Pie chart not getting

Hai
Im not getting the pie chart .what i did was
i created a query in Bex. And then i publish the query from Bex-Analyzser (Business Explorer -> Tools -> Launch in WebBrowser).
Then i got my report in Web . Then i went to "Graphical display" and i select the 'pie chart' . But im not geting the pie chart.
why it is like that
kumar

Hi, Kumar.
What are you getting? Some message?
Other graphic types works ok?
Regards,
Henrique Teodoro

Similar Messages

Pie Chart not showing

Hi
I'm trying to display a pie chart in the WAD, I have a query associated to my Data provider, but it doesn't display properly. I'm running WAD 3.x and support package 7.
I tried to use different charts and it seems to display my results fine.
Any ideas why this is happening?

MIcelle,
Te issue might be with the way the data is structured in the query..
Copy the data onto a separate sheet and then generate an EXCEL pie chart and change the table structure till you get the format of the graph as desired , now all you need to do is get the quer in the same fomat and you should be good to go.
The graph on the Web depends on the IGS , for Excel , it is based on Excel's charting engine and has not much to do with notes.
Hope it helps..
Arun
Assign points if helpful

Drill Down in Pie Chart not working in IE8 / Mozilla 5

Hi Experts,
In my dashboards, drill down feature in Pie charts are not working if the flash is viewed in IE8 / Mozilla Firefox 5.
In IE7 it is working. Is there any browser settings required for this ? Pls suggest.
Drill down in column chart is working fine.
Xcelsius Version: Xcelsius 2008 SP3 FP 3.5
Browser Version: Firefox 5.0 / IE 8
Many thanks,
PASG

Hi,
You may want to download Xcelsius 2008 with SP4.
SP4 will support the newer IE 8 (32 bits) for Xcelsius related issue.
As for FireFox 5 that came out last week, this won't be supported anytime soon.
Regards,
Ken
Edited by: Ken Low on Jun 27, 2011 8:50 AM

CS2 @ Win XP: Pie charts not closed

Hi all,
I have a pretty urgent problem with pie charts in Illustrator CS2
Here is what I do
- Start Illustrator
- create new document
- select pie chart from tools
- draw a rectangle for my chart
- in the poped up window, I enter these values:
330
192
295
There are lots more values which result in an unproper chart.
I need a fix for that extremely urgent.
Using different values or manual editing of the chart are inacceptable workarounds.
Thanks for help.

Is it then just some specific data values that give incorrect results?
Did you double-check the graph data panel?
Does it maybe contain blank rows, columns or cells?
Are there blanks (or other irrelevant stuff) somewhere within the value cells, in amongst the digits?
Are you using whole integers and/or decimals, and if decimals are you using the correct decimal symbols (points or commas depending on language)?
It seems very odd to me if only some values give incorrect results. I have never seen Illy produce unclosed pie charts before and I've done quite a lot of them. I am therefore not quite convinced that it is a bug - could it possibly be an error in the Illy data?
Like I said, I do know of an error in the data spreadsheets in CS2, so maybe Illy is wrongly interpreting the Excel data. It seems unlikely to me that this is a Mac/Windows thing and an update to CS3 or 4 may be in order.
330, 192, 295 worked perfectly for me.

PIE chart not reflecting properly

Hi All,
I create a Change request and i will not submit so the status in PIE chart will be DRAFT.
But once i submit the CR it still shows that its in draft state. Its state has not changed?
Thanks
Vijay

check wheather this business funcation are active or nor.
/BCV/MAIN FND
/BCV/MAIN_1 FND
/BCV/NWBC_SIDEPANEL

Chart not getting displayed with dimension having sorted

hi Expers,
we are facing some strange kind of problem...
let me brief the details:
1. we have a column month no (from 1 to 12) and month name (Jan to dec).
2. our client need was to start month name from (Feb ,march.....dec,Jan).
3. we created a two logical column
a. month no. -1 (that makes feb as month no 1 and jan as 0)
b. another logical column name fiscal month no.with case statement where case when above logical column when 0 then 12 else above logical col.
4. we have put up sort order on basis of column in 3.b. on make a copy of above month name(as mentioned in point 1) and named it fiscal month name
5. now we create a report with fiscal month name, revenue and country having pie bar graph with bar across revenue and country and fiscal month name in chart slider.
from now problem starts up.
6 we want a total (using create group item) which gives values for all the months.
7 Total is working well when it appears at last ie (feb....dec,jan,total)..then graph is working fine
8 but when we put total at begining ie (total,feb....dec,jan) then chart displays only for total not for any other month...however values in legends(for country) is changing dynamically...
i even tried restart the server....but no help from it.
experts kindly guide to get out of this issue....
regards
Ankit

No specific set up in the server. If you run it just from the BIP UI is the chart included ? You might also chech the J2EE_HOME\applications\xmlpserver\xmlpserver\WEB-INF\lib directory and ensure that the bibeans libraries are present
bipres,jar
bicmn.jar
Tim

BI Publisher Charts not getting displayed in concurrent program output

Hi,
I am using BI Publisher version 11.1.1.3.0 on Windows 7 with word 2007. After creating the Bar chart in RTF template of BI publisher when I load sample XML data and check it in "Preview" is displays the output correctly.
My requirement is to print the charts in concurrent program's output on EBS version 12.1.1. (preferably HTML but PDF will also do) However when I run the concurrent program which processes the data definition and the RTF template registered for this report, the output is just an image of the chart. The XML output generated by the program is not reflected in the chart display at all. (I have verified that XML is generated properly)
Can someone please let me know if there is some setup required to make the charts display properly in concurrent program output?
I have also tried BI publisher version 10.1.3.2.1 for this. With this the concurrent program output is just blank. Not even an image is displayed.
p.s. The program uses standard executable XDODTEXE (which is normally used to run BI publisher reports)
Thanks,
Archana

Hi,
I have finally found solution to this issue....
Two setups are required to display the charts in the concurrent program's PDF output:
1. We need to edit the variables CLASSPATH and AF_CLASSPATH. These variables should have the complete path added for the xdoparser.zip file on the server.
2. The DISPLAY variable should be correctly setup to direct the server output.
Also as per my findings so far, the BI (XML) publisher version 11.1.1.3.0 (or any 11g) does not work with EBS (at least for charts). We need to use BI publisher version which is XML 5.6.3 compatible for EBS. This version is 10.1.3.2.1. (patch 12395372) Now this 10g version does not work on Windows 7 so you need to use Windows XP!
With this... finally... your charts should be getting displayed in EBS output...
Cheers!! :-)
Archana

Width of stack chart not getting retained in Flex 4 but working in Flex3

I have a stack chart on my dashboard when I click on stack chart it become a column chart. When I trying to come back on stack chart by clicking on column chart the width of columns of stack chart does not match with the previous stack chart.
Note: The same code is working fine in flex 3 version.
How can I maintain the same width in both stack charts in flex 4 as it is performing in flex3?
Step 1 Monthly stack chart.
Initially when I click on the equipment break down checkbox the stack chart appears as shown in the below screen shot.
Step 2: Monthly chart: Then when I click on the above “Monthly stack chart”, then I resume to my original bar chart appearance as shown in the below screenshot.
Step 3: Monthly stack chart: Further when I click on the above “Monthly chart” bar chart and move back to the “monthly stack chart” it appears as in the below screen shot in flex 4. The width of the chart in step 3 does not match with the width in step 1 of “Monthly Stack Chart”.
Note: In flex 3 the same step 3 appears to be as shown in the below screenshot.
How can I maintain the same width in step 1 and step 3 charts in flex 4 as it is performing in flex3?
CODE:
/* When click on column chart */
private function chartDrillDown(e:ChartItemEvent):void
{var colsr:ColumnSeries;
    If (chkEquipmentBreakdown.selected) Then
       {    loadBreakdownDataForMonth((e.hitData.chartItem.index)+1);
                     IsMonthly=true;
    Else
            DrillState=e;
              DrillLevel= DrillLevel==0?1:0;
                  if(DrillLevel==1)
                  {chkDEMO.selected=false;
                        LastValidatedBox.visible=false;
                      siteid = e.hitData.item.VLD_SITE_ID;
                     var obj:Object=e.hitData.item;
            colsr = ColumnSeries(e.hitData.element)
                     strassetname = obj[strTitleField].toString();
                     drillToIndex = e.hitData.item.VLD_SITE_ID;
                  viewequivalentBreakdown();
                  fromAssetToMonthly=true;
                  loadMonthlyData(siteid);
        Else
                  {     if(fromAssetToMonthly==true)
     DrillLevel=DrillLevel==1?0:1;
                      else
                        LastValidatedBox.visible=true;
            colsr = ColumnSeries(e.hitData.element)
                       siteid="-1";
                       ShowHideEquipmentBreakdown(false);
                      loadYearlyData();
            If (IsMonthly) Then
                              onchkEquipmentBreakdownChange();
                        IsMonthly=false;
/* Bind data To column chart */
private function onDataLoadComplete(event:ResultEvent):void
{                                   webServ.removeEventListener(ResultEvent.RESULT,onDataLoadComplete);
                  var resultArr:Array = event.result.toString().split("^");
                  xmlData = new XML(resultArr[0]);
                  xmlSeries= new XML(resultArr[1]);
                  xmlColumns=new XML(resultArr[2]);
                  if(resultArr[3]!=null)
                  {     xmlValidatedData = new XML(resultArr[3]);
                        arrSeries=createSeries(xmlSeries,xmlValidatedData);
    Else
                        arrSeries=creatSeries(xmlSeries);
                  //chart properties
                  //arrSeries=creatSeries(xmlSeries);
                  colChart.series=arrSeries;
                arrcalc=arrSeries;
                  /*if equipment break down check box checked*/
        If (chkEquipmentBreakdown.selected) Then
                  {colChart.type="stacked";
        Else
                        colChart.type="clustered";
                  colChart.dataProvider=xmlData.Table;
                  cursorManager.removeBusyCursor();
/* function for load the step 1 and 3 "monthly stack chart".*/
private function onchkEquipmentBreakdownChange():void
                  colsrs.setStyle("showDataEffect", zoomOut);
    If (chkEquipmentBreakdown.selected) Then
                  { GHGDemo.visible=false;
                        AtmosBox.visible=false;
                        chkCompareYear.enabled=false;
                        cursorManager.setBusyCursor();
                        webServ.addEventListener(ResultEvent.RESULT, onDataLoadComplete);
                        if(strTitle==strTitle1)
                              if(GHGGROSS.selected==true)
                                    webOper = webServ.getOperation("LoadGHGDataMonthlyBreak") as Operation;
                webOper.send(userid,selectedYear,siteid);
            Else
                                    webOper = webServ.getOperation("LoadGHGMonthlyBreak") as Operation;
                webOper.send(userid,selectedYear,siteid);
/* function for load the step 2 "Monthly chart".*/
private function loadBreakdownDataForMonth(monthnum:int):void
      {   var dayNum:uint = monthnum;
            cursorManager.setBusyCursor();
                  webServ.addEventListener(ResultEvent.RESULT, onDataLoadComplete);
                  var atmosflag:Boolean;
                  var ghggrossflag:Boolean;
                  atmosflag=false;
                  ghggrossflag=false;
                  if(strTitle==strTitle1)
                              if(GHGGROSS.selected==true)
                                    webOper = webServ.getOperation("LoadGHGDataMonthWiseGross") as Operation;
                        webOper.send(userid,selectedYear,siteid,monthnum);
                                    ghggrossflag=true;
        Else
                                    webOper = webServ.getOperation("LoadGHGBreakDownDataMonthWiseNet") as Operation;
                       webOper.send(userid,selectedYear,siteid,monthnum);
<mx:ColumnChart id="colChart" itemClick="chartDrillDown(event)" dataTipFunction="dtFunc">
        <mx:horizontalAxis>
           <mx:CategoryAxis id="catAxis" />
                  </mx:horizontalAxis>
            <mx:verticalAxis>
            <mx:LinearAxis id="lnrAxis" baseAtZero="true" minimum="0" title="" labelFunction="defineVerticalLabel"/>
            </mx:verticalAxis>
            <mx:horizontalAxisRenderers>
            <mx:AxisRenderer   axis="{catAxis}" labelRotation="45">
            </mx:AxisRenderer>
      </mx:horizontalAxisRenderers>
</mx:ColumnChart>

Thanks for your reply,
I am using the Adobe flash builder 4 and the Adobe flash player 10. To upgrade from flex 3 to flex 4 I just opened the project in flex 4.I am using the default skins/themes of Adobe flash builder 4.
But it is not working as flex 3. Please suggest some other option.
Thanks...

Chart not getting columns from the SQL Query with InlineTransform(xsl)

Hi All,
I am using MII 12.0 . I tried to use the mii standard xsl for converting rows into columns by Inline Transform in a SQL Query.
while executing the Query it is giving me the correct output but i tried to load the same Query in a IChart there it is not showing me the available columns that i can able to see in simple executiion and chart is also not plotting it keeps on loading.
Thanks in Advance.

Hi LinoVaz,
Some things to try for testing purposes -
1. Don't do any Data Mapping of the query columns
2. If a SQL Query, you may need to change the Server Scaling to use Global AutoScale.
I found that when I mapped the inline-transformed query into a bar chart display template, and hit the Refresh button, only the first column name show in the Column Names area. If I mapped it, I got only that column. If I didn't map any columns, I got them all.
Let me know if you find similar results. I think this is likely a bug, so you may consider using a Business Logic Transaction and an XacuteQuery to accomplish the same result.
Kind Regards,
Diana Hoppe
Edited by: Diana Hoppe on Mar 25, 2011 11:46 AM

Histogram works, Pie Chart doesn't :(

I have a simple form, which has 1 block, a block level "when-new-block-instance" trigger and 2 bean_area under the block (beans don't have any trigger code). This simple form is called from within another form when a button is pressed. The histogram (bar chart) works, but the simple pie chart doesn't work (only displays a single circle - not the slices on the pie). The related trigger code is below. Can anybody see what is wrong with the pie chart code ?
Appreciated.
=====================================================================
-- Set the bean area properties
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'CLEAR_BLOCK','');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'GRAPHTYPE','VERTICAL_BAR');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ENABLE_TOOLTIPS','VALUES');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DELIMITER','#');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_TITLE','Order Count By WHIP#red#b#14');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_FOOTER','WHIP Name#blue#12');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DELIMITER',',');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_Y_LABEL','Move Your Mouse To View The Value For Each Bar');
-- Use the following for a nice 3D look (if users want)
-- SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'SET_DEPTH','20,45');
-- This should populate and display the data on the graph by using the related PJC
DECLARE
ordercount NUMBER(10);
whipname VARCHAR2(25);
vData VARCHAR2(200);
vDelimiter VARCHAR2(1);
cursor c1 is select distinct interface_name from pps_order order by interface_name;
BEGIN
vDelimiter := ',';
open c1;
fetch c1 into whipname;
while (c1%found) loop
select count(*) into ordercount from pps_order where interface_name=whipname;
vData := 'Total Order Count Per WHIP'||vDelimiter||whipname||vDelimiter||ordercount;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ADD_ROWDATA',vData);
fetch c1 into whipname;
end loop;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA1',1,'ADD_DATA_TO_GRAPH','');
close c1;
END;
-- THIS SECTION IS FOR THE PIE CHART
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'CLEAR_BLOCK','');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'GRAPHTYPE','PIE_GRAPH');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SHOW_PIE_LABELS','VALUE');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_DELIMITER','#');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_TITLE','Order Count By WHIP#red#b#14');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_FOOTER','WHIP Name#blue#12');
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'SET_DELIMITER',',');
-- This should populate and display the data on the graph by using the related PJC
DECLARE
ordercount NUMBER(10);
whipname VARCHAR2(25);
vData VARCHAR2(200);
vDelimiter VARCHAR2(1);
cursor c2 is select distinct interface_name from pps_order order by interface_name;
BEGIN
vDelimiter := ',';
open c2;
fetch c2 into whipname;
while (c2%found) loop
select count(*) into ordercount from pps_order where interface_name=whipname;
vData := 'Total Order Count Per WHIP'||vDelimiter||whipname||vDelimiter||ordercount;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'ADD_ROWDATA',vData);
fetch c2 into whipname;
end loop;
SET_CUSTOM_PROPERTY('BLOCK1.BEAN_AREA2',1,'ADD_DATA_TO_GRAPH','');
close c2;
END;
GO_ITEM('BLOCK1.CLOSE');
This uses the FormsGraph.jar file implementation as you can see. I know Frank Nimphius is the only expert when it comes to FormsGraph.jar at Oracle, but currently he is on vacation - so no official support to an unofficial (unsupported) charting implementation - but I thought there might be others who have done this before.
Can someone who implemented a pie chart share his/her code here - a simple pie chart, nothing fancy (like the one that comes with the graph90.fmb file, which I followed but did not figure out why my implementation is not working). Something with the vData string or number of vData strings requirement? no explanation in the FormsGraph.jar doc and I am not a java programmer to figure it out from the java source code. I am looking for a simple trigger code for the pie chart - not like "look at the forms90.fmb that comes with the demo package" kinda answer.
Thanx
Message was edited by:
zaferaktan
Message was edited by:
zaferaktan

Any idea ?

Customizing colour in Pie chart

Hi Experts,
In my scenario there is a Pie chart which shows the completion and pending of work in percentage. I have done this by creating a category and a series and the pie chart is getting displayed for completion and pending work in default colours. Now i want to customize these default colours, i need to display the completed status in Red and Pending status in green.
If this is possible please help me out in achieving this.
Thanks
Sarathy.

Hi Pandi,
For changing the chart type, size, layout, color, shading and also creating the title for you Bussiness graphics you have to go for Customizing . Right Click the Bussiness Graphi UI and Choose Edit chstomizing .
and bind your customising id in the context .
Go through this..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/ca932ebc-0901-0010-68a0-b4dd81a4bf81?quicklink=index&overridelayout=true
Also check this..
Re: Color Of series in Pie chart
Cheers,
Kris.

Pie Chart Legend not displaying full names

Hi All,
In a RTF template, we have displayed a PIE chart. In the PIE chart, when the number of legends are more, the legends are getting truncated on the generated PDF report. The document which describes the issue with screen shots is placed at [http://www-apps.us.oracle.com/~sgnanama/Pie%20Chart%20Legends%20Display%20Issue.doc] . And following is the snippet of code placed at ALT text of PIE chart picture present in the template. Is there any way to enlarge the legends display section to show the full text of the legends? Please share your thoughts. Thanks.
chart:
<Graph graphType="PIE" depthAngle="50" depthRadius="8" pieDepth="30" pieTilt="20" seriesEffect="SE_NONE">
<LegendArea borderColor="#cccccc" borderTransparent="false"/>
<LegendText wordWrapEnabled ="true"/>
<SeriesItems defaultBorderColor="#cccccc">
<Series id="0" color="#336699"/>
<Series id="1" color="#99ccff"/>
<Series id="2" color="#999933"/>
<Series id="3" color="#666699"/>
<Series id="4" color="#cc9933"/>
<Series id="5" color="#6666"/>
<Series id="6" color="#3399ff"/>
</SeriesItems>
<Title text="" visible="true"/>
<Footnote text="Company Contribution" visible="true" horizontalAlignment="CENTER"/>
<O1Title text="Company Contribution" visible="true"/>
<LocalGridData rowCount="{count(CATEGORY/ERC)}" colCount="1">
<RowLabels>
<xsl:for-each select="CATEGORY">
<xsl:if test="string(ERC)">
<Label>
<xsl:value-of select="CATEGORY_NAME"/>
</Label>
</xsl:if>
</xsl:for-each>
</RowLabels>
<DataValues>
<xsl:for-each select="CATEGORY">
<xsl:if test="string(ERC)">
<RowData>
<Cell>
<xsl:value-of select="ERC"/>
</Cell>
</RowData>
</xsl:if>
</xsl:for-each>
</DataValues>
</LocalGridData>
</Graph>

as far as i know only way to display legname in full when u have more values is to make the size of the chart large . i have one the req like that i made it large enough so that it will withstand if i get more values .
it may not be good idea but this is the way i did .

PIE Chart image si not displaying

i develop a pie chart using .net 1.1, crystal report.
when i run my application in my local meachine, the data is coming
but chart is not dispalying.
i am getting cross red mark in place chart and crystal report navigation button images are also not dispalying.
Thanks in advance.

Hi
Thanks for y'r response.
Data is correct, i am taking name as on change field value, and salary on show value.
i am not getting images of navigation buttons also.
i am doing my first application in piechart.
so i don't know how to check sort options?

How to Get Lines in Pie Charts

Using CF7 and WebCharts3D, and got my pie chart working. Only
problem, I can't figure out how to get it to show LINES from the
label of each pie slice, to the label's corresponding slice. The
pie slice labels (descriptions) appear outside the pie chart, which
is where I need them. But when you get a pie chart with a lot of
slices (say 8 or more) and a lot of smaller slices close together,
it's hard to tell which label applies to which slice. Hope this
makes sense.
All I need is to ADD A SMALL LINE from each label to it's
corresponding pie slice. I've looked for options in WebCharts3D to
do this, but can't seem to find anything (in the Decorations,
Series, etc., sections).
If this is possible (getting these lines to appear) could
someone please advise how to do this? Greatly appreciate any
help/advice. (It's probably something very easy, and I just missed
it).
Gary

I was afraid of that. Just wanted to make sure I wasn't
missing something. Thanks for the note and for confirming. Much
appreciated.
Gary

How to get rid of label shadows in Pie Chart?

Hi and thanks for reading.
Every time I create a pie-chart in Numbers08, there is a shadow around values and series labels. I looked in Text, Font, and inspector palletes but could not get rid of the shadow/glow around the fonts.
Any suggestions on how to disable it? this shadow is ruining my whole report.
This happens only in pie-chart, for some reason. If I change the chart to, say, bar chart, the shadow disappears, but switching to pie brings back the shadow.

Ashka, thanks for reply, unfortunately it didn't help. I do not have "shadow" option ticked anywhere. If I do tick the shadow, an additional shadow also appears, so this shadow is somehow built into the pie-chart by default. No matter what font of color I pick that shadow is there.
Here is a screen-shot:
http://www.piccdrop.com/images/1227030290.png
Thanks for your help.

Pie chart not getting

Similar Messages

Maybe you are looking for