Pink Artifacts Appear Randomly on Screen

I'm using a brand new iMac G5, and randomly, the screen has pink or discolored artifacts. When the area with the pink is refreshed, it goes away, but is still very annoying and presistant. Even when changing the background, and other system changes, it still persists. I have linked some pictures of what it looks like:
http://r.beta30.googlepages.com/Picture2.png
http://r.beta30.googlepages.com/Picture3.png
http://r.beta30.googlepages.com/Picture5.png
http://r.beta30.googlepages.com/Picture6.png

Okay, if it's brand new, it can't be an imac G5, since that was the chip used before the intel chips. Is this an aluminum imac? If so, is it the 24" model?

Similar Messages

Artifacts appear on the screen

We faced the following problems while using Macbook Air 13" 2012, OSX 10.8.2 When starting the computer after sleep mode sometimes the artifacts appear on the screen. And icons in the upper menu bar disappear. How is it possible to solve these problems?

Thanks very much for the tip.
If anyone has any ideas about the “error compiling movie: unknown error” problem I would be very appreciative to hear. Thanks!

Purple/Green bars appearing randomly on screen

Hello
Earlier today, purple/green bars starting appearing randomly on my imac screen. I managed to grab a screenshot of it.
Sometimes it stops for a long time, and then it reapears for a bit. Is there any way of fixing this?
I am running OS X Mavericks 10.9.2 on a late 2013 imac.
Processor: 2.7 GHz Intel Core i5
Memory: 8 GB 1600 MHz DDR3
Graphics: Intel Iris Pro 1024 MB

There is a one year Apple Hardware Warranty (three year w/AppleCare) on Mac's.
You need to contact your local Apple Store or AASP and make an appointment to have it looked at.
see > Apple - Find Locations

Light and dark solid grey vertical lines appear randomly on screen

This has happened about 4 times in the last couple of months, when these light and dark solid grey lines appear on my screen, I have to turn my computer off by holding down the power button and rebooting it, it fixes the problem for the time being. These lines appear randomly, they have appeared when using Photoshop CS6, also when just using the internet, listening to Pandora. 1 out of the 4 times these lines appeared, there was a ticking/clicking noise... I took it to the local computer shop and they did tests on it twice and found nothing.
Processor:
     2.66 GHz Intel Core 2 Duo
Memory:
     4 GB 800 MHz DDR2 SDRAM
Hard Drive:
Capacity:    319.73 GB
Available:    144.87 GB

Run Apple Hardware Test in extended mode a minimum of 3x back to back. If errors appear this confirms a hardware issue that can only be fixed by taking the machine in for repair.

Ghost volume icon appearing randomly on screen

I have a volume icon that appears on my screen, and much like a ghost in the night, it upsets things..primarily it messes with my mouse to the point where it moves slowly and has difficulty going where I want it to go. When I shut down, it goes away for a while, but then reappears.

It sounds like you have some sort of Backup software that mounts an external drive or network drive periodically.
Generally Macs become less responsive during backups -- and that might explain the jerky mouse movement.

Tiny Cyan and/or Magenta Squares appearing randomly on screen

This just started happening tonight, and no one I know has any idea what it could be. Here is the scrrenshot.... but the fact that it is actually showing up in a screen shot has me worried it might be the graphics card.
I was loading album artwork to iTunes when all of this happened [if that might help anyone help me]
here is the screenshot
MacBookPro Mac OS X (10.4.8)
MacBookPro Mac OS X (10.4.8)

This is usually symptomatic of VRAM corruption. Try shutting down (although I'm sure you have already), leave it off for a minute or so and then see if it changes anything.
You can also try resetting PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
Otherwise, as suggested previously, contact AppleCare.

Red/Pink artifacts on second (TV) display!

I have a NVIDIA GeForce 7300 GT card in my Mac Pro (2007) system connected to one Philips 22" LCD via DVI and the other connected to my Sharp Aquos LC-52XD1E via DVI->HDMI converter and HDMI cable to the LCD TV. During a long time it has been all great, but now when I watching a movie with VLC, QT or some other video software, I get red/pink artifacts all over the screen! See details on the photo link below.
http://picasaweb.google.se/perra.osterlund/ScreenIssue#5343025819636620338
I have tried to re-seat the card, changed the outputs, changed the DVI->HDMI converter, changed the HDMI cable, changed the HDMI input on the TV, but nothing is changed, still having the issue. I suspect that the NVIDIA GeForce 7300 GT is beginning to collapse...
Someone who have any idea?

This is a known issue with the NVIDIA GeForce 7300 GT card and with the extended warranty it can be replaced!

When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

I got my ipad2 replaced yesterday. And this new ipad started giving me problem by crashing aps. Then I restored the ipad twice but the problem was still there. I called apple and they fixed it by doing Reset All Settings. But now I have this weird problem. When I open Mail the screen flickers random blue and gray appeared on the screen. I took a video too. Will that happen again? Is it hardware problem? This ipad2 32GB was replaced yesterday and I think it is refurbished. Are replace product refurbished?

There is no way for anyone here to know if your replacement iPad is a refurbished unit. Per Apple's replacement policy, replacements can be refurbished units. If you feel the unit is not working correctly, take it back, let them check it out and if found defective, they will replace that unit.

Blue or pink stripes appears all over the screen, can't do anything but restart with the button.

I was watching Netflix and all of a sudden, blue stripes appeared in my screen. Then my page seemed to "split" in two and then come back to normal and then there were pink stripes all over the screen and I couldn't see anything else but stripes. I had to restart with the button. It restart correctly, I have been able to watch Netflix again but only on Chrome because on safari it would happen again everytime. Then, iPhoto opened and here we are again, stripes and image "moving", can't help but wait... Then the screen became all white and nothing. I tried to restart it again with the button, but it didn't even made it to the apple interface, juste the sound and then white screen. What is going on, Please? I really need my computer for work this isn't fun!

After all this, you are at a white screen at startup and that is as far as it goes? What operating system are you using?http://www.macworld.com/article/2018853/when-good-macs-go-bad-steps-to-take-when -your-mac-wont- Also try this. https://support.apple.com/en-us/HT201295

Blurry and fuzzy screen appearing randomly AIO 610-1270uk

Dear users of AIO 610-1270, is anyone has experience with blurry and fuzzy screen appearing randomely, black color is disapiring in favor of red, you can see on attached photos.
I upgraded video drivers, but is was helpful for very short time only.
I checked computer's video using hp support assistant, no erroes beenrepotred even screen was blurry and fuzzy durring checking.
I would appreciate any help in this mater
Computer specification:
610-1270uk
PN: LN617EZ#ABU
i7, 6mb RAM, 2Tb HD 23"touch screen, graphic AMD Radeon HD6450A

I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
It's my understanding that there will be no future updates to Tiger, only security fixes.

My father was prompted to download an 'update' which appeared randomly while on his ipad2. since then the screen shows an itune icon and plug. Access has been restricted ever since. is that a virus? and how can he rectify it?

My father was prompted to download an 'update' which appeared randomly while on his ipad2. since then the screen shows an itune icon and plug. Access has been restricted ever since. is that a virus? and how can he rectify it?

No, it is not a virus! Not every unexplained occurrence in life is a virus. Microsoft has a lot to answer for by brainwashing users if its operating systems into thinking anything unusual must be the result of a 'virus'.
It was most likely the recently released iOS system software update that for whatever reason did not complete.
Follow these instructions to fix: http://support.apple.com/kb/HT1808

Random black screen freezes - GPU or PSU issue?

Relevant specs:
Gigabyte Z87
MSI GTX 770 (N770 TF 2GD5/OC) - stock speeds, 335.23 WHQL drivers
i7 4771
750w Antec High Current Gamer
Windows 8.1 Pro 64 bit
For the past three weeks, this setup has been very stable. I then went on vacation for 3 days and then came back. All of a sudden, I then started getting random black screens (which occured in the middle two consecutive LOL matches, I'm quite sure I'm in the tribunal now...). If I'm in the middle of a game, the sound will stutter, and the game/system might appear that it's still playing for a few more seconds even though I can't see anything. I either have to manually reboot, or it'll just restart itself. I don't notice any error message when my system restarts. I tried doing a 3DMARK run to stress-test it, and it black-screened during Fire Strike. Sometimes I'll get a black screen at the Windows desktop doing nothing in particular to stress the card; I even got one in my BIOS setup screen!
This morning, I did a fresh boot and ran GPU-Z. The VDDC graph doesn't look quite right to me, given all the hiccups. Oh, and 5 minutes after that screenshot, another black screen.
The reason I mention the PSU is 1) I noticed that that particular PSU is rated 40A on the 12V rail, and yet the GPU requires at least 42A. but there are two 12V rails on that PSU, for 80A, which should be more than sufficient, and 2) I didn't notice any artifacts prior to any black screen. It's just weird that these would happening out of the blue - it sounds like the kind of issue that would've been present on day 1.
Any thoughts?

I have the same issues.
Specs:
I7-4771
ASRock B85M Pro4
MSI GeForce GTX 750 [N750 TF 1GD5/OC]
Super Flower Golden King SF-550P14PE 550W
Windows 8.1 Pro 64bit
Same thing on Windows 7 Ultimate 64bit
Tried both WHQL and beta drivers. This is the second GTX 750 with the same issues, my first card was replaced.

Apple IMac 27 has a problem. Random black screen. Over 1 year without any fix

Apple IMac 27 has a problem.
Random black screen.
Over 1 year without any successful fix.
IMac 27 10.8.4 (12E55) - bought in 2010
3.06 GHz Intel Core 2 Duo
4GB 1067 Mhz RAM
Graphics ATI Radeon HD 4670 256 MB
The IMac computer screen goes black randomly but the machine still running beyond.
In order to go back to normal i need to awake the computer by hitting with the pointer a hot corner previously created " sleep mode" ( top left ).
..the black screen would come back after one second again..and then again and then again and then again..with different intervals..sometime 2 seconds after the other, sometime as soon as appears the user login screen.
I took the machine to an Apple Store two times over one year, they opened, cleaned it but they didn't replace anything has they could not understand what they real problem was. I was happy for that because they didn't try to make me spend money on something which was not going to solve my issue for sure.
Last time i kindly asked them to inspect everything meticulously, part by part, i left the machine with them for over 2 months. They couldn't understand why this was happening..after couple of weeks, 5 more machines came in with the same problem.
On some of them., upon request of the client they changed the graphic card but apparently this was not the fix, the problem come back again. Apparently changing the graphic card or the screen or else it didn't solve any problem to anyone. I'm almost thinking to "trough it out of the window"..we all spend money for this machines and i think we need to know if Apple is looking in to this or not.
Lately i tried to do an SMS RESET and PRAM RESET, it feels it got better a little but problem still coming back.
Also, all usb devices are disconnected and the problem still there
Below you will see a copy of the console report. I honestly don't understand much of it as i'm not a computer guy.
27/07/2013 11:03:39.837 WindowServer[119]: Created shield window 0xb3 for display 0x04272d40
27/07/2013 11:03:39.837 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:39.906 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001)
27/07/2013 11:03:41.701 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2000), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.702 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:41.704 WindowServer[119]: Created shield window 0xb4 for display 0x003f003d
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c79dc0(2002), shield 0x7fad92c34370(2001), lock state 3
27/07/2013 11:03:41.704 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:45.186 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[740]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:45.208 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:03:52.117 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:52.118 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:03:52.118 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:03:53.763 WindowServer[119]: Created shield window 0xba for display 0x04272d40
27/07/2013 11:03:53.763 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.838 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.880 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:53.883 WindowServer[119]: Created shield window 0xbb for display 0x003f003d
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92c87490(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:03:53.883 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:03:55.209 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[742]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:03:55.252 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist) Throttling respawn: Will start in 10 seconds
27/07/2013 11:04:04.482 WindowServer[119]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
27/07/2013 11:04:04.482 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSGetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.483 loginwindow[43]: find_shared_window: WID -1
27/07/2013 11:04:04.483 loginwindow[43]: CGSSetWindowTags: Invalid window 0xffffffff
27/07/2013 11:04:04.704 WindowServer[119]: Created shield window 0xbf for display 0x04272d40
27/07/2013 11:04:04.726 WindowServer[119]: device_generate_desktop_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:04.795 WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001)
27/07/2013 11:04:05.245 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2000), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.246 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
27/07/2013 11:04:05.253 com.apple.launchd.peruser.502[163]: (com.akamai.client.plist[744]) Bug: 12E55: launchd + 95444 [7DCC9489-2DF5-3807-83FA-EF5666EE8078]: 0xd
27/07/2013 11:04:05.249 WindowServer[119]: Created shield window 0xc0 for display 0x003f003d
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: releasing authw 0x7fad92ebdb20(2002), shield 0x7fad92e6eef0(2001), lock state 3
27/07/2013 11:04:05.249 WindowServer[119]: handle_will_sleep_auth_and_shield_windows: err 0x0
I'm now thinking to try to take the machine to its original firmware and see if it still does it, does anyone have any sugestion?
I use a lot photoshop and other image software, this computer is essential for my work. For more then one year this issue caused me problems.
Luckly i have a Macbook Pro too and i managed to do some of my work there. At last I was thinking to buy an external screen and attach it to the Macbook pro in order to work on my big images. But who wants to spend money again!!!???? This is not a fixture, this is silly. I wish to have my IMAc working again.
The warranty it's obviously over and this problem happened right after the warranty was over...
I write this post because i'm so tired of this issue and online nothing can be found apart from posts from so many people that have the same problem and no fixture has been found.
The only fixture seams to be to buy a new computer... Ole'!!!..new money flowing in in the cashier!! forget it!!! i would rather change company if apple doesn't respond to this.
For over 10 years i have been a Apple owner..
When this problem appears it's like someone it's playing a joke at you...
Comments welcome..
Thanks

Hi, I've seem to have found out the source of the problem.
The issue is related to heat, and an iMac 27" gets hot pretty fast.
If I boot the iMac straight after first start into Windows 7 I seem to get a lit built-in display at all times. I can also boot OS X first and then into Windows 7 and the built-in screen get lit every time as long as the iMac isn't hot.
Strange thing is that the monitor connected to the display port gets lit every time. So I can only assume that the heat only interfere with output to the built-in LED screen.
So this iMac is going to an Apple premium reseller for service, and I'll tell you guys how it went.

[solved] Intel Corporation 82830 CGC: Artifacts appear in X

The more I use my laptop in X11, the more artifacting appears. It gets really bad after 10 minutes of use or so. This is on a Panasonic CF-M34 laptop. I know the hardware is 100% functional too.
Here is lspci ...
[max@coppertop ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
01:04.0 Network controller: AIRONET Wireless Communications Cisco Aironet Wireless 802.11b
01:05.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Here is my xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
# Load "type1"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
# FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
Option "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
Section "InputDevice"
Identifier "touchscreen"
Driver "evtouch"
Option "Device" "/dev/ttyS2"
Option "DeviceName" "touchscreen"
Option "MinX" "250"
Option "MinY" "280"
Option "MaxX" "4000"
Option "MaxY" "3850"
Option "ReportingMode" "Raw"
Option "Emulate3Buttons"
Option "Emulate3Timeout" "50"
Option "SendCoreEvents" "On"
# Option "Calibrate" "1"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
# Option "Repeater" "/dev/ps2mouse"
EndSection
# **nux********************************************************************
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "monitor"
# DisplaySize 269 201
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 82.0
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 40-150
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "vidcard"
Driver "intel"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "vidcard"
Monitor "monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "touchpad" "SendCoreEvents"
InputDevice "Mouse1" "CorePointer"
InputDevice "touchscreen" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI"
Mode 0666
EndSection
And this is what I'm dealing with ...
Last edited by synthead (2009-02-12 10:37:09)

I was just going "...wow, ouch..." at the screenshot and since the model name looked old (and a quick google afterwards revealed that it wasn't), I marvelled at how Linux could manage to display so many colors [on the supposedly old hardware I thought was sitting behind that model name].
Crazy thought, but it sparked an idea: perhaps lower the display depth?
-dav7
Last edited by dav7 (2008-12-23 14:51:37)

In the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops.

i have updated my ipod 4g to ios 5.0. everything went great, but something is not right cause sometimes in the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops. help-me, what should i do?

It occurs with both ripped songs and ITMS songs, but not always the same songs. Just this morning, I had a song skip ahead, then put down the ipod for a few mintues, came back and that same song did not skip ahead at all. I've been on a stretch now of about 20 songs with no skipping whatsoever. Hmmmmmm....
I've used all the five "R"'s multiple times to no avail. It just seems so random, it frustrates me.
Thanks for the help, King

Pink Artifacts Appear Randomly on Screen

Similar Messages

Maybe you are looking for