Pin location problem for XC7Z100FFG900

Zynq device can be divided into two parts- PS (has ARM) and PL (similar to FPGA).
MIO pins are dedicated to PS and can't be used with PL logic. You must use the other IO pins for your case.
I would recommend you to go through chapter 2 of UG585 for more understanding.

Hello ,
Open the synthesized design and select I/O planning to view Package Pins. Here you can use GUI drop down options under ports to LOC.
Save your design and the changes will reflect in XDC constraint file.
Check if it helps.
--Syed

Similar Messages

HT4060 Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug.

Hi, I have bought iPad air, and got apple 12w USB Power Adapter with pin flat plug. It is a problem for me. I live in Switzerland and the electric outlet is suitable only for round pin plug. I do appreciate for your support.

Plug adapter
http://img.diytrade.com/cdimg/975531/17878192/0/1293436146/Universal_socket_to_S witzerland_Plug_adapter.jpg

When i download anything it disappears from the download location as its downloading gets completed? it's a serious problem for me as i am unable to find it anywhere

When i download anything it disappears from the download location as its downloading gets completed? it's a serious problem for me as I am unable to find it anywhere

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
* http://kb.mozillazine.org/Unable_to_save_or_download_files

SB Audigy 2 ZS Gamer, Pin locati

Hey, I've been interested for some time in setting up the headphone/microphone in the front of my case. The only thing that is stopping me from doing so is the fact that I can't seem to locate which pin is which on the Sound Blaster Audigy 2 ZS/Gamer. I was hoping that someone could clue me in with an image of the board + the pin locations or a link to a credible source. Thank you for your time.

I have absolutely same problem.
I use Audigy 2 Platinum.
Operation System:
Win XP Pro 32bit
Driver:
Creative Sound Blaster Audigy series Driver v.2.8.000
Applications:
Creative MediaSource Player-Organizer v.3.30.2
Creative MediaSource Plugin for Remote Control v.2.30.02
I use 5. configurations of speakers.
When, I use remote controller to adjust volume.
Front left and right channels working correctly.
Center, Low Frequency and Back Left channels apply max high volume level and don t apply any other volume levels.
Back Right channel apply max low volume level and don t apply any others volume levels.

TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above "
iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
"....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
Products Affected
iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
This article has been archived and is no longer updated by Apple.
Symptoms
After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
Resolution
The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
Important: You must be logged in as an Administrator.
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named NetworkInterfaces.plist.
Drag this file to the Trash.
Restart the computer.
Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
To refresh your network settings, from the Location pop-up menu, choose New Location.
Type a name for your location and click OK.
Click the Apply Now at the bottom right to accept the changes.
If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

Location problem with my iPad

Hello everyone!
I own an iPad 16GB WiFi. I have a problem with location system in all my apps from iPad since a few days. Any of my apps can get my location. All of them shows a message about location error.
I'm using WiFi connection at home and never had this problem before.
Some things that have changed in the last days:
- I replaced my home gateway. I had a Comtrend HG536+. Now I'm using a Cisco Linksys WAG320N.
- I changed WiFi security from WPA to WPA2.
- I updated my iPad to iOS 4.3.4 version.
All my devices connect correctly to the WiFi network, even my iPad. Why suddenly location doesn't work on my iPad?
Thanks,

andresmas wrote:
Thanks for your answer!
I test it with the WiFi connection at work and location works perfectly. So I suppose it's about what you said. I have just two more question about this:
- Can I do something for getting my new router to get registered or just wait?
- Is it a problem for location that my WiFi connection uses WPA2 security or it doesn't matter?
Thanks.
It has become a mystery as to how the router would become registered. It used to be that you could do this yourself online, but I think that self-registry is gone or Apple no longer uses that database.
The security method does not mater.

OpenJPA - ArgumentException: Could not locate metadata for the class usi...

I'm getting the following exception when executing logic/queries around JPA entity classes:
{color:#333399}nested exception is: <1.0.0 fatal user error> org.apache.openjpa.persistence.ArgumentException: Could not locate metadata for the class using alias "MyClass". This could mean that the OpenJPA enhancer or load-time weaver was not run on the type whose alias is "MyClass". Registered alias mappings: "{MyClass=null}"{color}
I get this exception on occassion. It is intermitent and i can't seem to reproduce it consistently.
I'm using the following:
WebLogic: 10
KODO: 4.1.3.1 bundled with WL10 which in turn uses OpenJPA 1.0.0
In other forums on the net they have suggested explicitly adding the classes to the persistence.xml file ( i've done this )
They have also stated to run the openjpa enhancer on the code before deployment to WL ( done this too!)
One last step that i have yet to attempt is to load the class within the code before use ( haven't tried this as it seems so hackish)
Any other thoughts? ANyone else experience this?
Thanks

We are having the same issue.. Anybody knows how to deal with this problem?

How do you turn on location services for the Photos app?

I reset my location services and I need to reactivate the location services for those apps I want to use this function. I have turned on location services for all other apps, including CAMERA, but I cannot figure out how to turn it back on for PHOTOS (Camera Roll). This option did appear when I did the new iPhone5 setup, but I cannot get it back. And PHOTOS is not listed in the apps shown under the Location Services setting page. I set my wife's phone up too and the PHOTOS app is showing on her phones Location Services setting page. Help please.

Hi There
I had the same problem and actually I found out that in Location Services you need to Turn On the option for CAMERA, as there is no photos icon.
Cheers
Iva

XSD Location Problem.

Hi Gurus,
After starting the node in a cluster environemnt, often receiving "Unable to load Translation schemas from for http://xmlns.oracle.com/BRM/schemas/BusinessOpcodes due to: XSD Location problem.
XSD Loading problem."
This is mainly observed in BRM schemas, has anyone exprienced this? what shall be the workaround/solution other than restarting the container/application?
We are using SOA 10.1.3.4 MLR 8 and Oracle AIA 2.4.
Please help.

The BRM schemas are present in the AIA Components which will be referred by the load balancer url in a clustered environment. However, if in any of the nodes, the url for AIA Components has the local node url instead of load balancer url, this issue occurs.
Identify the node which is giving the issue (shutting down one node at a time and retrying the operation which gives the error). In the node which has the issue, try doing a search on AIA components to find out if there is any reference using local node url instead of load balancer.
If you find any, replace with the load balancer url. I had faced a similar issue and I was able to resolve it as I have mentioned above.
Cheers,
- AR

Storm9530 Location problem??

Hi, i live in Canada and recently purchased a used and unlocked BB Storm 9530 off the internet from texas USA. I am using the phone Pre-paid for the time being and for some reason my calls I make are costing me a fortune. I live in a border-town with a US town right on the american side but since the phone is pre-paid it cant roam. Ive talked to my cell phone company about this and they said for some reason the phones is calling internationally and its not the service itself. The phone is manually selected for my home network and i just cant figure it out. is it because the phone is an american phone? is there any way of checking more into this because i cant even use my phone to call because $5.00 for a 15 second call is rediculous. please help!

sherrdrew wrote:
Does anyone know if Apple is ever going to fix the location problem. I live in IL and my Ipad thinks I'm in NC. I'm lucky though, searching the problem on the net I found most people who live in the US are having Ipad that think they live in Europe and Germany. At least mine is on the same side of the world.
What a totally ridiculous claim. Most iPad owners have no problems at all in this area. The fact that you are is invidual to you and your case and, absent any useful information at all in your two posts aside from "Hey, it ain't working ...", I guess we could guess that your problems are due to the fact that
a. You don't have a 3G model, and therefore you don't have GPS, or ..
b. You do, but it isn't working right, or ..
c. You do, and it's working right, but PEBKAM, or ..
d. You don't have a 3G model, and your iPad is unable to resolve the local WIFI data to generate a rough location, or ...
e. Same as d. above, but the local wifi datafields are simply incomplete or incorrect, or ...
f. Yadda yadda yadda ......

Save for web problem for transparent gaphics

hi!
savng any transparent graphic in " save for web&.." the transparancy of original file is shown much more opaque/darker and so it will save in png file.
iattached file where you can see red box with 40% opaciy , but when opened in save for web it looks more like 60% opacity.
i found solutions of some problems for color shifting in save for web , but none of them solves my problem.
Any ideas?

All is not as hopeless as it seems just a bit hidden in CS 3 and earlier in CS 4 the mystry was brought to the frnt though not really document as far as I know.
The problem is simple to correct and has a logical reason why it is manifesting itself this way.
In CS 3's Save for Device and Web there is a small triangle at the top left had corner on the image display window that offers you a choice between the default and the problem uncompressed color, Macintosh color, Windows color and Document Color Profile which is what you are looking for since that is what you expect to match.
There is also the option to convert to sRGB which what the web basically displays well. Which is located on the upper right corner of the dialog also a drop down.
I hope this helps you find your way it used to drive me a bit crazy myself till I took a really close look at the dialog.

The Critical Problems for Creating Standby Database

The Critical Problems for Creating Standby Database:(I want to create a physical standby database on the same system of the primary database)
1. Should I copy all the backup datafiles, standby controlfile and password file to a same directory before the first time to mount the standby database?
2. Before mounting the standby database, Should I change the datafile's name to a new one in the standby controlfile? How to change them?
3. When issuing the command to mount the standby database, should I specify the controlfile's name.(using which controlfile to mount)
These problems are not clearly secified in Oracle documentations.

Can you point us to the Windows specific documentation you refer to?
The parameter DB_FILE_NAME_CONVERT should take care of the new mapping for your datafiles (and LOG_FILE_NAME_CONVERT for logs), so you should be able to put them where you want and use the parameter to point Oracle to the correct location. You should not need to change the name in the controlfile.
Place your standby controlfiles where you have the control files defined in your parameter file and Oracle should recofgnise that it is a standby db. You should not need to specify which controlfiles to use (if this is even possible), your CONTROL_FILES init parameter points to them.
Not sure about the password file....my instances are on separate boxes and the password file has the same name on both primary and standby.

10g: Database Diagram "Unable to Locate Elements For ..."

Hello,
In experimenting with JDeveloper 10g Diagram feature (IDE version 9.0.5.13.88), I experienced a rather vexing problem. I wondered if anyone could shed some light onto the issue for me and perhaps even help get it corrected.
I started off by Upgrading/Converting an existing 9.0.3 project up to 9.0.5. I then created a new Database Diagram (File | New..., General -> Diagrams -> Database Diagram). I then dragged 1 unconstrained view and 2 constrained views onto the diagram. It automatically drew the view links. I arranged the views on the diagram and then closed JDeveloper. I then closed the diagram and the workspace. When I attempted to reopen the diagram, I received the following error:
Unable to Locate Elements for Adhoc Reporting Model
In the list were the 3 views and associated viewlinks. Pressing continue yielded a blank diagram, much to my chagrin.
Any ideas?
Thanks,
Sean

When you mention views, I presume that you mean View Objects, if this correct. I also presume that you dragged and dropped these View Objects from the navigator, and that the View Link that you mention was already visible in the navigator, is this also correct?
Did you see your view objects in the navigator, when you re-opened JDev? Are they in the same project, as your diagram? The diagrammer should have been able to find the objects, if they are visible in your current project.
You state that you first shutdown JDeveloper, and then closed your diagram, and workspace, did your diagram re-appear as expected when you opened up JDeveloper, and it was only after closing the diagram, and workspace, and then re-opening the workspace and diagram that you ran into problems?
Did you save everything, before you shutdown JDeveloper?
There is no known bug on this, so it would be good to get very specific test steps for this, to enable us to log a bug. Incidentally, why did you chose to create a Database diagram, rather than a Business Components Diagram?

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

I am having trouble with custom color settings. It randomly reverts back to North American General Purpose without warning. This is a big problem for me. My customers (professional photographers) expect consist colors in my printing. Help!

Do you even know how to nuke and re-set Photoshop's preferences, colorplak? Your last post seems to reveal that you don't understand what I'm talking about. Here's a link you can click on:
Preference file functions, names, locations | Photoshop CC
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Note: If this process doesn't work for you while you're using a wireless (bluetooth) keyboard, attach a wired keyboard and retry.
Important: If you re-create the preferences by deleting the Adobe Photoshop CC Settings file, make sure that you only delete that file. If you delete the entire settings folder, you also delete any unsaved actions or presets.
Reinstalling Photoshop does not remove the preferences file. Before reinstalling Photoshop, re-create your preferences.
Note for Photoshop 14.1 and later: If you use Generator and reset your Preferences, Generator is disabled. Choose Preferences > Plug-ins to turn it back on.
Video: Julieanne Kost created a video that takes you through two ways of resetting your Photoshop preferences. The manual preference file removal method is between 0:00 - 5:05. The keyboard shortcut method is between 5:05 - 8:18. The video is located here.
Mac OS
Important: Apple made the user library folder hidden by default with the release of Mac OS X 10.7. If you require access to files in the hidden library folder to perform Adobe-related troubleshooting, see How to access hidden user library files.

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Can't find my audio book -- Downloaded it from my public library to iTunes via Overdrive. It transferred to my old nano just fine but, even though it seemed to transfer to my new iPhone, I'm not able to locate it for playback.

Thank you. That solved the problem. So simple but it wasn't intuitive to me.

Pin location problem for XC7Z100FFG900

Similar Messages

Maybe you are looking for