Piechart not taking the exact values of table

Hi,
I am using the pie chart in WAD
EX:- I have the data like this
Material        Revenue%
1     65%
2               12%
3               10%
4                7%
5                2%
                100%
when we add these values 65121072= 96%
Now when I see my pie chart , its not picking the values from table instead its rounding up the values to make the overall total in the piechart to 100
Material        Revenue%
1     68%
2               12%
3               10%
4                8%
5                2%
                100%
but I want to pick my table values ,how can this be done
Thanks
Priya

Hi,
Go to edit chart in the chart web item properties , it displays he chart designer.
IN the chart designer for pie chart go to the value properties( click next until u get step 3 out of 6-value properties).click on each categorz and in the for the label properties select "VALUE" instead of "PERCENT".
Hope this will help you.
venku

Similar Messages

Cancellation of confirmation not taking the default value

SAP SRM 5.0 , Extended Classic Scenario
CCM 2.0
This is the query related to Cancellation of confirmation .
1) Requisitioner has created a SC of value 29,105.66 GBP , quantity 1each, dated on 28.07.2010 1
2) The Purchase order is created on the same day 28.07.2010 and copy is available at the backend
3) Confirmation of same value 29,105.66 GBP is created on 02.08.2010
4) Invoicing is done for four different quantities and value on the same dat 18.08.2010
                0.762 each    22,170.40 GBP
                0.022 each         641.68 GBP
                0.153 each      4,455.00 GBP
                0.025 each        727.50 GBP
The complete invoicing is not done for the total PO amount.
5) Now the cancellation of confirmation is performed before credit memo for the invoices on 26.08.2010
6) Credit memo for four invoices are done on dated 26.08.20109 ( Same day after cancellation of confirmation)
Problem : While Cancellation of confirmation the default full amount is not coming.
                It picked up some other value 29100.60 GBP in place of confirmation value 29105.66 GBP.
We are just wondering how it can happen since we know that for creating confirmation we can change quantity as one of the Parameter. And if we do cancellation of confirmation it take the deafult value which is set up for confirmation.
Just wondering how it is picking up another value 29100.60 in palce of one 29105.66 GBP set up for confirmation.
Thats why we are unable to delete PO since Cancellation for 5.06 GBP is not done and still exist in the system
Cancellation done for amount 29100.60. Confirmation created was amount 29105.66 GBP.
Note : Cancellation of confirmation is done before the credit memo for four invoices on the same day.
Please advice.

Many Thanks Virender,
We have tried the option what you have suggested , still the problem persist. Plesae advice.
We have done the below mentioned steps and did not get sucess though.
1. We have created invoice of qty 0.038 & value 1,111 GBP.
2. We have created credit memo for the same.
3. Then created confirmation for 29,105.66 & qty 1.
4. Reversed the same confirmation.
Please let us know where we are missing. Shall we need to do confirmation for qty 0.038 and then reverse?
Actually we have tried doing invoice-confirmation for whole qty 1- credit memo-confirmation cancellation but again amount it increases instead of nullifying.
Kindly guide.
Thanks & Regards,
Jayoti

How to create a graph for the exact values in pivot table

hi all,
how can i create a graph exactly that shows pivoted values. i created one pivot table and deleted the table view. when i am creating the graph it is not showing the graph for pivot table values.

for that you need to edit the pivot table properties and then select graph pivot results tab in the top middle .. hope this helps

Rounding Off is not rounding the net value in Debit/Credit Memo

Dear Experts,
Please guide me in the below mentioned situation:
I have used "Rounding Off" i.e. DIFF condition type in the pricing procedure and it is giving the desired result. But when I am creating Credit/Debit Memo, the Rounding Off is taking that value which it has taken to round the total value in creating billing document. As a result in many cases, while creating Credit/Debit Memo the Rounding Off is not rounding the net value of the document.
Please guide me how to solve this problem.
With regards,
Jhelum Roy.

Thank you sir for this information. this is really helpful.
Further
My requirement is to capture this rounding value also and show it in the print and carry to GL account. So that client can generate a report on this extra revenue by rounding values.
I ahve only condition type in my rpicing procedure as per my requirement. details maintained are below
condition typr: ZPPC
Mandatory: X
print : X
requirement : 2(Item with pricing)
cal type: 17 (Rounding as perT001R)
Acc Key: ERL
in the table T001R table the calue maintained for Co.Code is+currency is 5(so that system is alsays round up 5)
tha t means if the value is 26.03 then it will become 26.05. This is working fine. but how to capture this 0.02 seperatly and carry to gl accouns
Thanks you in advance
Kiran Musuku

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

The Informatica maps are not taking the parameters from dac

Hi All,
The Informatica maps are not taking the parameters from dac. We have tried setting the parameters at DAC level, task level. The parameter file is getting generated by DAC and has correct values as we expect. But when we run a full load from DAC, the initial date in Informatica is being taken as 1/1/1753. Do we need to specify the parameter file name at workflow level?
Is there any setting that we are missing. Please guide us and let us know the steps we should take to make sure that the parameters that we set at DAC level get passed to the Informatica maps. Also mention this is happening only with dates and other parameters like data source num , soruce and target database information is getting passed to Informatica maps.
The version of Informatica as 7.4.1 and dac version AN 328, Build date Aug 8 2007.
Please Help me in this issue.
Thanks in advance for all members.

Hi Ananth.v
Try to make sure that your parameter file's path in Infa is in-sync with the path of DAC files being generated.
The date you are getting seems strange - which are your Source/Target DB platforms?
In general take a look at [this thread| http://forums.oracle.com/forums/message.jspa?messageID=3405906#3405906] , it may make some thing clearer for you.
Hope it helps,
Please post if you found a solution,

Freight value not taking in net value--Urgent

Hi,
While creating purchase order freight condition valude FRB1 not taking in net value.
Please help its is urgent.
Regards,
Ravindra

Hi Ravindra
You need post seperate invoices in case where the vendors are different, If the supply vendor and freight provider are same, you can post both costs in once invoice. Select the goods+delivery costs to make one invoice verification.
In general, freight value will not be added even the vendor is same. Inturn both item cost and delivery cost are processed in one invoice.
If you want, you can include the freght in net by maintaining the freight condition as not an accrual.
But, just for this sake, you should not modify your pricing procedure.
warm regards
sairam akundi

COPA Derivation Rules are not assigning the correct values

COPA Derivation Rules are not assigning the correct values when we process billing documents in batch. We currently have derivation rules defined to take the ship to country and refer to custom tables were we identify custom geographic groups (INT/DOM and EAM, AP, etc.). The derivation rules work accurately when the billing documents are created individually, and more than 75% of them are accurate when generated in batch, but in some circumstances, it populates the derived values with the wrong field and we can not identify where or why that's happening. It looks like it may have something to do when the ship to customer number account group is different, but that's not consistent.. Does anyone know how or where these values get populated, or have any ideas why incorrect values are appearing sporadically throughout the billing run? Thanks!!!

Leigh,
Apparently the function module is changing the values for some billing docs. Check one of the following user exits, if it gets triggered and the values are changed:
COPA0001 Enhancement for derivation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEDRCOPA_001
COPA0002 Enhancement for valuation in Profitability Analysis (CO-PA)
Function Module: EXIT_SAPLKEAB_001
COPA0003 Enhancement for assignment to profitability segment (CO-PA)
Function Module: EXIT_SAPLKEAK_001
COPA0005 Enhancement for actual data update (CO-PA)
Function Module: EXIT_SAPLKEII_001
Function Module: EXIT_SAPLKEII_002
Award suitable points if the above helps. You can also reach me at [email protected]
Thanks
Ajay

How can I validate a dropdown box to NOT accept the default value?

I have a fillable form where I need the user to select their "Number of Employees". I have added several ranges as their options in a dropdown box (1-10, 11-25, 26-50, 50+). My issue is the "defult value" is set to "1-10" and people submit it without changing it to the correct value.
I have changed the default value to "--Select One--", but it still lets them submit the form with that value entered.
I am assuming I need some sort of validation script that will basically say - "If the value in this field is --Select One-- do not submit the form, but give an error that says 'please select your number of employees" or something along those lines.
Basically I just want them to pick something as opposed to just submiting it with the default value.
I have looked all over and am not very good with JS.

You can not have the default value set to a real possible value. You need a value that should be selected.
Then for your submit script you need to test all of your required fields to make sure they are not at the default value.
You make a variable that assumes all the required fields are completed and then check each field and if any one still has the default value you set your variable to "false" and then when you have checked all the fields you test your variable's value and only if it is true to you submit the form.
var bSumbit = ture; // logical variable for submission test
// test drop down # of employess
this.getField("Number of Employees".).required = false; // clear required property
if(this.getField("Number of Employees".).value == "--Select One--") {
bSubmit = false;
this.getField("Number of Employees".).required = true; // set required property
if(bSubmit) {
// your submit acation;
} else {
app.alert("Not all required fields properly completed", 0, 1);

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

In smartforms the quantity field is not showing the perfect value .

In smartforms the quantity field is not showing the perfect value because the point is shifting left
insted of showing 8.10 it is showing 80.00.

Hi,
Dont use the quantity field same as that it come from interface Fm declare one field for quantity in the global settings and write the logic to pass the value to that field and pass that global value to the particular texts...same is the case with currency fields also.
Regards,
Rohan.

The parameter 'host_name_full' of ICM not showing the right value

Hi ,
The parameter 'host_name_full' is not showing the correct value.
It is still showing the value as fully qualified domain name, where as we have reverted the setting some time back .
can anyone let me knwo from where does it pick up the value from .
and how can i Edit the value to show the correct value
Thanks
Nikhil

Hi Nikhil,
Check this 2 links will be useful to u r query...
http://help.sap.com/saphelp_nw04/helpdata/en/e7/7af83b0255a206e10000000a11402f/content.htm
http://www.basisconsultant.com/modules.php?name=Content&pa=showpage&pid=12
Regards,
Sridhar

Error :Value of restricted LOV parameter not among the selectable values

Hi,
I am designing a report which has two layouts. I have a parameter :P_Reason_code which is applicable to only one layout.
There is a repeating frame in my first layout which should display only if :P_Reason_code value is 'Y'.
I have wriiten a format trigger for this repeating frame saying the repating frame should return true if :P_Reason_code value= 'Y'.
else, it should return false meaning it shouldnt display.
:P_Reason_code is an optional parameter when i run it at the oracle apps front end.
The problem that i am facing is that when i run the report for the second layout by not providing value for the parameter :P_Reason_code
, it errors out saying "REP-0788: Warning: The value of restricted LOV parameter P_REASON_CODE is not among the selectable values.'
I tried creating another user parameter P_REASON_CODE1 and putting a trigger in the After parameter form trigger saying
if P_REASON_CODE is null then
P_REASON_CODE1 :='Y';
P_REASON_CODE := P_REASON_CODE1;
ELSE
P_REASON_CODE1 := P_REASON_CODE;
P_REASON_CODE := P_REASON_CODE;
END IF;
But still it doesnt seem to work.
What could be the issue?
Can anyone help?

try setting the default-value for the parameter to Y (or whatever value is in the LoV defined for the parameter).
Is there a parameterform used for the report. If not remove the LoV from the parameter.

Help! My phone is not taking the whole screen! (edge around the screen)

I ve only been using my phone for less than a week. Today my phone was frozen so I hold down the home and the power button to do a reset. However, the apple logo appears and it took forever to get in the home menu so I hold down the buttons to reset the phone once again. The phone did get in the home screen after the second reboot but after that the size of the screen got smaller (Not taking the full screen) I turned off my phone and while I was under the sun i noticed that there is an edge around the screen! It is so noticable even I turned off the phone. So I used a full restore on my phone and now the edge is still there! Can anyone please tell me if they have the same problem before and know how to fix it(Like resizing the screen)? Thanks!!

Is it a thick border? or just a couple rows? Mine has that, and a lot of electronics have the same thing... they cut the size they need and only use the pixels they want/need to use.
For example I had a Zune and a new Nano that had the same thing... My Blackberry, and work cell phone... same thing.
If its a thick border, then yes call apple and get it replaced/repaired.
Message was edited by: Kalison

How to not repeat the column values if repeated on next line and so on..?

Hi all,
The XmlP template that is designed gives me the output as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 695.00 cad
abc 2 1000.00 100.00 95.00 695.00 cad
abc 3 1000.00 100.00 95.00 695.00 cad
But my requirement is as follows :
COL1 COL2 COL3 COL4 COL5 COL6 COL7
abc 1 1000.00 10.00 95.00 795.00 cad
- 2 - 100.00 - - -
- 3 - 100.00 - - -
Note : "-" indicates blank column values (gaps are being filled)
How do I not repeat the column values if repeated?
Please let me know if you have answer for it?
Thanks in Advance
Munna

Iam trying to design the xml publisher template using xmlp template builder.
My requirement is :
For a receipt number, I have receipt amount, applied amount, unapplied amount and on account amount. And for each receipt, there can be multiple applied amount ( as the receipt can be applied multiple times), but the unapplied amount, on account amount and receipt amount is single.
By using the logic as said above from http://blogs.oracle.com/xmlpublisher/2007/04/13
Iam getting the output something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|-|-|
1112|-|228.98|-|-|
My requirement is to go get something like this:
Receipt Number| Receipt Amount | App Amount |UnappAmount|OnaccountAmount|
111-b|249.28|249.28|0.00|0.00|
1110|1,000.00|10.00|95.00|795.00|
1110| -|10.00|-|-|
1112|1500.00|1,271.02|0.00|0.00| ---> here lies the difference
1112|-|228.98|-|-|
How do i check the duplicate of the column values only for a receipt number??
Because as for receipt no. 111-b the unapplied amount and on account amount is 0.00, the the unapplied amount and on account amount for receipt number 1112 is getting hided( because its a duplicate) . In reality, it should be 0.00 and any other line for that receipt number (1112) should be hided. except for the applied amount.
Note We can see that last 2 columns in the last record( for receipt number 1112) is getting hided that is as expected but for 4th record the unapplied amount and on account amount should be 0.00 respecively.
'-' indicates hided value
Please help.
Thanks in Advance

Piechart not taking the exact values of table

Similar Messages

Maybe you are looking for