Pilotage d'un appareil & Max : erreur Hex 0xBFFF0011

Bonjour à tous,
Je souhaite piloter un analyseur vectoriel ZVL de chez R&S.
J'ai alors créer un réseau local entre mon pc portable et le zvl.
Le ping fonctionne juste en remplaissant l'adresse IP et le masque.
Maintenant le problème est que sous MAX, j'ai du mal à ouvrir "l'Open visa test panel"! Je ne souhaite pas continuer sans cela puisque j'ai été voir quelqu'un qui m'a dit qu'il n'était pas judicieux de continuer si la console pour tester les commandes ne marche pas.
Voici l'erreur rencontrée :
Error opening resource:
TCPIP0::192.168.0.3::FSx-000000::INSTR
VISA:  (Hex 0xBFFF0011) Les informations concernant la position sont insuffisantes ou bien soit le périphérique soit la ressource n'est pas présent dans le système.
J'y ai tout le temps droit depuis et ça commence à être énervant.
Merci d'avance pour votre aide

Re Bilsix,
J'ai installé mon oscillo avec l'assistant Driver VISA.
résultat : je le voie en USB mais RAW et non INSTR. ici avec le gestionnaire de périph
ici avec Max
Je peux communiquer avec lui sous Max par VISAIC mais j'une une erreur ???
Par contre, je ne le voie toujours pas sous LV avec resourceVISA ??
Si je lui donne un nom avec Max (VISA Alias on my system), je peux le voir en "Nom Logique IVI" mais mais VIs hameg me demande une resource VISA, pas IVI (fil brisé).
C'est pas gagné 
FcRd

Similar Messages

  • VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.

    I had labview software running and talking to all instruments.  added a agilent E4440a psa to the GPIB bus and now my code does not run.  even when i build a vi from scratch it keeps giving me this error and no communication to equipment.  any ideas what happened or how to fix it??
    this is the Error code  -1073807343   source VISA Open in Keithley 24XX.lvlib:Initialize.vi->Untitled 1  and the error explanationVISA:  (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system. 
    I opened MAX and can query all equipment.

    That's quite alright. I didn't think it was offensive. Please see the screenshots attached.
    Thanks a lot,
    Pablo
    Attachments:
    DevMgr-Gral.JPG ‏175 KB
    MAX-Gral.JPG ‏168 KB
    MAX-PortStgs.JPG ‏138 KB

  • Tek_tkdpo4​k initialize with options vi driver (hex 0xbfff0011​) primary error (hex 0xbfff0011​) insufficie​nt location informatio​n or the request device or resource is not present in the system

    Dear Friends,
    I am from Jesus Osorio from Tektronix Mexico. I have seen this error messages during the last instalations and I am wonder how could I solve it?
    tek_tkdpo4k initialize with options vi driver (hex 0xbfff0011) primary error (hex 0xbfff0011) insuff...
    I am using DPO4000 series, laptop with SE for Tektronix Edition and a USB cable. What should I do to solve this problem?
    Regards,
    Jesus Osorio
    Jesus V. Osorio Lopez
    AE

    Dear Jesús,
    You should check if you have on your PC or Laptop installed VISA. I recommend you this link to download it:
    http://digital.ni.com/softlib.nsf/websearch/b1a783​7fffd2826e8625729100689d3c
    To have a better oportunity in having your issue solved, please contact us in Mexico at this toll free 01 800 010 0793. As well as if you post your following messages in the Spanish Forum, we will be able to help you faster.
    Thanks for using National Instruments Forums.
    NorSa
    NI Applications Engineer Latin America
    NorSa
    NI Applications Engineer Latin America
    Para Soporte entra aquí

  • Erreur de VISA read et bug d'affichage pour acquisition données via balance mettler

    Bonjour,
    Je dois faire une acquisition de données depuis une balance mettler, j'ai fais mon programme qui marche bien, sauf 2 choses:
    1) J'ai une erreur dans un VISA read que je ne comprend pas. Le message de l'erreur est le suivant: 
    L'erreur -1073807343 s'est produite à : Nœud de propriété (arg 1) dans VISA Configure Serial Port (Instr).vi->programme balance-5.vi
    Raisons possibles :
    VISA:  (Hex 0xBFFF0011) Les informations concernant la position sont insuffisantes ou bien soit le périphérique soit la ressource n'est pas présent dans le système.
    Raisons possibles :
    VISA:  (Hex 0xBFFF0011) Les informations concernant la position sont insuffisantes ou bien soit le périphérique soit la ressource n'est pas présent dans le système.
    2) Je souhaite afficher l'identifiant de la balance ainsi que la mesure en continue du poids, tout cela dans deux indicateur différents. Tout marche bien sauf quand j'actionne certains boutons, que j'ai fait comme le zero de la balance, l'affichage du l'Id de la balance se fait dans l'indicateur de la mesure du poids et inversement. 
    Malheureusement je débute en LabView et ne suis pas habitué à la programmation graphique, donc je suis un peu nul pour détecter les erreurs dans un code.
    Si quelqu'un peut m'aider ce serait super et je met mon programme en pièce jointe (désolé si le code est pas d'une propreté maximal, mais j'ai vraiment pas l'habitude de coder en programmation G)
    Merci
    Salutations
    Pièces jointes :
    programme balance-5.vi ‏62 KB

    Bonjour,
    Voici la discussion traitant de ce type d'erreur : erreur -1073807343 dans visa open
    Cordialement,
    Steve M.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

  • I am using HP 4263ALCR meter, and I am trying

    to use the driver to make impedance measurements. when I go to getting started and try to run it, an error messagge appears, VISA Open inError -1073807343 occurred at VISA Open in Error HP4263A Initialize.vi->HP4263A Getting Started.vi->HP4263A VI Tree.viwhen I go to getting started and try to run it, an error messagge appears, VISA Open inError -1073807343 occurred at VISA Open in Error HP4263A Initialize.vi->HP4263A Getting Started.vi->HP4263A VI Tree.vi

    to use the driver to make impedance measurements. when I go to getting started and try to run it, an error messagge appears, VISA Open inError -1073807343 occurred at VISA Open in Error HP4263A Initialize.vi->HP4263A Getting Started.vi->HP4263A VI Tree.viIf you were to right click on the error code and select "Explain Error", you'd get the following:
    VISA: (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
    Are you sure that you specified the correct gpib address. You can check this in Measurement and Automation Explorer (MAX). Under Devices and Interfaces, you should see your gpib card listed. Right click on this and select "Scan for Instruments". Your instrument should be found. If you highlight the instrument and select properties, you should see something like "GPIB::3::INSTR". Type this value into the VISA Resource Name control or just click on the select arrow of the control to see the list of all available resources and select the one
    you want.

  • Error-1073807343

    いつもお世話になっております。
    オシロスコープとBERTを使用した測定を実施しており、LabviewはEXE形式でずっと使用できていたのですが、
    急にTektronix CSA8000Bの初期設定時に以下のエラーが発生しました。
    Error -1073807343 occurred at tktds8k Initialize.vi
    Possible reaqson(s): Driver Status: (Hex 0xBFFF0011) Insufficient lobation information or the device or respurce is not present in the system.
    以下のことを実施しましたが、エラーは解消されませんでした。
    -tktds8k.llb再インストール
    -NI MAXでGPIBの接続確認>>異常なし
    -測定器、PCの再起動
    何か解決策があれば教えてください。よろしくお願いします。

    この件、解決いたしました。
    オシロでのエラーなので、オシロのみを再起動して確認していましたが、
    GPIBで接続されているすべての測定器を再起動することにより、エラーが解消しました。
    ご参考まで。

  • Launching an app via system exec behaves differently to launching it outside LabVIEW

    Hi,
    My problem is as follows:
    I am trying to write some code to communicate with an Anritsu unit (MT1810A chassis with MU181020A plug-ins) via ethernet.  Anritsu supply a standalone app to control this instrument (MX180000A.exe) which gives comprehensive control over the setup & config of the instrument.
    I want to control this unit via LV however without recourse to their program.
    The only time that either MAX or LV seem to be able to successfully communicate with the unit is when the supplied Anritsu app is running.  Not only that, the app must be opened manually, ie by clicking on the exe (or selecting it from the Start --> Programs etc menu) or using cmd prompt with exe path.  Once the app has been started this way, MAX can talk to the unit and any LV code executes without error.
    If however I use the system exec vi within LV to launch the Anritsu app, the app opens as normal, is able to control the unit however MAX now has an exclamation mark on the VISA resource - status shown as:
    VISA returned this static device when finding resources, and MAX could use VISA to parse the resource name. MAX could not succesfully open a VISA session to the device.
    and it can no longer talk to the unit.  In addition any LV code now generates the following error when trying to open a VISA connection to the unit:
    Error -1073807343 occurred at VISA Open in BER Initialize.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
    So, getting to the point -
    - Why the difference in behaviour depending on how the app has been opened?
    (oh and of course, how do I fix it? )
    Regards
    Andy
    System is running XP, LV version 8.5, VISA 4.2
    Unit needs to be added to MAX using manual entry of raw socket, ie
    TCPIP0::192.168.1.21::5001:OCKET
    There are 2 network cards in the PC.  The unit is connected to card 2 which has been specified as the default in the network control panel.

    Hi,
    Here is a KnowledgeBase article that might help concerning the error you're receiving. Do you see this behavior on multiple PCs as well?
    Amanda Howard
    Americas Services and Support Recruiting Manager
    National Instruments

  • Full screen preview drops frames

    Hi all,
    A continuation of the thread I opened here (with hardware specs for information):
    http://forums.adobe.com/thread/657008?tstart=0
    Whilst I resolved the tearing issue secribed in the previous thread I still can't get smooth playback on the third full screen preview display and I'd like some basic advice as to what I could do:
    A couple of things I have tried - firstly I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access), and then also tried two screens rather than three (so only one graphic card was in operation), a 60p/30p project with screens set to 60Hz and a 50p/25p project with screens set to 50Hz.
    All to no avail - the full screen preview drops frames, especially with 50p content - 25p is better but every 20 seconds or so frames are dropped. Audio is always fine, regardless of the source, BTW.
    As a reminder, this is a 12 core i7 with 2 x Quadro FX3800, all unnecessary services disabled, 12Gb RAM, CS5 5.0.3, latest WHQL Nvidia drivers.
    Not sure if 5.5 improves this in any regard as I'm still waiting for my licence key.
    Video playback outside of premiere is perfect, 1080p50 plays fine full screen on any display through windows media player/VLC.
    Any suggestions please - again I wonder if a Blackmagic Intensity or similar would help?
    Has anyone else seen this behaviour? Could anybody have a go a reproducing the issue (a simple spinning or sliding jpg demonstates the issue easily and simply)
    Thanks all
    Sacha Goodwin.

    There exist no 12 core i7's. The max is hexa-core, but in your previous thread you said Xeon X5670. So what is it?
    Well spotted, my bad - it is indeed 2 x hexa-core X5670's - which of course is 12 cores in total.
    I still suspect your Editshare NAS.
    I'd say unlikely since - we've replaced it with something else, also:
    I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access)
    and at any rate I tried it as a local project on local disks and it made no difference.
    For graphic read plain color matte and basic SD res JPG (same results with either)
    What happens when you increase memory to 24 GB?
    No idea as I don't have access to any - strikes me as odd though to think anyone would need 24Gb or RAM just to display a rotating still smoothly.
    Premiere is showing 300Mb of RAM, total RAM in use when everything is loaded and running is 3Gb, 9Gb free sitting there twiddling it's virtual thumbs.
    BTW I should also mention that this happens even on SD projects, not just HD ones. Also watching the task manager shows virtually CPU usage, no disk and no network access during playback (as I would expect). No peaks in any graphs correllating with the dropped frames. Also enabling/disabling MPE Hardware assist makes no difference.
    Sacha.

  • 9802 with 9870 (serial comms) in Hybrid mode not working

    Hello,
    I am developing a project with several IO modules in FPGA and a 9870 RS232 module in Scan Engine so that I can use the VISA vis instead of custom FPGA code. This was all working well on a 9025 controller in a 9114 chassis.
    We just changed over to a 9082 controller and this is no longer working. On a bare bones test project, If I set the chassis to Scan Engine, the serial ports are found with the VISA Find Resources vi  and open with no error. When I switch to FPGA, the ports are not found and an open returns an error -1073807343 - VISA:  (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
    I have followed the instructions in
    http://digital.ni.com/public.nsf/allkb/0DB7FEF37C2​6AF85862575C400531690
    and have been successfully working in this environment for several months with the old  hardware.
    Specifically, the 9870 is under the chassis and the IO modules are under the FPGA, a stub FPGA has been compiled and downloaded, the chassis is deployed after changing, I believe all required software has been downloaded, etc, etc.
    Has anyone ever tried this scenario?
    Thanks,
    PJ
    Attachments:
    Blank_9802.zip ‏46 KB

    wonder wrote:be sure that the modules are loaded. lsmod | grep vbox.
    for bridged you have to load vboxnetflt
    Thanks a bunch...
    sudo modprobe vboxnetflt
    did it.

  • Multiple VISA Operations in one VI

    Hallo!
    Im a new programmer currently trying to create a VI for data acquisition using the Agilent 34970A DAQ unit. At the moment im trying to merge the current, voltage and temperature acquisition VIs into one VI. I have manually added the separate VIs together. However when I try to take readings, ie, run the VI, I seem to get VISA write errors from each of my separatre acquisition VIs. The error is the same in each, it is an error out message saying it is a VISA write error in my program. Asking LabVIEW to explain comes up with this message:
    Error -1073807343 occurred at VISA Write in Merge 1.0s.vi
    Possible reason(s):
    VISA:  (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system.
    Any help is much appreciated. Thanks very much!

    Hallo!
    Looked through the tutorials page.. The list is v long..
    Did what you suggested and used only one loop.. but added a sequence structure INSIDE the loop so the three VIs run concurrently.
    This seems to work fine, but somehow the sequence structure in the while loop generates some run/stop problems.
    When stop is clicked (the while loop stop) for the first time the program keeps running. When the stop button is clicked a second time the program stops. However, when "run" again, the program seems to just execute the REMAINDER VIs in the sequence structure which was aborted by the previous "stop", and then the program automatically stops. Running it a second time works fine, till another "stop" phase.
    Anyway will try to figure this out myself for now. Thanks for all the tips xseadog!

  • Error Code 1073807343 After Multiple Runs

    Hi all,
    I'm hoping someone here might be able to spot why I'm getting some strange behavior in a fairly simple spot of code I'm trying to get running. The idea for now is to just to step up the voltage output of a RIGOL DP821A over time, and when I first start up the computer and RIGOL, it works beautifuly. However, after a few runs of the program, and the exact number tends to change, I suddenly start to get the above mentioned error with possible reason, "VISA:  (Hex 0xBFFF0011) Insufficient location information or the device or resource is not present in the system." If it didn't work several times before breaking, I might think it was a connection issue, but that doesn't seem to be the case. I kind of need to get this working before I can get to other parts of the program, so if anyone has any experience with this problem, or even just some suggestions, I would greatly appreciate hearing them. The attached file is just a screenshot of the program.
    Thanks,
    -Matt

    Your Read makes no sense with the number of bytes to read wired to the number of bytes that were written. There is not a correlation. You just set the number of bytes to read to some arbitrarily high number. Please use the error in/out connections and get rid of that silly sequence structure.
    While there isn't a driver for your particular model, I would suggest you look at the drivers for other Rigol supplies.q

  • TH4800 Initialize.vi error

    I got this error when I ran this VI attached.
    TH4800 Initialze.vi
    err driver
    status: (Hex 0xBFFF0011)
    Insufficient location information or the requested device or resource is not present in the system.
    Is that because I left instrument handle out blank? What shall I put there if I just want to test this VI.
    Thank you.
    Attachments:
    TH4800 Initialize.llb ‏69 KB

    Hi,
    You are passing the resourse name of GPIB::7:INSTR instead of GPIB::7::INSTR
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Probleme de deploiement du chassis compactrio 9012

    Bonjour,
    j'ai un probleme de deploiement du chassis de mon compactRio. Lorsque je veux lancer une acquisition d'une voie simple, il m'affiche l'erreur hex 0x80DF001E le plugin de cet element est introuvable Verifiez que logiciel approprié est installé.
    Je pense que la cible rt ne demarre pas car il manque une fonctionnalité mais je ne sais pas laquelle.
    ci joint le message d'erreur.
    Merci d'avance
    Pièces jointes :
    yas.png ‏233 KB

    Bonjour,
    Merci d'avoir posté sur le forum NI.
    En effet vous avez surement dû oublier d’installer  NI-RIO sur le cRIO. Pour ce faire, reportez vous
    sur la page 6 pdf qui se trouve sur le lien suivant.
    Getting Started with CompactRIO and LabVIEW
    Cordialement
    Samuel G. | Application Engineer Team Leader
    Certified LabVIEW Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Été de LabVIEW 2014
    12 présentations en ligne, du 30 juin au 18 juillet

  • Conception maitre esclave ou autre ?

    Révélation (Surlignez pour lire)
    Bonjour à tous,
    Dans mon programme Labview, j'ai actuellement une "structure événements" dans une boucle while qui permet de piloter des platines de déplacement motorisées. Par exemple, pour un appui sur le bouton déplacement, la platine se déplace de 5 mm.
    J'aimerais avec cette structure événements lancer d'autres boucles whiles après un appui sur des boutons de l'interface. Par exemple, j'appui sur le bouton Acquisition et la boucle while correspondante démarre. Si j'appui sur un autre bouton, c'est une autre boucle while qui démarre etc.
    Que me proposez vous comme structure de programme ? j'ai regardé les conceptions Maitre/Esclave et Producteur/Consommateur mais je ne comprends pas bien comment elles fonctionnent...
    Si ces structures sont des solutions, pouvez me dire où trouver des exemples et/ou des explications sur leur fonctionnement.
    Merci
    Cordialement,
    Jérémy
    Résolu !
    Accéder à la solution.

    Tu pourras faire ce que tu veux avec une architecture multiboucle (que ce soit maitre-esclave ou producteur-consommateur ne change pas grand chose), ce qui est important, c'est de bien définir comment doit fonctionner le soft :
    - comment les boucles démarre et s'arrête
    - bien définir des "responsabilités" pour chaque boucle (ex: pilotage d'un appareil, acquisition, enregistrement, analyse, etc..)
    - comment communiquent les boucles entre elles, envoi de commande, transfert de données
    Quelle version de LabVIEW tu as?
    A partir de 2011 ou 2012 il y a des exemples de projets qui sont de bonnes bases mais certains exigent quand même un bon niveau de pratique en LabVIEW.
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Un logiciel me demande d'Activer l'accès pour les périphériques d'aide.

    Un logiciel me demande d'activer l'acces pour les péripheriqies d'aide.
    Cette option n'existe plus.
    Que faire?
    Meme en autorisant l'application dans "confidentialité".
    One program ask me to activate access for help peripherique
    this option is disapeared.
    What ca i do?

    Bonjour,
    Merci d'avoir posté votre question sur le forum de National Instruments.
    Je vous invite à vous rendre sur les liens suivant pour avoir les informations que vous cherchez, sur le choix des modules et des cRIO.
    cRIO 9073:http://sine.ni.com/nips/cds/view/p/lang/fr/nid/205621
    cRIO 9074:http://sine.ni.com/nips/cds/view/p/lang/fr/nid/203964
    NI 9425: http://sine.ni.com/nips/cds/view/p/lang/fr/nid/208815
    NI 9205: http://sine.ni.com/nips/cds/view/p/lang/fr/nid/208800
    NI 9217:http://sine.ni.com/nips/cds/view/p/lang/fr/nid/208804
    Les modules d'E/S vous permette de controler vos charges mais aussi d'acquérire des données (voir les liens ci-dessus).
    Le choix des cRIO se fait suivant l'utilisation qu'on cherche et des modules que l'on prend.
    Le cRIO se pilote en FPGA et/ou RT (Temp réel). Donc le logiciel LabVIEW incluant LabVIEW FPGA et/ou RT est indispensable. Seulement vue le niveau d'étude que vous avez; les connaissances en FPGA sont limitées (Ce qui est normale en BTS).
    Comme le disais Helmut O'Brian il y a d'autre alternative pour le pilotage de vos appareils mais cette solution ne sera pas conforme au fonctionnement de la plateforme de recherche.
    Il serai donc interressant pour vous, de faire l'étude de toute les caractéristiques de cette plateforme de recherche (avec les informations que je vous est données).
    Bon courage pour votre projet.
    Brice S.
    National Instruments France

Maybe you are looking for