Pin_setup script error during BRM software installation on Oracle 11g

Hello experts,
Please help me fix the following error that occurs during Billing and Revenue Management software installation.
After I installed Third-Party, SNMP and BRM base package softwares, I edited the /opt/portal/7.4/setup/pin_setup.values file as recommended in installation guide and when I run pin_setup script, I get the following error message:
PATH variable IS O.K...
LD_LIBRARY_PATH variable IS O.K...\n
You are the pin user
You are in the pin group\n
Starting setup.\n
+#===========================================================+
+# Installation started at Wed Mar 23 10:48:02 2011.+
+#===========================================================+
User: pin
Password: pin
Alias: pindb
NLS_LANG environment variable: American_America.UTF8
Unable to connect to the database ( Oracle Error ).
Please make sure you entered the correct 'user', 'password', and 'alias'
for MAIN_DB in pin_setup.values, and that the NLS_LANG environment variable
is correct. Then run this install program again.
I'm able to access database using sqlplus pin/pin@pindb, listener is working fine, database is up, tnsping pindb also works fine
Please, which symptoms do you need in order to figure out where the issue is? How ot can be fixed?
Thank you,
Adrian

hello,
Error fixed.
Thank you,
Adrian

Similar Messages

Root.sh script at the end of installation of Oracle Clusteware software

When i run the root.sh script at the end of installation of Oracle Clusteware software i receive the following message:.
Any ideas on how to fix this?
====================================================================
*[root@rac1 cdata]# /ora_dba/crs/oracle/product/10.2.0/db_1/root.sh*
WARNING: directory '/ora_dba/crs/oracle/product/10.2.0' is not owned by root
WARNING: directory '/ora_dba/crs/oracle/product' is not owned by root
WARNING: directory '/ora_dba/crs/oracle' is not owned by root
WARNING: directory '/ora_dba/crs' is not owned by root
WARNING: directory '/ora_dba' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up Network socket directories
PROT-3: Failed to create export file
Failed to upgrade Oracle Cluster Registry configuration
===================================================================
OS verssion is :
Linux rac1.localdomain 2.6.18-194.el5PAE #1 SMP Mon Mar 29 20:19:03 EDT 2010 i686 i686 i386 GNU/Linux ( rhel5 32 bit)
Cluster verssion =11g
Vmware
=================================================================================================
Log file output ----
[root@rac1 client]# cat $CRS_HOME/log/rac1/client/ocrconfig_10171.log
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2010-12-20 13:37:16.649: [ OCRCONF][3086510576]ocrconfig starts...
2010-12-20 13:37:16.650: [ OCRCONF][3086510576]Upgrading OCR data
2010-12-20 13:37:16.672: [ OCRCONF][3086510576]OCR already in current version.
2010-12-20 13:37:16.780: [ OCRCONF][3086510576]Exporting OCR data to [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0]
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Error encountered during opening export file [ora_dba/crs/oracle/product/10.2.0/db_1/cdata/crs/ocr10.1.0.2.0] [-1]
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to call export OCR (-1)
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Failed to make a backup copy of OCR
2010-12-20 13:37:16.803: [ OCRCONF][3086510576]Exiting [status=failed]...
=======================
./runcluvfy.sh out put :
[oracle@rac1 clusterware]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "rac1"
Destination Node Reachable?
rac2 yes
rac1 yes
Result: Node reachability check passed from node "rac1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
rac2 passed
rac1 passed
Result: User equivalence check passed for user "oracle".
Checking administrative privileges...
Check: Existence of user "oracle"
Node Name User Exists Comment
rac2 yes passed
rac1 yes passed
Result: User existence check passed for "oracle".
Check: Existence of group "oinstall"
Node Name Status Group ID
rac2 exists 54321
rac1 exists 54321
Result: Group existence check passed for "oinstall".
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
rac2 yes yes yes yes passed
rac1 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Interface information for node "rac2"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 10.10.0.67 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:64
eth1 10.10.2.102 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:82:EB:6E
Interface information for node "rac1"
Interface Name IP Address Subnet Subnet Gateway Default Gateway Hardware Address
eth0 10.10.0.66 10.10.0.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:1D
eth1 10.10.2.101 10.10.2.0 0.0.0.0 10.10.0.1 00:0C:29:C4:E6:27
Check: Node connectivity of subnet "10.10.0.0"
Source Destination Connected?
rac2:eth0 rac1:eth0 yes
Result: Node connectivity check passed for subnet "10.10.0.0" with node(s) rac2,rac1.
Check: Node connectivity of subnet "10.10.2.0"
Source Destination Connected?
rac2:eth1 rac1:eth1 yes
Result: Node connectivity check passed for subnet "10.10.2.0" with node(s) rac2,rac1.
Interfaces found on subnet "10.10.0.0" that are likely candidates for a private interconnect:
rac2 eth0:10.10.0.67
rac1 eth0:10.10.0.66
Interfaces found on subnet "10.10.2.0" that are likely candidates for a private interconnect:
rac2 eth1:10.10.2.102
rac1 eth1:10.10.2.101
WARNING:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check passed.
Checking system requirements for 'crs'...
Check: Total memory
Node Name Available Required Comment
rac2 1.11GB (1161108KB) 1GB (1048576KB) passed
rac1 1.09GB (1144852KB) 1GB (1048576KB) passed
Result: Total memory check passed.
Check: Free disk space in "/tmp" dir
Node Name Available Required Comment
rac2 570.36MB (584044KB) 400MB (409600KB) passed
rac1 461.97MB (473056KB) 400MB (409600KB) passed
Result: Free disk space check passed.
Check: Swap space
Node Name Available Required Comment
rac2 2.93GB (3068404KB) 1.5GB (1572864KB) passed
rac1 2.93GB (3068404KB) 1.5GB (1572864KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
rac2 i686 i686 passed
rac1 i686 i686 passed
Result: System architecture check passed.
Check: Kernel version
Node Name Available Required Comment
rac2 2.6.18-194.el5PAE 2.6.9 passed
rac1 2.6.18-194.el5PAE 2.6.9 passed
Result: Kernel version check passed.
Check: Package existence for "make-3.81"
Node Name Status Comment
rac2 make-3.81-3.el5 passed
rac1 make-3.81-3.el5 passed
Result: Package existence check passed for "make-3.81".
Check: Package existence for "binutils-2.17.50.0.6"
Node Name Status Comment
rac2 binutils-2.17.50.0.6-14.el5 passed
rac1 binutils-2.17.50.0.6-14.el5 passed
Result: Package existence check passed for "binutils-2.17.50.0.6".
Check: Package existence for "gcc-4.1.1"
Node Name Status Comment
rac2 gcc-4.1.2-48.el5 passed
rac1 gcc-4.1.2-48.el5 passed
Result: Package existence check passed for "gcc-4.1.1".
Check: Package existence for "libaio-0.3.106"
Node Name Status Comment
rac2 libaio-0.3.106-5 passed
rac1 libaio-0.3.106-5 passed
Result: Package existence check passed for "libaio-0.3.106".
Check: Package existence for "libaio-devel-0.3.106"
Node Name Status Comment
rac2 libaio-devel-0.3.106-5 passed
rac1 libaio-devel-0.3.106-5 passed
Result: Package existence check passed for "libaio-devel-0.3.106".
Check: Package existence for "libstdc++-4.1.1"
Node Name Status Comment
rac2 libstdc++-4.1.2-48.el5 passed
rac1 libstdc++-4.1.2-48.el5 passed
Result: Package existence check passed for "libstdc++-4.1.1".
Check: Package existence for "elfutils-libelf-devel-0.125"
Node Name Status Comment
rac2 elfutils-libelf-devel-0.137-3.el5 passed
rac1 elfutils-libelf-devel-0.137-3.el5 passed
Result: Package existence check passed for "elfutils-libelf-devel-0.125".
Check: Package existence for "sysstat-7.0.0"
Node Name Status Comment
rac2 sysstat-7.0.2-3.el5 passed
rac1 sysstat-7.0.2-3.el5 passed
Result: Package existence check passed for "sysstat-7.0.0".
Check: Package existence for "compat-libstdc++-33-3.2.3"
Node Name Status Comment
rac2 compat-libstdc++-33-3.2.3-61 passed
rac1 compat-libstdc++-33-3.2.3-61 passed
Result: Package existence check passed for "compat-libstdc++-33-3.2.3".
Check: Package existence for "libgcc-4.1.1"
Node Name Status Comment
rac2 libgcc-4.1.2-48.el5 passed
rac1 libgcc-4.1.2-48.el5 passed
Result: Package existence check passed for "libgcc-4.1.1".
Check: Package existence for "libstdc++-devel-4.1.1"
Node Name Status Comment
rac2 libstdc++-devel-4.1.2-48.el5 passed
rac1 libstdc++-devel-4.1.2-48.el5 passed
Result: Package existence check passed for "libstdc++-devel-4.1.1".
Check: Package existence for "unixODBC-2.2.11"
Node Name Status Comment
rac2 unixODBC-2.2.11-7.1 passed
rac1 unixODBC-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-2.2.11".
Check: Package existence for "unixODBC-devel-2.2.11"
Node Name Status Comment
rac2 unixODBC-devel-2.2.11-7.1 passed
rac1 unixODBC-devel-2.2.11-7.1 passed
Result: Package existence check passed for "unixODBC-devel-2.2.11".
Check: Package existence for "glibc-2.5-12"
Node Name Status Comment
rac2 glibc-2.5-49 passed
rac1 glibc-2.5-49 passed
Result: Package existence check passed for "glibc-2.5-12".
Check: Group existence for "dba"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "dba".
Check: Group existence for "oinstall"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: Group existence check passed for "oinstall".
Check: User existence for "nobody"
Node Name Status Comment
rac2 exists passed
rac1 exists passed
Result: User existence check passed for "nobody".
System requirement passed for 'crs'
Pre-check for cluster services setup was successful.
=========================================================================
[root@rac1 client]# ps -ef |grep d.bin
root 10699 7654 0 13:54 pts/3 00:00:00 grep d.bin
===================================================================================
Many thanks for help

Thank you Helios . As per oracle we need to contract OS team .
It's My home system can any one help me to fine root cause ?.
many thanks .

Getting error during the Oracle9i installation "Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"

Hi All,
Getting follwing error during the Oracle9i installation “Oracle9i Database Release 2 (9.2.0.1.0) for Compaq Tru64 machine"
u01/app/oracle/product/9.2.0/install/make.log
- Linking Oracle
rm -f /u01/app/oracle/product/9.2.0/rdbms/lib/oracle
cc -L/u01/app/oracle/product/9.2.0/lib/ -L/u01/app/oracle/product/9.2.0/rdbms/lib -o /u01/app/oracle/product/9.2.0/rdbms/lib/oracla
ld:
load_whole_file: Could not malloc 31328. bytes, for /u01/app/oracle/product/9.2.0/lib//libn9.a(asndata.o), didnt attempt to mmap
Stop.
*** Exit 1
While checked the memory details in the machine its showing plenty of free virtual memory.
# ps aux
USER PID %CPU %MEM VSZ RSS TTY S STARTED TIME COMMAND
oracle 1353 0.6 27.2 601M 555M pts/2 S N 09:14:07 5:49.67 /tmp/OraInstall2014-01-21_09-14-02AM/jre/bin/../bin/alpha/native_threads/java -Doracle.installe
root 3033 0.0 0.4 10.4M 7.7M pts/0 R + 10:59:44 0:00.06 ps aux
oracle 1351 0.0 0.0 2.46M 320K pts/2 I N 09:14:02 0:01.36 ksh /tmp/OraInstall2014-01-21_09-14-02AM/installer -Doracle.installer.library_loc=/tmp/OraInsta
oracle 1277 0.0 0.0 2.48M 312K pts/2 I + 09:02:44 0:00.04 -ksh (ksh)
root 1269 0.0 0.0 2.56M 232K pts/2 I 09:01:23 0:00.01 -sh (sh)
root 1268 0.0 0.0 5.31M 768K ?? I 09:01:22 0:00.11 /usr/bin/X11/xterm -ls
root 1 0.0 0.0 608K 96K ?? IL 08:45:31 0:00.08 /sbin/init -a
root 0 0.0 3.9 2.52G 79M ?? R < 08:45:31 0:23.16 [kernel idle]
And I have rebooted the machine still also getting the same error.
Is there any way to resolve this issue??
Regards
prasanta

Pl elaborate the business / technical reason for installing a 15+ year old unsupported software on a 15+ year old unsupported hardware, assuming you are installing an a supported OS version
HTH
Srini

Bootstrap.js script error during eval() "Error initializing JDF library"

bootstrap.js script error during eval(). Everytime I open Adobe Acrobat 6.0 I recieve this error message once it loads up. I also recieve another error messeage while it is in the process of loading "There was an error while loading the plug-in "SaveAsXML.api.' This file was not found. I am wondering if this is why I cannot convert a file to PDF from word when I go to convert from file from adobe acrobat 6.0. It is vital to my business that I convert these files from Word. Even when I try to go to Adobe Distiller the error message "Error initializing JDF library" pops up and will not allow me to convert my file to PDF
Thank you

Hello,
I solved the problem (even if I really don't know how) :-/
What I did :
1. remove all the environnement variables for ORACLE : ORASID, ORACLE_SID, ORAHOME, ORACLE_HOME, ORACLE_BASE...
(I don't know why I have so many variables...)
2. I remove any varible of LANG (NLS_LANG, ORA_LANG...)
3. I checked the rpm (it seems that some of the library where missing, for example libXtst.so.6)
By the way, I installed the patch 6078836. Unzip the patch, it will create the library libdb.so.2. Move this file to /usr/lib
4. I uninstall first the agent and the oms, then the database.
5. I reinstalled everything and run the ConfigureGC.pl script. I had to go through the bug 7483221 (the script failed twice because of invalid login/password, ORA-01017). The procedure is described on several sites, I used this one :
[http://www.idevelopment.info/data/Oracle/DBA_tips/Enterprise_Manager/OEM_10.shtml]
I hope it will help you to complete the installation.
Regards

Error running universall installer using Oracle 11g on Windows server 2003

Hi,
I want to uninstall Oracle 11g on Windows server 2003 and when I run universall installer I receive the following error
Checking swap space: 0 MB available, 500 MB required.
Please advise how to resolve this error and the procedure to uninstall Oracle 11g on Windows server 2003
Thanks,
Ant

Hi;
For swap problem, please check:
Swap space problem on Windows XP
http://www.pcnineoneone.com/howto/swpfile1.html
For remove process please check:
Oracle 11g on Windows Srv 2003
WIN: Manually Removing all Oracle Components on Microsoft Windows Platforms [ID 124353.1]
Regard
Helios

Error in cloneDBCreation.log while installing Oracle 11g

Hi,
While installing Oracle 11g in a Virtual Machine environment , the following error is shown during database cloning :-
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size          1334380 bytes
Variable Size          163578772 bytes
Database Buffers     364904448 bytes
Redo Buffers          5844992 bytes
USERS
specify password for SYS as parameter 1:
specify password for HR as parameter 2:
specify password for OE as parameter 3:
specify password for PM as parameter 4:
specify password for IX as parameter 5:
specify password for SH as parameter 6:
specify password for BI as parameter 7:
specify INPUT metadata import file as parameter 8:
specify INPUT database backup file for tablespace EXAMPLE as parameter 9:
specify OUTPUT database file for tablespace EXAMPLE as parameter 10:
specify OUTPUT log directory as parameter 11:
Sample Schemas are being plugged in ...
ERROR:
ORA-12170: TNS:Connect timeout occurred
Please suggest a solution.
Thanks & REgards
Saswata Mandal.

we are doing a normal installation of Oracle 11g Enterprise edition in a virtual machine system.
During installing , the installer got stuck , while Cloning the database and showed the error.

Unknown errors during manual software update package installation

Hi,
I'm new to the forum.
Recently I've got a serious trouble while installing standalone update packages from disk image files.
After typing my username and password to update my OS manually my computer suddenly fails to install the software packages saying that "the installer has encountered an unknown error which caused the installation to fail."
I've an early 2009 Mac Mini which I bought during the first half of that year. The problem affects all versions of Mac OS X (10.5 and later). It's normal? I've tried everything (permissions repair, SMART check) to fix the problem with no luck. Now I suspect the issue has something else with bad memory or a faulty hard disk.
How curious, System Graph had put a new Super Drive on it because the original had its laser head damaged due to extensive use.
Cheers,
John

FIXED!
Many DMG executables failed to install because their certificates were outdated.
To resolve the problem: uncheck the automatic time setting box and set the clock to an early date.

Error during Extension Builder installation on Mac OS

I downloaded extension builder 2.1 trial version from adobe website: Extension_Builder_2_1_LS1_trial.dmg
When I try to install it, at the end of the installation process, during "validating packages" process it stops and shows me "The installation failed. The installer encountered an error that caused the installation to fail. Contact software manufacturer...".
1. System: OS X v. 10.9 (mavericks)
2. I have Flash Builder 4.7 premium installed on my computer.
3. I have Photoshop CC installed on my computer.
What may be the cause of installation errors?
What do you suggest?
Is there any other version of Extension Builder than I could try to install?

This is not an Adobe error message. Please check your system to rule out any environmental issues such as insufficient hard disk space (2G or so needed after you copied the installer since it will need to unpack some installation files), pending system reboot, download file corrupted etc. then retry installation.

Script error during install

On installing Flash Player (n.n.n.179) on Windows XP, I got the following error twice during the install:
The install did actually finish, but I had different version numbers for the ActiveX and the browser plugin versions. I uninstalled both of the Flash Player versions, and tried to re-install it. However, the script error comes up again, even when cleanly installing it (and it didn't re-install the ActiveX version at all). I'm wondering if it properly installed the plugin version, and I know it didn't install the ActiveX version - I looked in Control Panel to verify this. What's going on, and how do I fix it?

I don't know, I have never seen this error. Try the offline installer(s):
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)

Fatal Error during Live Office Installation

Hi Friends,
I am facing issue in Live Office.
I had installated Live Office but since the Live Office option was not seen in any of the MS Office applications so I tried to uninstall Live Office software.
But its giving me Fatal Error during installation.
Could you please let me know how can I reinstall only BO Live Office software.
Thanks in advance.
Regards
Sindhu

Hi Shubhodeep,
The Live Office version is 3.1
MS OFfice: 2003
Also, I ahve installated BO XI3.1 server.
Earlier it everything was working fine.
Later as the Live office icon was not seen in the Excel so I tried repair it.
After that I am getting this problem: nFata error during installation.
I tried rintsllaing entire BO 3.1 setup completly by cleaning the resigstry. But that also did not help.
It would be great if someone can provide any solution ASAP.
Thnaks
Sindhu

Error -1 after software installation: Factory problem in IPAD - Support in Lima,Peru?

A new IPAD black 32GB VRZ was bought in Las Vegas Fry´s Electronics in September 2012. IPAD was moved to Peru after purchase for personal use.
After a month of use, IPAD restarted by itself, then I tried to reinstall the software via ITunes. Software was recovered but during verification the installation abort showing error -1.
I contacted local Apple local support in Peru and they informed me that I have an origin factory problem in my IPAD and the only solution is to replace the IPAD. They asked to Apple headquarters the guarantee application however they were informed that Guarantee does not apply in Peru, because IPAD was bought with Verizon in Fry´s Electronics???. Guarantee for IPAD with Verizon is blocked for equipments located in Latin America ???
Apple representative gave me the option that guarantee could apply if I returned to Fry´s Electronics in las Vegas to make my complaint. By obvious reasons, I will not make such a long trip from Peru to USA to get the replacement for the IPAD.
The other option they recommended me is that Customer support from Verizon informed to Apple headquarters to deblock the guarantee for this case in order that the local Apple representative can assist me.
I need a contact in Verizon who can support to me for this problem in Peru and solve it. I will appreciate to get an e-mail or any recommendation which can help me in this issue.

A new IPAD black 32GB VRZ was bought in Las Vegas Fry´s Electronics in September 2012. IPAD was moved to Peru after purchase for personal use.
After a month of use, IPAD restarted by itself, then I tried to reinstall the software via ITunes. Software was recovered but during verification the installation abort showing error -1.
I contacted local Apple local support in Peru and they informed me that I have an origin factory problem in my IPAD and the only solution is to replace the IPAD. They asked to Apple headquarters the guarantee application however they were informed that Guarantee does not apply in Peru, because IPAD was bought with Verizon in Fry´s Electronics???. Guarantee for IPAD with Verizon is blocked for equipments located in Latin America ???
Apple representative gave me the option that guarantee could apply if I returned to Fry´s Electronics in las Vegas to make my complaint. By obvious reasons, I will not make such a long trip from Peru to USA to get the replacement for the IPAD.
The other option they recommended me is that Customer support from Verizon informed to Apple headquarters to deblock the guarantee for this case in order that the local Apple representative can assist me.
I need a contact in Verizon who can support to me for this problem in Peru and solve it. I will appreciate to get an e-mail or any recommendation which can help me in this issue.

Error during ecc6.0 installation ..plz help asap

Hi all
i am installing ecc 6.0 on windows 2003 standard 64 bit
with database ibm db2 version 9
i am getting the following error during the installation phase
error during abap import phase
i am attaching error log files
import.monitor.log
===============================================================
INFO: 2007-05-03 22:17:51
Import Monitor is started.
CONFIG: 2007-05-03 22:17:51
Application options:
dbCodepage=1100
dbType=DB6
extFiles=no
importDirs=E:\idesins\51032413\1of6\EXP1;E:\idesins\51032413\2of6\EXP2;E:\idesins\51032413\3of6\EXP3;E:\idesins\51032413\4of6\EXP4;E:\idesins\51032413\5of6\EXP5;E:\idesins\51032413\6of6\EXP6;E:\idesins\51032413\6of6\EXP7;E:\idesins\51032413\6of6\EXP8;E:\idesins\51032413\6of6\EXP9;E:\idesins\51032413\6of6\EXP10;E:\idesins\51032413\6of6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS
jobNum=3
loadArgs= -stop_on_error -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2007-05-03 22:17:51
List of packages with table structure: 'SAP0000'.
CONFIG: 2007-05-03 22:17:51
List of packages with views: 'SAPVIEW'.
TRACE: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is started.
INFO: 2007-05-03 22:17:51 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL' template file is successfully completed.
Primary key creation: after load.
Index creation: after load.
INFO: 2007-05-03 22:17:51
Data codepage 4103 is determined using TOC file 'E:\idesins\51032413\1of6\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
INFO: 2007-05-03 22:17:53
Version table 'SVERS' is found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
INFO: 2007-05-03 22:17:53
Data conversion tables 'DDNTF,DDNTF_CONV_UC,DDNTT,DDNTT_CONV_UC' are found in STR file 'E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR' from package 'SAPSDIC'.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -ctf I E:\idesins\51032413\4of6\EXP4\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\DB6\CENTRAL\AS\DDLDB6.TPL" SAPSDIC.TSK DB6 -l SAPSDIC.log
TRACE: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
ERROR: 2007-05-03 22:17:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-05-03 22:18:21
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-05-03 22:18:21
1 error(s) during processing of packages.
INFO: 2007-05-03 22:18:21
Import Monitor is stopped.
=============================================================
import.monitor.java.log
======
java version "1.4.2_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_14-b05)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_14-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
=========================
sapsdic.log
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Aug 31 2006 22:40:33
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -stop_on_error -loadprocedure fast
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(CREATE TABLE "/SDF/PAT03" ( "PATCH" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "SHORT_TEXT" SAPDB6VARCHAR(60) DEFAULT ' ' NOT NULL , "STATUS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "DELIV_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "DELIV_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "RESPONSIBL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IMPLE_DATE" SAPDB6VARCHAR(8) DEFAULT '00000000' NOT NULL , "IMPLE_TIME" SAPDB6VARCHAR(6) DEFAULT '000000' NOT NULL , "L_IMPL_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "CONFLICTS" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "CONFIRMED" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "BACKUP" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "FROM_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "TO_REL" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "OS" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "DB" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "PATCH_TYPE" SAPDB6VARCHAR(3) DEFAULT ' ' NOT NULL , "ANCESTOR" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "STRICT_SEQ" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "NO_GEN" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "SPAMFIX" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "ADDON_ID" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "ADDON_REL" SAPDB6VARCHAR(12) DEFAULT ' ' NOT NULL , "IGN_CONFLI" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "AP_ANCEST" SAPDB6VARCHAR(20) DEFAULT ' ' NOT NULL , "EPSFILSIZ" SAPDB6VARCHAR(4) DEFAULT ' ' NOT NULL , "HI_ANCEST" SAPDB6VARCHAR(2) DEFAULT ' ' NOT NULL , "COMP_REL" SAPDB6VARCHAR(10) DEFAULT ' ' NOT NULL , "COMPONENT" SAPDB6VARCHAR(30) DEFAULT ' ' NOT NULL ) IN IDE#DDICD INDEX IN IDE#DDICI LONG IN IDE#DDICD)
DbSlExecute: rc = 102
(SQL error -601)
error message returned by DbSl:
SQL0601N The name of the object to be created is identical to the existing name "SAPIDE./SDF/PAT03" of type "TABLE". SQLSTATE=42710
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\nuc\NTAMD64\R3load.exe: END OF LOG: 20070503221753
=============================================
any help will be much appreciated.
thanks.
Message was edited by:
Abdul Wahid Khan

Hi,
Restart the installation from the begining
Regards
Umesh K

Error during Database instance installation of NW04s Portal installation

Hello All,
 This is our system environment:
 Portal - NW04s SR1 (SCS instance on one host) -- finished successfully
 Database - MS SQL Server 2005 on a separate host
We are doing a domain installation. The database was installed successfully, but when trying to install the database instance during the NW04s installation, I am getting the following errors:
ERROR 2007-01-03 11:30:10 [syxxsyshlp.cpp:78]
 syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage) FSL-00001 System call failed. Error 5 (Access is denied.
) in execution of system call 'CopyFile' with parameter (
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.PFL,
DCASAPHR05\sapmnt\EPD\SYS\profile\DEFAULT.1.PFL, FALSE), line (478) in file (synxcfile.cpp).
ERROR 2007-01-03 11:30:10 [syxxcnode.cpp:402]
 CSyNodeImpl::move(const CSyPath &
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL, ISyNode::CopyMoveMode_t 0x3) FSL-02039 Unable to move or rename node
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.PFL with type file/directory to
DCASAPHR05/sapmnt/EPD/SYS/profile/DEFAULT.1.PFL: Overlapped I/O operation is in progress.
ERROR 2007-01-03 11:30:10
 CJSlibModule::writeError_impl() MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-01-03 11:30:10 [iaxxgenimp.cpp:736]
 showDialog() FCO-00011 The step createDefaultProfile with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR .
Could anybody please help me through this process?
Thanks much in advance,
Sunitha

Hi,
I would try adding epdadm and SAPServiceEPD accounts to Administrators group and give Administrators full access to sapmnt shared area. Also double check SAP_EPD_GlobalAdmin domain admin authority and SAP_LocalAdmin and SAP_EPD_LocalAdmin accounts.
Open
DCASAPHR05\sapmnt\EPD\SYS\profile folder using explorer and created file and see if there is any authorzation issues with domail\sapinst account.
good luck
Kondala Rao

Error during iTunes 10 installation - iPod Service failed to start

Hi Everyone,
I am getting this error during installation of iTunes 10(Windows XP).
+*"Service (iPod Service)failed to start.Verify that you have sufficient priveleges to start system services."*+
*Can any of you please help?* I ignored it first and continued with the installation. Then tried to update iphone to iOS 4.1 which crashed. I had to go to Apple store to get my iphone restored. I am having trouble installing itunes and cannot restore data from backup.
I tried uninstalling itunes and deleted all itunes data as suggested by the guy at the Apple store. Still not working. Will appreciate if someone can help resolve this error. Thanks.

I just got off the phone with Apple tech support. The problem with that iPod Service is a problem with XP Service Pack 3, but can be fixed this way:
1. Right click on "My Computer", select "Properties"
2. Click on the Advanced tab.
3. in the Startup and Recovery section, click the Settings button.
4. Click the Edit byutton to edit your boot.ini file in notepad.
5. Look for "/noexecute=" in the file and change the word after the equals to "optin" (sorry - I don't remember what the original setting was anymore).
6. Save the file, close notepad, click the OK button on Startup and Recovery window, then reboot.
The warning message about the iPod Service should stop. Also, this helps with iPhones that are not recognized by Windows or iTunes after an install fails.

URGENT- checksum error during database instance installation

Hi Experts and Developers,
I would be glad,if you can help me solve this.
I did not have any problem during Central instance installation.But getting 2 checksum errors during my database instance installation.
The log file for 1st error says
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024333
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -ctf I E:/DVD1/EXPORTS/EXP1/DATA/SAPSSEXC.STR C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.log
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917024333
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024703
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
Syslog: k xxx : rscpexcc 11
(rscpsumg) Please look also into "C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPSSEXC001.xml".
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
(DB) INFO: BRATEXT created #20060917024719
(IMP) INFO: import of BRATEXT completed (259725 rows) #20060917024803
(DB) INFO: BRATEXT~0 created #20060917025001
(DB) INFO: D010INC created #20060917025001
(IMP) INFO: import of D010INC completed (338126 rows) #20060917025011
(((((I did copy only the first and last few lines))))
(DB) INFO: DM45T~0 created #20060917030515
(DB) INFO: DM46S created #20060917030515
(IMP) INFO: import of DM46S completed (99 rows) #20060917030516
(DB) INFO: DM46S~0 created #20060917030516
(DB) INFO: DM46S~A created #20060917030516
(DB) INFO: DOKCLU created #20060917030516
(RFF) ERROR: invalid checksum in data file "E:/DVD1/EXPORTS/EXP1/DATA/SAPSSEXC.001"
 current table was "DOKCLU"
(DB) INFO: disconnected from DB
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917030913
The log file for second error says
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024334
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -ctf I E:/DVD1/EXPORTS/EXP2/DATA/SAPAPPL1.STR C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.TSK ORA -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.log
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917024335
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: START OF LOG: 20060917024703
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#6 $ SAP
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
C:\usr\sap\SAA\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.cmd -l C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
Syslog: k xxx : rscpexcc 11
(rscpsumg) Please look also into "C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\DB/SAPAPPL1001.xml".
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
(DB) INFO: /SAPDMC/LSOFIL created #20060917024728
(IMP) INFO: import of /SAPDMC/LSOFIL completed (0 rows) #20060917024728
(DB) INFO: /SAPDMC/LSOFIL~0 created #20060917024729
(DB) INFO: /SAPDMC/LSOFIW created #20060917024729
(IMP) INFO: import of /SAPDMC/LSOFIW completed (0 rows) #20060917024729
(DB) INFO: /SAPDMC/LSOFIW~0 created #20060917024730
 (((( I did copy only first and last few lines of this log file ))))
(DB) INFO: IDXRCVPOR created #20060917025240
(IMP) INFO: import of IDXRCVPOR completed (0 rows) #20060917025240
(DB) INFO: IDXRCVPOR~0 created #20060917025241
(DB) INFO: IDXRCVPOR~TIM created #20060917025241
(DB) INFO: INDX created #20060917025241
(RFF) ERROR: invalid checksum in data file "E:/DVD1/EXPORTS/EXP2/DATA/SAPAPPL1.001"
 current table was "INDX"
(DB) INFO: disconnected from DB
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\SAA\SYS\exe\run/R3load.exe: END OF LOG: 20060917025244
For your understanding ,
Here are the steps that i followed,
(1)I am Installing SAP XI on Windows 2003 server standard edition with oracle 9i as database.
(2)I copied the DVDs to HARD DRIVE
(3)I created the Microsoft Loopback adapter,assigned an ip.
(4) Then installed j2sdk 1.4.2 for windows
(5) installed central instance with SAPinst

Hi Carsten,
Thank you for taking a look at my problem.
I am using NW_2004_SR1 (Netweaver 2004 SR1).
Just for your information, the size for those two files on my Hard drive are
SAPSSEXC.001 is 650,240 Kb
SAPAPPL1.001 is 126,608 Kb
and my label.asc in Exports directory is
SAP:NETWEAVER:04SR1:DVD_EXPORT:NETWeaver 04 SR 1 EXPORT DVD:D51030721
label.asc in EXP1 directory is
SAP:NETWEAVER:04SR1:EXPORT(1/3):NetWeaver 04 SR 1 Export CD 1/3:CDxxxxxxxx
label.asc in EXP2 is
SAP:NETWEAVER:04SR1:EXPORT(2/3):NetWeaver 04 SR 1 Export CD 2/3:CDxxxxxxxx
label.asc in EXP3 directory is
SAP:NETWEAVER:04SR1:EXPORT(3/3):NetWeaver 04 SR 1 Export CD 3/3:CDxxxxxxxx
Thank you,

Pin_setup script error during BRM software installation on Oracle 11g

Similar Messages

Maybe you are looking for