PIN-code ändern

wie kann ich mein iPhone 4 SIM PIN-Code änern

If you mean the security code (which protects your phone) rather than the PIN (which protects your SIM) then the default on all Nokia phones is 12345.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

  • HELP ME PLEASE MY MAC IS ASKING FOR A SYSTEM LOCK PIN CODE AND I NEVER SET ONE HELPHELP HELP

    ok so i tried enabling iCloud/Find my mac onto my macbook pro,and it restarted to finalise the process,but when it started back up its asked me for a system lock pin code,though i never set one???? please help omg im crying

    Here's my guide: How to: Unlock System Lock PIN Code

  • How many times can you enter the wrong pin code on an iphone before it resets?

    How many times can you enter the wrong pin code on an iphone before it resets itself?

    Hey Robin.T,
    Thanks for the question. The following article provides the answer to your question:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you enter the wrong passcode six or more times, you'll see a message that says one of the following:
    iPhone is disabled
    iPad is disabled
    iPod touch is disabled
    You can also set your passcode lock to wipe the device after 10 unsuccessful attempts (Settings > General > Passcode Lock > Erase Data)
    Thanks,
    Matt M.

  • HT201365 How can I get around the system lock pin code  if I dont know what it is? I have my username and passwork

    I have switched on my MAC after 2 months of no use and I am getting the grey screen asking for a system lock pin code, I dont know what it is, how can I get into my MAC?
    Many thanks
    Graham

    That sounds like it's requestion the Find My Mac passcode.  If you don't know it, you'll have to take it to a nearby Apple store with proof of purchase/ownership as only they can unlock it for you.

  • Enter Passcode is now a text box instead of a 4 digit PIN code...

    hi,
    recently, I somehow got into a state where my phone (first generation iphone running 3.0) got into a state where the passcode is a text edit box instead of a four digit PIN code. i tried entering my PIN, didn't work, tried entering every password I use -- still doesn't work. what is going on here? i would like to be able to use my phone again someday...
    anyone know what's going on?
    thanks.
    -phil

    Well the only route I can think of if it only happened due to error and not that you are using a phone connected to a company Exchange server is to restore it. Though believe it won't let you by normal means, you have to put it in recovery mode and then restore it as new.

  • The phone does not lock up when entering PIN code

    This morning my Z1 Compact wanted me to enter the PIN code: I did so but the only thing that happened was that the text "Enter PIN code" disappeared. But I was still at the same page. It seems to have stuck or freezed. Tried to remove and reset the SIM card, called the operator who says there´s nothing wrong with the SIM card. tried to force restart with and without the SIM card. I can't get pass that starting page.
    The funny thing is that on the "mssage board" or whatever it is called at the top of the phone is updating when I got a message, mail, updates etc. But I can not scroll down and see them in detail. 

    You may want to consider running a software repair
    Fully switch off your phone and make sure it is disconnected from your Pc then start PC Compannion and select Support zone then Update my phone/tablet then in Blue select Repair my phone /tablet and follow the onscreen instructions and when prompted making sure your phone is still switched off hold Volume down and connect your USB cable which should enter your phone into flashmode and start the repair process
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code). Works fine from the Iphone as such. When I connect my Iphone in Bluetooth to my car, only the phone

    I have programmed my Iphone to automatically connect to confcalls (dialing the nbr, pausing, dialing the PIN code).
    Works fine from the Iphone as such.
    When I connect my Iphone in Bluetooth to the voice-driven system in my car (Mercedes C), only the phone number appears to be transmitted. Entering a conference call number via the Iphone while driving is not a good idea.
    How can I fix this ?

    That *****.  I sell electronics on ebay.  Before listing them, i have to test and clean them. I have worked with microsoft Zune, you could sync via wireless through the network to your host computer. 
    i was hoping Apple would add that feature or the ability to connect to my computer via WiFi or Bluetooth and sync it wirelessly...   It would be sweet to have the bluetooth and wireless opened up so you can do more than just  connect to headphones or a headset... 
    I upgraded to the iPhone 4 this past december, i am on replacement # 2 or my 3rd iPhone 4...  I was hoping for some upgrades in quality.  Also being left handed, it seemed to drop many calls and give me very poor reception.  i added a Griffin Elan Form Graphie case that covers all but the front, top button, bottom speakers and volume control buttons and the call and reception quality has improved.  But I sure would have loved to see some improvements in the quality and function of the phone...
    Thanks for your input, i really appreciate your replies... 

  • PIN Code Problem on E51

    Hello guys...
    I want to change my pin code of my phone..
    Currently I'm using Nokia E51.
    I change the PIN Code Request to "Yes" and it asked the PIN code. And so where can i get that pin code? My phone is new one and I already try "12345" and "01234" but it didn't work. So, that means it already wrong 2 times. I was told that i can only wrong 3 times. is it right?
    If so, can u guys guide me or help me or any advice about where is that PIN Code????
    if i want to clear the timer of the call duration,etc. I just input "12345". Its ok and its work too. No other code...
    (But now I change my Lock Code from "12345" to something mix with letter and number) But in the PIN Code Request, i can only enter number. So i think PIN code Request code is not this lock code.
    So, can anyone guide me on this?
    Thanks

    The PIN code refers to your SIM card, not to E51
    Your service provider must have given you a PIN code and a PUK code for the SIM card. If you fail to enter the correct PIN code three times, the SIM card is blocked and you must unblock it using the PUK code.

  • PIN Code Need Help on E51 SOS/F1 Help..!

    Hello guys...
    I want to change my pin code of my phone..
    Currently I'm using Nokia E51.
    I change the PIN Code Request to "Yes" and it asked the PIN code. And so where can i get that pin code? My phone is new one and I already try "12345" and "01234" but it didn't work. So, that means it already wrong 2 times. I was told that i can only wrong 3 times. is it right?
    If so, can u guys guide me or help me or any advice about where is that PIN Code????
    if i want to clear the timer of the call duration,etc. I just input "12345". Its ok and its work too. No other code...
    (But now I change my Lock Code from "12345" to something mix with letter and number) But in the PIN Code Request, i can only enter number. So i think PIN code Request code is not this lock code.
    So, can anyone guide me on this?
    Thanks

    The default pin code is set by your network so phone them and ask what it is.

  • Unlock pin code for macbook air

    i have some problem with my macbook air someone try to type the password wrong for more time and i have message the system is locked enter the pin code to unlocked your Mac
    and I’m in Egypt and no apple store here I’m sharm el shiekh , can i send you the serial number to send me the pin code ,

    I have now unlocked firmware passcode.
    First ever!
    I CAN MAKE SOME CASH NOW!!!!

  • Unlock Pin code

    Hi,
    Was testing out the find myac and it set the (Enter your system lock PIN code to unlock this Mac) now I can't unlock it. Any one have any ideas how I can unlock it.

    Here's my guide: How to: Unlock System Lock PIN Code

  • HT204053 enter your system lock pin code.what o do?

    please help

    If you are not the ownership of this Apple device, you should drop off this device at any Apple store or any police station. Do Not trying to unlock this device by retrive a system lock pin code.

  • Enter your system lock pin code to unlock this mac

    I just traded my Macbook Pro for a 27" Core i5 iMac. I wiped the iMac when I traded and I brought it home to do a full reinstall. I booted holding the Option key down and noticed this iMac had a recovery partition I opted to use the recovery partition to reinstall. To my surprise it was Lion. And the cd was snow leapord.  I was cool with that and signed in and used the computer all day. Then sometime while I was sleeping a obnixious alarm went off on the iMac and there was a box to enter your system lock pin code to unlock this mac.
    Priding myself on doing all repairs on my own since my primary job is reinstalled and virus removal. Long story short I could not access anything no matter what I tried. I ended up calling apple care and asking what needed to be done they explained I needed to bring it to a apple authorized store and they would have to unlock the firmware.
    Do you guys know what they are talking about or is there anything I can do before driving 100 miles to my nearest apple store. I find this rediculous.

    I did indeed did wipe the system clean at the owners house, I went home with what I thought was totally clean hard drive, there was a recovery partition I did not see until I got home. This recovery partition was indeed tied to the original owner which I did not know at the time. I assumed it was like any old windows recovery and it was clean and made reinstalls a dream. Well long story short I had the snow leapord cd in the drive and ready to go until I seen this recovery partition and I opted to use  the **** recovery and I reinstalled registered and signed into everything and used the computer all day 12 hours probably. By the way the recovery partition that was tied to this guy was lion.  
    So then I left the computer on and went to sleep. Late last night an alarm went off and that is when I saw the enter the pin to unlock this mac. I have tried holding the C when I boot up, I have tried holding the Option key when booting up. I have tried resetting the pram. Nothing can be done. I can get to another lock screen by phsically unplugging the power cord then booting up holding the option key. That will bring me to a screen with nothing but a lock and a line that I can type some kind of admin password. Nothing I have with work. I tried, root, admin, administrator, my password I used when I set lion up. Nothing!!!!!.
    At this point this machine is more or less 100% useless, the only option I can see is to bring it to a authorized apple retailer and have them fix it. I did bring it to a local apple store. And they said they could probably fix it, but I would have to pay them between 50-100 dollars. The repair guy said something about getting the info from the ram. I just laughed and left.
    Anyway this is like a BIOS lock, you cannot get to terminal, cd, to any boot options, you cannot reset anything at all. It's a full lock.

  • Why my apple ID appears while entering my pin code?

    why does my apple ID appears while i'm entering my password (just at the top of the pin code box), besides, the digits i'm typing does appear too, which i think is very insecure if somebody is standing next to me...

    "Pin code box" - are you referring to entering your password for App Store or iTunes purchases?  if so, this is normal. Do you really have people looking over your shoulder when making purchases. They would also have to watch your fingers to see what password you're typing as it is NOT mirrord.

  • Pin code not accepted in new IOS 7.0.2

    Today I was asked to update my iPad to the new iOS - which I duly did. Then it asked me to put in a pin code for security. THis was OK and I put it in twice as requested - now what I thought was the code is not accepted and the Ipad is disabled.
    Help!!!

    The given information on the link is not working.
    I have never synched my iPad mini to a computer, and since I updated it to 7.0.2 a few weeks ago , it suddenly lost my passcode that I had provided.
    After having tried to unlock my ipad a few times, it got disabled and now even when I try to restore, iTunes throws the following error.
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    HELP PLEASE.

Maybe you are looking for

  • Size of Acrobat 9.0 program folder... RTP files?

    I have Acrobat Standard 9.5.2 installed on my Windows XP machine, which is a laptop with a 40GB hard drive. I am getting a bit low on drive space, so I would like to delete any unneccessary files or move them to an external drive. My C:\Program Files

  • Management Console with Multi App Servers (BPC 7 SP06)

    Hello everyone, I recently upgraded to BPC 7 SP06 from 5.1 and was wondering how Management Console suppose to really work... We have multiple Application Servers running behind load balancer, so when I login to http://<loadbalancer>/ManagementConsol

  • Drill Down Report in HRABAP

    Hi All, I have requirement to use drill down report in HRABAP. I know in normal report we will use HIDE and AT LINE SELECTION case SY-LSIND when 1 we wll get the data. I dont know how to use this in HRABAP. I am using<b> provide and end provide </b>

  • SOAP senario

    Hi Experts, My scenario is SAP R/3 is triggering an FM and receiver is SOAP adapeter(Sync interface) and my target url is http://xxx and scenario is working fine and my new requirement is to change target url from  http to https  in this case what I

  • How do I do this to a Graphic?

    I was looking to purchase a vacuum the other day and came across this picture: Picture of Miele Capricorn Scroll Down to: Ergonomic Deluxe Hose Handle I would love to integrate this on to my own website, but I have no idea how this effect was achieve