Pink hue covers my design page

When i am in design mode, there is a pink transparent box that covers the majority of my page. When i go to preview mode, it is gone, but I cannot get rid of it.

Hello,
Please use the View -> Hide Grid Overlay option in Muse to remove the pink section.
Cheers
Parikshit

Similar Messages

Pink hue on iPhone 5 screen after iOS 7?

I did not notice this before updating to iOS 7 this afternoon, but there is now a very visible and distracting pink color on 90% of my screen. The very outside 1/4 inch is normal. I'm not sure if this is a long time problem and only just discovered with all the stark white in iOS 7 or what. There is a thread on macrumors forums with a few others who have had the same problem. I made an appointment at the local Apple Store this evening and the genius said it was a "feature" of iOS 7, which is rediculous, but they stood their ground. There were only a couple other iPhones in the store that had iOS 7 and she said they all displayed the same purple/pink hue on screens with white backgrounds. I did see one other that had the same issue, the others were "in the back". The display iPhones still all had iOS 6 and I didn't see the pink tinge on them. It also doesn't show up on my wife's iP5 (still on iOS 6).
I just can't believe this is intential. Anyone else having this problem? Not sure what to do.
It is most prominant when viewing the screen at a slight angle, depending on the light in the room. Very distracting on web pages, calendar, notes, reminders, etc.

The newone how old it is? It is a age related iusse?
Yes I'm under warranty because I bought the iphone directly to the Apple Store (2 warranty years).
Probably they will propose to change the display.....

Pink hue when opening apps

Yesterday I completed a software update and elected not to update my OS from 10.5.2 to 10.5.3. I installed a TWAIN plugin for an older scanner and VueScan. Both the plugin and application were uninstalled using App Zapper after learning that neither worked out for me. I haven't changed anything else as far as the computer goes.
Every so often upon opening an application such as Text Edit, Safari, App Zapper, Photoshop, and Aperture, my screen changes to a dark pink hue that is transparent, but it flashes once and stops.
The other thing that has happened and continues to happen is in iTunes, Safari, & Firefox I have noted some odd behavior as far as page rendering goes. I'll have the screen size set to anywhere from 1269x963 to 1530x1385. These are just random measurments of typical window sizes from time to time. Clearly they vary.
When I am scrolling up and down white blocks appear, they're dynamic really, flickering even. I noticed this from day one but almost figured that was just how things were. I haven't ever noticed this on my old PowerBook. The number and placement of such boxes varies. I think it's how pages are being rendered but I am not sure.

Hey Edward Staines1,
Thanks for the question and congratulations on your new iPhone 6. Your iPhone 6 includes the beautiful Retina HD display, with a higher resolution and more pixels than previous models. Some third-party application developers may have not yet released updates for these larger displays, so built into iOS 8 is a desktop-class scaler - technology that helps make this software look beautiful on different sized displays. This scaler will resize the entire interface when one of these applications is launched. For more information, you can check out Phil Schiller’s presentation from the September 9th Special Event (roughly around the 15 minute mark):
Apple - Live - September 2014 Special Event
http://www.apple.com/live/2014-sept-event/
Thanks,
Matt M.

My mastro page is not the final page. I can't modified it. The mastro is long 800px but in the design page is long 1000, why?

my mastro page is not the final page. I can't modified it. The mastro is long 800px but in the design page is long 1000, why?

Than you Aish for answer to me
is the first time I use Adobe Muse, my problem is the following:
I want me to do a landing page with a preload.
I have done one page very long (5400px) and i worked just in one mastro because i didn't need other pages.
I have made a group with my menu and the slide. I put the menu at the bottom of the slide because i want the slide appear first of the menu: like a presentation... once the presentation ended scrolling down and my menu will appear and so the site. I want me to do the effect of the menu fixed and everything beneath scrolling up and down.
When i have done it, i realized it couldn't work, because the slide together with the menu remain fixed, but the slide covered everything beneath.!!!! I realized again tha maybe it's better having a page for preload and then let the website to start, so i change my pages in adobe muse.
I added another page in my plan window in adobe muse, i made another mastro page i change the properties in the page make it shorter and i drag the new mastro in the new page, then i copied in the empty page my slide.From there in ahead it doesn't work anything in my mastro page.
Then i deleted everything but not the landing page of the beginning, because i found a preload widget in internet, but now when i activate my mastro in the page in the Plan mode, and with the double click i go inside, i can't modified anything also if i click the option "unlock all in page", and when i go in the site preview everything is uncorrect and it'isn't like my mastro page.
Sorry for my very long mail and i hope you will understand.
Thank you again
regards
Paola

Custom SharePoint 2010 designer page throws "The data source control failed to execute the insert command" exception while adding the new item after the August 13, 2013 CU has installed

We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.     at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values)     at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc    at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex)     at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback)     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit()     at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument)     at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)     at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240)                       0x1300 SharePoint Foundation
Runtime                       tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
Ramasubbu

Try below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered

Intel Mac Mini Pink hue display problem

Originally purchase a refurbed Mac Mini 1.66 Intel Core Duo, and over the years I've upgraded the RAM (w/ 2 Gigs) replace wifi "G" card with "N" card. Unfortunately, my mac mini died. Went to the Apple store in Tampa, and the genius said the logic board was toast.
I replaced the logic board with 1.83GHz Intel Core Duo board, and everything is working fine except for the display.
When it starts up, the standard grey screen now has a pink hue. After booting is finished the screen still has the pink hue. However, after a bit, the screen turns to normal, but there is some flicker. My mini is connected to a Samsung LCD 17" display that is working fine. There are no cable issues, I connected the display to my iBook, and it works fine.
Has anyone come across this before? Do I need to reseat the RAM sticks? Is there a software setting that I need to change since I upgraded from a 1.66 logic board to a 1.83?
The logic board is under warranty, but I was hoping to get some answers that can be easily fixed instead of sending it back.

I took the mac mini to work, and hooked it up to my monitor. It still displayed the pink hue at start up. I'm leaning toward this being a bad logic board.
One thing that is curious is that the screen will loose most of the pink hue as the Mac Mini warms up. It's almost back to normal, but the colors still have a little too much pink even after adjusting the monitor. Also, you can see flicker as it warms up as well.
I'm sending back the logic board for replacement.

In FormView Pager Template shown in design page but not shown in runtime.....

//////////////////////MY TABLE//////////////////
USE [logistics_tab]
GO
/****** Object: Table [dbo].[dtype] Script Date: 02/07/2015 10:19:00 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[dtype](
[dtid] [int] IDENTITY(1,1) NOT NULL,
[dtcd] [char](5) NOT NULL,
[desp] [char](15) NOT NULL,
CONSTRAINT [PK_dtype] PRIMARY KEY CLUSTERED
[dtid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY],
CONSTRAINT [Uq_dtcd_Dtype] UNIQUE NONCLUSTERED
[dtcd] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
////////////MY STORED PROCEDURE/////////////////////
USE [logistics_tab]
GO
/****** Object: StoredProcedure [dbo].[dtype_pro] Script Date: 02/07/2015 10:21:42 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[dtype_pro]
@dtid as int=0,
@dtcd as char(5)='',
@desp as char(15)='',
@status as varchar(50)=''
AS
BEGIN
SET NOCOUNT ON;
if(@status = 'Display')
begin
Select * from dtype
end
else if(@status = 'Add')
begin
Insert into dtype(dtcd,desp) values (@dtcd,@desp)
end
else if(@status = 'Update')
begin
Update dtype set dtcd=@dtcd, desp=@desp where dtid=@dtid
end
else if(@status = 'Delete')
begin
Delete from dtype where dtid=@dtid
end
END
GO
//////////MY DESIGN PAGE/////////////
<%@ Page Title="" Language="C#" MasterPageFile="~/Site.Master" AutoEventWireup="true" CodeBehind="DestnType.aspx.cs" Inherits="LogisticsApp.DestnType" %>
<asp:Content ID="Content1" ContentPlaceHolderID="HeadContent" runat="server">
</asp:Content>
<asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server">
<asp:FormView ID="FormView1" runat="server" DataKeyNames= "dtid" GridLines="Both"
AllowPaging="True" PagerStyle-BorderStyle="NotSet" PagerStyle-ForeColor="Black">
<FooterStyle BackColor="#CCCCCC" ForeColor="Black" />
<PagerStyle BackColor="#B5C7DE" ForeColor="Black" HorizontalAlign="Center" Font-Bold="true" Font-Size="Large"/>
<ItemTemplate>
<table>
<tr><td align="right"><b>Employee ID:</b></td><td><%# Eval("dtid") %></td></tr>
<tr>
<td colspan="2">
<asp:LinkButton ID="EditButton"
Text="Edit"
CommandName="Edit"
RunAt="server"/>
 
<asp:LinkButton ID="NewButton"
Text="New"
CommandName="New"
RunAt="server"/>
 
<asp:LinkButton ID="DeleteButton"
Text="Delete"
CommandName="Delete"
RunAt="server"/>
</td>
</tr>
</table>
</ItemTemplate>
<PagerTemplate>
<table>
<tr>
<td><asp:Button ID="FirstButton1" CommandName="Page" CommandArgument="First"
Text="<1<" RunAt="server" Font-Bold="True" /> </td>
</tr>
</table>
</PagerTemplate>
</asp:FormView>
</asp:Content>
///////MY CODE///////////
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Configuration;
using System.Data;
using System.Data.SqlClient;
using System.Text.RegularExpressions;
namespace LogisticsApp
public partial class DestnType : System.Web.UI.Page
public LogisticsApp.MyConnection.OfcConn constr = new MyConnection.OfcConn();
SqlConnection con;
SqlCommand com;
SqlDataAdapter sqlda;
DataSet ds;
DataTable dt;//for form view
protected void Page_Load(object sender, EventArgs e)
if (!IsPostBack)
BindGrid();
protected void BindGrid()
try
con = new SqlConnection(constr.str);
dt = new DataTable();//for form view
com = new SqlCommand();
con.Open();
com.Connection = con;
com.CommandText = "dtype_pro";
com.CommandType = CommandType.StoredProcedure;
com.Parameters.Add(new SqlParameter("@status", SqlDbType.VarChar, 50));
com.Parameters["@status"].Value = "Display";
sqlda = new SqlDataAdapter(com);
ds = new DataSet();
sqlda.Fill(dt);//for formview
sqlda.Fill(ds);
if (ds.Tables[0].Rows.Count > 0) //Check if DataTable returns data
FormView1.DataSource = dt;
DataBind();
catch (Exception ex)
//lblerr.Text = ex.Message;
throw ex;
finally
if (con != null)
if (con.State == ConnectionState.Open)
con.Close();
con = null;
protected void DtypeFormView_PageIndexChanging(object sender, FormViewPageEventArgs e)
FormView1.PageIndex = e.NewPageIndex;
BindGrid();
//plz plz... help as soon as possible this is simple code but not show at run time....... :(


Good day uzma
abidi
It has been long time since I used Webforms but it look to me like you are using the default options and if there is no data that return in the query then you will not see the PagerTemplate.
1. execute the SP from the SSMS.
2. make sure that you pass the correct @status while executing the SP from the ASPX.
3. check the SQL Server profiler, what query the SQL Server got.
4. Check if DataTable (dt) has data after filling it. else you do not get the "DataBind" part, and the PagerTemplate will not display.
* The basic code look ok in fast review. I might missed something. You should monitor it and get the line that make the issue.
Ronen Ariely
[Personal Site]    [Blog]    [Facebook]

Display items in designated page

This is sooo basic, but being new to Portal, I just can't figure it out:
The case is, I have a page with news-items that users can add and edit. Only the last 5 or 10 items off course, because there maybe hundreds. I used a "custom search" portlet, that only shows the display name and description of the item. One can click the display name to view the item itself.
But this only shows the item text, without a surrounding page. I already found a procedure SHOW_PAGE_FOR_ITEM, but this shows the item on the page with the other hundreds of items. That's no good.
So, Is it possible to view an item inside a designated page or template, as well in view and edit mode? Or do you really have to place each item on a seperate subpage (which I can't believe)?
Adding, viewing, searching and editing of news items should be standard functionality, that is used everywhere around, but I haven't figured it out yet how to implement it in Oracle Portal 10g.
Can anybody give me a clue?

Ton,
I think you refer to SHOW_PAGE_FOR_ITEM in
http://www.oracle.com/technology/products/ias/portal/pdf/cm_search_10g_associated_functions_search.pdf
The procedure has a site_id and a page_id, so you could point your results to any page you want.
I you alter the URL and add the itemid as a parameter, you can point the link to a page which you can design like you want. You can create a portlet on that page which accepts the itemid as a parameter. The portlet should display the item contents, using the content management views.
Hth,
Ton

Screen has a pink hue?

Basics first. iMac G4 running OS 10.3.9
Asking this for my dad so hopefully passing on right info.
He had shut down the computer everything running fine. On reboot everything starts up fine, no problems except that the screen now has a pink hue to it. Icons, text, background, everything. It is usable but hard on the eyes. I gave him what I thought was the command to zap the video ram but it didn't work. Suggestions?

Hi,
Not good!....
http://discussions.apple.com/thread.jspa?threadID=1835074&tstart=50
Sorry to be the bearer of bad news ( again! )
Regards.
Ian.

How to apply style sheet to design page

hi all,
i have a discussion,
how to apply a style sheet to design page in webdynpro.
thanks
vikash

Hi Vikash,
Check the below links which will you idea on the same.
Stylesheet for WDA without integrating in SAP Portal
Apply custom css to WebDynpro application
Thanks
KH

How can we call "SP.UI.Notify.addNotification" methods in sharepoint designer page(.aspx) load without any onclick control?

Hello Friends,
How can we call "SP.UI.Notify.addNotification" methods in sharepoint designer page(.aspx) load without any onclick control?
Scenario: When i was open my page i need to show below script,But here i used button control.
<script type="text/javascript" src="/_layouts/14/MicrosoftAjax.js"></script><script src="/_layouts/14/sp.runtime.js" type="text/javascript"></script>
<script src="/_layouts/14/sp.js" type="text/javascript"></script><script type="text/javascript">
var strNotificationID;
function showNofication()
strNotificationID = SP.UI.Notify.addNotification("<font color='#AA0000'>In Progress..</font> <img src='/_Layouts/Images/kpiprogressbar.gif' align='absmiddle'> ", false);
</script>
<div class="ms-toolpanefooter"><input class="UserButton" onclick="Javascript:showNofication();" type="button" value="Show Nofitication"/> </div>
Thanks
Reddy

Hi Reddy,
You can use the window.onload method for achieving your demand as below:
<script type="text/javascript">
window.onload=function(){
</script>
Hope this helps!
Best Regards,
Eric
Eric Tao
TechNet Community Support

Want to allow designated clients to upload pdf files to a designated page on my cs4 website

want to allow designated clients to upload pdf files to a designated page on my cs4 website. want those files to be live on that page when their upload is complete. this is so I dont have to receive their file and upload it myself.
appreaciate the help.

Everything you have described can be done using PHP (assuming your website is on an apache server). There are three separate "sub-projects" to your overall project:
1. Log-in system. Secrity is an issue here. There are several ways to accomplish this.
2. File upload routine.
3. Display of directory contents in a dynamic webpage.
Fortunately, each of these tasks is explained in the book PHP Solutions, by David Powers. It even presents several different methods for handling the log-in password routine and security. Since your project doesn't require a database, you will want to choose a password storage method that doesn't require one.
The way I would handle this is to create a directory for each client. Maybe the directory name will be the client's ID, like 27, 28, etc. Then the upload routine will use a varible based on the client id, so it will put the right client's files in the right directory.
Overall, this is not a very difficult project, especially if you get the Power's book and read through the appropriate chapters.

Flash 9 Public Alpha work uncomplete format with Khmer Unicode on design page view

I am trying using your trial product in Cambodia to test the
Khmer Unicode of usp10.dll in system32 of Windows XP Professional
and Windows Vista Ultimate, but I am sad to tell you that Flash 9
Public Alpha did not support with Khmer Unicode in the right format
of Khmer Language. Can you include Khmer Unicode Fonts into your
Flash 9 Public Alpha? Even though Flash 9 Public Alpha has some
error of character spaces with with Khmer Unicode on the design
view, but as you press Ctrl key + Enter to test video, it display
well Khmer Unicode Format. Please try correct more on the design
page view, I hope Flash 9 Public Alpha will fully support with
Khmer Unicode.
Khmer
Unicode Downlaod
Thank you and best regards,

In IE it shows as a blank page (white), in Firefox it's all there. I'd suspect a CSS issue.

Aperture 3.4.1 photos exported to Photoshop CS6 have pink hue

I click on a photo in Aperture 3.4.1 and export it to Photoshop CS6. The photo has a pink hue. This never happened before, and to add to the problem, it doesn't happen with every photo...just some of them.
Any thoughts?
Thanks.

You're welcome. Ask more questions (after searching the User Manaul and this forum for answers).
Happy Aperturing!

External monitor has overly pink hue after last update.

Hello I have an older Macbook Pro (2 GHz Core Duo). I am using an external CRT for a second display and after downloading a small security and Safari update two days ago I have been experiencing a strange issue. The color is dominated by a pink hue which I cannot correct in any way. I tried the Color Sync calibration and have also tweaked the settings on the CRT itself but it will not go away.
I should mention that the problem is definitely not the monitor as I use it for my Xbox 360 as well and the color is perfect when using it so I am clueless as to what to do.
I am also without Apple Care so before I drop $50 on a one-time troubleshooting call is there anyone who is also experiencing this problem and has found a way to fix it?
Thanks.

Hi. The same thing is happening to my Mac Pro (2.66 GHz Quad Core). I am using a 23" Samsung LCD/TV display. The color is dominated by a pink hue which goes away and shows up intermittently and that's the weird part - some days it's happenings and some days it doesn't. I've tried the Color Sync calibration both on my Mac and the LCD/TV itself. I know that it's not the LCD display since this is also connected to my Dell PC and I don't have the same issue when I'm using it as a PC display. I can watch TV on it with no problems as well.
My best guess is that it is somehow connected with a graphics cards (NVIDIA GeForce 7300 GT) problem. I might have to take it out and inspect it (clean or something) and put it back. My Mac Pro is about a year old.
This could be a software problem, I'm not sure, I don't know. It has the latest software upgrade.
Am hoping that there is somebody out there that had experience the problem before and found a fix for this.
Thank you.

Pink hue covers my design page

Similar Messages

Maybe you are looking for