Pidgin voice and video chat menus gone!?

I opened pidgin today to find that all the options to start a video chat / voice chat are gone. And the plugin which configures microphone and webcam is also not in the list of plugins.
It is pretty wierd.
I'm using gnome 3.6 with arch linux x86_64 and Pidgin 2.10.6 (libpurple 2.10.6)
.  How can I fix this?
Last edited by ebshankar (2012-11-11 07:33:08)

tomk wrote:When was it working last? And what did you do to your system since then?
Just regular system upgrading thats it. I don't remember exactly when these menus are gone. I noticed it today.
I downgraded to pidgin-2.10.6-1 from -2 and now I can see the the plugin. Still doesn't work but it shows this error below it.
Error: undefined symbol: gst_property_probe_get_type
Check the plugin website for an update.
Last edited by ebshankar (2012-11-11 09:28:40)

Similar Messages

  • BBM voice and video chat

    Hello Everyone,
      I just bought the bb Z10 and it has been great so far. Yesterday i noticed the bbm video icon had disappeared thus disallowing me to make or recieve a voice or video chat. I have done everything possible to the best of my knowledge including a restart several times. Everyother setting concerning video set-up i have done accordingly. Can someone help out cos this is frustrating

    Has that icon disappeared for a certain BBM contact... or all?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Google voice and video chat plugin seems to not work with Firefox 4

    Once login, I click on parameters item then Chat.
    In the audio and video chat section my webcam seems not to be detected.
    This works well with Firefox 3.6.
    Any help is welcome :-)

    Hello again,
    Seems to be fixed in the Firefox new version (4.0.1).
    Best Regards.

  • Audio and video chat application

    I would like to create a voice and video chat application,But I haven't way to do this.
    if any one have the source code related to voice chat. Please send me an mail.
    My mail Id is
    [email protected]

    Dear gosa,
    You can order flash based video voice chat at [http://www.flashcoms.com|http://www.flashcoms.com] They do high quality products.
    Hope this information can help you.
    Regards,
    Serge

  • Problem with BBM voice and video on Z10

    i have problem connecting on my Z10 with BBM voice and video. before it works fine but i think after an update of BBM is not working anymore. the chat sesion works fine.
    i have a second Z10 but that one works fine.
    any solution ?
    THX
    Bryan

    On your BlackBerry10 device:
    Reboot: On the side edge volume keys, press and hold down both of the Up and Down volume keys for about 20 seconds, ignoring the initial screenshot message... the screen will go black and reboot.
    Now, try again.
    Likewise, ask a BBM contact of yours to tell you if your BBM contact has the green icon for BBM voice/video.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Audio and Video Chat

    Hello Sir
    I would like to create a Audio and video chat application,
    if any one have the source code related to voice chat. plz mail it to i need it ,thanks in advance.
    my mail id
    [email protected]

    Welcome to Apple Discussions!
    YES! In fact I set up my own PC machine to test. Follow the windows tip section that can be found at: http://www.mvldesign.com/videoconferencetutorial.html
    It's also best to make sure your set-up is working correctly by testing with a known mac user that has no issues. This way you can troubleshoot where the issue lies.

  • IChat 3.1.8 voice and video not working - thank you

    I am runnning iChat AV 3.1.8 and every time I try and connect using the voice or video chat I receive this message: There was a communication error during your chat.
    The Details of the report show this:
    iChat Connection Log:
    AVChat started with ID 171552.
    dudnes1: State change from AVChatNoState to AVChatStateWaiting.
    0x6100820: State change from AVChatNoState to AVChatStateInvited.
    0x6100820: State change from AVChatStateInvited to AVChatStateConnecting.
    dudnes1: State change from AVChatStateWaiting to AVChatStateConnecting.
    dudnes1: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    0x6100820: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    Video Conference Error Report:
    2.003876 @:0 type=4 (00000000/0)
    [VCSIP_INVITEERROR]
    [19]
    2.003784 @SIP/SIP.c:2447 type=4 (900A0015/0)
    [SIPConnectIPPort failed]
    I am in the UK, trying to connect with people back in the states could this be a factor? Other people in my flat dont seem to have a problem connecting however and I've been able to connect to people room to room when I try. I also had this problem in the States connecting from my Mac to a PC for video chat but was able to do so if I used Yahoo Chat instead of iChat.
    Any thoughts, ideas, or suggestions would be really apprecaited. Thank you for any help.

    http://discussions.apple.com/thread.jspa?threadID=527902
    3:42 PM Sunday; November 11, 2007

  • Welcome to the Voice and Video over WLAN Discussion

    Welcome to the Cisco Networking Professionals Connection Wireless Forum. This conversation will provide you the opportunity to discuss issues surrounding Voice and Video over WLAN. We encourage everyone to share their knowledge and start conversations on issues such as bandwidth intensive wireless applications, and any other topic concerning Voice and Video over WLAN.
    Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
    We encourage you to tell your fellow networking professionals about the site!
    If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

    This is easily done with dial peer statements . The dial peer in your originating router must route the calls to the terminating router first. That would look like :
    dial-peer voice xxxxx voip ( the xxxxx is just a tag)
    destination-pattern 45... (that would route any 5-digit calls beginning with 45)
    session-target ipv4:xxx.xxx.xxx.xxx (ip address of the terminating router)
    If digitones are to be dialed after the connection is established, use the statement:
    dtmf-relay-h.245-alphanumeric
    You could also use a statement to specify the codec to be used:
    codec g711ulaw
    You would need multiple voip dial peers if the calls were going to different routers based on the dialed digits. If all calls are sent to the same terminating router, use all wild cards in the dest-pattern statement.
    At the terminating router configure pots dial peers:
    dial-peer voice xxxxx pots
    dest-pattern 45...
    port x/x (whichever port the call is to be terminated on)
    prefix 45 (this re-inserts matched digits which are stripped off by the pots dp)
    Repeat for other ports which will receive calls.
    Paul

  • Screen Sharing and video chats don't work

    I've been searching this forum for awhile and I haven't found a concrete answer to my problem, so if this question has been answered please excuse me. Ok, So here's my situation am running iChat on Mac OS 10.5.1. Whenever I am using my laptop at my school on the network their, I am able to use both screen sharing and video chat. But when I am at home, I am unable to use either one. It begins to try to start the session, but then i receive a message that tells me that a connection could not be established. I know that I have internet access, but I don't know what could be wrong with it.

    After investing far to long in looking at this exact issue on my end, reading the seemingly endless threads on the exact same error, trying all the various tweeks and QT settings, bandwidth limit settings, etc etc. proposed here, I have now solved this problem, and the none of the above were part of the solution.
    I have perhaps one of the the most common routers on the market, Linksys WRT54GL.
    In a totally unrelated network problem (a printing issue), Linksys tech support advised me to reset my router. There is a small button on the bottom. I depressed it for 30 seconds. Rebooted everything and my printer miraculously worked. Yea, I had to reenter my WAP passkey, router admin password etc., but that took 2 secs. So, what does this have to do with iChat?.... The very next time I tried iChat video and turned on and enabled my camera, the recipient immedialty saw me. No connection error.
    Problem solved, for me art least. Not sure if anyone has tried this, but makes sooooo much more sense than the other unApple like suggestions I previous tried. Hope this helps.

  • Eight-Class Model QoS for voice and video

    One of the QoS recomendation in the SRND "Enterprise QoS" is to create a Eight-Class QoS Model utilizing a seperate priority queue for voice and video.
    It says that even though you have only one physical priority queue, that LLQ has an implicit policer that allows for time-division multiplexing of the single priority queue. This implicit policer abstract the fact that there is essentially a single LLQ within the algorithm and, thus, allows for the "provisioning" of multiple LLQs.
    My question is if anyone has tried this and if there are any limitations on the platforms that can support this "dual-LLQ design."

    Design guide which is basically the QoSDesign recommendation bible.
    http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
    It has a large section for WAN recommendations...while you may not
    need to follow one of these Based on my understanding what what you
    have for a link (DS3) and what you are trying to accomplish, I
    believe the following section would be a good place to start.
    - WAN Aggregator QoS Design
    - WAN Edge Classification and Provisioning Models
    - High Link Speed QoS Class Model
    - Eight-Class Model

  • Has anyone tried installing the Google Voice and Video plugin?

    Hi,
    I wanted to check out the Hangouts feature at Google+, but I need the Google Voice and Video plugin for that. I tried unpacking the deb package supplied by Google and installing it manually, but the plugin does not work and Firefox just keeps crashing. Could anyone actually get it to work with Arch yet?

    Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
    Now trying to install from there!

  • IM and video chat in RMI ?

    Hi there, i wrote a message to JMF but i m not it is relevant with that topic. So added it here.
    I am making a instant messaging and video chat application with jmf. For this project , which one is usefull i am not sure. Can anyone help me?
    , For instant messaging, Does Tcp/Ip client server suitable?, or just rmi server enough for that?
    So both IM and Video chat application what king of design shall i make?
    Thanks.

    Hi,
    Welcome to the    Discussions
    The GoogleTalk part of iChat will only Video or Audio Only chat with other iChat Users that have a Jabber or GoogleTalk ID (Googletalk is a Jabber server).
    This means NOT to PCs or to anyone logged in to the GoogleMail Chat web page option.
    As you may know iChat can have Jabber/Google IDs or AIM valid ones that include Apple IDs ending in @Mac.com or @me.com
    You can not do any chat of Any kind between these two types of Buddy Lists.
    Not AIM to Jabber or Jabber to AIM buddies even if they are using iChat.
    You have not said if you can Video chat (Or Audio only Chat) with anyone.
    Your post implies from my reading of it that you also have a AIM valid Screen Name.
    iChat uses the same protocol and the same ports to do Video or Audio Only chats no matter which type of Buddy List is used.
    In System Preferences > Security > Firewall tab if the Firewall is to be used with iChat it should be set at Allow All (In fact Off) or Allow Specific Apps and iChat added to the list.
    As you can Text chat you appear to be past this stage.
    To Video chat iChat uses different ports to those used for Text chatting.
    These may need to be opened or allowed in your routing device if you cannot Video chat at all.
    The best method in terms of Ease and allowing iChat Screen Sharing is to use UPnP in most routers or Port Mapping Protocol to be Enabled in Airport Base Stations.
    9:54 PM Saturday; August 14, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

    Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

    Hi newmarket,
    Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
    iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
    If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
    Sorry,
    GB

  • ISight conflict when installing Google Voice and Video driver

    After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
    Two camera drivers are installed: Google camera 0 and Google camera 1.
    Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
    The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
    However, this is not a solution since I can't use GTalk anymore.
    Does Flash Player 10.2 fixes this conflict?
    Regards,
    Flávio Mikami

    Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
    Now trying to install from there!

  • Firewall and Video Chat

    I've had my iSight for about a year and haven't had too many problems connecting and starting video chats (even from other universities). However, I am working at a University in FL now and was trying to start a video chat and I get the message "Failed to start Video Chat because: (my name) did not respond" After reading some of these discussions (University Firewall and Video Chat in particular) along with other help topic suggestions, I am guessing this is a firewall problem concerning open ports? I can connect with the apple test server for video chat, but not with my buddies. I haven't contacted my IT dept. yet about firewalls, but any suggestions in the mean time? Thanks in advance for any help.
    PowerBook G4   Mac OS X (10.4.3)  
    PowerBook G4   Mac OS X (10.4.3)  

    No Problem.
    Seletion of Connection speed test sites that report Up and Down speeds
    1) http://www.dslreports.com/stest
    2) http://www.adslguide.org.uk/tools/speedtest.asp
    3) http://www.auditmypc.com/internet-speed-test.asp
    Speed tests do not actually say how much bandwidth you will get at any one time on a shared connection.
    If you are in Halls and paying rent with a supposed internet Service you might be able to play the "i'm A customer" card to get a better service.
    In Britian most Universities have a Students Union that can also appy pressure in the right places.
    Ralph

Maybe you are looking for

  • HT1320 how to download the music on my ipod classic to my pc

    how to download the music on my ipod classic to my pc

  • ITunes will not open, no message of problems

    iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?

  • Cannot search for text in a PDF in Safari

    I was previously able to use the "search in this document" when viewing a PDF in Safari. This no longer works and I always get "No Matches" when the word is actually in the PDF document. I installed the Chrome app and its "Find in Page" function is g

  • Process order confirmation error in COR6

    Hi Gurus, I am working as sap manual tester and facing below issue in Process order confirmation in t-code COR6. Batch 456 for component 350515 does not satisfy BOM requirements Message no. Z_MFG017 Need ur help. Regards, Imran Edited by: imran.shek3

  • Is moving to Revel necessary

    I use Photoshop Elements 8 on Windows XP.  I don't have any photos in my library.  I DO NOT have a iPhone, iPad, or any other gadgets.  Do I have to transfer to Adobe Revel or can I just continue using Elements 8? Thanks, Richard