Pink vertical small line on my screen

There is a pink vertical small line on my I MAC screen...

Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Similar Messages

  • The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

    Take it to an Apple Store or other service provider for testing.

  • I have a vertical red line on my screen - what's causing this?

    I have a vertical red line on my screen - what's causing this?

    Have you tried this?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Vertical red lines on laptop screen cause shut down

    "hello sir
    i have hp g62 laptop 2 years old. i3 processor ,
    4gb ram, 500gb hard drive, window 7 ultimate and
    1gb graphic card
    my problem is when i turn on my laptop suddenly
    vertical red lines appear on screen and laptop
    screen shut it down while cpu keep running
    without screen
    i have checked with externel monitor and same
    lines seen on externel monitor as well so i think
    display is fine. some time its work fine for 2 or 3
    hrs
    please help
    thank you"

    HP Notebook PCs - Entering Safe Mode (Windows 7)Hi ,  Welcome to the HP Forums!It is a superb  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More  I understand that your display has vertical red  lines, sometimes it will work fine  sometimes for 2-3 hours.If you connect an external display and the same lines appear on it. Have you ran the Windows troubleshooter? Have you ran the  HP Support Assistant ? Have you looked for a HP driver update for the graphic card? As the lines appear on the external also I would run a hardware test on the computer. HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista) Have you checked for viruses and malware? If you start your notebook in Safe Mode do you have the same issue?   To say thanks for replying please click the thumbs up icon below. If this resolved your issue, please notify people by choosing solution provided.  Best of Luck! 

  • Imac 21inch 2010 on boot vertical green lines then white screen ,will not load can anyone help please

    imac 21inch 2010 on boot vertical green lines then white screen ,will not load can anyone help please

    Howdy carliosa,
    If your iMac is not starting up normally you may need to do some checking to make sure things are working correctly. I would suggest starting with the steps in this article -
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Small Line of Unavailable Screen at Bottom of 11.6" MacBook Air

    Does anyone notice on their 11.6" MacBook Air that at the very bottom of the screen there is a small line that applications don't fill when maximized? I always thought it was supposed to be like this because it was the same on every application, but I installed Office 2011 today and now it can utilize the entire screen.

    I think it might be because I had dock set to the bottom of the screen, could someone check this for me? I can get the whole screen filled if I set the dock on the left or right side.

  • Satellite A100-683: Small Lines running through screen

    Hello,
    I bought my Toshiba A100-683 for a month ago.
    The problem is that I sometimes see small grayish lines running through the LCD screen from the top the bottom.
    This is are the type of lines u also see when u use your (phone) camera to make a movie of a monitor / lcd screen.
    I don see them always and seem to appear randomly.
    I've updated my video card drivers but this didn't solve the problem.
    Is anyone familiar with this problem ?? Or knows an solution for it before i will send it for repair.
    LAPTOP SPECS :
    Date 2006/10/14 12:00:44
    Modelname Satellite A100
    Onderdeelnummer PSAA9E
    BIOS-versie 2.00
    Greetings from Holland,
    Gaston

    Hi
    I would recommend connecting it to the external monitor. If the small lines dont appear on the external connected monitor so I suppose the graphic card is ok and possibly only the FL inverter could has a malfunction.
    Anyway, its no matter whats wrong because the warranty should be valid in your case and all replacements should be done for free.
    greetings

  • A vertical red line on the screen

    Sir, my product name is HP Pavilion g6 Notebook pc and having 64 bit operating system. Sir, a vertical red line has appeared on the screen and it is seen when i start my laptop.A few days ago it was dissapeared but next day it again appears.Please help me to remove it.

    Hello irohitgupta,
    Thank you for posting on the HP Forums!
    I understand your computer display is experiencing issues with a red line. I will do my best to assist you! To troubleshoot the issue, please refer to the relevant sections of this HP document: Display Quality Issues
    The sections I would like you to refer to are "several colored vertical lines in the display", "screen is discolored" and "general troubleshooting tips for display quality issues". Please try all of the troubleshooting and let me know the results.
    If the issue persists, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Mario
    I worked on behalf of HP.

  • 4 Vertical coloured lines on my screen

    I bought this ibook in August 2005 in Brighton, England, UK. For the first 3 months it worked with no problems. I then noticed 4 vertical lines on the screen. The lines run form top to bottom of the screen and they are evenly spaced across the screen. They are orange, yellow, purple and white and about 1mm across.
    Any ideas on how to fix this problem?
    Many thanks,
    Pete

    Hi Hanoipete,
    Welcome to Apple Discussions,
    You may want to look at Knowledge Base Document #22194 on About LCD display pixel anomalies as well as try running PiXel Check. If all else fails, bring it to your local Apple Store and see if they will replace it.
    Jon
    Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more...  Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

  • Vertical Grey lines appearing on screen

    Smudgy type grey lines appearing on right hand side of my imac screen , they run from top to bottom with varing degrees. Can someone advise as what to do.

    Run Apple Hardware Test in Extended Mode, if you get a error code then take it to your local Apple Store or AASP for a repair estimate. Chances are it's your graphics card failing. If you would like some additional information please read LCD displays common problems.

  • I just bought an iPad 3 around 6 days ago, today I saw a vertical black line on the screen and I tried resetting my iPad but I couldn't fix it. I took it to many apple sale store and reseller but none of them agreed to fix my iPad, please help me with it!

    I'm currently living in Saudi Arabia but I bought my iPad 3 from Dubai around 6 days ago, my device is still under warranty but none of the apple stores are fixing it over here in Saudi Arabia... Please help me with my situation!

    Hi Eric Ferguson,
    Thanks for using Apple Support Communities.
    For troubleshooting on this, take a look at this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Best of luck,
    Mario

  • Thin vertical colored lines on screen

    It started with one fine vertical green line on the screen about 4 months ago. Now there are 12 in various colors with more coming every week. What is causing this? Is there a fix?
    GranAnn

    Have you booted off the Install Disk by holding the *d key* down at boot-up, (not the c key), and run the extended Apple HW Test? Some Install disks require holding the Option key at bootup to select the AHT. Some Macs came with separate AHT CDs.

  • Has anyone else noticed small lines arcoss the iPad three

    My iPad has small lines across the screen when held up to the light is this the new pixel signal structure

    Hi Doug,
    I'm sure I did not notice a difference in Esc key behavior simply because I have never tried to use the Esc key to stop the Pen Tool from picking up the current path.
    I just tested with all these versions of Photoshop:  6.0, CS2, CS3, CS4, CS5, CS6, CC 14.x, and CC (2014) on my PC workstation running Windows 8.1.
    Observations:
    Photoshop versions 6.0, CS5, and CS6 DO terminate the creation of the current path at the current point upon pressing the Esc key. However, Photoshop versions CS2, CS3, CS4, CC 14.x, and CC (2014). do not terminate the creation of the path upon pressing Esc, and will continue the path with another pen click.  Photoshop CC 14.x and CC (2014) may make it SEEM like the path creation is terminated because they hide the points, but the next click continues the path and causes all the points to reappear.
    In every case holding the control key down (to temporarily choose the Direct Selection Tool) and clicking off the current path terminates the creation with an open path and allows the creation of another separate path.
    No version closes the path (made the path into a closed shape) upon pressing Esc.  The only way I know to close a path is to bring the cursor back to the starting point, watch for a little o to appear next to the cursor, then click the mouse.
    With Photoshop 6.0, CS2, CS3, CS4, and CS5 the response of the Pen Tool was instantaneous.  There was a definite slowdown / sluggishness in Photoshop CS6 and CC 14.x, which is now corrected in Photoshop CC (2014), which is again instantly responsive.
    The only other thing I can think of regarding closing a path might be that when using the Pen Tool there are choices in the Options Bar about whether you're creating a shape or a path.  Are you ensuring you have that set the same way as you have had it set in the past?
    -Noel

  • Fix cost for 1 pixel vertical green line

    How much would it cost to fix a monitor with 1 pixel width vertical green line down the screen?

    Hello,
    I have a similar issue since this morning.... MacBook Air 13"  C02GM1ASDJWV
    And also 3 months after the warranty is over....Strange.....
    In general, i'm starting to be disapointed with apple products as like my iphone, i had issue juste after the one year warranty was finished. I'm wondering why?
    Please notice that i'm a user since a long time of mac products and didn't had any issue before. It was the reason i was staying a mac user. But now things seems different.
    I'll have a look if i can change my computer screen my self or for  a sheap price somewhere. But no way that i spend 500euros for that....

  • IBook G4 14" freezes at start up or just shows vertical color lines

    Hello, I am struggling with my 14" iBook G4. It either freeze at the early phase of starting up with gray background/apple icon, or shows vertical colorful lines on the screen. I tried to wipe out the HD and reinstall OS, it froze during installing. Whatever is shows on the screen does not mirror to an exteral display. I don't know if anyone has experience on this, a display issue, HD issue, or a more serious logic board issue. By the way, I was able to install OS TIGER on its HD by starting it in target mode and hooking up to another ibook with firewire cable. Any suggestion will be very appreciated. - I am not very experienced with Mac, trying to learn more at this forum. Thank you.

    Hello, Cornelius. I am back. Here is what I did. I inserted the hardware test disk, restarted computer, while holding down "c" key. I could hear disk spinning. The colorful lines showed at begining, then they went away, leaving faint backlight on the screen, and DVD drive went silent. Then I restarted it, while holding down apple+L keys, like what you suggested. Disk spins, colorful lines stay, and then everything goes silent. While I was doing this, I hook the mini DVI port to a CRT monitor which I know works well for my powerbook. But no video signal was transferred to it at all, except a turning-on signal. I have another disk says "applecare protection plan", aslo says"techtool deluxe". I don't know what this is for, should I try this? I will be waiting for your or other pros' further instruction. I feel the frustration, but enjoy the learning process. Thank you very much for your precious suggestions.

Maybe you are looking for

  • Regarding Vendor balance confirmation Report

    Hi Experts        I have a small issue in FI Module while using standard Programe(SAPF130K). If you execute the above program and pass the parameters vendor no and posting date then only get the data. But my client requirment is Get the data based on

  • How to create a separate invoice for each delivery line?

    Hello, Our customer is requesting a separate invoice for each delivery line. Is there a way to configure this? Or a customization? Thanks, Joy

  • Problem printing the methods due to lack of understanding

    Okay, i'm pretty sure i have all my code correct except for the System.out.println's at the top to print the methods below. What am i doing wrong? Its suppose to be a program that prompts for amount of random numbers, the first part sorts/finds the m

  • Settlement of WBS with Partially Released status

    Hi colleagues, We are encountering problems during our settlement to AUC. Although the settlement rule is maintained, the system does not allow us to post the settlement to a WBS with "PREL" (partially released) status. Is this really the standard of

  • Are there BAPI or function modules for creating posting address ?

    Are there BAPI or function modules for creating posting address and budget address? We are currently use BDC program and T code FMBSPO_MULT (Posting address) and T code FMBSBO_MULT(budget address), but it is a very slow processing because we have tho