Pie thingy not showing black

I did a firmware update to my Airport express and ever since I did that I've been having 'issues'. One of them is that my pie thingy won't show black. It's greyed out. However, I don't know if I'm a tad obsessive about this because I can still connect to the internet (I'm connected via Airport Extreme to my modem)And then when I check to see which network I'm connected to, I get this weird Apple Network with numbers and letters following it which I never set up as well as my original network that I did. One of my laptops can still connect to the network, the other can't. Plus my Airport Express won't work anymore either. SO frustrating! Any help would be much appreciated.

The only two options that I can suggest at this point, are the following: 1) Perform a "factory default" reset on the AX, and if that doesn't resolve the problem, 2) Reinstall the earlier version of the firmware.
If you elect to reinstall the earlier firmware, here's how:
o Open AirPort Utility.
o From AirPort Utility menu, hold the Option key and choose Check for Updates....
o Select (place a check mark beside) the version you require.
o Click Download.
o Select your base station then choose Manual Setup from the Base Station menu.
o From the Base Station menu choose Upload Firmware....
o Select a firmware version and click OK.
(ref: http://docs.info.apple.com/article.html?artnum=305301)

Similar Messages

  • Pie Chart not showing

    Hi
    I'm trying to display a pie chart in the WAD, I have a query associated to my Data provider, but it doesn't display properly. I'm running WAD 3.x and support package 7.
    I tried to use different charts and it seems to display my results fine.
    Any ideas why this is happening?

    MIcelle,
    Te issue might be with the way the data is structured in the query..
    Copy the data onto a separate sheet and then generate an EXCEL pie chart and change the table structure till you get the format of the graph as desired , now all you need to do is get the quer in the same fomat and you should be good to go.
    The graph on the Web depends on the IGS , for Excel , it is based on Excel's charting engine and has not much to do with notes.
    Hope it helps..
    Arun
    Assign points if helpful

  • Will not print b210 new black cartidge installed test run does not show black ink

    It will not print, I replaced the black ink cartidge and it says it is full now, but when I ran a report, it doesn't record any black ink and it will not print. We have tried three differnent black 564XL ink cartidges.

    lf you figure out what to do please share...We tried three different cartridges. It scans fine, but will not print.i I rebooted it several times too....what is the batch number on your cartridge?I'm wondering if it's just a bad baTch. We tried two different Staples stores, where did you get your cartridge?

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • HT1384 My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?

    My ipod nano 3rd generation, when connected by usb, does not show up in itunes, does not show up on my computer, does not seem to charge by the wall charger. It just has a black screen. Any ideas for me?
    I've run diagnostics. Can't find device. I've tried resetting. The toggle has been turned on and off.

    Cable works fine on my other iPod. Reset by pressing menu and center button together for 6-10 seconds. Left it to charge for many hours. Started acting up while running. Suddenly the music stopped playing but my Nike + was still working for the rest of my run. Took it straight it home and plugged it in to the wall to recharge since the battery was fairly low. Looked like it recharged ok but then screen went blank and now does it not show up on iTunes, does not seem to recharge by the wall charger (apple wall charger plugged into a surge protector in India). I have turned the hold switch off and on many times.
    Sounds like a repair issue, which is not easy to do in India :(

  • HP Photosmart Premium c 309g will not print black, all other colors fine. Shows ink levels fine,

    Have photosmart premium c309 g connected wirelessly to I Mac and Mac book pro.  The unit suddenly will not print black.  Ink levels show all good.  All other colors print fine.  When check HP utility and go to print quality diagnostics, a box appears that states cannot print PQ page--make sure printer is turned on.  If I tell it to print a page, it immediatly connects and prints all colors but not black.  How can it print regular page but not receive message to print PQ page?  "make sure printer is on" ??

    I have this exact same problem with the same printer.  Printer will not print black. My macbook pro is connecting to the printer but shoots out a blank page.  I just put in a new ink cartridge even though it was not low on ink.  Please help.

  • HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system

    HP business inkjet 2800 Print black only option not showing in Windows 7 64 bit operating system
    Please help, if any one knows any solution.

    Hi @Firoskhan,
    Welcome to the HP Forums!
    I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
    Hope this helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Will not print black. ink cartridge is new. also shows low black level with new cartridge.

    HP Photosmart C6180  all-in-one.  Will not print Black.  Also shows low black ink on ink level.  Cartridge is new and HP brand.
    In printing colors, very light and has RED hue as there is no black.  Also two other cartridges show low ink when all the cartridges have been replaced.

    Hi there,
    Download and run the print and scan doctor located here (amoung resolving some things automatically it can give us a better idea of what is going on with the printer). Give the steps outlined a shot and let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black, when I try to synchronise my ipod to my library it comes up with a message saying "iTunes could not back up the ipod because a session could not be

    Does anybody know why my ipod touch 3rd generations screen does not show anything? The screen is all black constantly. When I try to synchronise my ipod with my iTunes library it comes up with a message saying " iTunes could not back up the ipod because a session could not be started with the ipod. Please help and reply if you know an answer!!!

    Try this previous discusssion:
    https://discussions.apple.com/message/12518406#12518406

  • HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

    I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

    Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
    I hope I helped
    thanks
    Lydia

  • I am totally new - first time.. I drag picts to the show and push play and for some reason they just show up as black.. the picture is not showing- clearly I have pressed some wrong button but have no idea what to do.. please help!!

    I drag picts to the show and push play and for some reason they just show up as black.. the picture is not showing- clearly I have pressed some wrong button but have no idea what to do.. please help!!

    I drag picts to the show and push play and for some reason they just show up as black.. the picture is not showing- clearly I have pressed some wrong button but have no idea what to do.. please help!!

  • When I "enhance" a photo, it does not show up in slideshow, it is just black

    When I "enhance" a photo, it does not show up in slideshow, it is just black.  I am using Iphoto.  I also can't email these "enhanced" photos.

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • IPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black.

    iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ?  I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.

    What version of iPhoto are you using?  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

    If the Reset didn't work, you'll need to do a Restore.
    From iTunes, select the iPad and then select the Summary tab.  Follow directions for Restore.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad.

  • The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

    Hello,
    I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

    Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

Maybe you are looking for