Pin Out details for the X-Fi SB0730 SPDIF

Does anyone know the details of the pin outs of the internal connector. I have a seperate SPDIF connector I want to hook up to this connector.

Hi dv8inpp
X-Fi SB0730 -> X-Fi Xtreme Gamer ?
http://lh6.google.es/rmorinr/RqmofJ7cvkI/AAAAAAAAAfs/Z8wkIkob6Jk/s400/XFiGamer2.jpg">
I think is like others X-fi
http://lh4.google.es/rmorinr/RqMqtJ7cvVI/AAAAAAAAAb8/IPrtxXJCDCk/s400/DIY_X-Fi_Output2.jpg">

Similar Messages

Need pin out information for the TB2644 J connectors

The online documentation for the TB-2644 interface block used with the 2532 Switch does not show the pinouts for the output connectors J1-J4. I need this information so that I can run ribbon cables to an external user interface.

Hello KLP,
Welcome to the NI Discussion Forums! If you search for 2644 on ni.com, you will get a link to the TB-2644 product page. This page contains some useful information on the terminal block. In the resources tab open the manuals link and you will see the 8 manuals associated with this device. The NI TB-2644 Installation Instructions has the information you are looking for. You can see the pinouts for the column and row connections on page 3 of the manual as well as some ribbon cables that will fit these connectors. The 2644 is used for matrix expansion in the Dual 8x32 and 2-wire 8x32 matrix modes for the card. The NI-Switches Help (installed when you install the switch driver) shows this information. You can find this help file in Windows in the Start menu under Programs -> National Instruments - > NI-Switch -> Documentation -> NI Switches Help (the documentation folder also has the specifications sheets for each switch and terminal block supported by your version of NI-Switch). If you go to the Devices section in the help file you will find the NI PXI-2532 listed. There is section on the 2-Wire 8×32 Matrix Topology and the 1-Wire Dual 8×32 Matrix Topology. If you check these you can see how each column and row is assigned to one of the connectors on the terminal block. The terminal block installation guide will show you the ordering of the pins. Hope this helps!
Regards,
Browning G
FlexRIO R&D

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

How do i log in on a macbook air with out wifi for the first time

How do i log in on a macbook air with out wifi for the first time

More details needed.
Otherwise just startup the computer and enter your password.
New Mac?
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

Timed out waiting for the CRS stack to start on Second node.

Hi,
I am trying to setup 2 node 11gR2 RAC in vmware. I face the Timed out waiting for the CRS stack to start error on second node while running root.sh.I checked the cluster log files located in /u01/app/11.2.0/grid/log/node1/alertnode2.log it shows as mentioned below.But when i logged into ASM instance and checked the diskgroup and it is in mount state on both nodes,So i am really confused why i ended up with error in 2nd node on running root.sh. Can anyone tell me how to correct this error or any other checking needs to be done?
/u01/app/11.2.0/grid/log/node1/alertnode2.log
[ohasd(23261)]CRS-2765:Resource 'ora.crsd' has failed on server 'node2'.
2014-01-21 21:40:10.314
[crsd(25309)]CRS-1006:The OCR location +DATA is inaccessible. Details in /u01/app/11.2.0/grid/log/node2/crsd/crsd.log.
2014-01-21 21:40:11.217
[ohasd(23261)]CRS-2765:Resource 'ora.crsd' has failed on server 'node2'.
2014-01-21 21:40:12.422
[crsd(25335)]CRS-1006:The OCR location +DATA is inaccessible. Details in /u01/app/11.2.0/grid/log/node2/crsd/crsd.log.
2014-01-21 21:40:13.327
[ohasd(23261)]CRS-2765:Resource 'ora.crsd' has failed on server 'node2'.
2014-01-21 21:40:14.514
[crsd(25356)]CRS-1006:The OCR location +DATA is inaccessible. Details in /u01/app/11.2.0/grid/log/node2/crsd/crsd.log.
2014-01-21 21:40:15.439
[ohasd(23261)]CRS-2765:Resource 'ora.crsd' has failed on server 'node2'.
2014-01-21 21:40:15.440
[ohasd(23261)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
root.sh output
[root@node2 ~]# /u01/app/11.2.0/grid/root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying dbhome to /usr/local/bin ...
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying oraenv to /usr/local/bin ...
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n)
[n]: y
   Copying coraenv to /usr/local/bin ...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2014-01-21 21:37:55: Parsing the host name
2014-01-21 21:37:55: Checking for super user privileges
2014-01-21 21:37:55: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_p
arams
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node 11gdb, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
CRS-2672: Attempting to start 'ora.mdnsd' on 'node2'
CRS-2676: Start of 'ora.mdnsd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.gipcd' on 'node2'
CRS-2676: Start of 'ora.gipcd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'node2'
CRS-2676: Start of 'ora.gpnpd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node2'
CRS-2676: Start of 'ora.cssdmonitor' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'node2'
CRS-2672: Attempting to start 'ora.diskmon' on 'node2'
CRS-2676: Start of 'ora.diskmon' on 'node2' succeeded
CRS-2676: Start of 'ora.cssd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'node2'
CRS-2676: Start of 'ora.ctssd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.drivers.acfs' on 'node2'
CRS-2676: Start of 'ora.drivers.acfs' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'node2'
CRS-2676: Start of 'ora.asm' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.crsd' on 'node2'
CRS-2676: Start of 'ora.crsd' on 'node2' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'node2'
CRS-2676: Start of 'ora.evmd' on 'node2' succeeded
Timed out waiting for the CRS stack to start.
Regards,
007

Hi,
Are you trying to install on Vmware Workstation or Vmware Server?
If you are using vmware server add below line in your .vmx file for both node
scsi1.sharedBus = "VIRTUAL"
First check which scsi serial number are you using as above I have selected scsi1 serial during disk addition,

Table name for shipping details for the given purchase order

Hi,
Table name for shipping details for the given purchase order
regards,
vijay

Had anybody seen that this question was raised 5 years ago?
And the question was about where are the shipping details of a purchase order stored.
The discussion owner hat marked the the discussion a year ago as solved, but did not mark any correct answer and did not tell himself what the solution was.
The correct answer was given by Amitkumar yesterday, it is EKPV
I am locking the discussion to avoid that even more wrong answers are added to this particualr question

Portal Runtime Error,See the details for the exception ID in the log file.

Hi,
I am Working on EP 7.0 .today am Getting this Error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
The exception was logged. Inform your system administrator..
See the details for the exception ID in the log file.
Any Plz Give me idea to Solve this Problem........
Reply ASAP..
Thanks & Regards
kumar

Hi Kumar,
Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
problem will be solved..
regards
Nizam

Is shelling out $59 for the added years of Apple protection worth it?

Hello,
My iPod's been acting a little funny, lately, but, hey, what's new about that. I bought my iPod from Circuit City in June (also bought a $50 warranty thingie with it), but Apple says my one-year warranty expires in 19 days. Can I correct them? Also, is it worth it shelling out $59 for the additional 2 years of Apple protection? Does said protection cover battery service and repairs?
Gateway Windows XP

also bought a $50 warranty thingie with it),
What is a "warranty thingie"?
but Apple says my one-year warranty expires in 19 days.
Do you mean the Applecare Protection Plan (APP) warranty? Is this the "warranty thingie" you bought at Circuit City?
If so, you need to make sure you register the warranty here http://www.apple.com/support/selfservice/agreements
Or is it a Circuit City warranty thingie?
Can I correct them?
Correct Apple about the purchase date? Yes you should.
Go to http://www.apple.com/support/ and put your iPod serial number in at the bottom right. It will show you how long you have left on your warranty (original or extended).
Also, is it worth it shelling out $59 for the additional 2 years of Apple protection?
It is an additional one year (not two years more) of protection for a total of two years from purchase.
A battery replacement after 6 months but inside one year warranty is ~$29 for shipping.
Battery replacement out of warranty is ~$59 plus ~$29 for shipping.
APP also gets you free telephone support for the entire waranty period. Teh standard warranty that comes with the iPod is one support incident in the first 90 days (you are already past this).
Does said protection cover battery service and repairs?
Yes, except for accidents and abuse. See http://www.apple.com/support/products/applecareipod.html

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details.

We are a two iPhone family, both on the same service provider. My wires iPhone is unable to connect to the home network where as mine is! In the settings her phone has no details for the IP address etc where as mine does! I cannot even enter the details manually.
I have done resets on off and nothing? HELP!

What is that and how. I have 3 airports all configured identically and connected to one router via ethernet!
A power cycle is powering down for ~ 1 minute and powering back up.

TS1559 my iphone 3g has greyed out wifi for the past 2 months, and is out of warranty as far as im aware. what can you do to help your customers!??

my iphone 3g has greyed out wifi for the past 2 months, and is out of warranty as far as im aware. what can you do to help your customers!??

First off apple isnt here so they will not answer you. We are user here and we can provide you help
iOS: Wi-Fi or Bluetooth settings grayed out or dim - Support - Apple
iTunes: Restoring iOS software - Support - Apple

How to get the procedure/query details for the corresponding transaction id

Hi,
Is it possible to know the transaction details like (procedure/query) from the correcponding local transaction ID? (for eg:10.10.50935)
I am working on ORA-01591 issue (lock held by in-doubt distributed transaction) and got the details of in-doubt transactions from dba_2pc_pending view. Further I would like to get additional details about the procedure name and query who is triggering the issue.
Thanks

Hi Sybrand,
The response is not of much help. Can you please tell me in more detail.
Suppose a transaction is completed long back (say 5 days ago) and I have a transaction id with me. I would like to know the correcponding procedure/query associated with that transaction id.
Is it really possible to find out old transaction details from any view?

Is there a COMPONENT video OUT solution for the iBook?

I am currently using Apple's Video Adapter (mini-VGA to S-Video) to hook up to my widescreen. Let's face it, S-Video *****. I am trying to find a solution that would allow me to get component video out of my iBook and run that into my widescreen.
Is there a VGA->Component Video Adapter available that would work with the mini-VGA -> VGA adapter that ships with the iBook? (Or some other way to get a component video signal?)
Thanks!
iBook G4 1.2GHz Mac OS X (10.4.3) 1.25 GB RAM

Hi Mactivist,
i am not an expert on this video stuff but I think
you might find this useful. Although the
procedure described is about a Mac Mini (which has a
dvi connector) the guy actually used a DVI-VGA
adapter. Therefore, I believe, the set-up described
should work for you too.
-Petra
Unfortunately, iBooks do not have DVI out. What I really need is a VGA to Component video adapter.
And for the person who wasn't sure what a component video cable looks like, this is a cable that has 3 rca-like plugs on it, each one supplies a different color (RGB I think).
So far, I've not found a VGA adapter that can do this unless you are using an ATI video card as the source.
iBook G4 1.2GHz Mac OS X (10.4.3) 1.25GB RAM

Display vendor name in the additional costs details for the PO

Hi,
I was wandering if there is any possibility to display vendor's name in the additional costs detail in the conditions tab in PO.
As for standard, only the vendor number is shown.
Regards.

Hi,
It is not possible to view the name of vendor there in "Addiitonal Data" screen for the condition type.

Is there any spyware out there for the mac?

Been looking at spyware to monitor teenager's activities on the iphone 5. Seems they all want Jailbreak installed, but I understand that ruins the warranty on the phone. I don't want to do that, or anything illegal. But, we do need to monitor his activities. Any other programs out there? Thanks a ton. I know...the logical thing to do would be to take away the phone, but teachers contact him there, as well as sports coaches, and his own boss sends his hours there. And, with Find My Phone, we can track him. So, we would rather him have the phone, but need to watch it closer.
Thanks.
Sandy

jmFightSpam wrote:
What is a good music subscription service for the Mac, where I can download as many songs as I want to my iPod for a monthly fee?
I don't think there are any. Any kind of subscription service would require DRM. The only type of DRM that the iPods accept are Fairplay which is exclusively used by Apple.

Need details for the following feilds

Hi Gurus,
Need mapping feild names ECC vs BI for these feilds..
1)Journal Header ID and Line Number
2)Journal Entry Line Description
3) Journal Entry Header ID and
4)Journal Entry Name
I have a requirement to send these details details to the legacy system from the BI system.
So, I need to get these deatils from the ECC and then I can transfer these details to other system.
I am unable to find these deatils on the Stanadard GL Extractor :0FI_GL_14 - GL Line Item Details.
Let me know your inputs...

Hi lakshmi,
The following links can help you on getting this information:
http://help.sap.com/saphelp_nw70/helpdata/EN/49/5700570223413085021a8b4ef1087a/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/frameset.htm
At
Nadja Xavier

Pin Out details for the X-Fi SB0730 SPDIF

Similar Messages

Maybe you are looking for