Pie Charts causing Design mode to give warning and not preview the app
I am using the final release. I have pie charts in my app. I
also have column charts. Both are fed data the same way. Both work
as expected when i build the app, and there are zero errors in the
app. however, i was experiencing an issue in flexbuilder where in
design mode, a vague warning was issued and the preview could not
be displayed (blank except for very gernal 'outlines' of the layout
and controls)
I narrowed the problem down to the pie charts. Is anybody
experiencing this problem? The application worked as expected, and
previewed as expected in Design mode when previewd/built in Beta
3.
Hi masavran,
For this issue, it's related to the render environment (browser/application). On Reporting Services side, we don't have any properties to change the resolution for chart to make it smoothly. We suggest you post this thread on Visual Studio forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=visualstudiogeneral&filter=alltypes&sort=lastpostdesc
Or the forum of corresponding browser.
Best Regards,
Simon Hou
Similar Messages
-
Click the Firefox 4 icon. A window opens with the warning:
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features"
(There are no read/write restrictions on my Applications folder and plenty of room on the hard drive.)
Click OK and Firefox opens at the home page, but I cannot navigate to any other URL or link. I had the same behavior when I tried FireFox 3)First, use a specific [[Managing profiles|profile]] for Firefox 4.0 Beta and keep your current one for Firefox 3.6 to prevent interferences between both versions.
Then, see [[Could not initialize the browser security component]]. -
WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O.
Hi ,
I am getting below warnings in the user dump after upgrading to 10.2.0.5 from 9.2.0.1 on windows server (32 bit)
WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O. It is set to -1
Kindly let me know as to why these warnings are generated in the user dump.
SQL> show parameter synch
NAME TYPE VALUE
disk_asynch_io boolean TRUE
tape_asynch_io boolean TRUE
Thanks,
SachinWelcome to the forums !
This seems to be a known issue - pl see these MOS Docs
https://supporthtml.oracle.com/ep/faces/secure/km/BugDisplay.jspx?id=9772888&bugProductSource=Oracle
9772888.8 - Bug 9772888 - "WARNING:Could not lower the asynch I/O ... It is set to -1" messages
Seems to be fixed on 11.2.0.2 (or 10.2.0.5 patch 1 for Windows - see MOS Doc 342443.1 (10.2.0.x Oracle Database and Networking Patches for Microsoft Platforms))
Pl open an SR with Support to verify if this is a cause for concern, as it is not clear from these docs whether this causes any corruption
HTH
Srini -
I have just downloaded the trial After Effects CC. I'm running Mavericks 10.9.4 on my Macbook Pro.
When I try to launch After Effects, this message appears:
"After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy'"
I have followed the advice from other posts on this issue regarding resetting all of the permissions in the Adobe folder in my library to read and write , but it doesn't change anything. I still get the same message when I try to launch the program. Moreover, there is no After Effects folder in my Adobe folder, even though it's clearly in my Applications folder.
I also uninstalled After Effects and tried to reinstall it, but to no avail.
I sure would like to give it a try, as I was planning on purchasing it, but this is just one more issue in a long irritating line of issues that have arisen since trying to download it from CC.
Any help is much appreciated.
Thanks.I am having this problem and this response does not make sense. I made the "Preferences" ,"Adobe" & "After Effects" folder along with the 10.0,11.0,13.0,13.2 folders all read/write. Can't seem to find an answer.
-
I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?
uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Hi,
We have recently upgraded single instance database to 10.2.0.5 patch set 4 on windows server 2003 64 bit
After upgrading we are facing issue of number of warnings in trace files (bdump)
WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1
I know this is bug 9772888 and oracle suggest to upgrade to 11.2.x but we can't upgrade it now on early basis.
According to oracle it is useless warning and can be ignored but these traces are consuming more than 500MB space per day and we are unable to delete trace files as oracle countinously using those file for writting
it is production database kindly suggest solution other than upgrade.
trace files sid_sxxx_XXX.trc
if we set max_dump_file_size to XXXM or G will it resolve our problem?
or is there any way to flush warnings to new file and delete old one.
Please suggest
Thanks
shahduplicate thread.
I suggest you don't multipost.
I also suggest you upgrade from Windows 2003 (10 years old and probably desupported)
and 10gR2 (desupported for a few years)
Sybrand Bakker
Senior Oracle DBA -
Has anyone else had the following problem with Spell Tower? I was in the middle of a game in Puzzle mode on my iPhone and had passed the 63,000 point mark. I paused the game (as I had many times before). When I tried to resume the game, the game had vanished without any record. My wife had a similar problem in Tower Mode. In addition, the Apple support page says that, to report an issue, one should click on a specified link at the bottom of the information page for the App in question. There is no such link on the SpellTower information page. Fibonacci44
There are two separate issues here.
1. There is a potential problem with the game Spelltower. That needs to be discussed directly with Spelltower. My attempted emails to Spelltower have been bounced.
2. Apple, on its own webpage, purports to establish a procedure for reporting an issue with an app. But that procedure does not work with Spelltower because someone at Apple neglected to include a link on the relevant information page. I have been trying to find that contact info without success. Apple should take ownership of supplying that contact info. -
I want to give my old iPhone 4 to my grandson to use like an iPod Touch. Wifi only. How do I deactivate my info..so he can buy his own apps. and not have the cloud pushing all of my data to my old phone?
Just turning off Cloud will not prevent him from turning it back on.
Rignt now, if he uses the App store, iTunes thinks it's talking to me.First, turn off iMessage, FaceTime & delete the iCloud account, while your sim is still in the phone. Then: Settings>General>Reset>Erase All Content & Settings. Give it to your grandson & he gat then set it up as he wants.
Important your turn iMessage & FaceTime off to disassociate the phone from your Apple ID. Apple "claims" to have fixed this with iOS 6.0, but until I can absolutely confirm such, I still recommend you turn all of that stuff off first. -
WARNING:Could not set the asynch I/O limit
Every night database generate trace files with WARNING below
Does anybody knows what this mean?
WARNING:Could not set the asynch I/O limit to 252 for SQL direct I/O. It is set to 200
Oracle Version: 11.1.0.7
AIX 5.3As I said read metalink note 783128.1 or 759060.1.
There is bug 7409110. Look at it, maybe there exists patch. -
WARNING:Could not lower the asynch I/O limit to 160 for SQL direct I/O.
I have some traces with WARNING:Could not lower the asynch I/O limit to 160 for SQL direct I/O. It is set to -1, The OS is windows server 2008 R2 Service pack 164 bits and Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production, How i can solve this warning???
Welcome to OTN
Also Read MOS Note :
Warning:Could Not Increase The Asynch I/O Limit To XX For Sql Direct I/O [ID 1302633.1]
Bug 9772888 - Needless "WARNING:Could not lower the asynch I/O limit to .. for SQL direct I/O It is set to -1" messages [ID 9772888.8]
"WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1" After Upgrading To 10.2.0.5 [ID 1155445.1] -
I have received 3 friend requests via email but I cannot accept them. When I select view request, it just gives me directions on downloading the app and there are no requests in my app. How do I accept the request?
Which "app" are you talking about?
-
My iPhone 4s is locked in speaker mode where it tells me every time I touch a new app and it outlines the app I touch and requires me to touch the screen twice in order to advance. Please help me remove this setting
Explore Settings > General > Accessibility. Around page 128 of the User Guide is probably appropriate.
The User Guide is available at http://support.apple.com/manuals/ or downloadable from iTunes as an iBook. -
i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game
I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine? -
Lightroom 5.4 is getting stuck in full screen mode. I need to force-quit the app in order to re-start and use again. How can I fix this?
I am using Mac osX 10.9.2
I can see that I am not the only one with this problem.LOL... this is what I just had to look up... it's not exactly clear or apparent, is it?
When in Full screen mode.. just press Command-F. Voila! -
Firefox causes crash when using Youtube explorer does not have the same effect
firefox causes crash when using Youtube explorer does not have the same effect
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.
Maybe you are looking for
-
Hai all, If we have an invoice, in ODS, its can be uniquely identified with a key(combination of, for example, company code, customer, sales district etc.) But how can we identify a unique invoice in Cube. I know that the basic model of ods
-
Cannot print the report on Window 7 64 bit
Hi all, I try to print the report using Print icon on Crystal Report Viewer but it does not print out and no error display. Any idea how to fix it? Is it a bug when print on Window 7 64 bit OS? Thanks.
-
What is the underlying issue? Here are the symptoms...
I have a combination of issues here, and they all seemed to be linked but I cannot wrap my head around it. Here goes: (1) System Preferences freezes when I try to alter trackpad settings (2) Mac Software Updates will not install and cites an "input/
-
Monitoring SMD Agent with CCMS
Hi gurues, I need to know if there is any way to monitor SMD Agent installed in an application server via CCMS CEN system on a Solution Manager. Right now we have CEN Monitoring define on Solution Manager, and several SMD Agents over the whole landsc
-
Copy Access Table(s) to Oracle
I use Oracle SQL Developer version 3.2.20.09 "Copy to Oracle..." to copy table(s) from MS Access 2007 to Oracle 11g R2 database instance. All the tables from Access will go to the system schema, even if I choose a connection which connects to a speci