Ping Issue / Need Clarification on subnets

I am not able to ping between PC 1 and PC 0 / PC 2 where in I can ping between PC 1 and PC 3.
As per my understanding PC 1 has Ip address of 192.168.3.7/16 which is in the range of 192.168.0.0 - 192.168.255.255 which includes other IP as well they why am not able to reach them which are in /24 subnet. Please clarify my doubt.

A device will typically use ARP to find the MAC address of devices within its own subnet and will use its default gateway to get to devices outside of its subnet. For PC 0 and PC 2 they consider devices in 192.168.3 to be outside of their subnet.
So what is happening is that the ping packet from PC 1 does get to PC 0 and PC 2 but they do not have a mac address for PC 1 and therefore can not send a response to the ping.
HTH
Rick

Similar Messages

Applying patchset 10.2.0.3 ::known issues:: need clarification

Hello all,
i am planning to apply the patchset 10.2.0.3 on my 2 node 10.2.0.2 RAC on Solaris 10.
In the readme.html, under the known issues its mentioned
11.8 Memory Access Mode not Supported in Oracle RAC
In an Oracle RAC set up, if database instances are not running on the same node as Oracle Enterprise Manager Management Service, then monitoring in memory access mode does not display performance chart data.
This issue is tracked with Oracle bug 5559618.Now how do i know whether oracle has some fix for bug 5559618 .
I did search in th metalink, but could not find any patch or anything.
Is this bug fixed in this patchset or will oracle provide some other one off patches for this bug ??
any idea ??
TIA,
JJ

Somebody replied my query on Metalink telling me applying the patchset is the same as the server and to follow the installation manual instructions :) Oracle patchset installation help file (document) could be clearer for the Client installation (as they did include explicit sections for RAC's, etc in the same doc).
Edited by: zaferaktan on Jul 2, 2009 5:31 PM

Need clarification on issue with tablespaces

Hi All,
I needed clarification on this issue with tablespaces.I am following a guideline which says "Presently,The general rule of thumb is to concentrate on tablespaces that are 90% or greater used and have less than 2 GB of free space"
My Scenario:-Now i have tablesace which is 97.23 % and the free space is 10 gb.Please advise me that whats the best next step I can take in this respect?
I am very new to this and just following the guideline,so can you all please explain me some details about this.
Thanks

Well, the guideline says "*and* have less than 2 GB of free space"
Since that tablespace as 10GB of free space, the guideline says that you do not need to concentrate on it. Eh ?
I would be careful with guidelines that are hard-coded in this manner. You need to know the context in which the guideline was set.
Assuming that your database/application doesn't grow suddenly by 1GB or larger (or create temporary segments / objects of 1GB or larger), the "2 GB of free space" might make sense. Then, again, it depends on the extent allocation type. What size are extents getting allocated.
You should check with your organisation's senior DBAs on what happens if you don't concentrate on a tablespace because it is outside the guidelines !

Need clarification regarding the test cable-diagnostics tdr command

Hello,
I've read about the test cable-diagnostics tdr command but I need clarification on the examples listed below to make sure that I am providing the right answer to my co-workers.
Example 1:
CXXX7SW17#show cable-diagnostic tdr int g0/20
TDR test last run on: July 16 10:23:00
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/20    auto Pair A     N/A                        N/A                Normal
                       Pair B     72   +/- 10 meters N/A                Open
                       Pair C     75   +/- 10 meters N/A                Short/Crosstalk
                       Pair D     74   +/- 10 meters N/A                Short/Crosstalk
Does this example mean that there's a cable length issue in the line which is causing the device that it's connected to not to work properly?
Example 2:
CXXX2SW140#show cable-diagnostics tdr int g0/21
TDR test last run on: July 16 09:16:22
Interface Speed Local pair Pair length        Remote pair Pair status
Gi0/21    100M Pair A     N/A                      Pair A           Normal
                          Pair B     N/A                      Pair B           Normal
                          Pair C     N/A                     Pair C           Normal
                          Pair D     N/A                     Pair D           Normal
Does this example state that the cable line is okay for use?
Example 3:
CXXX1SW19#show cable-diagnostics tdr int g0/22
TDR test last run on: July 16 06:36:53
Interface Speed Local pair Pair length            Remote pair Pair status
Gi0/22   auto    Pair A       1    +/- 10 meters N/A               Open
                          Pair B     39   +/- 10 meters   N/A               Open
                          Pair C     72   +/- 10 meters   N/A               Open
                          Pair D     1    +/- 10 meters    N/A              Open
Does this example mean that there isn't a device connected on the other end? No pin-contact?
Thank you very much for any help you could provide.
S

I found this article here at supportforums that seemed like the best explanation I've read so far for TDR info.
Hope that helps.

Ping issues on 80Mb Inifinity

Hello!
So I'm getting an unsual ping issue. It's repeatable on all of my computers whether wireless or through ethernet/powerline, and I can only describe it as hangs in the traffic, where the entire connection will lock up for 500ms-2000ms and cause extreme issues while gaming. I'm attaching a ping test though which I have been using to monitor the issue, and that's done through a simple "ping www.google.co.uk -t" command in cmd.
My pings are fantastic for a BT connection, except when this is happening. This is better than any ping I got with Virgin. I just wish I could get this resolved. I think because I'm using fibre that I am missing all of the ADSL information that's been posted around here. My router home page shows no power levels etc.

I would just like to add to this, I am suffering exactly the same problems.
Homehub5, tried wired pc, wireless laptop, and doen ping tests on 2 tablets
UK Server   Minimum = 19ms, Maximum = 3166ms, Average = 132ms
BBC.co.uk   Minimum = 19ms, Maximum = 3148ms, Average = 78ms
ping.sunet.se   Minimum = 57ms, Maximum = 3477ms, Average = 179ms
google.co.uk   Minimum = 18ms, Maximum = 3249ms, Average = 109ms
it's all the time, not just at a specific time either.
This problem affects any online gaming to the point the games are completely unplayable.
Speaking with support yesterday, they informed me that the game servers website cache information was wrong and "we have fixed that now because we are able to"
I'm a community moderator for EA Battlelog, and I know for a fact BT do not have access to the EA backend.

[svn] 1543: Bug: BLZ-152-lcds custom Date serialization issue - need to add java.io. Externalizable as the first type tested in AMF writeObject() functions

Revision: 1543
Author: [email protected]
Date: 2008-05-02 15:32:59 -0700 (Fri, 02 May 2008)
Log Message:
Bug: BLZ-152-lcds custom Date serialization issue - need to add java.io.Externalizable as the first type tested in AMF writeObject() functions
QA: Yes - please check that the fix is working with AMF3 and AMFX and you can turn on/off the fix with the config option.
Doc: No
Checkintests: Pass
Details: The problem in this case was that MyDate.as was serialized to MyDate.java on the server but on the way back, MyDate.java was serialized back to Date.as. As the bug suggests, added an Externalizable check in AMF writeObject functions. However, I didn't do this for AMF0Output as AMF0 does not support Externalizable. To be on the safe side, I also added legacy-externalizable option which is false by default but when it's true, it restores the current behavior.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-152
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/endpoints/AbstractEndpoint.ja va
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/SerializationContext.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/amf/Amf3Output.java
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/io/amfx/AmfxOutput.java
blazeds/branches/3.0.x/resources/config/services-config.xml

Need Clarification On Internal tables in Start Routine

Hi,
I have intenal table some IT_A which deletes the requests which are populated in to it.
Now I need to populate requests into IT_A from another internal table like IT_B which are of different structure.
I have three fields in common in both internal tables like RNR,Timestamp n SID with different field names
I Need Clarification that if i move the contents of the three fields to IT_A from IT_B by spcifying these three fields.Will the internal table IT_A deletes the Requests?
Thanks,
Sriram.

Hi Sriram,
As mentioned IT_A deleted the request loaded into it.
if you move the contents of the three fields to IT_A from IT_B by spcifying the three fields after the deletion step for internal table IT_A takes place then it wont get deleted.
But it would be deleted if the the contents are moved before the deletion step takes place
regards,
mahesh

Need clarification on Bigfile Tablespaces

In the following Oracle Documentation Lirbary PDF,
    Oracle® Database
    Concepts
    10g Release 2 (10.2)
    B14220-02
    October 2005
section
    Overview of Tablespaces
    Bigfile Tablespaces (page: 3-5)
it says,
    Benefits of Bigfile Tablespaces
    * Bigfile tablespaces can significantly increase the storage capacity of an Oracle database. Smallfile tablespaces can contain up to 1024 files, but bigfile tablespaces contain only one file that can be 1024 times larger than a smallfile tablespace. The total tablespace capacity is the same for smallfile tablespaces and bigfile tablespaces. However, because there is a limit of 64K database for each database, a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces, so bigfile tablespaces increase the total database capacity by 3 orders of magnitude. In other words, 8 exabytes is the maximum size of the Oracle database when bigfile tablespaces are used with the maximum block size (32k).
I need clarification on how to arrive at 8 exabytes ?
1024 x 32k x 64,000 ??
According to the exerpt above, there's no mention of maximum number of Operating System blocks per extent. Unless this was assumed knowledge ... how do I get 8 exabytes ?
And if "a database can contain 1024 times more bigfile tablespaces than smallfile tablespaces", then what's the upper limit on smallfile tablespaces ? -- was this sentence referring to the number of datafiles per smallfile tablespace ? ...
O_o
Thanks !
Message was edited by:
mvanle

Hi,
According to [url http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14237/limits002.htm#i287915]Physical Database Limits page, a bigfile tablespace contains only one datafile or tempfile, which can contain up to approximately 4 billion ( 232 ) blocks. The maximum size of the single datafile or tempfile is 128 terabytes (TB) for a tablespace with 32K blocks and 32TB for a tablespace with 8K blocks. In resume, A bigfile tablespace is a tablespace containing a single datafile that can be as large as 128 terabytes (TB), depending on the block size of the tablespace. In conjunction with setting the initialization parameter DB_FILES to the maximum value of 65,635 the total size of the database can be more than 8 exabytes (EB)
>>how do I get 8 exabytes ?
You can calculate the maximum amount of space (M) in a single Oracle database as the maximum number of datafiles (D) multiplied by the maximum number of blocks per datafile (F) multiplied by the tablespace block size (B):
M = D * F * B. Therefore, the maximum database size, given the maximum block size and the maximum number of datafiles, is:
65,535 datafiles * 4,294,967,296 blocks per datafile * 32,768 block size = 9,223,231,299,366,420,480 = 8EB.Cheers
Legatti

BPM, Workflow and Netweaver - Need Clarification

Hi Guru,
I am new to workflow, BPM and Netweaver. I have several questions about those concepts.
1. What is/are the different between workflow and webflow. Which scenario should take workflow into consideration? Which scenario webflow can be applied to?
2. What is/are the different between workflow and BPM. If I am going to implement workflow in a company, do I need to implement business workflow as well as BPM?
3. I need clarification on Netweaver platform and concept.
4. What is/are the different between workflow in R/3 and workflow under Netweaver?
5. If I am going to implement workflow integrated with R/3 and Outlook email, do I need to buy new wrokflow for Netweaver and Netweaver platform or alternatively, I can use business workflow module under R/3 system?
Sorry for many questions asked. I am new to those products. I am now working on software selection for workflow technology. My company is going to implement new workflow to client. Thank you very much.
Cheers,

Please ask only one (or closely related) questions per thread. This makes it a lot easier to get a good structure in the database of previously answered questions. While we are on the subject of previously answered questions, I think you should have a look at them....
My suggestion is therefore:
1. Close this thread
2. Read the Frequently Answered Questions. Before you ask (here are many workflow answers)
3. Search the forum.
4. Create new threads if you have questions afterwards.

LCD monitor display issue, need help

I have a strange problem with my LCD display, it goes like this:
When I first boot up the mac and the wallpaper appears on the display the image looks perfect, all the tones are right etc, but as the startup progresses, programs loading etc, the display changes suddenly, becomes too bright in the highs, too dark in the lows, and over-saturated in between. Its looks horrible.
I have just discovered that I can correct the issue by going into system prefs, display, selecting the options tab (next to Display and Color) and turning overscan on, then back off, voila, all fixed.
Looks great.
Thing is I have to do this every time now that I start the computer, and Im wondering if anyone knows what causes this issue and if theres anything I can do as a more robust solution.
The kicker is I have the same problem with a viewsonic LCD on my secondary machine (Powermac G5, Osx 10.4), right at the beginning of startup it looks great then suddenly all goes wrong, too dark/light over-saturated. Its as if the image has been blended with itself in multiply mode a la photoshop.
And on my second machine there is no option for overscan so I cant use my quick fix.
Is overscan a feature of the OS or the monitor?
The worst part is I need these displays to work correctly because Im a graphic designer, I need my colors to look right so I can do my job, and while I could go buy a $1000 monitor its not possible atm, and Id kinda like to know why this problem occurs. So if I do buy a different I can be assured the problem wont rear its ugly head again. But I dont think the problme is the monitor. I think its something to do with the communication between the display and the computer.
The monitor can display correctly, and does for a brief moment, then it all goes very wrong. Ive spoken to NEC and they werent much help but Ill be trying them again today too.
But again, I thinks its the computer, not the monitors as I can reproduce the issue swapping out monitors.
I hope Ive described it adequately,
Thanks in advance for any help forthcoming, this is very frustrating and is causing me endless headaches.

Mattdp,
I am currently having the same problem with my 20" cinema display. Did you ever find a long term solution? Apple states that the PowerMac G5 is legacy with no support available, and suggested a reset the PRAM. I did so to no avail. I too have 10.4.11 and thus no "overscan" to turn off. This is my wife's primary computer for her photography business, and the color issue needs to be resolved as quickly as I can find the answer.
Is there a possible solution through the terminal?
Rick

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

Intermittent high ping issues

I've been having occasional high ping issues for quite a while now. They come and go at irregular times, and I'm not sure how to resolve this. Other computers on the network are showing similar latency.
A traceroute to google's public DNS:
Traceroute to (8.8.8.8)
1 L100.LSANCA-DSL-23.verizon-gni.net (71.104.144.1) 1644 ms 1088 ms 1346 ms
2 G10-2-2823.LSANCA-LCR-08.verizon-gni.net (130.81.45.208) 886 ms 1118 ms 716 ms
3 so-7-0-1-0.LAX01-BB-RTR2.verizon-gni.net (130.81.29.142) 1352 ms 1096 ms 1366 ms
4 0.so-2-2-0.XL4.LAX15.ALTER.NET (152.63.10.121) 1026 ms 1432 ms 1246 ms
5 0.so-1-0-0.XT2.NYC4.ALTER.NET (152.63.64.126) 550 ms 792 ms 590 ms
6 TenGigE0-7-0-0.GW8.NYC4.ALTER.NET (152.63.22.45) 846 ms 884 ms 312 ms
7 Internet-gw.customer.alter.net (152.179.72.66) 134 ms 180 ms 444 ms
8 * (72.14.238.232) 274 ms 94 ms 712 ms
9 * (209.85.252.2) 530 ms 1114 ms 1276 ms
10 * (72.14.239.93) 1294 ms 1406 ms 1418 ms
11 * (72.14.236.200) 1586 ms 690 ms 106 ms
12 * (216.239.49.145) 106 ms 108 ms 354 ms
13 google-public-dns-a.google.com (8.8.8.8) 296 ms 104 ms 148 ms
Transceiver statistics:
Transceiver Revision:
7.2.3.0
Vendor ID Code:
4
Line Mode:
G.DMT Mode
Data Path:
Interleaved
Transceiver Information
Downstream Path
Upstream Path
DSL Speed (Kbits/Sec)
3360
736
Margin (dB)
13.5
10.0
Line Attenuation (dB)
55.0
31.0
Transmit Power (dBm)
17.8
11.8

#1 Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that the final hop (bottom-most line of the trace) will contain a hop with your IP address in it. Remove that line. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
#2 Have you tried connecting your modem to the NID ?
I point to http://www.dslreports.com/faq/1317
#3 What is the brand and model of this DSL modem?
#4 If you have a RJ-45 WAN port router: What is the brand and model of it?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

VOIP over VPN need clarification

Hi,
Recently I have implemented Site-to-Site VPN between ASA and sonic wall firewall.
Problem: I can able to make call from ASA side(inside) Ip phone to sonic wall (inside) side Ip phone and vice versa and it’s ringing, But not able to hear voice. So I created VOIP over VPN configuration and applied appropriate service policy towards outside interface. But still I was not able to hear voice.
Tried below mentioned t’shot steps:
From ASA side we had two subnets (10.20.1.x/24 – Data and 10.20.2.x/24 – Voice ) and one subnet (192.168.x.x/24 ) from sonic wall side as interesting traffic ( lan to lan). When I configured site-to-site configuration on both ends my phase-1 and phase-2 came UP and can able to communicate between each other. (In interesting traffic I created two objects and bind those objects as one object-group for source i.e. ASA side lan subnet and one object for remote-Lan as destination)
My call manager is rest behind ASA and Ip phones needs to communicate from sonic wall side to inside ASA.
I can able to make call from ASA side(inside) Ip phone to sonic wall (inside) side Ip phone and vice versa and it’s ringing, But not able to hear voice. So I created VOIP over VPN configuration and applied appropriate service policy towards outside interface. But still I was not able to hear voice.
So, I done supernetting the data subnet and voice subnet into single network i.e. 10.20.x.x/16 at ASA side and applied the configuration changes (changed ACL, nonat rule, Voice QOS ACL accordingly), and I’m able to hear voice both end and I can communicate properly from ASA inside Ip phone to Sonic wall inside Ip phone and vice versa.
My question: I’m not understanding the logic how this supernetting resolved dead voice issue.
Pls clarify my question I’m bit confused on this.

It's not recommended. Although VPNs guarantee a secure pipe end-to-end, they don't guarantee latency and variations in latency (Jitter).

Remote access VPN on ASA5520 Ping Issues.

Hi I hope someone might be able to help me. I have setup a remote access VPN on an ASA 5520. The VPN client connects ok, accepts my username and password and then I am in. I get an allocated IP address of 172.16.1.1 from the local pool. The problem is that I cannot then ping the inside LAN which is 192.168.1.1. I've got isakmp nat traversal set to default which is 20. I've been looking at this all day and I think I've gone crossed eyed, a fresh pair of eyes are definitley required, so any help would be gratefully received. My config is
Saved
ASA Version 7.0(8)
hostname Hospira-firewall
enable password 2KFQnbNIdI.2KYOU encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
dns-guard
interface GigabitEthernet0/0
speed 100
duplex full
nameif outside
security-level 0
ip address 213.212.66.52 255.255.255.248
interface GigabitEthernet0/1
speed 100
duplex full
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/2
shutdown
no nameif
no security-level
no ip address
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
ftp mode passive
same-security-traffic permit intra-interface
access-list NONAT extended permit ip 192.168.1.0 255.255.255.0 172.16.1.0 255.255.255.0
access-list Split standard permit 192.168.1.0 255.255.255.0
pager lines 24
mtu outside 1500
mtu inside 1500
ip local pool mypool 172.16.1.1-172.16.1.253 mask 255.255.255.0
no failover
asdm image disk0:/asdm-508.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list NONAT
nat (inside) 1 192.168.1.0 255.255.255.0
route outside 0.0.0.0 0.0.0.0 213.212.66.49 1
route outside 172.16.1.0 255.255.255.0 213.212.66.49 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy hospira internal
group-policy hospira attributes
vpn-simultaneous-logins 400
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split
webvpn
username user password 08S9WUsiSMr3RauN encrypted
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set hospira esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dmap 1 set transform-set hospira
crypto dynamic-map dmap 1 set security-association lifetime seconds 28800
crypto dynamic-map dmap 1 set security-association lifetime kilobytes 4608000
crypto dynamic-map dmap 1 set reverse-route
crypto map mymap 1 ipsec-isakmp dynamic dmap
crypto map mymap 2 match address NONAT
crypto map mymap 2 set security-association lifetime seconds 28800
crypto map mymap 2 set security-association lifetime kilobytes 4608000
crypto map mymap interface outside
isakmp identity address
isakmp enable outside
isakmp policy 1 authentication pre-share
isakmp policy 1 encryption 3des
isakmp policy 1 hash sha
isakmp policy 1 group 2
isakmp policy 1 lifetime 86400
isakmp policy 65535 authentication pre-share
isakmp policy 65535 encryption 3des
isakmp policy 65535 hash sha
isakmp policy 65535 group 2
isakmp policy 65535 lifetime 86400
isakmp nat-traversal 20
tunnel-group DefaultRAGroup ipsec-attributes
pre-shared-key *
tunnel-group hospira type ipsec-ra
tunnel-group hospira general-attributes
address-pool mypool
default-group-policy hospira
tunnel-group hospira ipsec-attributes
pre-shared-key *
telnet timeout 5
ssh timeout 5
console timeout 0
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
inspect icmp error
service-policy global_policy global
Cryptochecksum:98f85c39a5cbffe66b0f6585d5083c7c
: end
Many thanks

Hi Richard ,
- we don't need access-list with RA connection , we have the dynamic map that acts as a template , so your crypto config :
crypto map mymap 1 ipsec-isakmp dynamic dmap
crypto map mymap 2 match address NONAT
crypto map mymap 2 set security-association lifetime seconds 28800
crypto map mymap 2 set security-association lifetime kilobytes 4608000
crypto map mymap interface outside
map with seq 1 is being binded to the dynamic map , now map 2 you are using the nonat access list as the encryption trigger for this map , so this should not be there as it encrypt traffic from the inside subnet to the pool .
please remove the second entry, then test if not working please provide a capture from the inside interface .
HTH
Mohammad.

B2B Inbound Error : Need Clarification

Hi All,
I would like to illustrate a particular use case for B2B Inbound Errors and if there is any workaround available to get over the problem. We are using B2B version 10.1.2
Use Case Details</strong1. Consider the scenario wherein we have a Inbound EDI File which has 100 transactions in it. B2B reads the file and automatically debatches into individual transactions and processes them separately.
2. Out of the 100 transactions in the input file, if say 5 transactions are error transactions, we have observed that all the 100 transactions error out in B2B.
3. The 95 correct transactions fail with the error "General Validation Error" and the 5 error transactions have the exact error details in the B2B Message Reports.
4. Ideally, B2B should error out only the 5 error transactions and process rest of the 95 transactions without allowing them to fail with "General Validation Error".
I am sure that most of us must have faced this error. Could someone please let me know the folllowing:
1. Is there any setting in B2B by which we can enable it to error out only the transactions which have valid errors in a single file
2. Is there any other workaround that we can take to avoid this issue.
The reason we need to have a solution for this is because in our Production B2B environment we receive inbound files from Trading Partners which have hundreds of transactions in each file.
If, even a single transaction has error, then the whole file errors out and it is quite cumbersome to browse through the B2B Message Reports to get the exact error transaction because all the correct transactions would failed with error "General Validation Error".
Please let me know the inputs.
Thanks,
Dibya

Hi Ramesh,
Thanks for the clarification and information. We have already set the parameter OneErrorAllError = true and my understanding was that if we set this parameter to TRUE, it means that if one transaction in the OUTBOUND batch errors out then the whole batch will error out.
I was not aware that it also holds true for INBOUND. Is there any other way that we can set this parameter based on direction (INBOUND or OUTBOUND).
We would like to have this parameter set for OUTBOUND and disabled for INBOUND Transactions.
Please let me know. Thanks Again.
Regards,
Dibya

Ping Issue / Need Clarification on subnets

Similar Messages

Maybe you are looking for