Pin object using scroll motion (for mobile website)

I want to pin an object in a specific position. But since the pin option is not available for phone website I was wondering how can I  do this using scroll motions.

Hi
Apply scroll to the object with no field value for movement which would fix that no page.
Thanks,
Sanjit

Similar Messages

  • I use a Flexislider for my website [url removed] I want to use flash and make my website attracti

    I use a Flexislider for my website [url removed] I want to use flash and make my website attractive. Any suggestions?

    Will people be able to login to the FTP server from my website and do everything through their browser?
    Users could use web based ftp client or a 3rd party ftp client.
    Have look at the sytem the following school uses.
    http://www.glenbard.net/Glenbard_DistrictHQ/Media/MOVs/Web-BasedFTPClient.html
    Although I have not setup this type of thing up myself googling around shows a few tutorials using PHP or Java based ftp clients.
    have a look at this article..

  • Can't pin footer menu to bottom in mobile website

    Hi there,
    I am designing my first mobile version of a website. I created a footer menu that must stay at the bottom all time while the other content above is scrolling. This does not work. The option to pin the element is not available (stays grey and cannot be selected). Whether I try to do it in the master-page or in the page itself, whether I mark it as footer or not, whether I put it on a layer which is on top of all or not - nothing works. I am really annoyed and I would be very very very happy if someone could help. Thank you.
    bartl

    Of course, here we go:
    1.) fixed header: scroll motion is activated but anchor position and movements are set to zero.
    2.) fixed footer: scroll motion is activated, anchor position is set to zero. You can either put the movement before anchor to 1 or also to 0, both is fine (important is the anchor position). Movement after anchor is set to zero.
    I hope that helps.
    Best,
    bartl

  • How to use proxy settings for one website

    Hello,
    I have to access the only one website using Proxy settings and for others I don't need proxy to access. Is there a way to configure the internet settings to allow one website using Proxy... Please advise. Thanks!
    Regards,
    Aravin S

    I am also getting this "error".  The printer (8500 A910) connected to the web well enough that it went out and supposedly downloaded a new update, but then it was supposed to print a page showing the email address, but did not.
    So I go in and try to set up the eprint, and it tells me it cannot connect to the sever and I'll need to enter a proxy address and port number.  But my ISP's cable modems do NOT have any static IP address nor do they provide any sort of proxy service.  Everything works just fine with "automatic discovery" (DHCP) for every computer in the house.  No problems there.
    So, since  that's the case, of course I cannot look up some proxy address and port number in my web browser because they're all set up for "automatically detect settings".
    What's baffling is that the printer connected to something at HP to download the "update", and it went through a process that appeared to be what I'd expect it to do if it was updating its firmware.  But it won't connect to whatever it's supposed to connect to to have an email address assigned.
    Does HP supply a proxy server?  If so, what's its IP address or URL, and what port should a person set the printer to try to use?
    UPDATE:
    It appears that the HP site must have just been "down" for about six or seven hours while I was trying to get the printer to connect because it now connected and I got an email address asigned without needing to have any "proxy" stuff set up at all.  It's a shame that the printer does not simply report "HP Site down - try again later" instead of reporting that you need to use a proxy when that's impossible.
    "Now, on to the next problem which is that my emails to the assigned address are all bouncing with a "550 5.7.1 Command rejected" error!

  • Java ME embedded database used in BlackBerry for mobile CRM

    Interested in business applications of Java ME mobile technology, or in embedded database systems available for Java ME?
    If so, take a look at the news posted on McObject's 'Perst Blog'. Maximizer, a British Columbia company, has adopted the Perst Lite open source, object-oriented database for Java ME to integrate with its customer relationship management (CRM) software on BlackBerry devices.
    What Maximizer gets from Perst Lite -- in addition to efficient data management and 'transparent persistence' for developers -- is support for the JSR 75
    specification, which enables database files to be saved to SD cards within the BlackBerry smartphones.
    The post is at at [http://www.jroller.com/perst/entry/perst_lite_chosen_to_improve]{size}{font}

    Spam blocked. As this user has only ever logged in here to post spam, the user account is blocked for a year.
    db

  • How to implement OData based BASIC Authentication using HTML, JavaScript for Mobile Apps using Apache Cordova/PhoneGap and datajs-1.1.1.js library

    Hello,
    I have an issue with OData based BASIC authentication for iOS App created using HTML, JavaScript, SAP UI5, OData and Apache Cordova/PhoneGap.
    Please check the post here http://scn.sap.com/thread/3527245
    Request you to kindly reply on the above given link.
    Thanks and Regards,
    Suraj Kumar

    Hello Prathik,
    The code which I am using for OData based BASIC Authentication, for my Mobile App is as below.
       var onSuccess = function(data) {
       alert("We are Through"); //Just to check that the OData request was sucessful
       var onError = function(err) {
       switch(err.response.statusCode) {  
       case 403 : {
       window.alert("Error Code - 403, Service unreachable ");
       break;
       case 401 : {
       window.alert("The credentials are incorrect or missing!");
       break;  
    // dataUserName and dataPassword are the two variables, in which I am storing my Username and Password, respectively.
       var connectionRequest = {
       requestUri: "ODATA SERVICE URL GOES HERE/",
       headers: { Authorization : 'Basic ' + Base64.encode(dataUsername + ":" + dataPassword) },
       method: "POST"
       OData.request( connectionRequest, onSuccess, onError);

  • Embeded video using video tag for mobile Applications , Phonegap

    Hey.
    I am trying to get an embeded movie to play when I convert the mobile app to an .apk file.
    I can play the video using the dreamweaver "Live" option , and I can watch a video if it has a http:// URL . however the video wont play when I use a rellitive path such as videos/video.mp4
    The actual html block looks like this :
    <!--Working on mobile device -->
    </video>
    <video poster="http://upload.wikimedia.org/wikipedia/commons/thumb/0/0d/Teddy_bear_27.jpg/250px-Teddy_bear_27.jpg" controls>
    <source src="http://www.w3schools.com/html/movie.mp4" type="video/mp4">
    </video>
    <!-- Not working on mobile device -->
    <video width="560" height="340" id="videoToPlay" poster="images/thickGuy.png" controls >
      <source src="videos/broken_compas.mp4" type="video/mp4" />
    When I load onto the mobile device , I get the spinning option, but it never actually loads the video.
    Could this be a file path issue ?
    Has anyone else tried to embed a video for phonegap dreamweverCC ?. I would be very intrested to know if they got it working.
    Cheers

    Thanks John Fritz.
    I was actually trying to use the <code> tag for the entire code block on this form, but it got very messy. I may have deleted / re arranged  some code accidently.
    In the end I used a hacky way , that I know won’t work in other phones, but you may understand my problem a bit more here :
    <video width="560" height="340" poster="images/thickGuy.png" controls id="videoCompass">
    <source src="file:///storage/sdcard0/Movies/broken_compas.mp4 type="video/mp4">
    </video>
    The video dose actually work and play now, but the path is absolute, rather than relative. The question is, where would “broken_compas.mp4”  actually install to on an android , if I hadn’t manually placed the video on a specific folder on the phone? . The only reason this is working is because I had to manually place the video in a folder on the phone.
         Madness me thinks :-)

  • Viewing ROLAP stord objects using Discoverer plus for olap

    Dear All,
    Can I use the discoverer plus for OLAP to view objects stord as ROLAP
    Regards,
    Shaimaa

    Hi David,
    many thanks for your replay ... but forgive me coz i'm new to discoverer would you please give me some guidance on how to use the discoverer plus for OLAP with objects stored by OWB as ROLAP
    Cheers
    Shaimaa

  • Should I use a Webservice for my website for commonly used functoins between 2 web projects(WebApp and WebService)?

    I have a ASP.net web application that currently generates various Crystal Reports. The coding for those reports are in about 2-3 modules.  I have been presented with the task of having to generate the same reports from a new web service.  All sites
    are hosted on my own IIS server, which I manage.  As far as I see it I have 2 options. 
    1. Migrate the functions and reports needed for my reports into a WebService aka "MyReportEngine".  This "Engine could then be accessed by both my website and the other web service.  I would then no code duplication overhead.
    2. Copy report code to the 2nd web service.  IN this case, if I ever made a change to a function in 1 project I would need to make the same change in the web service. 
    Option 2 doesn't seem very efficient to me...
    If someone has another opinion or idea I would love to hear their thoughts.
    All of these web services would only be accessed by my website. They are not intended for public usage.
    Thank you in advance.

    Hello,
    Welcome to MSDN forum.
    I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
    the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
    and Visual Studio Editor.
    Because your issue is related to ASP.NET Web Application and web service, I suggest that you can consult your issue on ASP.NET forum:
    http://forums.asp.net/
     for better solution and support.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to set timer intervals for object + and a motion for entering stage

    Hi, I am making a simple game but I have a couple problems/queries.
    1) My game is a touch an object and you get a point game, currently the objects appear randomly over the screen, however I am trying to get it to slide into the screen similar to the Fruit Ninja game, but not limited to entering from one side, does anyone know how to set this?
    2) As I mentioned above my objects appear randomly, I have set a timer when I change the timer from 800 to another number, it just makes all the objects on the screen last for 800 milliseconds all at the same time then disappear and appear somewhere else on the screen for another 800 milliseconds and it repeats, what I am trying to do is make them come at different intervals, for example:
    Object 1 - constantly appears, so when the 800 millisecond is over, it comes back on a different part of the stage
    Object 2 - I want it to appear every 5 seconds, so when the 800 millisecond is over it will come back on the stage in 5 seconds, but not instantly like Object 1
    But I have no idea how to do this :/ anyone have the code needed for me to do this?
    Sorry for the long questions, I only asked because I really am stuck, I have been trying to do this for over 2 weeks now.
    Thanks very much.
    My Code
    [Code]
    //importing tween classes
    import fl.transitions.easing.*;
    import fl.transitions.Tween;
    import flash.utils.Timer;
    //hiding the cursor
    Mouse.hide();
    var count:Number = 60;
    var myTimer:Timer = new Timer(1000,count);
    myTimer.addEventListener(TimerEvent.TIMER, countdown);
    myTimer.start();
    function countdown(event:TimerEvent):void {
    myText_txt.text = String((count)-myTimer.currentCount);
    if(myText_txt.text == "0"){
    gotoAndStop(5)
    //creating a new Star instance;
    var star:Star = new Star();
    var box:Box = new Box();
    var bomb:Bomb = new Bomb();
    //creating the timer
    var timer:Timer = new Timer(800);
    var timerbox:Timer = new Timer(850);
    var timerbomb:Timer = new Timer(1000);
    //we create variables for random X and Y positions
    var randomX:Number;
    var randomY:Number;
    //variable for the alpha tween effect
    var tween:Tween;
    //we check if a star instance is already added to the stage
    var starAdded:Boolean = false;
    var boxAdded:Boolean = false;
    var bombAdded:Boolean = false;
    //we count the points
    var points:int = 0;
    //adding event handler to the timer;
    timer.addEventListener(TimerEvent.TIMER, timerHandler);
    //starting the timer;
    timer.start();
    function timerHandler(e:TimerEvent):void
              //first we need to remove the star from the stage if already added
              if (starAdded)
                        removeChild(star);
              if (boxAdded)
                        removeChild(box);
              if (bombAdded)
                        removeChild(bomb);
              //positioning the star on a random position
              randomX = Math.random() * 800;
              randomY = Math.random() * 1280;
              star.x = randomX;
              star.y = randomY;
              star.rotation = Math.random() * 360;
              box.x = Math.random() * stage.stageWidth;
              box.y = Math.random() * stage.stageHeight;
              box.rotation = Math.random() * 360;
              bomb.x = Math.random() * stage.stageWidth;
              bomb.y = Math.random() * stage.stageHeight;
              bomb.rotation = Math.random() * 360;
              //adding the star to the stage
              addChild(star);
              addChild(box);
              addChild(bomb);
              //changing our boolean value to true
              starAdded = true;
              boxAdded = true;
              bombAdded = true;
              //adding a mouse click handler to the star
              star.addEventListener(MouseEvent.CLICK, clickHandler);
              box.addEventListener(MouseEvent.CLICK, clickHandlerr);
              bomb.addEventListener(MouseEvent.CLICK, clickHandlerrr);
    function clickHandlerr(e:Event):void
              //when we click/shoot a star we increment the points
              points +=  5;
              //showing the result in the text field
              points_txt.text = points.toString();
                        if (boxAdded)
                        removeChild(box);
              boxAdded = false;
    function clickHandler(e:Event):void
              //when we click/shoot a star we increment the points
              points++;
              //showing the result in the text field
              points_txt.text = points.toString();
              if (starAdded)
                        removeChild(star);
              starAdded = false;
    function clickHandlerrr(e:Event):void
              gotoAndPlay(5);
    [/Code]

    The only thing that affects TopLink is the increment by, as increasing this is what allows TopLink to reduce the number of times it needs to go to the database to get additional numbers. Ie, an increment value of 1 means TopLink needs to go the database after each insert; an increment value of 50 allows it to insert 50 times before having to get a value from the sequence. The cache on the sequence object in the database affect the database access times. While it may improve the access times when the sequence number is obtained from the database, but I believe the network access to obtain the sequence is the greater concern and slow down for most applications. It all depends on the application usage and design though - an increment (and application cache) of 50 numbers seems to be the best default.
    I cannot say what effect the cache vs nocache settings will have on your application, as it will depend on the database load. Only performance testing and tuning will truly be able to tell you whats best for your application.
    Best Regards,
    Chris

  • Use Microsoft Communicator For Mobile for Google T...

    Hello Everyone!
    Does anybody know how to integrate Google Talk into Microsoft Commuicator??? So that we can chat right from the "Contacts" Menu. 
    --Giri--

    @esr86:
    OviChat is simple i agree.. But the problem is that, when using external chat clients like ovichat fring,or anything others, please be aware that it won't sign out when we exit that program.. I had experienced that problem several days ago.. We will be "Online" at all the time 24Hrs throughout. Thats why i asked about Communicator. Similarly, I m trying to get the details to fetch FB account to Communicator!!
    And about your English, you sounds like an Oxford-ian!! far better than me!!
    Regards,
    --Giri--
    --Giri--

  • Problem occured when create a tree table for master-detail view objects using SQL queries?

    I am programming a tree table for master-detail view objects using SQL queries and these 2 view objects are not simple singel tables queries, and 2 complex SQL are prepared for master and view objects. see below:
    1. Master View object (key attribute is SourceBlock and some varaible bindings are used for this view object.)
    SELECT  cntr_list.SOURCE_BLOCK,                   
            sum(                   
             case when cntr_list.cntr_size_q = '20'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr20 ,                   
            sum(                   
             case when cntr_list.cntr_size_q = '40'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr40 ,                   
             sum(                   
             case when cntr_list.cntr_size_q = '45'                   
                  then cntr_list.cntr_qty                   
                  else 0 end ) as cntr45                    
    FROM (       
        SELECT yb1.BLOCK_M as SOURCE_BLOCK,       
               scn.CNTR_SIZE_Q,        
               count(scn.CNTR_SIZE_Q) AS cntr_qty        
        FROM  SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2       
        WHERE       
        scm.cmr_n = scn.cmr_n             
        AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')                 
        OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))                 
        AND scm.shift_mode_c = :ShiftModeCode                           
        AND scm.end_terminal_c = :TerminalCode      
        AND scm.start_terminal_c = yb1.terminal_c                  
        AND scm.start_block_n = yb1.block_n                  
        AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n                  
        AND scm.end_terminal_c = yb2.terminal_c                  
        AND scm.end_block_n = yb2.block_n                  
        AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n           
        AND scn.status_c not in (1, 11)             
        AND scn.shift_type_c = 'V'             
        AND scn.source_c = 'S'       
        GROUP BY yb1.BLOCK_M, scn.CNTR_SIZE_Q       
    ) cntr_list       
    GROUP BY cntr_list.SOURCE_BLOCK
    2. Detail View object (key attributes are SourceBlock and EndBlock and same varaible bindings are used for this view object.)
    SELECT  cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK,                
            sum(                     
             case when cntr_list.cntr_size_q = '20'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr20 ,                     
            sum(                     
             case when cntr_list.cntr_size_q = '40'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr40 ,                     
             sum(                     
             case when cntr_list.cntr_size_q = '45'                     
                  then cntr_list.cntr_qty                     
                  else 0 end ) as cntr45                      
    FROM (         
        SELECT yb1.BLOCK_M as SOURCE_BLOCK,     
               yb2.BLOCK_M as END_BLOCK,  
               scn.CNTR_SIZE_Q,          
               count(scn.CNTR_SIZE_Q) AS cntr_qty          
        FROM  SHIFT_CMR scm, SHIFT_CNTR scn, YARD_BLOCK yb1, YARD_BLOCK yb2         
        WHERE         
        scm.cmr_n = scn.cmr_n               
        AND (scm.plan_start_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS')                   
        OR scm.plan_end_dt BETWEEN to_date(:DateFrom,'YYYY/MM/DD HH24:MI:SS') AND to_date(:DateTo,'YYYY/MM/DD HH24:MI:SS'))                   
        AND scm.shift_mode_c = :ShiftModeCode                             
        AND scm.end_terminal_c = :TerminalCode        
        AND scm.start_terminal_c = yb1.terminal_c                    
        AND scm.start_block_n = yb1.block_n                    
        AND substr(scn.start_location_c,(instr(scn.start_location_c,',',1,5)+1),instr(scn.start_location_c,',',1,6)-(instr(scn.start_location_c,',',1,5)+1)) BETWEEN yb1.slot_from_n AND yb1.slot_to_n                    
        AND scm.end_terminal_c = yb2.terminal_c                    
        AND scm.end_block_n = yb2.block_n                    
        AND substr(scn.end_location_c,(instr(scn.end_location_c,',',1,5)+1),instr(scn.end_location_c,',',1,6)-(instr(scn.end_location_c,',',1,5)+1)) BETWEEN yb2.slot_from_n AND yb2.slot_to_n             
        AND scn.status_c not in (1, 11)               
        AND scn.shift_type_c = 'V'               
        AND scn.source_c = 'S'         
        GROUP BY yb1.BLOCK_M, yb2.BLOCK_M, scn.CNTR_SIZE_Q         
    ) cntr_list         
    GROUP BY cntr_list.SOURCE_BLOCK, cntr_list.END_BLOCK
    3. I create a view link to create master-detail relationship for these 2 view objects.
    masterview.SourceBlock (1)->detailview.SourceBlock (*).
    4. I create a tree table using these 2 view objects with master-detail relationship.
    When I set default value for variable bindings of these 2 view objects and the matching records exist, tree table can work well. I can expand the master row to display detail row in UI.
    But I need to pass in dymamic parameter value for variable bindings of these 2 view objects, tree table cannnot work again. when I expand the master row and no detail row are displayed in UI.
    I am sure that I pass in correct parameter value for master/detail view objects and matching records exist.
    Managed Bean:
            DCIteratorBinding dc = (DCIteratorBinding)evaluteEL("#{bindings.MasterView1Iterator}");
            ViewObject vo = dc.getViewObject();
            System.out.println("Before MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
            System.out.println("Before MasterView1Iterator ShiftModeCode="+ vo.ensureVariableManager().getVariableValue("ShiftModeCode"));
            vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo.executeQuery();
            System.out.println("MasterView1Iterator vo.getEstimatedRowCount()="+ vo.getEstimatedRowCount());
            DCIteratorBinding dc1 = (DCIteratorBinding)evaluteEL("#{bindings.DetailView1Iterator}");
            ViewObject vo1 = dc1.getViewObject();
            System.out.println("Before DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
            System.out.println("Before DetailView1Iterator ShiftModeCode="+ vo1.ensureVariableManager().getVariableValue("ShiftModeCode"));
            vo1.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
            vo1.ensureVariableManager().setVariableValue("DateTo", dateTo);
            vo1.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
            vo1.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
            vo1.executeQuery();
            System.out.println("after DetailView1Iterator vo1.getEstimatedRowCount()="+ vo1.getEstimatedRowCount());
    5.  What's wrong in my implementation?  I don't have no problem to implement such a tree table if using simple master-detail tables view object, but now I have to use such 2 view objects using complex SQL for my requirement and variable bindings are necessary for detail view object although I also think a bit strange by myself.

    Hi Frank,
    Thank you and it can work.
    public void setLowHighSalaryRangeForDetailEmployeesAccessorViewObject(Number lowSalary,
                                                                              Number highSalary) {
            Row r = getCurrentRow();
            if (r != null) {
                RowSet rs = (RowSet)r.getAttribute("EmpView");
                if (rs != null) {
                    ViewObject accessorVO = rs.getViewObject();
                    accessorVO.setNamedWhereClauseParam("LowSalary", lowSalary);
                    accessorVO.setNamedWhereClauseParam("HighSalary", highSalary);
                executeQuery();
    but I have a quesiton in this way. in code snippet, it is first getting current row of current master VO to determine if update variables value of detail VO. in my case, current row is possibly null after executeQuery() of master VO and  I have to change current row manually like below.
    any idea?
                DCIteratorBinding dc = (DCIteratorBinding)ADFUtil.evaluateEL("#{bindings.SSForecastSourceBlockView1Iterator}");
                ViewObject vo = dc.getViewObject();           
                vo.ensureVariableManager().setVariableValue("DateFrom", dateFrom);
                vo.ensureVariableManager().setVariableValue("DateTo", dateTo);
                vo.ensureVariableManager().setVariableValue("ShiftModeCode", shiftModeC);
                vo.ensureVariableManager().setVariableValue("TerminalCode", terminalCode);
                vo.executeQuery();
                vo.setCurrentRowAtRangeIndex(0);
                ((SSForecastSourceBlockViewImpl)vo).synchornizeAccessorVOVariableValues();

  • Why wont Muse allow me to pin objects?

    I am trying to create a pinned header for a mobile website, but the pin option stays grayed out. Is this a feature that is not available for mobile websites?

    I agree that this would be a valuable feature. If it has possible side effects then allow it but pop up a warning or something when it's used with mobile or tablet devices.
    Looks like there's a workaround that seems to work pretty well from when I tried it. Check out this post from another Adobe forum...
    Re: Disable Header Scrolling on a Mobile Device
    Just make sure you apply the scroll features to the header box & all the links in it.

  • How do you use your pictures for web, iPad & smartphones? All the same size??

    i realy think back and froth about this question.
    i guess it makes sense - to use all the same size -  because newest Ipads and Iphones are with retina-screens !??
    on the other hand i use background-pictures for the website with a lenght of 1800px (it's 400 kbit) so it may slow down my the mobile version
    but i know , people always scroll and zoom into evrything with an Ipad and  smartphone ... So what to do?  What is your hint ?
    Thank you for your time ;-))
    Nachricht geändert durch Ideenautomat

    For me anyways, I 'always' create my images to the size I need and then bring them into what ever web design tool I am using wether it is Muse, Dreamweaver, Coda or a number of others. It takes a few minutes longer but I always get the results I need and expect.

  • How to export a mobile website?

    hello, I have made a mobile website for the first time using dreamweaver cs6, using Jquery mobile, when I test it on "live" it works perfectly even if I check it on small screen sizes like smart phone, however I saved it as an html file, uploaded it on my server, and from my phone the text looks super small, it seems like it's maybe not reading it as mobile website? is it the right way of exporting it? or for mobile website should I export it in another format? (not html?) thank you

    Thank you Jon, it's only a html page, am I supposed to save a .js or .css too? this is the page I uploaded:
    http://www.studiomedicosanpio.it/mobile.html
    seems to work fine on the computer but then on my phone (nokia lumia 800) the text is super small, thanks

Maybe you are looking for

  • How to use sort using abap objects

    hello friends,                    i am using the class cl_salv_table to display my ALV. now on my selection screen i have 3 radio buttons,according to the radiobutton selected my output should appear sorted.                   which class can help me

  • Calling a javascript function from Process Request

    Hi, Everybody ,can anybody please tell me that wheather we can write a java script function in process request. And if yes can we write some java script function which will get the handle of some bean and change its value bynamically. Waiting for you

  • Business Role: ZSOLMANPRO (missing info in NavBar)

    Hi I am using Business Role ZSOLMANPRO for CRM Web Client UI (mainly for ChaRM). Anyway, I have tested with SAP_ALL and SAP_NEW and everything appears perfectly. When I remove SAP_ALL and SAP_NEW there are some items missing. The below screenshot is

  • Safari suddenly VERY slow

    I have a iMac G5, a PowerBook G4, and a Dell Desktop all connected to the internet wirelessly via an Airport. This configuration hasn't changed for months, and suddenly this morning my iMac takes forever to load pages via Safari. Remarkably, the inte

  • Signing in to use trial of cs6

    I am having problems signing in to a trial version of cs6.  It has all downloaded fine but when I open the trial version it comes up with a box asking for me to sign in with my Adobe ID.  I click on the sign in button and after a while it comes up wi