc32.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.0.6000.16386
MJPEG Compressor
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Quartz.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Quartz.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
MJPEG Decompressor
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Quartz.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Quartz.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
MPEG Video Decoder
     FileVersion       = 6.6.6000.16386 (vista_rtm.061101-2205)
     CompanyName       = Microsoft Corporation
     FileDescription   = DirectShow Runtime.
     InternalName      = Quartz.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = Quartz.dll.mui
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 6.6.6000.16386
Mpeg4 Decoder DMO
     FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
     CompanyName       = Microsoft Corporation
     FileDescription   = Windows Media MPEG-4 Video Decoder
     InternalName      = mpg4dmod.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = mpg4dmod.dll
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 11.0.6001.7000
Mpeg43 Decoder DMO
     FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
     CompanyName       = Microsoft Corporation
     FileDescription   = Windows Media MPEG-4 Video Decoder
     InternalName      = mpg4dmod.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = mpg4dmod.dll
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 11.0.6001.7000
Mpeg4s Decoder DMO
     FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
     CompanyName       = Microsoft Corporation
     FileDescription   = Windows Media MPEG-4 S Video Decoder
     InternalName      = mp4sdmod.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = mp4sdmod.dll
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 11.0.6001.7000
MSScreen 9 encoder DMO
     FileVersion       = 11.0.6001.7000 (longhorn_rtm.080118-1840)
     CompanyName       = Microsoft Corporation
     FileDescription   = Windows Media Screen Encoder
     InternalName      = wmvsencd.dll
     LegalCopyright    = © Microsoft Corporation. All rights reserved.
     OriginalFileName = wmvsencd.dll
     ProductName       = Microsoft® Windows® Operating System
     ProductVersion    = 11.0.6001.7000
Nero DVD Decoder
     FileVersion       = 4,11,3,7
     CompanyName       = Nero AG
     FileDescription   = MPEG-1/2/4 & AVC video decoder w/ DxVA
What should I do? Can I just reinstall the codec from my Adobe CS4 Production Suite (Without) creating more issues and problems? It seemed the Wiki hints were helpful to pin point a problem but not always at giving solution.
Thanks in advance,
Seb
P.S: Could Adobe throw a little software to download to ensure all codecs are what they should be like and prompt user to reinstall straight from our Dvds? It would be soo much easier that way.
Seb

After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

Picturesize problem after Rendering a timeline in Premiere Pro CS4

Similar Messages

Maybe you are looking for