Pin names and numbers do not print with black and white printer setup option

Multisim V12
Printer HP LaserJet 1320
File -> Print Options -> Print Sheet Setup, check In black/white, OK
Then
File -> Print Preview, shows all elements of the drawing in black white
Then select Print and the drawing prints without pin names and pin numbers.
The same procedure with the black/white unchecked previews in color and then prints all circuit elements

Hi HiZTrace,
I used Multisim 12 with the same configuration and printed with a HP LaserJet 4250, but it seemed to be working well for me. There could be some incompatibility issue with your printer driver. A workaround you can try is to install a PDF Converter and print the file in color, then print the generated PDF file in black and white. There are many PDF Converters available, for example, CutePDF Writer (free)
Sorry for the inconvenience.
Derek Z.
National Instruments

Similar Messages

What are pin names and numbers rotated?

I copied an existing schematic symbol into my user data base, changed the part number and saved it. Then I placed the component into the schematic and the pin names and numbers were totally screwed up. All vertical names and numbers were rotated horizontal.
See the attached picture. On the left is the image shown in the "Select a Component" dialog. On the right is what I get when I place the component.
WYSINWYG!
How do I correct this, and is this going to happen every time I place a component with vertical labels?
Phil
Solved!
Go to Solution.
Attachments:
screwed up symbol.jpg ‏235 KB

The original component a FT 232DM, but this is no longer manufactured. The FT232BL is a pin for pin replacement. All I wanted to do was change the component name.
I copied the FT232DM from the schematic sheet into my User Database. Then I opened the component in the Symbol Editor, changed the name to FT232BL, and saved it into my User Database. What you see in the image posted earlier are the symbol as it appears in the Symbol Editor (left) and as it appears after I placed the FT232BL into the schematic.
I have solved the problem - I can't wait days and days for a Tech Support answer on a job with a short deadline.
I edited the component in Symbol Editor and changed pin rotation from Auto to horizontal or vertical as appropriate. Then when the part was placed in the schematic the vertical pin names and numbers appeared as they should.
It is very peculiar that the program displays the symbol one way in the Symbol Editor and then places it in the schematic with a different configuration. The way the user designs the part in the Symbol Editor is the way the part should be placed in the schematic.
Phil

Error " Selected numbers does not agree with transferred"

Hi,
While in production support I got a issue saying
Error " Selected numbers does not agree with transferred"
How to solve this.
Regards
San Reddy

Hi,
This doesnt mean that its a failure.
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - Job log can also be helpful.
In your case its probably because of tRFC issue.
Check SM58 / BD87 for pending tRFCs.
Thanks,
JituK

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

Hp Officejet Pro 8500 will print but not anything with black ink. It keeps aligning itself.

My Hp Officejet Pro 8500 will print but not anything with black ink - i have checked the black ink cartridge and it is full. Whenever i print anything in colour (only option) the printer goes into an alignment/maintenace loop that lasts for a long time and does not fix the problem. What should I do?

Clean your printerhesd 4-5 times until the black fully restores. I am on my third complete cleaning and have gone from 0% black to approx. 60-70%. So, it works just takes time.

PIN number of Q10 does not match with the sticker (Q10 verizon)

Hi, i bought a blackberry q10 verizon from your company and found that the PIN in the About is not matching with the PIN at the back of the battery. Can you please advise why so? Have I bought a fake phone?
Thanks
Hai
Mod Edit: Edited post to remove personal information to comply with the Community Guidelines and Terms and Conditions of Use

Hi and Welcome to the Community!
First, this is a user-to-user community, not a user-to/from-BB channel for any formal communications. So, we can't tell you anything about your purchase result. Please contact the actual place of purchase for assistance with this matter...from what you describe, it could be as simple as a labeling error or as complex as a fake device...but, at an internet distance, we have no way to know. You need your official support channel, which is via your actual original place of purchase.
Good luck!

Gradient banding is not smooth, with more halo white and dark black with poor tone

Hello
gradient banding is not smooth, with more halo white and dark black with poor gray tone

Hello, long shot, but...
Go to System Preferences > Universal Access and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.
Universal Access> may be Accessibility in 10.8.x

Ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

ibooks author, how do I get the standard book pages background into my document. I have published one book so far which does not display with a book pages background or options for font size.

No on the book title, no problem there.
The issue is: my book pages appear as on white paper, no background that resembles a open book and also no option to change fonts. The book was created in iBooks author, there was a problem going with the "Publish" menu route so I was instructed my Apple to "export" the file and submit that. I think that's the problem after reading that iBooks author is a hybrid epub file.
Thanks for getting back to me.

Suddanly Mbp display has got inverted colors with black on white settings. in universal access. When I connect external display(tv), TV display is normal. I reinstalled os x lion. But it did not help.

Suddanly Mbp display has got inverted colors with black on white settings. in universal access. When I connect external display(tv), TV display is normal. I reinstalled os x lion. But it did not help. I had this problem before but it solved after reinstalling os x lion.
Did you have this problem? What should I do?

Sorry, its not an external display. I changed out THE display in my imac. When I hooked up my wife's display it was photo negative and the imac was color. I changed the Universal Settings and the external display went to color and the imac went to photo negative.

Phone numbers are not registered with iMessage

Hey all.
I've installed Mavericks a few days ago .
I've synced my contacts with iCloud to my macbook air and noticed that I can send iMessage to email adresses only, not phone numbers. while on my iphone it is possible to send iMessage to any number (if it's iphone of course).
if I type the name of the contact or his phone number - it turns red and says "contact is not registered with iMessage".. Clearly they are, because i can send them iMessages through my iPhone.
What am I missing ? Is there any way to fix it ?
Thanks in advance,
Lord021

Handoff Continuity Troubleshooting
Handoff Continuity Troubleshooting (2)
SMS Relay - Set up and use –Yosemite/ iOS 8

Caret character in numbers (iWork09) not working with german keyboard

The caret caracter used to express "power to" in formulas can not be typed into formulas with the german keyboard layout. Using the caret key nothing happens. For text and strings in cells the caret key works. In iWork08 everything is fine. For formulas the caret character has such to be inserted using copy and paste.
This is more or less a bug report. I could not find a way to tell Apple directly.
Matthias

Thanks
I'm glad to get this info because I thaught that it was linked to physical keyboards which it isn't.
Report sent:
*Your tracking number for this issue is Bug ID# 6491581.*
Hello
+In Numbers '09 we are unable to type the caret in this kind of formula =2^3 when we are using a keyboard layout where this key is a dead one.+
+I tested Numbers in three languages:+
English
French
German.
+They behave exactly the same way with the keyboards layout where caret is a deadkey.+
+Examples of tested layouts:+
French,
German,
Swedish
+At this time, we must use the Character Palette (or a copy paste) to enter the caret.+
+I wish to add that this bug strikes only in the "edit formula" tool.+
+Whe we type the content of a string, it works.+
+We may use the caret to type the circumflex above thr e in this example:+
+="c'est" & " le même"+
Yvan KOENIG (from FRANCE mardi 13 janvier 2009 10:47:05)

Numbers Mac not syncing with iCloud (file status Waiting)

Anyone else having this problem?
Created a new document in Numbers on my MBP. Saved to iCloud but the status remains as 'Waiting'.
I've unchecked and checked documents in the System Preferences/iCloud to try to reset but no joy. Don't seem to be able to force an update and it's definitely not showing up in iCloud (web or on my phone).
Give up or persist?
Thanks

I am having the same problem on my iMac. It was suggested to me to switch from my wired connection to my wireless connection.
When I did that, all of my documents became synced!
Just to make sure that my wired connection isn't blocking iCloud traffic, I switched back to my wired connection and everything works fine.
If, however, I restart the computer or log out, I have to do the whole process again. (Switch from wired to wireless and then back to wired.)
I am chalking this up to a .0 release. Maybe this will be addressed in 10.8.1.

Numbers Will Not Sync With iCloud On Any Device

Docs in Pages will sync just fine on any device I use (iMac, iPhone 4s, iPad3) as well as photos, music, etc. But I cannot get Numbers to sync and update on any of them regardless of what wifi or cellular connection I am using. I did have to do a hard restore on my iPad in the last week because the Mail app kept crashing. I did not restore from iCloud since doing so made the Mail app keep crashing. I deleted the Numbers docs on both of my IOS devices hoping that would help, but so far no luck. Anyone have a solution for this?

Hello Lockjaw43. No Apple here. We're all fellow users.
Where did you get the idea Numbers has no Save As? In File menu just hold down the option key and you'll see it.
Calendar sync is different from Documents & Data. You might want to doublecheck that this is checked:
AND this is checked (after clicking options):
And on your iOS devices you also need to turn on sync in two places:
Settings > iCloud > Documents & Data > Numbers
Settings > Numbers > Use iCloud
SG

Mac Mini 2014 Boots With Black Background/White Apple

Mac Mini Specs: 2014 Model with 2.6GHz processor, 8GB RAM, 1TB HD, Intel Iris Graphics, Mini-Display Port to DVI adapter with Dell monitor
Issue: When booting the Mac Mini up it goes through a very standard Yosemite boot but the background is black and the apple and progress bar are both white. The issue is entirely cosmetic in nature and doesn't seem to have any negative effects. What I normally expect and have seen in 30+ macs upgraded to Yosemite is the same loading but with a grey screen. It's worth noting that I have noticed this issue on 2 iMac 2010s that had been upgraded to Yosemite that belonged to some friends, but their issues were intermittent or fixed.
Steps Taken:
Updated from 10.10 to 10.10.1 and installed all other available updates
Checked the Start-up Manager, Recovery, and Internet Recovery. All have black backgrounds and internet recovery's globe is small then normal.
Reset SMC and NVRAM
Tested Safe Boot
Erase and Reinstall OS X
Removed all peripherals except monitor
Tested another monitor and DVI cable
Tested HDMI without the adapter
Replaced Mac Mini with new Mac Mini
Questions:
1. Have you seen this issue before and what are the specs of the device it occurred on? (OS, Model, Year)
2. I wonder if this might be expected but can't find anything to reference that it would be and didn't get any answers even when asking people at the store or over the phone. Have you seen any articles/pages that talk about this issue?
3. Can you think of anything else to try and resolve this?

This is normal for the newer machines running Yosemite. There's nothing wrong.

OS X Yosemite 10.10.1 Boots with black screen, white arrow cursor, no menu or icons therefore no control.

OS X Yosemite 10.10.1 Mac Book Pro. Won't power up to show menus or icons. Completely black screen with useless cursor and nothing to click on. cn't run any diagnostics.

What do you mean by "Installer CD does nothing?"
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
lease posted the link for using safe mode. Try clicking on it.

Pin names and numbers do not print with black and white printer setup option

Similar Messages

Maybe you are looking for