Pin Barcode

I have a blackberry curve 9300 and I am new to the whole blackberry world. So I was wondering how do I scan a bar code that doesn't have to do with a contact. I mean with bar codes on posters or flyers can anyone tell me how to do this. Because I am very confused over this whole pin bar code thing so if some one can explain this to me I would be very happy.
Thank you
Solved!
Go to Solution.

try the search function... "QR code"
I just did and the first there results were just what you need. Here's one: http://appworld.blackberry.com/webstore/content/17292
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Scan a Pin barcode

my blackberry curve is 8520
when i click the scan a pin barcode in BBM the camera hangs up. what should i do so that it whould be fix again?
Solved!
Go to Solution.

Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Now, try the scan again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Desktop Update Will not install

Hello everyone.
I received a notification that I needed to update the Desktop software to v5.0.1 2010-03-25 and so downloaded the 250MB file. When I clicked on install, after a few seconds I received the message "There was an error installing updates. Click here to see the updates that have not been installed".
This download process has happened a couple of times. I have tried and tried to run the installation, but keep getting the same message.
I then checked the version of my BB Desktop software and found that it was 5.0.1.18 [Aug 21 2009]. The update notification is therefore for a newer version, or so it seems.
Can anyone help with reasons why it wont install, or give me some pointers how to get round whatever is preventing the installation. I don't want to have to keep downloading 250 mb files every night if I can help it.
Many thanks for your time.
Anthony
OS Version: 6.00 Bundle 2554 (v6.0.0.576, Platform 6.6.0.216)
Applications:
Battery Booster Pro v 1.2
BBC iPlayer
Blackberry Travel v 1.1.45.99
BuddyGuard Pro v 2.2.0.1
DB Rainavigator v 7.60.15
Documents To Go v 2.0005.105
Documents To Go Files v 2.0005.105
DriveSafe.ly Pro Complimentary v.2.100
Facebook v 2.0.0.50
Google Maps v 4.5.3
GPSLogger II v.2.3.1.2
Lloyds TSB Mobile Banking v.1.3
My PIN Barcode for BBM v2.1
One Touch Flashlight v 2.77
PDF To GO v. 2.0005.105
Poynt v.1.8.3
QR Code Scanner Pro Free v1.915
Qype v.3.1.54
Roboform for Blackberry v 1.2.6
Slide2Open Free v.1.500
Trainline TIckets v 1.1.33
Train Times v 1.9.8
Tube Map v 1.21.1
Twitter v2.0.0.16
Up2Date Free v1.110
Worldmate v.4.0.71.52
Your Orange v 1.0.66
YouTube v 1.0.0.40

Greetings, and welcome to the BlackBerry.com Support Forums.
First, I would suggest that you reboot your PC from off, and try the installation again.
Let us know...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I am sorry but your question is not completely clear. What Apple product are you having problems with?
If English is not your primary language, try posting in your native language.
Best of luck.

Printing barcode in HP laser jet through smartform

Hi folks,
can i print barcode in HP laser jet P3005 PCL6 by using smartform???
plz advice.
regards
smita

Yes, you can.. I guess, HP laser jet P3005 series PCL6 can print bar codes.
I am attaching the list of BARCODE supported printers
List of device types in SAP Releases 4.6x/6.xx/NW04/NW04s
OSS NOTE : 8928
Installation of new device types ********************
Many device types are appended as a zip-attachment to this note.
README.TXT contains information about these device types and codepages.
README_UPLOAD.TXT contains information on how to import the device
types.
PRINTER DRIVERS AND DEVICE TYPES:
In R/3, a distinction is made between "printer driver" and "device type". The device type consists of all the attributes defined for an output device. For correct access, these must be made known in the R/3 system. They cover aspects such as control commands for font selection, page size, character set selection, character set used and so on. One of these attributes is the printer driver to be used by SAPscript (R/3 forms processor) for this particular printer.
If your printer is not specified in the list below, ask the manufacturer if the printer is compatible with one of the defined printers or if it can be used with another emulation (for example, Postscript).
If the printer is not compatible or cannot be operated using an emulation, you must create a new device type (if the printer is not compatible). To print from SAPscript, you must choose one of the existing printer drivers.
At present, there are five SAPscript printer drivers. They include:
for HP-PCL5 (for example, HP Laserjet 3,4,5,6 series)
for PostScript printers (PS level 2)
for PRESCRIBE (for example, Kyocera FS-1500)
for device types SWIN/SAPWIN/xxSWIN/xxSAPWIN
for all other models.
The last driver is known as the "standard driver". It cannot provide absolutely precise positioning on the paper and does not support proportional fonts. Printer drivers are relevant for forms output with SAPscript. For the output of ABAP lists special printer drivers are only used as of Release 4.5A. They are anchored in the C kernel and are developed and maintained exclusively by SAP.
In the spool environment, device types refer not only to printers but also other output devices, for example, fax machines. Device types support specific printers or printer models. Device type definitions are stored completely in tables and can be individually adapted, modified or enhanced. If SAP performs such an adjustment for a customer, it constitutes a consulting service, and is generally charged seperately. On the other hand, the list of device types, above all in conjunction with SAP's hardware partners, is continually expanded.
COMPATIBLE PRINTERS:
Some printer models have been so successful on the market that many OEM products, clones and compatibles are also listed. You can often use compatible printers with R/3 by entering the printer definition of the original. Since complete compatibility is extremely rare, SAP can offer no assurances regarding the usability of compatible printers. This also applies to follow-up models made by the original producer.
LIST OF PRINTERS:
This is the list of device types supplied by SAP in different Releases. Most of these device types use "Western European" or "North American" character sets. Some device types in newer Releases however, also support other character sets and language areas such as Russian or Czech.
The device types named in this list are supported in the standard R/3 System as of the release mentioned.
If an OCR-A font (prerequisite for check printing) or an OCR-B font is supported in the R/3 device types, this is indicated. However, this generally requires additional font cassettes or firmware for the printer involved, since few printers have an OCR-A font "built in." For additional information about this, contact the printer manufacturer.
Check related notes attached for addition information on printer supportin R/3.
Related notes:
Note 135894 contains information on printing labels on special label printers.
Note 05196 contains information on printing bar codes with SAPscript
Note 94233 contains information on printing MICR font with SAPscript
Note 62178 contains information on device types for the Japanese version of the R/3 System.
Note 77891 contains information on device types for IBM-SCS printers on the IBM AS/400 hardware platform.
Note 98477 informs you on device types for printers by the manufacturer PSi.
Note 107938 contains information on device types for printers by the producer Tally.
Note 141719 contains information on device types for printers from the producer Printronix.
Note 141914 contains information on device types for printers from the producer Lexmark.
Note 153879 contains information on compatible printer models of producer EPSON.
Note 154494 contains information on compatible printer models of producer Genicom.
Note 199166 contains information on device types for printers from the producer Hewlett Packard.
Note 214187 contains information on device types for printers from the producer Océ.
Note 398236 contains information on device types for printers from the producer Sharp.
Note 408189 contains information on device types for printers from the producer Konica Minolta.
Note 436609 contains information on device types for printers from the producer Xerox.
Note 458047 contains information on device types for printers from the producer Ricoh.
Note 485240 contains information on device types for printers from the producer SAVIN.
Note 485244 contains information on device types for printers from the producer NRG.
Note 516687 contains information on device types for printers from the producer Lanier.
Note 516669 contains information on device types for printers from the producer Gestetner.
Note 878109 contains information on device types for printers from the producer Danka.
ASCIIPRI
Generic device type for line printers that can be used in urgent cases where no customized printer definition exists for a line printer. It contains no printer-specific control commands, but merely CARRIAGE RETURN, NEWLINE and FORMFEED commands. It uses the standard 7 bit ASCII character set (USASCII).
COMPU960
Device type for BULL line printers COMPUPRINT 4/66, as well as COMPUPRINT 960. Character set used: IBM 2 German.
DECLA75P
Device type for the DEC line printer DEC LA75 Plus.
DECLN07
Device type for the DEC laser printers LN07 and DECLaser 1100.
HP256X
Device type for all Hewlett-Packard line printers in the HP256... series. Based on the HP manual describing the HP256X series, OCR-A is included in this printer definition, but the printer needs an additional firmware/font cassette.
HP2930
Device type for Hewlett-Packard's HP2930 line printer.
HPDJ500
Device type for Hewlett-Packard's DeskJet 500 ink jet printer.
HPLJIIID
Device type for Hewlett-Packard's LaserJet IIIP, III, IIID and IIIsi printers, as well as the HP LaserJet 4 series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
HPLJSTND
Generic device type for printers that have an HP LaserJet emulation but cannot be operated via the definitions HPLJ4, HPLJIIID or HPLJ_II.
HPLJ_II
Device type for the Hewlett-Packard LaserJet II laser printer series. OCR-A and OCR-B are included in the printer definition, but the printer needs an additional firmware/font cassette. The "HP LaserJet barcodes & More Font Cartridge" is needed for this. Barcode printing from R/3 is not supported.
KYOF1000
Device type for the Kyocera F-1000 laser printer. OCR fonts are not supported. Bar code printing is supported.
KYOF1200
Device type for the Kyocera laser printers F-1200 and F-1200S. OCR fonts are not supported. Barcode printing is supported.
MT600
Device type for the Mannesmann-Tally line printer MT600. Character set used: US-ASCII (that is no German umlauts).
MT600GER
Device type for the Mannesmann-Tally line printer MT600. Character set used: German. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
MT600NDA
Device type for the Mannesmann-Tally line printer MT600. Character set used: Norwegian / Danish. OCR-A and OCR-B (German standard) are included in the printer definition; the printer must be upgraded with these fonts.
OKI341
Device type for the OKI Microline 3410 line printer.
POSTSCPT
Device type which is used for pure PostScript printers. Barcode printing from R/3 is not supported.
S4440XTG
Device type for the SEL Alcatel line printer 4440XT. Character set used: German.
SAPWIN
Generic device type for printers linked (or also fax devices) to PCs running under MS Windows 3.1, Windows 95 or Windows NT by means of the R/3 program SAPLPD. Windows printer drivers are used and the character set is ISO 8859-1. Barcode printing from R/3 is possible with the additional installation of a third-party DLL (see Note 25344), but is not supported in the standard system. OCR-A and OCR-B fonts are possible with an appropriate TrueType font (see also Note 48803).
Important Note:
As of Release 3.0E, you can use SAPWIN to:
Print proportional fonts and lines/boxes in SAPscript
Print black and white as well as color TIFF graphics (with the 32-bit SAPlpd on Windows 95 and Windows NT only).
See Note 39031.
SWIN
Generic device type for printing/faxing using MS Windows with SAPlpd. It is available as of Release 3.1H. Device type SWIN differs from SAPWIN in the layout of X_... formats for ABAP/4 list printing. The font size and line spacing were adjusted, particularly for color list printing.
In addition, SAPWIN contains an expanded list of SAPscript printer fonts for current releases, for example, Greek and Russian.
SNI4009
Device type for the Siemens-Nixdorf SNI 4009 line printer.
SNI4010
Device type for the Siemens-Nixdorf SNI 4010 line printer. OCR-A is included in the printer definition, but the printer needs an additional firmware/font cassette.
SNI9014
Device type for the Siemens-Nixdorf SNI 9014/12 line printer. OCR-A and OCR-B are included in the printer definition. The 9014/12 has OCR-A and OCR-B font installed as a default.
SNIZD13
Device type for the Siemens-Nixdorf SNI ZD13 line printer. OCR-A is included in the printer definition. The ZD13 has OCR-A font installed as a default.
CIP1000
Device type for C.ITOH line printers CI-1000 and CI-500. The IBM Proprinter II/XL emulation and IBM character set 2 (multilingual) are used.
EPESCP
Device type for all 24 or 48 element EPSON printers that use the control language ESC/P. Character set IBM 437 is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP2
Device type for EPSON printers that use the control language ESC/P2. The character set IBM 850 (multilingual) is used. OCR-A/OCR-B are included in the printer definition. However, some printers also require an additional firmware/font cassette.
EPESCP9
Device type for all 9-pin dot matrix EPSON printers that use the control language ESC/P. The standard ASCII character set is used with some additional international characters.
EPLQ550
Device type for the EPSON LQ-55 dot matrix printer. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HP2300
Device type for the Hewlett-Packard 2300 line printer series. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette.
HPLJ4
Device type for all printers in Hewlett-Packard's LaserJet 4 series (this includes LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4si). OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware/font cassette. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 4 Series printers requires SIMM module "JetCAPS Intelligent Barcode SIMM" and is supported.
IBM239X
Device type for the IBM 238X/239X Plus line printer series from Lexmark. This includes the types IBM 2380 Plus, IBM 2381 Plus, IBM 2390 Plus, IBM 2391 Plus. The IBM emulation and character set IBM 850 are used.
IBM4226
Device type for the IBM 4226 line printers from Lexmark. The IBM emulation and the character set IBM 850 are used.
IBM4232
Device type for the IBM 4232-302 line printer from IBM. The 4202 emulation and the character set IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBM6408
Device type for the IBM 6408-A00 line printer from IBM. The PropPrinter III XL emulation and the character set IBM 850/IBM 2 are used. OCR-A/OCR-B are included and supported. Barcode printing is not supported.
IBMAFP
Device type for IBM's external SAP2AFP converter. The R/3 spool output is converted to AFPDS format and passed to IBM AFP software. IBMAFP can only be used in conjunction with spool-exit (access method Z when defining the device type). Selection of printers directly connected to R/3 is not possible. IBMAFP must be used for 240 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP is for use on R/3 UNIX and Windows NT platforms.
IBMEFP is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMAFP3
Device type for IBM's external SAP2AFP converter that converts the R/3 spool output to an AFPDS format and sends it to IBM AFP software.IBMAFP3 can be used only in conjunction with spool-exit (access method Z when defining the device type). Selection of printers connected via R/3 is not possible. IBMAFP3 must be used for 300 pel AFP printers.
Character set is ISO 8859-1 (Latin 1). OCR-A and OCR-B are supported, as well as barcodes.
IBMAFP3 is for use on UNIX and Windows NT platforms.
IBMEFP3 is the proper device type for AS/400 R/3 Platforms and uses the EBCDIC character set.
IBMSCS
Device Type IBMSCS supports the "basic IBMSNA Character String" data stream for printers that are connected under IBM OS/400. IBMSCS is only supported for the use under SAP R/3 on hardware platforms IBM AS/400.
LX4039
Device type for the Lexmark laser printer series 4039. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/typeface cassette. "HP LASERJET barcodes & MORE FONT CARTRIDGE" is required. Barcode printing from R/3 is not supported.
KYOFS150
Device type for the Kyocera laser printer FS-1500, FS-3500, FS-1550+. OCR fonts are not supported. Barcode printing is supported.
NECP30
Device type for the NEC matrix printers P20/P30. The character set used is IBM codepage 850 (multilingual).
NECP72
Device type for the NEC matrix printers P62/P72. The NEC Pinwriter level 2 emulation and the character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. However, the printer requires an additional firmware/font cassette.
NECPW
Device type for the NEC 48-pin Pinwriter P5XL, P9XL, P6/P7, P6plus/P7plus, P2200, P2plus, P60/P70, P90, P20/P30, P22Q/P32Q, P42/P52, P62/P72. The character set IBM codepage 850 (multilingual) is used.
SNI4011
Device type for the 24-pin version of the SNI 4011 dot matrix printer. The EPSON LQ-850+ emulation and character set IBM codepage 850 (multilingual) are used. OCR-A/OCR-B are included in the printer definition. The printer has these fonts built in.
SNI20XX8
Device type for the Siemens-Nixdorf 2050-8, 2075-8 and 2090-8 laser printers (HP-LaserJet emulation). For operation with R/3, you need to obtain a special font diskette for the printer from SNI. This contains the fonts required, including OCR-A and OCR-B. Barcode printing from R/3 is not supported.
MT2033
Device type for the Mannesmann-Tally T2033 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
MT2045
Device type for the Mannesmann-Tally T2045 matrix printer. Uses MTPL+IBM Proprinter emulation and IBM codepage II for the character set. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
DEVICE TYPES NEW TO RELEASE 3.1G:
HPDJ660
Device type for the color inkjet printer Hewlett-Packard DeskJet 660C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPDJ850
Device type for the color inkjet printer Hewlett-Packard DeskJet 850C. Lists are printed in color. OCR-A, OCR-B and barcode printing from R/3 are not supported.
HPLJ5SI
Device type for Hewlett-Packard's LaserJet 5Si. OCR-A/OCR-B are included in the printer definition. However, the printer needs an additional firmware. The "HP LASERJET barcodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with HP LaserJet 5Si requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
MT6045
Device type for the Mannesmam-Tally T6045 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definition. These fonts are built into the printer at the factory.
Important note: For use with R/3 the printer's standard character set must be set to Latin-1.
NEW DEVICE TYPES IN RELEASE 3.1H:
MT691
Device type for the Mannesmann-Tally T691 dot matrix printer. Uses MT660 emulation and character set Latin-1. OCR-A/OCR-B are included in the printer definitions. These fonts are built into the printer at the factory.
NEW DEVICE TYPES IN RELEASE 3.1I:
SAPWIN5
Device type for printing cyrillic characters (character set ISO 8859-5, for example Russian) with SAPlpd/Microsoft Windows. This device type works exclusively with the Russian Windows 95 or NT 4.0 (not with Windows 3.1). To use it, a 32 bit version of the SAPlpd with a number 4.00 or higher is required.
DEVICE TYPES IN RELEASE 4.0A:
HPLJ5
Device type for all printers of the Hewlett-Packard LaserJet 5 printer series (LaserJet 5/5m, 5P/5MP, 5C) except for HP LaserJet 5 SI. OCR-A/OCR-B are included in the printer definitions. However, the printer needs an additional firmware/font cassettes. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a SIMM module is required. Barcode printing from R/3 with printers of the HP LaserJet 5 series requires and supports SIMM module "JetCAPS Intelligent Barcode SIMM".
Important note: HPLJ5 uses new 4.0A features (scalable fonts under PCL-5) and can only be used in Release 4.0A and higher releases!
I2HP4
Device type for Eastern Europe for all printer of the Hewlett Packard LaserJet 4 printer series (for example, LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). Uses character set "ISO 8859/2" (Latin 2). OCR-A/OCR-B are included in the printer definitions, however, the printer requires additional firmware/font diskette. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a respective SIMM module is required. For the barcode print from R/3 with printer of the HP LaserJet 4 series the SIMM module "JetCAPS Intelligent Barcode SIMM" is required and supported.
I2SWIN
Device type for Eastern Europe for printing under Microsoft Windows via a 32 bit SAPlpd. I2SWIN uses the character set ISO 8859/2 (Latin 2). To use I2SWIN, the following preconditions are required:
SAPlpd 32 bit version, from 4.00
Microsoft Windows NT 4.0 or eastern European Win95 (Latin 2 version)
R/3 Release 3.0E or higher
Important note: Microsoft Windows 3.1 (SAPlpd 16 bit) is NOT supported!
I7SWIN
Device type for Greece for printing under Microsoft Windows via SAPlpd 32 bit. I7SWIN uses character set "ISO 8859/7" (Greek). Requirements for operation of I7SWIN are:
SAPlpd 32 bit as of Version 4.00
MS Windows NT 4.0 or Greek Windows 95
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
NEW DEVICE TYPES IN RELEASE 4.5A:
HPLJ4000
Device type for the Hewlett Packard LaserJet 4000 printer and
related models such as LaserJet 5000, 8000, 8100 and 8150.
HPLJ4000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ4000 offers improved output of ABAP print lists by using a special PCL-5-printer drivers and can therefore only be used in Releases as of 4.5A.
I9HP4
Device type for Turkey for all printers of the Hewlett-Packard LaserJet 4 printer series (among others LaserJet 4/4m, 4Plus/4mPlus, 4V/4mV, 4Si). I9HP4 uses character set "ISO 8859/9" (Latin 5). OCR-A/ OCR-B are contained in the device type, however, the printer needs extra firmware or an extra font cartridge. The "HP LASERJET BarCodes & MORE FONT CARTRIDGE" or a corresponding SIMM module is needed for this. The SIMM module "JetCAPS Intelligent Barcode SIMM" is a requirement for printing barcodes from R/3 with printers of the HP LaserJet 4 series and is supported.
KYOFS170
Device type for the Kyocera laser printer FS-1700. OCR fonts are not supported. Barcode printing is supported.
Device type KYOFS170 offers improved output of ABAP print lists by using a special PRESCRIBE-II-printer driver and can therefore only be used in Releases as of 4.5A.
POST2
New device type for PostScript-level-2-printer which can be used alternatively to POSTSCPT. Barcode printing and OCR printing from R/3 is not supported.
Device type POST2 offers an improved output of ABAP print lists by using a special PostScript-L2-printer driver and can therefore only be used in Releases as of 4.5A.
NEW DEVICE TYPES IN RELEASE 4.6A:
IXLINK
Device type for the external XLink/SAP translator of Xerox, which translates R/3 SAPGOF data to Xerox format and transfers data to the Xerox production printer. IXLINK can only be used if the XLink/SAP translator is being used. You cannot access printers, which are connected via R/3!
OCR-A and OCR-B fonts as well as bar codes are supported.
NEW DEVICE TYPES IN RELEASE 4.6C:
HPLJ8000
Device type for Hewlett Packard LaserJet 8000, 8000N, 8000DN printers. HPLJ8000 uses character set "ISO 8859/1" (Latin 1). For the barcode print from R/3 with HP LaserJet 4000, the DIMM module "JetCAPS Intelligent Barcode DIMM" is required and supported. In addition to the barcodes this DIMM module contains the OCR-A and OCR-B fonts that are supported by HPLJ4000.
Device type HPLJ8000 offers improved output of ABAP print lists by using a special PCL-5-printer driver and can therefore only be used in Releases as of 4.5A.
HPLJ1100
Device type for Hewlett Packard LaserJet 1100 printer. HPLJ1100 uses character set "ISO 8859/1" (Latin 1). OCR-A/B as well as barcode print from R/3 are not supported.
Device type HPLJ1100 can only be used in Releases as of 4.6C.
I9SWIN
Device type for Turkey und printing with MS Windows via SAPlpd 32 bit. I9SWIN uses character set "ISO 8859/9" (Latin 5). Preconditions for using I9SWIN:
SAPlpd 32 bit as of version 4.00
MS Windows NT 4.0 or Turkish Windows 95 (Latin 5 Version)
R/3 Release 3.0E or newer
Important note: MS Windows 3.1 (SAPlpd 16 bit) is not supported!
IBMNP
Device type for laser printer IBM InfoPrint 20 as well as the IBM Network Printer 12, 17, 24, IBM InfoPrint 32, InfoPrint 40. OCR- and MICR fonts are supported by the device type. The printer needs an additional module for these fonts. "Barcode-, MICR and OCR A+B SIMM for IBM Network Printers" is required. Read Note 133660 also. Bar code printing from R/3 is not supported.
Important note: IBMNP uses new 4.0A features (scaleable font under PCL-5) and can only be used in maintenance level 4.0A and higher.
NEW DEVICE TYPES IN RELEASE 6.10:
IBMIP12
Device type for laser printer IBM InfoPrint 12. IBMIP12 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP21
Device type for laser printer IBM InfoPrint 21. IBMIP21 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP32
Device type for laser printers IBM InfoPrint 32 and InfoPrint 40. IBMIP32 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP2K
Device type for production laser printer IBM InfoPrint 2000 with PCL-5 emulation. IBMIP2K uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP60
Device type for laser printer IBM InfoPrint 60. IBMIP60 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBMIP70
Device type for laser printer IBM InfoPrint 70. IBMIP70 uses character set ISO 8859-1 (Latin 1). Bar code and OCR-font printing from SAP is not supported. This device type is compatible with all SAP releases from 4.0A.
IBM4247
Device type for line printer IBM 4247. The printer's 4247 emulation and character set IBM2 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
NEW DEVICE TYPES IN RELEASE 6.20:
IBM6400
Device type for line printer IBM 6400. The printer's "P-Series" emulation and character set PC850 is used. OCR-fonts are supported. Bar code printing from SAP is not supported.
Attention: Please follow note 396462 when installing the printer.
HP1200
Device type for HP LaserJet 1200/1220. HP1200 uses character set "ISO 8859/1" (Latin 1).
HP1200 is compatible with all releases from 4.0A.
HP2200
Device type for HP LaserJet 2200. HP2200 uses character set "ISO 8859/1" (Latin 1).
HP2200 is compatible with all releases from 4.0A.
HP2250
Device type for HP Business Inkjet 2250. HP2250 uses character set "ISO 8859/1" (Latin 1).
HP2250 is compatible with all releases from 4.5B.
Attention: Business Inkjet 2200 is not compatible with HP2250.
HP2500
Device type for HP DeskJet 2500C with PCL-5 option. HP2500 uses character set "ISO 8859/1" (Latin 1).
HP2500 is compatible with all releases from 4.0A.
HP3200
Device type for HP LaserJet 3200m. HP3200 uses character set "ISO 8859/1" (Latin 1).
HP3200 is compatible with all releases from 4.0A.
HP4100
Device type for HP LaserJet 4100. HP4100 uses character set "ISO 8859/1" (Latin 1).
HP4100 is compatible with all releases from 4.0A.
HP4550
Device type for HP LaserJet 4550 (color laser). HP4550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP8150
Device type for HP LaserJet 8150. HP8150 uses character set "ISO 8859/1" (Latin 1).
HP8150 is compatible with all releases from 4.0A.
HP8550
Device type for HP LaserJet 8550 (color laser). HP8550 uses character set "ISO 8859/1" (Latin 1).
HP4550 is compatible with all releases from 4.5A.
HP9000
Device type for HP LaserJet 9000. HP9000 uses character set "ISO 8859/1" (Latin 1).
HP9000 is compatible with all releases from 4.0A.
NEW DEVICE TYPES IN RELEASE NW04:
BRHL
Device type for Brother laser printer HL-2460. This device type is compatible to other Brother laser printers, see below.
OCR-A and OCR-B fonts as well as bar codes are supported.
BRHL is compatible with all releases from 4.5A.
IP2085
Device type for the IBM Infoprint 2085 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2085 is compatible with all releases 4.5A and higher.
IP2085P
Device type for the IBM Infoprint 2085 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2085P is compatible with all releases 4.5A and higher.
IP2105
Device type for the IBM Infoprint 2105 Laser printer with printer language PCL-5. OCR font and bar code printing from SAP are not supported.
IP2105 is compatible with all releases 4.5A and higher.
IP2105P
Device type for the IBM Infoprint 2105 Laser printer with printer language PostScript. OCR font and bar code printing from SAP are not supported.
IP2105P is compatible with all releases 4.5A and higher.
LEXT622
Device type for the Lexmark T622 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXT622 is compatible with all releases 4.5A and higher.
LEXW820
Device type for the Lexmark W820 laser printer. OCR-fonts and bar code printing from SAP are supported if the printer is equipped with a corresponding option (note 119471).
LEXW820 is compatible with all releases 4.5A and higher.
LEX4227P
Device type for the Lexmark 4227plus line printer. The device type supports the Latin-1 character set. For using the device type, the IBM emulation must be set in the printer.
OCR fonts and barcode printing from SAP are not supported.
LEX4227P is compatible with all releases.
I5LEX
Device type for Cyrillic printing (e.g. Russian) with Lexmark T522 laser printer. Lexmark T522 natively supports Cyrillic fonts and character set ISO 8859-5.
OCR-fonts are not supported. Bar code printing is supported (with a bar code DIMM, see note 119471).
I5LEX is compatible with all releases 4.0A and higher.
CNLX522
Device type for Lexmark T522 laser printer with add-on "Simplified Chinese DBCS font DIMM kit" (Lexmark product number 09H0690). The device type supports Simplified Chinese. OCR-fonts and bar code printing from SAP are not supported.
CNLX522 is compatible with all releases 4.0A and higher.
JPLX522
Device type for Lexmark T522 laser printer with add-on "Japanese DBCS font DIMM kit" (Lexmark product number 13K0227). The device type supports Japanese character set. OCR-fonts and bar code printing from SAP are not supported.
JPLX522 is compatible with all releases 4.0A and higher.
KPLX522
Device type for Lexmark T522 laser printer with add-on "Korean DBCS font DIMM kit" (Lexmark product number 10G1705). The device type supports Korean character set. OCR-fonts and printing of bar codes from SAP are not supported.
KPLX522 is compatible with all releases 4.0A and higher.
TWLX522
Device type for Lexmark T522 laser printer with add-on "Traditional Chinese DBCS font DIMM kit" (Lexmark product number 09H0691). The device type supports traditional Chinese character set. OCR-fonts and bar code printing from SAP are not supported.
TWLX522 is compatible with all releases 4.0A and higher.
HP5000
Device type for HP LaserJet 5000. HP5000 uses character set "ISO 8859/1" (Latin 1).
HP5000 is compatible with all releases from 4.0A.
HP23
Device type for HP LaserJet 2300. HP23 uses character set "ISO 8859/1" (Latin 1).
HP23 is compatible with all releases from 4.5A.
HP3000
Device type for HP business inkjet 3000. HP3000 uses character set "ISO 8859/1" (Latin 1).
HP3000 is compatible with all releases from 4.5A.
HP4300
Device type for HP LaserJet 4200 and HP LaserJet 4300. HP4300 uses character set "ISO 8859/1" (Latin 1).
HP4300 is compatible with all releases from 4.5A.
HP4600
Device type for HP color LaserJet 4600. HP4600 uses character set "ISO 8859/1" (Latin 1).
HP4600 is compatible with all releases from 4.5A.
HP5100
Device type for HP LaserJet 5100. HP5100 uses character set "ISO 8859/1" (Latin 1).
HP5100 is compatible with all releases from 4.5A.
HP5500
Device type for HP color LaserJet 5500. HP5500 uses character set "ISO 8859/1" (Latin 1).
HP5500 is compatible with all releases from 4.5A.
HP9500
Device type for HP color LaserJet 9500. HP9500 uses character set "ISO 8859/1" (Latin 1).
HP9500 is compatible with all releases from 4.5A.
I2HPPS
Device type for certain HP LaserJet models with PostScript emulation (see Note 575916). I2HPPS supports character set "ISO 8859/2" (Latin 2).
I2HPPS is compatible with all releases as of 4.0A.
Barcode printing and OCR fonts are not supported.
CAN105
Device type for Canon laser printer imageRUNNER 105. CAN105 supports character set ISO 8859-1 (Latin 1).
CAN105 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN22
Device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CAN22 supports character set ISO 8859-1 (Latin 1).
CAN22 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN5
Device type for Canon laser printers imageRUNNER 5000/5000i/6000. CAN5 supports character set ISO 8859-1 (Latin 1).
CAN5 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CAN85
Device type for Canon laser printers imageRUNNER 8500/7200/85. CAN85 supports character set ISO 8859-1 (Latin 1).
CAN85 is compatible with all releases as of 4.5A.
OCR-fonts are supported, barcode printing is not supported.
CN105PS
PostScript device type for Canon laser printer imageRUNNER 105. CN105PS supports character set ISO 8859-1 (Latin 1).
CN105PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN22PS
PostScript device type for Canon laser printers imageRUNNER 2200/2800/3300/3300i. CN22PS supports character set ISO 8859-1 (Latin 1).
CN22PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN5PS
PostScript device type for Canon laser printer imageRUNNER 5000/5000i/6000. CN5PS supports character set ISO 8859-1 (Latin 1).
CN5PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CN85PS
PostScript device type for Canon laser printer imageRUNNER 8500/7200/85. CN85PS supports character set ISO 8859-1 (Latin 1).
CN85PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CAN400
PCL5 device type for Canon laser printer imageRUNNER 330/400. CAN400 supports character set ISO 8859-1 (Latin 1).
CAN400 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN400PS
PostScript device type for Canon laser printer imageRUNNER 330/400. CN400PS supports character set ISO 8859-1 (Latin 1).
CN400PS is compatible with all releases as of 4.5A.
OCR-fonts and barcode printing is not supported.
CANC32
PCL5 device type for Canon color laser printer Color imageRUNNER C3200. CANC32 supports character set ISO 8859-1 (Latin 1).
CANC32 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
NEW DEVICE TYPES IN RELEASE SAP NetWeaver 04s:
ARM205
PCL-5 device type for Sharp laser printer AR-M205. ARM205 uses character set ISO 8859-1 (Latin-1).
ARM205 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM276
PCL-5 device type for Sharp laser printer AR-M276. ARM276 uses character set ISO 8859-1 (Latin-1).
ARM276 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM450
PCL-5 device type for Sharp laser printer AR-M450. ARM450 uses character set ISO 8859-1 (Latin-1).
ARM450 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARM550
PCL-5 device type for Sharp laser printer AR-M550U. ARM550 uses character set ISO 8859-1 (Latin-1).
ARM550 is compatible with all releases as of 4.5A.
OCR fonts are not supported. Barcode printing and OCR fonts are supported with an add-on product (note 733347).
ARC262P
PostScript device type for Sharp color laser printer ARC-262M. ARC262P is compatible with all releases as of 4.5A.
OCR fonts are not supported.
CAN2220
PCL5 device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CAN2220 supports character set ISO 8859-1 (Latin 1).
CAN2220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN2220P
PostScript device type for Canon laser printer imageRUNNER 2220n/2220i/3320n/3320i. CN2220P supports character set ISO 8859-1 (Latin 1).
CN2220P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CAN5020
PCL5 device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CAN5020 supports character set ISO 8859-1 (Latin 1).
CAN5020 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CN5020P
PostScript device type for Canon laser printer imageRUNNER 5020n/5020i/6020n/6020i. CN5020P supports character set ISO 8859-1 (Latin 1).
CN5020P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3100
PCL5 device type for Canon color laser printer imageRUNNER C3100. CNC3100 supports character set ISO 8859-1 (Latin 1).
CNC3100 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC31PS
PostScript device type for Canon color laser printer imageRUNNER C3100. CNC31PS supports character set ISO 8859-1 (Latin 1).
CNC31PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC3220
PCL5 device type for Canon color laser printers imageRUNNER C3220/C2620. CNC3220 supports character set ISO 8859-1 (Latin 1).
CNC3220 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC322P
PostScript device type for Canon color laser printers imageRUNNER C3220/C2620. CNC322P supports character set ISO 8859-1 (Latin 1).
CNC322P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC6800
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800. CNC6800 supports character set ISO 8859-1 (Latin 1).
CNC6800 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is not supported.
CNC68PS
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800. CNC68PS supports character set ISO 8859-1 (Latin 1).
CNC68PS is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31E
PCL5 device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31E supports character set ISO 8859-1 (Latin 1).
CNC31E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC31EP
PostScript device type for Canon color laser printer imageRUNNER C3100 with imagePASS-E1 controller. CNC31EP supports character set ISO 8859-1 (Latin 1).
CNC31EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322E
PCL5 device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322E supports character set ISO 8859-1 (Latin 1).
CNC322E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC322EP
PostScript device type for Canon color laser printer imageRUNNER C3220/C2620 with imagePASS-C1 V.2 controller. CNC322EP supports character set ISO 8859-1 (Latin 1).
CNC322EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68E
PCL5 device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68E supports character set ISO 8859-1 (Latin 1).
CNC68E is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CNC68EP
PostScript device type for Canon color laser printers imageRUNNER C5800/C6800 with imagePASS-D1 controller. CNC68EP supports character set ISO 8859-1 (Latin 1).
CNC68EP is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
CN2270
PCL5 device type for Canon laser printers imageRUNNER 2270/2870/3570/4570. CN2270 supports character set ISO 8859-1 (Latin 1).
CN2270 is compatible with all releases as of 4.5A.
OCR-fonts are supported. Barcode printing is supported with usage of the optional barcode printing kit.
CN2270P
PostScript device type for Canon laser printer imageRUNNER 2270/2870/3570/4570. CN2270P supports character set ISO 8859-1 (Latin 1).
CN2270P is compatible with all releases as of 4.5A.
OCR-fonts and Barcode printing are not supported.
DL3100
PCL5 device type for DELL color laser printer 3100cn. DL3100 supports character set ISO 8859-1 (Latin 1).
DL3100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL3100P
PostScript device type for DELL color laser printer 3100cn. DL3100P supports character set ISO 8859-1 (Latin 1).
DL3100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100
PCL5 device type for DELL color laser printer 5100cn. DL5100 supports character set ISO 8859-1 (Latin 1).
DL5100 is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
DL5100P
PostScript device type for DELL color laser printer 5100cn. DL5100P supports character set ISO 8859-1 (Latin 1).
DL5100P is compatible with all releases as of 4.5A.
OCR-fonts and Barcodes are not supported.
HP3700
Device type for HP color LaserJet 3700. HP3700 supports character set ISO 8859-1 (Latin 1).
HP3700 is compatible with all releases as of 4.5A.
HPBI23
Device type for HP business inkjet 2300. HPBI23 supports character set ISO 8859-1 (Latin 1).
HPBI23 is compatible with all releases as of 4.0A.
HP9055
Device type for HP LaserJet 9055mfp. HP9055 supports character set ISO 8859-1 (Latin 1).
HP9055 is compatible with all releases as of 4.5A.
HP9065
Device type for HP LaserJet 9065mfp. HP9065 supports character set ISO 8859-1 (Latin 1).
HP9065 is compatible with all releases as of 4.5A.
I7HP4
Device type for HP LaserJet printers with "Greek Font DIMM" (add-on module with Greek fonts). Information can be found under www.hp.com/go/sap/drivers. I7HP4 supports character setISO 8859/7 (Greek).
I7HP4 is compatible with all releases as of 4.6B.
HP4250
Device type for HP LaserJet 4250 printer. HP4250 supports character set ISO 8859-1 (Latin 1).
HP4250 is compatible with all releases as of 4.5A.
HP1160
Device type for HP LaserJet 1160 printer. HP1160 supports character set ISO 8859-1 (Latin 1).
HP1160 is compatible with all releases as of 4.5A.
HP1320
Device type for HP LaserJet 1320 printer. HP1320 supports character set ISO 8859-1 (Latin 1).
HP1320 is compatible with all releases as of 4.5A.
HP2430
Device type for HP LaserJet 2430 printer. HP2430 supports character set ISO 8859-1 (Latin 1).
HP2430 is compatible with all releases as of 4.5A.
HP3030
Device type for HP LaserJet 3030 printer. HP3030 supports character set ISO 8859-1 (Latin 1).
HP3030 is compatible with all releases as of 4.5A.
HP4650
Device type for HP Color LaserJet 4650 printer. HP4650 supports character set ISO 8859-1 (Latin 1).
HP4650 is compatible with all releases as of 4.5A.
HP5550
Device type for HP Color LaserJet 5550 printer. HP5550 supports character set ISO 8859-1 (Latin 1).
HP5550 is compatible with all releases as of 4.5A.
HP9850
Device type for HP 9850mfp. HP9850 supports character set ISO 8859-1 (Latin 1).
HP9850 is compatible with all releases as of 4.5A.
HPLJ9050
Device type for HP LaserJet 9050 printer. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5A.
HPOJ9130
Device type for HP officejet 9130. HPOJ9130 supports character set ISO 8859-1 (Latin 1).
HPOJ9130 is compatible with all releases as of 4.0B.
HP4345
Device type for HP LaserJet 4345mfp. HP4345 supports character set ISO 8859-1 (Latin 1).
HP4345 is compatible with all releases as of 4.5B.
HP9040
Device type for HP LaserJet 9040mfp. HP9040 supports character set ISO 8859-1 (Latin 1).
HP9040 is compatible with all releases as of 4.5B.
HP9050
Device type for HP LaserJet 9050mfp. HP9050 supports character set ISO 8859-1 (Latin 1).
HP9050 is compatible with all releases as of 4.5B.
HP9500M
Device type for HP LaserJet 9500mfp. HP9500M supports character set ISO 8859-1 (Latin 1).
HP9500M is compatible with all releases as of 4.5B.
IP2060
Device type for the IBM Infoprint 2060ES Laser printer with printer language PCL-5. IP2060 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2060 is compatible with all releases 4.5A and higher.
IP2060P
Device type for the IBM Infoprint 2060ES Laser printer with printer language PostScript. IP2060P supports character set ISO 8859-1 (Latin 1).OCR font and bar code printing from SAP are not supported.
IP2060P is compatible with all releases 4.5A and higher.
IP2075
Device type for the IBM Infoprint 2075ES Laser printer with printer language PCL-5. IP2075 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075 is compatible with all releases 4.5A and higher.
IP2075P
Device type for the IBM Infoprint 2075ES Laser printer with printer language PostScript. IP2075P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2075P is compatible with all releases 4.5A and higher.
IP2090
Device type for the IBM Infoprint 2090ES Laser printer with printer language PCL-5. IP2090 supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090 is compatible with all releases 4.5A and higher.
IP2090P
Device type for the IBM Infoprint 2090ES Laser printer with printer language PostScript. IP2090P supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2090P is compatible with all releases 4.5A and higher.
IP2105E
Device type for the IBM Infoprint 2105ES Laser printer with printer language PCL-5. IP2105E supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105E is compatible with all releases 4.5A and higher.
IP2105EP
Device type for the IBM Infoprint 2105ES Laser printer with printer language PostScript. IP2105EP supports character set ISO 8859-1 (Latin 1). OCR font and bar code printing from SAP are not supported.
IP2105EP is compatible with all releases 4.5A and higher.
OKI6100
Device type for OKI laser printer B6100. OKI6100 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6100 is compatible with all releases as of 4.5A.
OKI8300
Device type for OKI laser printer B8300. OKI8300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are not supported. Barcode printing is supported with an OKI add-on product.
OKI8300 is compatible with all releases as of 4.5A.
OKI9500
Device type for OKI color laser printer C9500. OKI9500 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI9500 is compatible with all releases as of 4.5A.
OKI4350
Device type for OKI laser printer B4350. OKI4350 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI4350 is compatible with all releases as of 4.5A.
OKI5400
Device type for OKI color laser printer C5400. OKI5400 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI5400 is compatible with all releases as of 4.5A.
OKI6300
Device type for OKI laser printer B6300. OKI6300 supports character set ISO 8859-1 (Latin 1). OCR-fonts are supported. Barcode printing is supported with an OKI add-on product.
OKI6300 is compatible with all releases as of 4.5A.
SML1451, SML1451

Is it possible to read Barcode using Blackberry Application?

Dear Friends,
Is it possible to read Barcode using Blackbbery application? If yes please let me know what thing we'll be require to develop the same. It is very urgent please help me.
Regards,
Haidar Ali

Yes, it is. There are already a number of barcode reader applications for BlackBerry, such as one named "Edocrab". Google it.
You'll need some experience in Java development. Please see the Developer section of this forum.
And here:
http://na.blackberry.com/eng/developers/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Barcode printing in dotmatrix

Hi,
I have been successful in printing barcode labels onto a laser printer. Also the laser printer has a codepage defined which can understand horizontal tab. The barcode is created by defining the code in se73 and then using it in smartstyles and finally passing in smartforms.
Offlate, I have been instructed to print barcode labels in dotmatrix (24 pin) printers, which I am not able to do so. I guess the code page that it uses may not be able to identify the string as barcode itself.
I hit upon another idea, to convert the smartform output to pdf based on the laser printer, and then print the pdf on the dotmatrix printer. Though it worked, the barcode doesn't get displayed in sharpl contrast, and hence doesn't get scanned by the scanner.
Any input on this please. Basic request is to print the PDF417 barcode onto a form with DOTMATRIX printer only.
Thanks,
Tom Jerry.

I think it is not possible to print barcode using dot matrix printer (not readable by scanner). Why not invest in Laser printer? the cost is quite cheap nowadays. However, I come across an article that might be useful to you, something to do with the printer settings:
http://www.taltech.com/TALtech_web/support/bckb/matrix.htm

TS1292 The seriel or card pin is not recognized. I also have a seriel beginning wit 63

I have entered the PIN and it was not recognized. Seriel number is coming back as invalid. The card was given to me for purchasing an iPod nano on black Friday. I was able to scan the barcodes with a bar code scanner.
<Personal Information Edited by Host>

How to Redeem a Code > http://support.apple.com/kb/ht1574
If necessary...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of Issue.

Barcode - How to output an underscore when scanning

Hi,
I am currently working with a Zebra Label that outputs some text, variables and a barcode.
We are using code39 for the barcode.
How do you output an underscore when scanning the barcode?
Does code39 support outputting an underscore? If not, what barcode style does support it?
Thanks,
John

The CLK of the FPGA is 200MHz and the Sampling frequency of the ADC is 50 MHz, so I set the FFT IPCore CLK to 50 MHz.
This is a little confusing. So is your FFT's clock pin actually running at 200 or 50? The FFT has 2 parameters: Target clock frequency and target data throughput. It sounds like you should be setting the former to 200MHz and the latter to 50MHz.
I'm guessing your output buffer is overflowing because the FFT is outputting new rames way faster than you'd read them through UART. Thus your address is rolling over a bunch of times between uart reads and the data is getting totally corrupted. You should probably drop down chipscope to see for sure, thought.
Another thing you could try is use a SR register on your buffer write enable to only capture the first output frame from the FFT.

BBM Barcode scanner . doesn't work anymore !

BBM barcode scanner doesn't work anymore , and i've downloaded a barcode scanner
like QR Scanner Pro and Barcode scanner from app world and it doesn't work either,
it was working fine month ago, i have no idea what happened to it
Please Help i really need it for some groups i wanna join

Have you tried contacting the developer of the app, perhaps? Since it's an app, the developer is responsible for support, aren't they?
Beyond that, the next step would be to ensure that your BB OS is indeed compatible with the app. If so, then further steps could be to seek out an updated BB OS (one that, of course, remains compatible with your apps) as well as performing a clean reload of your BB OS and all of your apps...just in case something has become corrupted in the BB OS itself.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Barcode C128 is not getting displayed in Sapscript

HI,
I need to print the barcode in the Sapscript.
The barcode is not getting displayed even in the preview also, when I give the Barcode C128.
But when I give other Barcodes, it is getting displayed in the preview.
Can anyone let me know the solution to print the barcode for C128, as others are not that much fit to print.
Thanks
Rakesh

Hi Dieter,
No. I haven't.
Is this the reason for that?
let me know the procedure.
thanks
Rakesh

Apple DVI to Video adapter + Mini DVI to DVI adapter pins not same

I just purchased an Apple DVI to Video adaptor so I could plug in a Mac mini to an older tv, however the pin arrangement on the Apple DVI to Video adapter is not the same as the pin arrangement on the Mini DVI to DVI adapter that came with the Mac mini.
Anyone have any idea what adapter I can use to make this connection?

Joseph Kriz wrote:
James,
I'm confused here.
Which Mini do you have?
I know you posted this in the 2009 Mac Mini section so your Mini should have 2 video out ports.
1. Mini DVI
2. Mini DisplayPort
If that is true, then there is no way you could have connected the DVI to Video adapter in your first post as the new Mini does not have a DVI port.
The new Mini's come with 1 adapter.
Mini DVI to DVI adapter.
I don't know of any Apple adapters that will output to S Video, component or composite connections on the new Mini's.
The one that osxdude shows above will not work on a new Mini. It say nothing about a Mini in their description:
*The Mini-DVI to Video adapter is designed for the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4, allowing you to connect to most S-video or Composite enabled devices.*
Good Luck and let us know what you find.
Yes, I have a late 2009 Mac mini. It came with the mini DVI to DVI adapter as you stated. I need to hook up to an older tv with yellow component video port. Not knowing any better, and looking online, it looked like the male DVI end of the “Apple DVI to video” adapter would connect to the female DVI end of the “Mini DVI to DVI” adapter that came with the Mac mini. I figured that since they were both DVI plugs, male and female, they would connect, but the “Apple DVI to video” adapter has 4 extra pins, so they won’t.
Then, following osxdude’s lead, I went to a local independent Apple store, and they told me that the same adapter that osxdude suggested would work, so I bought that (at an inflated price), but as you stated, it does not work. Also, as you stated, the Apple site does not list the Mac mini as being used with this adapter, which is why I did not originally purchase it online. It was only at the insistence of the independent Apple store that it would work that I purchased it. Unfortunately, once the package is opened
the store were I purchased it will not take it back. Boy... this is getting expensive, and confusing! Why so many adapters?
After much searching I found this info: http://forums.macrumors.com/showthread.php?t=706736&highlight=monoprice so I’m going to try that.
Once it’s all said and done, I guess I’ll be listing a few adapters on ebay!

Barcode report is not working in linux

hi,
i am running the report using the barcode, which is running perfectly in the windows server - i meant in the report builder.
but when i try run the same report in linux server through application, i am getting the below mentioned error:
Terminated with error:
REP-1401: 'beforereport': Fatal PL/SQL error occurred. ORA-39565: Message 39565 not found; product=RDBMS; facility=ORA
below mentioned is the code written in beforereport trigger:
globals.barcode_to_use := BarCodeConstants.BAR_CODE_128;
globals.bcobj := barcodemaker.new();
i have include the jar file path /ora/u01/oracle/v101/ds1/reports/jlib/oraclebarcode.jar both in class path and report_path, but still its not working.
any one had solve this issue?...pls help me out
for you info:
CLASSPATH=/ora/u01/oracle/v101/ds1/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/ora/u01/oracle/v101/ds1/jlib/repository.jar:/ora/u01/oracle/v101/ds1/jlib/ldapjclnt10.jar:/ora/u01/oracle/v101/ds1/jlib/debugger.jar:/ora/u01/oracle/v101/ds1/jlib/ewt3.jar:/ora/u01/oracle/v101/ds1/jlib/share.jar:/ora/u01/oracle/v101/ds1/jlib/utj.jar:/ora/u01/oracle/v101/ds1/jlib/zrclient.jar:/ora/u01/oracle/v101/ds1/reports/jlib/rwrun.jar:/ora/u01/oracle/v101/ds1/forms/java/frmwebutil.jar:/ora/u01/oracle/v101/ds1/reports/jlib/oraclebarcode.jar
RW=$ORACLE_HOME/reports; export RW
REPORTS_PATH=$ORACLE_HOME/reports/templates:$ORACLE_HOME/reports/samples/demo:$ORACLE_HOME/reports/integ:$ORACLE_HOME/reports/printers:${REPORTS_PATH}; export REPORTS_PATH
REPORTS_TMP=/tmp; export REPORTS_TMP
REPORTS_NO_DUMMY_PRINTER=TRUE; export REPORTS_NO_DUMMY_PRINTER
REPORTS_TAGLIB_URI=/WEB-INF/lib/reports_tld.jar; export REPORTS_TAGLIB_URI
REPORTS_CLASSPATH=$ORACLE_HOME/reports/jlib/rwbuilder.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar:$ORACLE_HOME/j2ee/home/oc4j.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar:$ORACLE_HOME/reports/jlib/oraclebarcode.jar; export REPORTS_CLASSPATH
repserver.conf file setting:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xms512m -Xmx512m" classPath="/ora/u01/oracle/v101/ds1/reports/jlib/oraclebarcode.jar">
<property name="sourceDir" value="/ora/u02/oraadmin/config/as2/app_qits_run"/>
<property name="tempDir" value="/ora/u02/oraadmin/config/as2/app_qits_tmp"/>
</engine>
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000" classPath="/ora/u01/oracle/v101/ds1/reports/jlib/oraclebarcode.jar"/>
thanks
renjish

Hello,
The first step if to find the PL/SQL line causing the error in 'cf_1formula':
create a procedure Trace in your Reports : (modify the line trace_file := Text_IO.Fopen('d:\temp\rep_trace.txt', 'A'); to adapt the filename to your system)
PROCEDURE Trace (trace_string in varchar2) IS
trace_file Text_IO.File_Type;
BEGIN
trace_file := Text_IO.Fopen('d:\temp\rep_trace.txt', 'A');
Text_IO.Put_Line(trace_file, trace_string);
Text_IO.Fclose (trace_file);
END;
Then, add some calls to this procedure in the program unit 'cf_1formula'
trace('Before line 1';
<PL/SQL code of line 1>
trace('Before line 2';
<PL/SQL code of line 2>
trace('Before line 3';
<PL/SQL code of line 3>
Excecute the Reports and find in the file 'd:\temp\rep_trace.txt' the last line executed.
Regards

Error while Adding a Delivery Note with Barcode

When i add the deliverynote , i get the following error :
Error Code : -10 : Document can not be added: Base line item has been updated, re-transmitting the document data from the base document .
or
Access violation error
This happens only when i assign a barcode to the item in the Item Master Data ( Eg : ITM001 is assigned a barcode ) .This works fine when the barcode is not assigned to the item .
What is the cause of this error ?
Obj := IDocuments(Company.GetBusinessObject(oDeliveryNotes));
Obj.CardCode         := 'B1010';
Obj.Lines.Add;
Obj.Lines.BaseType   := bodt_Order;
Obj.Lines.BaseEntry := 100;
Obj.Lines.BaseLine   := 0;
obj.Lines.ItemCode := 'ITM001';
Edited by: senthil kumar on Dec 2, 2009 1:04 PM

Hello,
I had the same problem. This occurs. when you change the barcode between sales order and delivery note, and YOu are issuing the Delivery note by DI API.
To do:
- Open Sales Order
- OverWrite in the lines the barcode to the same as Material Master Data
- Update sales order
Issue delivery note.
SAP Note number: 1314220
Regards
János

With the last update, 10.0.1, I can no longer pin my Firefox shortcut to my taskbar. How can I do this....there is no longer any option to do so. TIA

This is what worked for me.
1. Open Windows Explorer
2. Proceed to where Firefox is stored
3. Drag the Firefox icon to your desktop (this will create a desktop shortcut)
4. Drag the Firefox shortcut to your task bar
5. Delete your Firefox desktop shortcut
You should now have a Firefox shortcut pinned to your task bar.

Hmmm, could be related to the following, but I haven't tested myself:
There is a bug in Firefox 21 with the Windows 7 Taskbar "Jump List" not being updated. (Long thread here: [https://support.mozilla.org/en-US/questions/959865 Why do visited sites not show in my jump list? (Win 7 Ultimate).])
Judging from the bug system, the fix for that issue will definitely appear in Firefox 24, and there is an effort to move it up to Firefox 22 (beta) and Firefox 23 (aurora).

Pin Barcode

Similar Messages

Maybe you are looking for