Pinned tabs disappear under certain circumstances, without removing them yourself.

This is how to get the problem:
1) Open Firefox
2) Create multiple tabs
3) Pin some, leaving at least two unpinned
4) Move one tab out of the window, creating its own window
5) Close the original window first, then the one you just created
6) Open Firefox again
If you follow the steps correctly you'll notice that the pinned tabs are no longer there.
I find it very frustrating, and this has happened to me way too many times. The tabs should remain there until you actually remove them yourself.
Proposed solutions?:
-When you move a tab out of the current window to put it in its own window, it will also copy the pinned tabs over to the new window.
-Have a spot for the pinned tabs in settings, so no matter what you do, they will come back when you reopen Firefox, and will not go away until you actually unpin them yourself.

Pinned tabs are tied to a specific window and each window can have its own set of pinned tabs.
If you tear off a tab to another window then that is a new window that doesn't inherit pinned tabs, so you would have to recreate them.
If you close a window then you would have to restore that closed window.
Use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox and close all open windows at once to avoid losing the window with the pinned tabs.

Similar Messages

Samples Not Acquired on NI 660x or NI 6624 Devices When using pulse width, semi-period or two-edge separation buffered measurements with the NI 660x and NI 6624 on counters 0 and 1, some samples may not be acquired under certain circumstances.

In the DAQmx 9.4 Readme the following is stated:
Samples Not Acquired on NI 660x or NI 6624 Devices When using pulse width, semi-period or two-edge separation buffered measurements with the NI 660x and NI 6624 on counters 0 and 1, some samples may not be acquired under certain circumstances.
Could anyone elaborate on this? I am particularly interested in knowing under what circumstances this problem arises for the 6602 PCI devices.
How should I understand 'NI 660x and NI 6624 on counters 0 and 1'. Is it only a problem on counter 0 and 1 for the 660x or does this only apply for the 6624 devices.
/mola

Are there any NI Product Support Engineers out there who has an answer to this question and who are willing to share it with me?

Removing songs from itunes without removing them from ipod

Is it possible to remove songs from iTunes without removing them from iPod? When I attempt to delete songs from iTunes I get a warning that they'll be deleted from iPod as well. I've got Manually manage music and videos checked under Options in the Summary window.

You can delete songs from your iTunes/computer hard drive after transferring them to the iPod, and for this you need to set your iPod to manage the iPod content manually.
However, this is an extremely risky option because when (and not if) there comes a time to restore your iPod, which is a very common fix for iPod problems, then all the music would be erased. If you no longer have the music in iTunes (or any other back up), then all that music would be lost.
What if the iPod were lost/stolen/needed repair? Again, the music would lost. I strongly recommend a back up, and if computer hard drive space is in short supply, you should seriously consider an external hard drive. They are not expensive, and the cost is well worth it when compared to the loss of all your precious music.
At the very least back up your music to either cd or dvd before deleting it, particularly any purchased music/videos, as this would have to be bought again if it were lost. See these about backing up media.
How to back up your media in iTunes.
Buegie's complete back up strategy.
To move music from iPod to computer, check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it can be messy.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music and playlists etc from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
There is also CopyPod. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
If you are using iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.

My old laptop broke (idk what kind) and my iTunes was on there and now i got a new macbook pro. how do i get my itunes music and videos and etc. on this computer without removing them on my phone? please help!

My old laptop broke (idk what kind) and my iTunes was on there and now i got a new macbook pro. how do i get my itunes music and videos and etc. on this computer without removing them on my phone? please help!

If the old laptop was a mac also, then use your Time Machine backup to restore you user settings and files.

Process security headers without removing them

Does anyone know whether it is possible to have OSB process security headers without removing the headers from the message?
I would like to be able to validate the signature and grab the principal from the certificate in order to determine whether the request should be allowed to continue on. However, the signature cannot be removed from the message because the business service requires requests to be signed (and the requests must be signed by the original requester, not an intermediary).
See Process security headers without removing them also
Helmar

I don't know a way of doing this with OSB, I mean having the bus do it for you. It's either process all security headers or none. If the service bus is acting as a pass-through, not processing the headers, you could read them yourself inside the proxy pipeline. But you would have to implement the decryption yourself, this won't be done by the bus. You could do this with a java callout, but I imagine it won't be trivial task.
I'd think this is pretty standard. The headers normally are intended for a service (maybe going through various intermediaries), hence the actor property of the headers, and that service should remove them after processing them. But I'm not familiar with Oracle's ESB to know if this is possible with it.

With recent calls , is it possible to save certain calls without saving them to contacts and delete the ones i dont want?

My question is ,
with the recent calls is the a way to save certain calls without saving them as contacts, and delete the others that i dont need? I am a truck driver and i need only certain calls during the day and if i could delete only the ones that arent needed for the day and keep the others that would make the day run smoother. Each is different and when the day is finished then i would delete the ones i needed for the day and start all over again. Is this possible?

I think you would have to reinstall the keys seeing that if you format the computer all the data is gone. Even though you backed up that data you never know what can happen when you try to reinstall certain apps. Not sure what method you can go by, you should run a diagnostics test to see how you computer is doing internally.
Goodluck

HT204025 Can I remove files from my computer without removing them from iCloud?

Can I remove files from my computer without removing them from iCloud?

Reason I'm asking: I did move a folder over, and then went to iCloud.com, and looked in that folder, and it said it was empty. Thanks
When you move a folder to iCloud Drive, it will upload the contents of this folder to iCloud Drive, but it may take a long tome, even for small items. You may see progress bars, while the contents is uploading. And the folder may look empty, until it will be updated from iCloud. For example - shortly after adding the folder "neueBilder" to iCloud Drive.

PIN TAB DISAPPEAR

I PIN MY GMAIL A/C WITH "PIN TAB", BUT IT OFTEN DISAPPEAR WHEN I START FIREFOX AGAIN.

App tabs and Tab Groups (Panorama) are stored as part of the session data in the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore
Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History" if Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.

Pin tabs disappear after crash

Firefox has been crashing me recently and every time it does, I lose all my pins. This is starting to get ridiculous.
I have the latest version. 22.
It is random, there is no set way to reproduce other then I start up firefox. It crashes. I wait and start it up again and all my pins are gone.

This doesn't restore the pinned tabs. I've tried it.

Can Apple unlock a phone under certain circumstances?

My friend recently committed suicide and the reasons were unknown, we are hoping to get some answers from her iPhone but it is locked. Can apple help under these circumstances?

Thanks for your advice. The problem is the family attempted to unlock the phone too many times and now the phone is disabled. Can Apple still try to recover

Firefox crashes, even in safe mode, under certain circumstances.

I'm using up-to-date Ubuntu Linux, other details below.
Firefox crashes, in or out of safe mode, when I do any of the following:
* right click (crashes on-click);
* view flash media (crashes once plugin container opens);
* try to use any of the file/edit etc menus (crashes when i click somewhere in this area);
* open about:tabs or about:config (crashes when i hit enter after typing into url bar);
* when i try to edit anything in about:config (crashes when i right-click);
* open any bookmark from my bookmarks toolbar (on-click).
In case it's related, thunderbird crashes soon after startup, i.e. once the GUI has opened and it starts checking my IMAP folders for mail.
It appears that for most purposes firefox will work indefinitely unless I do something I've mentioned above.
The extensions I run include X-marks and downthemall, but there may be more - I don't appear to be able to check without crashing the program.

Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Did you recently submitted other crash reports that do show a crashing thread?
If you have submitted crash reports then please post the IDs of one or more crash reports (bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website. 
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Does FP10 try to connect to adobe on being unloaded under certain circumstances?

Hello,
first time posting here. This is the details:
My company is provider for e-learning contents and a system to present the content to employess of our customers.
Our webapplication utilizes PHP,MySQL hosted on an Apache Webserver.
Some of our content includes 3rd-party flash movies which are made by a designer for us.
Now recently we have a new customer who is running a nuclear power plant. Safety restrictions given, none of the client computers has a connection to the internet but they are all connected via a network inhouse.
All went fine since some days ago where our customer approached us with a problem:
On freshly installed XP SP3 clients with an updated IE to Version 8 and the FP10 IE freezes for about 30-60secs when a content page (pure HTML) with a flash movie on it is left for the next content page.
Older XP SP3 clients with a recently updated IE to Version 8 and FP10 run smoothly though.
After checking the traffic on our server I found out that the browser is sending nothing to the server until the "freeze" is over.
Observing the traffic on the client with wireshark I can see that something tries to contact an URL under adobe.com.
Whenever I remove the flash from the content the next content page is loaded immediately like it should.
I have tried to rebuild a scenario in our office to find the issue but I can not get FP10 to send or try to retrieve anything out of the internet. I tried changing firewalling, pushing servers into a DMZ and out of it. Changed my clients "location" in the network, tried proxies etc., but no - it always works fine for me.
I have not enough experience with Adobe Flash to know those details but my guess is that the problem is not the FP10 but a security setting in the browser and/or XP itself. But for now I can only remove the problem with removing the flash and that's not the way I can go.
So is there a way to "enforce" FP10 to try to retrieve information from another location (e.g. adobe.com) and make the whole thing "freeze" with that?
Regards and thx in advance
Volker

I have the same problem as you when using flash in my intranet.
I have try everything as you.
My temporary solution is use debug version Flash Player.

Disable a button under certain circumstances and disable input fields

Scenario: My user receives a PDF (dymanic XML) where they fill in fields and click a Submit button to send the data to the server. They receive a confirmation copy of the form back. In our older version of Livecycle, the confirmation form was locked down - no fields were editable, the Submit button was disabled. We still need the ability to not input/change any data on the confirmation copy and not be able to click the Submit button. Under ES4, everything started out editable.
On the confirmation copy, there are messages that I check. When those messages are present I would like to hide the buttons (optimal solution) or at the very least, disable them so the user cannot resubmit the form again.
I've managed to put Javascript in place to lock down all input fields, I just can't get the script to work to hide the buttons. I'm beginning to wonder if the script to lock down all input fields is causing the scripts to hide the buttons to not work.
Sample code to disable editing of input fields:
- had to provide this code at the table level so that when a table flows to a second page, the fields are locked. When I put it at the page level or top level of the hierarchy, it only worked on the one page when I need it to cover fields that have flowed on to a second page. Even at the table level, there are still some tables that remain open until a change is made, then the fields on the second page become locked.
- when this is entered at the subform level, second page of the subform is modifiable
rfqHeader.rfqHeader.IssuerInfo::ready:layout - (JavaScript, client)
if (rfqHeader.rfqMessages.Message.rawValue != null)
// Get the field containers from each page.
for (var nPageCount = 0; nPageCount < xfa.host.numPages; nPageCount++)
var oFields = xfa.layout.pageContent(nPageCount, "field");
var nNodesLength = oFields.length;
// Set the field property.
for (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount++)
oFields.item(nNodeCount).access = "readOnly";
Sample code to make the button hidden:
rfqHeader.rfqFooter.button.SubmitButton::initialize - (JavaScript, client)
if (rfqMessages.Message.rawValue != null)
this.presence = "hidden" ;
Any help and suggestions would be welcome!
Thanks, Josie.

Hi Josie,
I think, for what you are trying to do, you must be in the doc:ready to be able to do this.
All because the doc:ready is the last event to be fired when a form is reopen...
rfqHeader.rfqFooter.button.SubmitButton::docReady - (JavaScript, client)
if (rfqMessages.Message.rawValue ! = null)
this.presence = "hidden" ;

Display of tabs disappears in certain website

We are having a display problem that disables tabs in corecon, a project management software.
please clik here to see the problem...
http://firefox-problems.blogspot.com/

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.

Scripts in /etc/profile.d seem not to work under certain circumstances

While already logged in, if I open up a terminal and run a script in /etc/profile.d/ to set environment variables, the changes don't seem to take. I can think of two examples:
1) Turning on KDE4 desktop integration in openoffice. I edited /etc/profile.d/openoffice.sh and changed OOO_FORCE_DESKTOP=KDE4, but when I ran the script I got an "export: command not found" error.
2) When replacing Sun Java with OpenJDK in order to compile and use 389-console from the AUR, I got caught up on one of the dependencies, ldapjdk (also from the AUR). The PKGBUILD for this package contains the following block of code:
which ant
if [ $? -eq 1 ]; then
. /etc/profile.d/apache-ant.sh
fi
ant dist
In theory this should work, as /etc/profile.d/apache-ant.sh contains the following two lines:
export ANT_HOME=/usr/share/java/apache-ant
export PATH=$PATH:$ANT_HOME/bin
However, upon running makepkg I got an error about "ant" not being in my path. To get around this I just edited the PKGBUILD and put the full path to ant, but this shouldn't have been necessary. The original PKGBUILD should have worked. I seem to have something out of whack and I don't quite know what. If anyone could be of assistance, it would be much appreciated.

I'm well aware of this. I never said that I started openoffice from the plasma menu. I never even started it. /etc/profile.d/openoffice.sh errored out without setting the environment variable in the current shell session. If it had worked, I would have been able to run openoffice from the terminal to test the new environment variable, which is what I was intending to do in the first place. There's no need to logout to test these sort of changes, they can be done from the terminal.
Your solution also doesn't address the problem I had in example #2, either. makepkg should be able to set environment variables in the current shell session, using the /etc/profile.d script detailed in the example. Running makepkg has nothing to do with my graphical session.
I know that logging out and back in will "fix" the problem, but that's not the point. The point is that a script which should be able to set an environment variable is not working properly.
Last edited by archtaku (2010-08-21 00:58:53)

Pinned tabs disappear under certain circumstances, without removing them yourself.

Similar Messages

Maybe you are looking for